YPY1105C-0005 [STANLEY]
Single Color Super Wide Angle Type (h=0.5 mm); 单色超广角型（ H = 0.5mm）的
| 型号： | YPY1105C-0005 |
| 厂家： | 
STANLEY ELECTRIC CO.,LTD. |
| 描述： | Single Color Super Wide Angle Type (h=0.5 mm) |
| 文件： | 总14页 (文件大小：256K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1105C-0005 Series
Single Color Super Wide Angle Type (h=0.5 mm)
Features
Package
Super Wide Angle Type (h=0.5mm), Water Clear resin
Product features
・ Outer Dimension 1.6 x 1.25 x 0.5mm ( L x W x H )
・Temperature range
Storage Temperature
Operating Temperature
: -40℃～100℃
: -40℃～ 85℃
・Lead–free soldering compatible
・RoHS compliant
Dominant wavelength
Spatial distribution
Yellow Green : 572nm(YPY)
Yellow
Orange
Red
: 590nm(FY)
: 605nm(FA)
: 626nm(FR)
180 deg.
AlGaInP
Die materials
Rank grouping parameter
Sorted by luminous intensity and wavelength per rank taping
Auto pick & place machine (Auto Mounter)
Assembly method
Soldering methods
Taping and reel
Reflow soldering and manual soldering
4,000pcs per reel in a 8mm width tape. (Standard)
Reel diameter: φ180mm
ESD
1kV (HBM)
Recommended Applications
Cellular Phone only
Page 1
2007.8.31
1105C-0005 Series
Single Color Super Wide Angle Type (h=0.5 mm)
Color and Luminous Intensity
(Ta=25℃)
Dominant
Wavelength
Luminous Intensity
Emitted
Color
Lens
Color
Part No.
Material
(nm)
λd
TYP.
Iv (mcd)
TYP.
IF
MIN.
4.0
IF
5
Yellow
Green
YPY1105C-0005 AlGaInP
572
590
605
626
5
5
5
5
10
16
16
16
FY1105C-0005 AlGaInP Yellow
FA1105C-0005 AlGaInP Orange
6.3
6.3
6.3
5
5
5
Water
Clear
FR1105C-0005 AlGaInP
Red
※Note : The above luminous intensity(Iv) is the setup values of the sorting machine.
(Tolerance : IV…±10%)
Page 2
2006.11.29
1105C-0005 Series
Single Color Super Wide Angle Type (h=0.5 mm)
Absolute Maximum Ratings
(Ta=25℃)
Absolute Maximum Ratings
Item
Symbol
Unit
YPY
36
FY
36
FA
36
FR
36
Power Dissipation
Pd
IF
mW
mA
Forward Current
Pulse Forward
15
48
15
48
15
48
15
48
IFRM
mA
※
1
Current
I
0.21
0.69
5
0.21
0.69
5
0.21
0.69
5
0.21
0.69
5
mA/
⊿
℃
F
Derating
(Ta=25 or higher)
℃
I
mA/
V
⊿
℃
FRM
Reverse Voltage
VR
Operating
Temperature
Topr
Tstg
-40 +85
～
℃
Storage Temperature
-40 +100
～
℃
※1 IFRMMeasurement condition : Pulse Width≦1ms., Duty≦1/20.
Page 3
2006.11.29
1105C-0005 Series
Single Color Super Wide Angle Type (h=0.5 mm)
Electro-Optical Characteristics
(Ta=25℃)
Characteristics
Item
Symbol
VF
Unit
Conditions
IF=5mA
YPY
FY
FA
FR
TYP.
MAX.
MAX.
TYP.
1.9
1.9
2.4
1.9
2.4
1.9
Forward Voltage
V
2.4
100
575
572
15
2.4
100
635
626
15
Reverse Current
Peak Wavelength
VR=5V
IF=5mA
IF=5mA
IF=5mA
IF=5mA
IR
100
592
590
15
100
609
605
15
A
μ
nm
nm
λp
λd
⊿λ
Dominant
Wavelength
Spectral Line Half
Width
TYP.
TYP.
nm
Half Intensity Angle
2
θ
1/2
TYP.
180
180
180
180
deg.
