S29GL032A11FAIR30_技术文档

ADVANCE

INFORMATION

S29GLxxxA MirrorBit™ Flash Family

S29GL064A, S29GL032A

64 Megabit, 32 Megabit 3.0, Volt-only Page Mode Flash

Memory Featuring 200 nm MirrorBit Process Technology

Data Sheet

Notice to Readers: The Advance Information status indicates that this

document contains information on one or more products under development

at Spansion LLC. The information is intended to help you evaluate this product.

Do not design in this product without contacting the factory. Spansion LLC

reserves the right to change or discontinue work on this proposed product

without notice.

Publication Number S29GLxxxA_00 Revision A Amendment 2 Issue Date January 28, 2005

This page intentionally left blank.

S29GLxxxA MirrorBit™ Flash Family

S29GL064A, S29GL032A

64 Megabit, 32 Megabit 3.0, Volt-only Page Mode Flash

Memory Featuring 200 nm MirrorBit Process Technology

ADVANCE

INFORMATION

Data Sheet

Distinctive Characteristics

Package options

— 48-pin TSOP

— 56-pin TSOP

— 64-ball Fortified BGA

— 48-ball fine-pitch BGA

Architectural Advantages

Single power supply operation

— 3 volt read, erase, and program operations

Manufactured on 200 nm MirrorBit process

technology

Secured Silicon Sector region

Software & Hardware Features

— 128-word/256-byte sector for permanent, secure

identification through an 8-word/16-byte random

Electronic Serial Number, accessible through a

command sequence

— May be programmed and locked at the factory or by

the customer

Software features

— Program Suspend & Resume: read other sectors

before programming operation is completed

— Erase Suspend & Resume: read/program other

sectors before an erase operation is completed

— Data# polling & toggle bits provide status

— CFI (Common Flash Interface) compliant: allows host

system to identify and accommodate multiple flash

devices

Flexible sector architecture

— 64Mb (uniform sector models): 128 32 Kword (64 KB)

sectors

— 64Mb (boot sector models): 127 32 Kword (64 KB)

sectors + 8 4Kword (8KB) boot sectors

— Unlock Bypass Program command reduces overall

multiple-word programming time

— 32Mb (uniform sector models): 64 32Kword (64KB)

sectors

Hardware features

— Sector Group Protection: hardware-level method of

preventing write operations within a sector group

— Temporary Sector Unprotect: V_ID-level method of

charging code in locked sectors

— WP#/ACC input accelerates programming time

(when high voltage is applied) for greater throughput

during system production. Protects first or last sector

regardless of sector protection settings on uniform

sector models

— 32Mb (boot sector models): 63 32Kword (64KB)

sectors + 8 4Kword (8KB) boot sectors

Compatibility with JEDEC standards

— Provides pinout and software compatibility for single-

power supply flash, and superior inadvertent write

protection

100,000 erase cycles typical per sector

20-year data retention typical

— Hardware reset input (RESET#) resets device

— Ready/Busy# output (RY/BY#) detects program or

erase cycle completion

Performance Characteristics

High performance

— 90 ns access time

— 4-word/8-byte page read buffer

— 25 ns page read times

— 16-word/32-byte write buffer which reduces overall

programming time for multiple-word updates

Low power consumption (typical values at 3.0 V, 5

MHz)

— 18 mA typical active read current

— 50 mA typical erase/program current

— 1 µA typical standby mode current

Publication Number S29GLxxxA_00 Revision A Amendment 2 Issue Date January 28, 2005

This document contains information on one or more products under development at Spansion LLC. The information is intended to help you evaluate this product. Do not

design in this product without contacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed product without notice.

A d v a n c e I n f o r m a t i o n

Notice On Data Sheet Designations

Spansion LLC issues data sheets with Advance Information or Preliminary designations to advise

readers of product information or intended specifications throughout the product life cycle, in-

cluding development, qualification, initial production, and full production. In all cases, however,

readers are encouraged to verify that they have the latest information before finalizing their de-

sign. The following descriptions of Spansion data sheet designations are presented here to high-

light their presence and definitions.