Page 4
2006.11.29
1105C-0005 Series
Single Color Super Wide Angle Type (h=0.5 mm)
(Ta=25℃)
Luminous Intensity Rank
Intensity Tolerance each Rank : +/- 10%
IV（mcd）
Rank
Condition
IF = 5mA
YPY
FY
FA
FR
MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.
A
B
C
D
E
4.0
6.3
10.0
16.0
25.0
6.3
10.0
16.0
25.0
-
6.3
10.0
16.0
25.0
40.0
10.0
16.0
25.0
40.0
-
6.3
10.0
16.0
25.0
40.0
10.0
16.0
25.0
40.0
-
6.3
10.0
16.0
25.0
40.0
10.0
16.0
25.0
40.0
-
※ Please contact our sales staff concerning rank designation.
※ Please contact our sales staff concerning rank designation.
Page 5
2006.11.29
1105C-0005 Series
Single Color Super Wide Angle Type (h=0.5 mm)
(Ta=25℃)
Color Tone Groups (λd)
Dominant Wavelength λd (nm)
FY FA
MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.
566.0 578.0 581.5 585.0 596.1 600.9 621.0 632.0
584.0 587.5 599.1 603.9
Rank
Condition
IF = 5mA
YPY
FR
A
B
C
D
E
586.5 590.0 602.1 606.9
589.0 592.5 605.1 609.9
591.5 595.0 608.1 612.9
F
594.0 597.5
※ Please contact our sales staff concerning rank designation.
Page 6
2006.11.29
1105C-0005 Series
Single Color Super Wide Angle Type (h=0.5 mm)
Technical Data(YPY/FY/FA/FR)
Spectral Distribution
Relative Intensity vs. Wavelength
Condition : Ta = 25℃, IF = 5mA
Spatial Distribution Example
Condition : Ta = 25℃
Wavelength [nm]
Forward Voltage vs. Forward Current
Forward Current vs. Relative Intensity
Condition : Ta = 25℃
Condition : Ta = 25℃
Forward Voltage VF(V)
Forward Current IF(mA)
Page 7
2006.11.29
1105C-0005 Series
Single Color Super Wide Angle Type (h=0.5 mm)
Technical Data(YPY/FY/FA/FR)
Derating
Ambient Temperature vs. Relative Intensity
Ambient Temperature vs. Maximum Forward Current
Repetition Frequency : f ≧ 50Hz
Ambient Temperature : Ta(℃)
Ambient Temperature : Ta(℃)
Power Dissipation vs. Ambient Temperature
Pulse Width vs. Maximum Tolerable Peak Current
Condition : Ta = 25℃
Ambient Temperature : Ta(℃)
Pulse Width : tw (μs)
Page 8
2006.11.29
1105C-0005 Series
Single Color Super Wide Angle Type (h=0.5 mm)
Technical Data(YPY/FY/FA/FR)
Duty Cycle vs. Maximum Forward Current
Ambient Temperature vs. Forward Voltage
Duty(%)
Ambient Temperature : Ta(℃)
Page 9
2006.11.29
1105C-0005 Series
Single Color Super Wide Angle Type (h=0.5 mm)
(Unit: mm)
Package Dimensions
Weight: (1.32)mg
(Unit: mm)
Recommended Soldering Pattern
Taping Specification
(Unit: mm)
Quantity : 4,000pcs/ reel (standard)
Page 10
2007.10.12
1105C-0005 Series
Single Color Super Wide Angle Type (h=0.5 mm)
Reflow Soldering Conditions
1) The above profile temperature gives the maximum temperature of the LED resin surface.
Please set the temperature so as to avoid exceeding this range.
2) Total times of reflow soldering process shall be no more than 2 times.
When the second reflow soldering process is performed, intervals between the first
and second reflow should be short as possible (while allowing some time for the
component to return to normal temperature after the first reflow) in order to prevent the
LED from absorbing moisture.
3) Temperature fluctuation to the LED during the pre-heating process shall be minimized.
(6 maximum)
Manual Soldering Conditions
Iron tip temp.
Soldering time and frequency
(MAX.)
(MAX.)
350
3 s
1 time (MAX.)
Page 11
2007.8.31
1105C-0005 Series
Single Color Super Wide Angle Type (h=0.5 mm)
Handling
These types are designed chiefly for Cellular phone application, and are setting the thickness of the
Product to about 0.4-0.5 mm thinly.To achieve the tin type of the product, making each material thin
is aimed at. Because they are inferior to our general LEDs by an external stress, please use these product
types after paying attention to the following.