Advance Information

The Advance Information designation indicates that Spansion LLC is developing one or more spe-

cific products, but has not committed any design to production. Information presented in a doc-

ument with this designation is likely to change, and in some cases, development on the product

may discontinue. Spansion LLC therefore places the following conditions upon Advance Informa-

tion content:

“This document contains information on one or more products under development at Spansion LLC. The

information is intended to help you evaluate this product. Do not design in this product without con-

tacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed

product without notice.”

Preliminary

The Preliminary designation indicates that the product development has progressed such that a

commitment to production has taken place. This designation covers several aspects of the prod-

uct life cycle, including product qualification, initial production, and the subsequent phases in the

manufacturing process that occur before full production is achieved. Changes to the technical

specifications presented in a Preliminary document should be expected while keeping these as-

pects of production under consideration. Spansion places the following conditions upon Prelimi-

nary content:

“This document states the current technical specifications regarding the Spansion product(s) described

herein. The Preliminary status of this document indicates that product qualification has been completed,

and that initial production has begun. Due to the phases of the manufacturing process that require

maintaining efficiency and quality, this document may be revised by subsequent versions or modifica-

tions due to changes in technical specifications.”

Combination

Some data sheets will contain a combination of products with different designations (Advance In-

formation, Preliminary, or Full Production). This type of document will distinguish these products

and their designations wherever necessary, typically on the first page, the ordering information

page, and pages with DC Characteristics table and AC Erase and Program table (in the table

notes). The disclaimer on the first page refers the reader to the notice on this page.

Full Production (No Designation on Document)

When a product has been in production for a period of time such that no changes or only nominal

changes are expected, the Preliminary designation is removed from the data sheet. Nominal

changes may include those affecting the number of ordering part numbers available, such as the

addition or deletion of a speed option, temperature range, package type, or V range. Changes

IO

may also include those needed to clarify a description or to correct a typographical error or incor-

rect specification. Spansion LLC applies the following conditions to documents in this category:

“This document states the current technical specifications regarding the Spansion product(s) described

herein. Spansion LLC deems the products to have been in sufficient production volume such that sub-

sequent versions of this document are not expected to change. However, typographical or specification

corrections, or modifications to the valid combinations offered may occur.”

Questions regarding these document designations may be directed to your local AMD or Fujitsu

sales office.

2

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

General Description

The S29GLxxxA family of devices are 3.0 V single power Flash memory manufac-

tured using 200 nm MirrorBit technology. The S29GL064A is a 64 Mb, organized

as 4,194,304 words or 8,388,608 bytes. The S29GL032A is a 32 Mb, organized

as 2,097,152 words or 4,194,304 bytes. Depending on the model number, the

devices have an 8-bit wide data bus only, 16-bit wide data bus only, or a 16-bit

wide data bus that can also function as an 8-bit wide data bus by using the BYTE#

input. The devices can be programmed either in the host system or in standard

EPROM programmers.

Access times as fast as 90 ns are available. Note that each access time has a spe-

cific operating voltage range (V_CC) as specified in the Product Selector Guide and

the Ordering Information sections. Package offerings include 48-pin TSOP, 56-pin

TSOP, 48-ball fine-pitch BGA and 64-ball Fortified BGA, depending on model num-

ber. Each device has separate chip enable (CE#), write enable (WE#) and output

enable (OE#) controls.

Each device requires only a single 3.0 volt power supply for both read and

write functions. In addition to a V_CCinput, a high-voltage accelerated program

(ACC) feature provides shorter programming times through increased current on

the WP#/ACC input. This feature is intended to facilitate factory throughput dur-

ing system production, but may also be used in the field if desired.

The device is entirely command set compatible with the JEDEC single-power-

supply Flash standard. Commands are written to the device using standard mi-

croprocessor write timing. Write cycles also internally latch addresses and data

needed for the programming and erase operations.

The sector erase architecture allows memory sectors to be erased and repro-

grammed without affecting the data contents of other sectors. The device is fully

erased when shipped from the factory.

Device programming and erasure are initiated through command sequences.

Once a program or erase operation has begun, the host system need only poll the

DQ7 (Data# Polling) or DQ6 (toggle) status bits or monitor the Ready/Busy#

(RY/BY#) output to determine whether the operation is complete. To facilitate

programming, an Unlock Bypass mode reduces command sequence overhead

by requiring only two write cycles to program data instead of four.

Hardware data protection measures include a low V_CCdetector that automat-

ically inhibits write operations during power transitions. The hardware sector

protection feature disables both program and erase operations in any combina-

tion of sectors of memory. This can be achieved in-system or via programming

equipment.

The Erase Suspend/Erase Resume feature allows the host system to pause an

erase operation in a given sector to read or program any other sector and then

complete the erase operation. The Program Suspend/Program Resume fea-

ture enables the host system to pause a program operation in a given sector to

read any other sector and then complete the program operation.

The hardware RESET# pin terminates any operation in progress and resets the

device, after which it is then ready for a new operation. The RESET# pin may be

tied to the system reset circuitry. A system reset would thus also reset the device,

enabling the host system to read boot-up firmware from the Flash memory

device.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

3

A d v a n c e I n f o r m a t i o n

The device reduces power consumption in the standby mode when it detects

specific voltage levels on CE# and RESET#, or when addresses have been stable

for a specified period of time.

The Write Protect (WP#) feature protects the first or last sector by asserting

a logic low on the WP#/ACC pin or WP# pin, depending on model number. The

protected sector will still be protected even during accelerated programming.

The Secured Silicon Sector provides a 128-word/256-byte area for code or

data that can be permanently protected. Once this sector is protected, no further

changes within the sector can occur.

Spansion MirrorBit flash technology combines years of Flash memory manufac-

turing experience to produce the highest levels of quality, reliability and cost

effectiveness. The device electrically erases all bits within a sector simultaneously

via hot-hole assisted erase. The data is programmed using hot electron injection.

4

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Table of Contents

Write Pulse “Glitch” Protection ...............................................................38

Logical Inhibit ...................................................................................................38

Power-Up Write Inhibit ...............................................................................38

General Description . . . . . . . . . . . . . . . . . . . . . . . . .3

Product Selector Guide . . . . . . . . . . . . . . . . . . . . . .7

S29GL064A, S29GL032A ....................................................................................7

Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Pin Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Logic Symbol-S29GL064A (Model R6, R7) .................................................. 14

Common Flash Memory Interface (CFI) . . . . . . . 39

Table 21. CFI Query Identification String ...............................39

Table 22. System Interface String........................................ 40

Command Definitions . . . . . . . . . . . . . . . . . . . . . . 43

Ordering Information-S29GL032A . . . . . . . . . . . . 15

S29GL032A Standard Products .......................................................................15

Table 1. S29GL032A Ordering Options ................................. 16

Ordering Information-S29GL064A . . . . . . . . . . . . 17

S29GL064A Standard Products .......................................................................17

Table 2. S29GL064A Valid Combinations .............................. 18

Device Bus Operations . . . . . . . . . . . . . . . . . . . . . . 19

Table 3. Device Bus Operations ........................................... 19

Word/Byte Configuration ................................................................................20

Requirements for Reading Array Data ........................................................ 20

Page Mode Read ............................................................................................. 20

Writing Commands/Command Sequences ................................................ 20

Write Buffer ..................................................................................................... 21

Accelerated Program Operation ............................................................... 21

Autoselect Functions ..................................................................................... 21

Standby Mode ....................................................................................................... 21

Reading Array Data ........................................................................................... 43

Reset Command ................................................................................................. 43

Autoselect Command Sequence ...................................................................44

Enter Secured Silicon Sector/Exit Secured Silicon

Sector Command Sequence ............................................................................44

Word Program Command Sequence ......................................................44

Unlock Bypass Command Sequence ........................................................ 45

Write Buffer Programming ......................................................................... 45

Accelerated Program .................................................................................... 47

Figure 3. Write Buffer Programming Operation....................... 48

Figure 4. Program Operation ............................................... 49

Program Suspend/Program Resume Command Sequence ....................49

Figure 5. Program Suspend/Program Resume........................ 50

Chip Erase Command Sequence ...................................................................50

Sector Erase Command Sequence . . . . . . . . . . . 52

Figure 6. Erase Operation ................................................... 53

Erase Suspend/Erase Resume Commands ...................................................53

Command Definitions ........................................................................................55

Automatic Sleep Mode ..................................................................................... 22

RESET#: Hardware Reset Pin ........................................................................ 22