1)Please set the mounting load to Max. 2N.
2)Please do not increase more quantity of the soldering paste than necessary quantity
(The thickness of stencil Mask : about 100-120μ), because the terminal area of the product is small.
3)Please avoid the collision of the mounting board etc. after LEDs were mounted on the substrate.
4)When warp of substrate is large after these were mounted on FPC etc, please use these product types
after affirming these is no problem.
5)Please use these product types after affirming there is no problem about the mounting position etc.
of product from substrate edge, when mounting them on multi-layer and multi-piece PCBs.
Page 12
2006.11.29
1105C-0005 Series
Single Color Super Wide Angle Type (h=0.5 mm)
Reliability Testing Result
Reliability Testing Result Applicable Standard
Testing Conditions
Duration
1,000 h
Failure
0/25
Room Temp.
EIAJ ED-
F
Ta = 25℃, I = Maxium Rated Current
Operating Life
4701/100(101)
Pre-heating : 150～180℃ 120s Max.
Operation Heating : 230℃ 40s Max.
Peak Temperature : 260℃
Minimum Rated Storage Temperature(30min)
～Normal Temperature(15min)
Resistance to
Soldering Heat
EIAJ ED-
4701/300(301)
Twice
0/25
0/25
EIAJ ED-
4701/100(105)
Temperature Cycling
5 cycles
～Maximum Rated Storage Temperature(30min)
～Normal Temperature(15min)
Wet High Temp.
Storage Life
EIAJ ED-
4701/100(103)
Ta = 60±2℃, RH = 90±5%
1,000 h
1,000 h
1,000 h
2 h
0/25
0/25
0/25
0/10
High Temp.
Storage Life
EIAJ ED-
4701/200(201)
Ta = Maximum Rated Storage Temperature
Low Temp.
Storage Life
EIAJ ED-
4701/200(202)
Ta = Minimum Rated Storage Temperature
98.1m/s2 (10G), 100 ～ 2KHz sweep for 20min.,
XYZ each direction
Vibration,
Variable Frequency
EIAJ ED-
4701/400(403)
Failure Criteria
Items
Symbols
Conditions
Failure criteria
F
I Value of each product
Luminous Intensity
Luminous Intensity
Iv
Testing Min. Value ＜ Spec. Min. Value x 0.5
Testing Max. Value ≧ Spec. Max. Value x 1.2
Testing Max. Value ≧ Spec. Max. Value x 2.5
F
I Value of each product
F
Forward Voltage
Reverse Current
V
Forward Voltage
R
V = Maximum Rated
R
I
Reverse Voltage V
Occurrence of notable decoloration,
deformation and cracking
Cosmetic Appearance
-
-
Page 13
2007.8.31
1105C-0005 Series
Single Color Super Wide Angle Type (h=0.5 mm)
Special Notice to Customers Using the Products and
Technical Information Shown in This Data Sheet
1) The technical information shown in the data sheets are limited to the typical characteristics and circuit
examples of the referenced products. It does not constitute the warranting of industrial property nor the
granting of any license.
2) For the purpose of product improvement, the specifications, characteristics and technical data described in
the data sheets are subject to change without prior notice. Therefore it is recommended that the most
updated specifications be used in your design.
3) When using the products described in the data sheets, please adhere to the maximum ratings for operating
voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any
damage which may occur if these specifications are exceeded.
4) The products that have been described to this catalog are manufactured so that they will be used for the
electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home
appliance and measuring instrument).
The application of aircrafts, space borne application, transportation equipment, medical equipment and
nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong
operation might influence the life or the human body. Please consult us beforehand if you plan to use our
product for the usages of aircrafts, space borne application, transportation equipment, medical equipment
and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV
machine, home appliance and measuring instrument.
5) In order to export the products or technologies described in this data sheet which are under the
“Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the
Japanese government.
6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley
Electric Co., Ltd.
7) The most updated edition of this data sheet can be obtained from the address below:
http://www.stanley-components.com
Page 14
2007.8.31
相关型号：
©2020 ICPDF网 联系我们和版权申明