Output Disable Mode ....................................................................................... 22

Table 4. S29GL032M (Models R1, R2) Sector Addresses ......... 23

Table 5. S29GL032M (Models R3) Top Boot Sector Addresses . 24

Table 6. S29GL032M (Models R4) Bottom Boot

Table 25. Command Definitions (x16 Mode, BYTE# = V_IH

) ......55

Table 26. Command Definitions (x8 Mode, BYTE# = V_IL) .........56

Write Operation Status ....................................................................................57

DQ7: Data# Polling ........................................................................................... 57

Figure 7. Data# Polling Algorithm ........................................ 58

RY/BY#: Ready/Busy# .......................................................................................58

DQ6: Toggle Bit I ................................................................................................59

Figure 8. Toggle Bit Algorithm ............................................. 60

DQ2: Toggle Bit II ................................................................................................61

Reading Toggle Bits DQ6/DQ2 ......................................................................61

DQ5: Exceeded Timing Limits .........................................................................61

DQ3: Sector Erase Timer ................................................................................62

DQ1: Write-to-Buffer Abort ...........................................................................62

Table 27. Write Operation Status .........................................63

Absolute Maximum Ratings ..............................................................................64

Figure 9. Maximum Negative Overshoot Waveform................. 64

Figure 10. Maximum Positive

Overshoot Waveform.......................................................... 64

Operating Ranges . . . . . . . . . . . . . . . . . . . . . . . . . 64

DC Characteristics . . . . . . . . . . . . . . . . . . . . . . . . 65

Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Figure 11. Test Setup......................................................... 66

Table 28. Test Specifications ...............................................66

Key to Switching Waveforms . . . . . . . . . . . . . . . . 66

Figure 12. Input Waveforms and Measurement Levels ............ 66

Read-Only Operations-S29GL064A only ................................................... 67

Read-Only Operations-S29GL032A only .................................................... 67

Figure 13. Read Operation Timings....................................... 68

Figure 14. Page Read Timings.............................................. 68

Hardware Reset (RESET#) ..............................................................................69

Figure 15. Reset Timings .................................................... 69

Erase and Program Operations-S29GL064A Only ..................................70

Erase and Program Operations-S29GL032A Only ....................................71

Figure 16. Program Operation Timings.................................. 72

Figure 17. Accelerated Program Timing Diagram.................... 72

Sector Addresses .............................................................. 24

Table 7. S29GL064A (Models R1, R2, R8, R9) Sector Addresses 25

Table 8. S29GL064A (Model R3) Top Boot Sector Addresses ... 26

Table 9. S29GL064A (Model R4) Bottom Boot Sector Addresses 27

Table 10. S29GL064A (Model R5) Sector Addresses ............... 28

Table 11. S29GL064A (Models R6, R7) Sector Addresses ........ 29

Autoselect Mode ................................................................................................ 30

Table 12. Autoselect Codes, (High Voltage Method) .............. 31

Sector Group Protection and Unprotection ...............................................31

Table 13. S29GL032A (Models R1, R2) Sector Group Protection/Un-

protection Addresses ......................................................... 32

Table 14. S29GL032A (Models R3) Sector Group Protection/Unpro-

tection Address Table ......................................................... 32

Table 15. S29GL032A (Models R4) Sector Group Protection/Unpro-

tection Address Table ......................................................... 32

Table 16. S29GL064A (Models R1, R2, R8, R9) Sector Group Protec-

tion/Unprotection Addresses ............................................... 32

Table 17. S29GL064A (Model R3) Top Boot Sector Protection/Unpro-

tection Addresses .............................................................. 33

Table 18. S29GL064A (Model R4) Bottom Boot Sector Protection/

Unprotection Addresses ...................................................... 33

Table 19. S29GL064A (Model R5) Sector Group Protection/Unpro-

tection Addresses .............................................................. 33

Table 20. S29GL064A (Models R6, R7) Sector Group Protection/Un-

protection Addresses ......................................................... 33

Temporary Sector Group Unprotect ...........................................................34

Figure 1. Temporary Sector Group Unprotect Operation .......... 34

Figure 2. In-System Sector Group Protect/Unprotect Algorithms 35

Secured Silicon Sector Flash Memory Region ............................................36

Write Protect (WP#) ........................................................................................37

Hardware Data Protection ..............................................................................37

Low VCC Write Inhibit ................................................................................37

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

5

A d v a n c e I n f o r m a t i o n

Figure 18. Chip/Sector Erase Operation Timings..................... 73

Figure 19. Data# Polling Timings

Program Operations-S29GL032A ..................................................................78

Figure 24. Alternate CE# Controlled Write

(During Embedded Algorithms)............................................ 73

Figure 20. Toggle Bit Timings (During Embedded Algorithms) .. 74

Figure 21. DQ2 vs. DQ6 ...................................................... 74

Temporary Sector Unprotect .........................................................................75

Figure 22. Temporary Sector Group Unprotect Timing Diagram 75

Figure 23. Sector Group Protect and Unprotect Timing Diagram 76

Alternate CE# Controlled Erase and

(Erase/Program) Operation Timings ..................................... 79

Erase And Programming Performance . . . . . . . . 80

TSOP Pin and BGA Package Capacitance . . . . . 81

TS048—48-Pin Standard Thin Small Outline Package (TSOP) ............82

TS056—56-Pin Standard Thin Small Outline Package (TSOP) .............83

LAA064—64-Ball Fortified Ball Grid Array (BGA) ..................................84

Revision Summary . . . . . . . . . . . . . . . . . . . . . . . . . 86

Program Operations-S29GL064A ..................................................................77

Alternate CE# Controlled Erase and

6

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Product Selector Guide

S29GL064A, S29GL032A

Part Number

S29GL064A

S29GL032A

Speed Option

90

25

10

100

30

11

110

30

90

25

10

100

30

11

110

30

Max. Access Time (ns)

Max. CE# Access Time (ns)

Max. Page Access Time (ns)

Max. OE# Access Time (ns)

30

Block Diagram

DQ15–DQ0 (A-1)

RY/BY#

V_CC

Sector Switches

V_SS

Erase Voltage

Generator

Input/Output

Buffers

RESET#

WE#

WP#/ACC

BYTE#

State

Control

Command

Register

PGM Voltage

Generator

Data

Latch

Chip Enable

Output Enable

Logic

STB

CE#

OE#

Y-Decoder

Y-Gating

STB

V_CCDetector

Timer

Cell Matrix

X-Decoder

A_Max**–A0

Note:

**A

GL064A = A21.

MAX

GL032A = A20.

MAX

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

7

A d v a n c e I n f o r m a t i o n

Connection Diagrams

A15

A14

A13

A12

A11

A10

A9

1

2

3

4

5

6

7

8

48

47

46

45

44

43

42

41

40

39

38

37

36

35

34

33

32

31

30

29

28

27

26

25

A16

1

BYTE#

V_SS

DQ15/A-1

DQ7

DQ14

DQ6

DQ13

DQ5

DQ12

DQ4

V_CC

DQ11

DQ3

DQ10

DQ2

DQ9

DQ1

DQ8

DQ0

OE#

V_SS

CE#

A0

A8

48-Pin Standard TSOP

1

A19

9

A20

WE#

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

RESET#

1,2

A21

1

WP#/ACC

RY/BY#

A18

A17

A7

A6

A5

A4

A3

A2

A1

Notes:

1. Pin 9 is A21, Pin 13 is ACC, Pin 14 is WP#, Pin 15 is A19, and Pin 47 is V on S29GL064A (models R6, R7).

IO

2. Pin 13 is NC on S29GL032A.

NC

1

2

3

4

5

6

7

8

9

56 NC

55 NC

A15

A14

A13

A12

A11

A10

A9

54 A16

53 BYTE#

52 V_SS

51 DQ15/A-1

50 DQ7

49 DQ14

48 DQ6

47 DQ13

46 DQ5

45 DQ12

44 DQ4

43 V_CC

56-Pin Standard TSOP

A8 10

A19 11

A20 12

WE# 13

RESET# 14

A21¹15

WP#/ACC 16

RY/BY# 17

A18 18

A17 19

A7 20

42 DQ11

41 DQ3

40 DQ10

39 DQ2

38 DQ9

37 DQ1

36 DQ8

35 DQ0

34 OE#

33 V_SS

A6 21

A5 22

A4 23

A3 24

A2 25

32 CE#

31 A0

A1 26

NC 27

30 NC

NC 28

29 V_IO

Notes:

1. Pin 15 is NC on S29GL032A.

8

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

64-ball Fortified BGA

Top View, Balls Facing Down

A8

B8

C8

D8

E8

F8

G8

NC

H8

1

NC

V_IO

V_SS

NC

A7

B7

C7

D7

E7

F7

G7

H7

BYTE#²DQ15/A-1

V_SS

A13

A12

A14

A15

A16

A6

A9

B6

A8

C6

D6

E6

F6

G6

H6

A10

A11

DQ7

DQ14

DQ13

DQ6

A5

B5

C5

D5

E5

F5

G5

H5

3

V_CC

WE# RESET# A21

A19

DQ5

DQ12

DQ4

A4

B4

C4

D4

E4

F4

G4

H4

RY/BY# WP#/ACC A18

A20

DQ2

DQ10

DQ11

DQ3

A3

A7

B3

C3

A6

D3

A5

E3

F3

G3

H3

A17

DQ0

DQ8

DQ9

DQ1

A2

A3

B2

A4

C2

A2

D2

A1

E2

A0

F2

G2

H2

V_SS

CE#

OE#

A1

B1

C1

D1

E1

F1

G1

NC

H1

4

NC

V_IO

Notes:

1. Ball D8 and Ball F1 are NC on S29GL064A (models R3, R4).

2. Ball F7 is NC on S29GL064A (model R5).

3. Ball C5 is NC on S29GL032A.

Special Package Handling Instructions

Special handling is required for Flash Memory products in moulded packages

(TSOP and BGA). The package and/or data integrity may be compromised if the

package body is exposed to temperatures above 150°C for prolonged periods of

time.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

9

A d v a n c e I n f o r m a t i o n

48-ball Fine-pitch BGA

Top View, Balls Facing Down

A6

B6

C6

D6

E6

F6

G6

H6

BYTE#¹DQ15/A-1

V_SS

A13

A12

A14

A15

A16

A5

A9

B5

A8

C5

D5

E5

F5

G5

H5

A10

A11

DQ7

DQ14

DQ13

DQ6

A4

B4

C4

D4

E4

F4

G4

H4

2

V_CC

WE# RESET# A21

A19

DQ5

DQ12

DQ4

A3

B3

C3

D3

E3

F3

G3

H3

RY/BY# WP#/ACC A18

A20

DQ2

DQ10

DQ11

DQ3

A2

A7

B2

C2

A6

D2

A5

E2

F2

G2

H2

A17

DQ0

DQ8

DQ9

DQ1

A1

A3

B1

A4

C1

A2

D1

A1

E1

A0

F1

G1

H1

V_SS

CE#

OE#

Notes:

1. Ball F6 is V on S29GL064A (models R5).

IO

2. Ball C4 is NC on S29GL032A.

Special Package Handling Instructions

Special handling is required for Flash Memory products in molded packages

(TSOP and BGA). The package and/or data integrity may be compromised if the

package body is exposed to temperatures above 150°C for prolonged periods of

time.

10

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Pin Descriptions

A21–A0

A20–A0

DQ7–DQ0

DQ14–DQ0

DQ15/A-1

=

22 Address inputs

21 Address inputs

8 Data inputs/outputs

15 Data inputs/outputs

DQ15 (Data input/output, word mode), A-1 (LSB

Address input, byte mode)

Chip Enable input

Output Enable input

Write Enable input

CE#

OE#

WE#

WP#/ACC

=

Hardware Write Protect input/Programming

Acceleration input

ACC

WP#

RESET#

RY/BY#

BYTE#

V_CC

=

Acceleration input

Hardware Write Protect input

Hardware Reset Pin input

Ready/Busy output

Selects 8-bit or 16-bit mode

3.0 volt-only single power supply

(see Product Selector Guide for speed options and

voltage supply tolerances)

Device Ground

V_SS

NC

V_IO

=

Pin Not Connected Internally

Output Buffer Power

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

11

A d v a n c e I n f o r m a t i o n

Logic Symbol-S29GL032A (Models R1, R2)

21

A20–A0

16 or 8

DQ15–DQ0

(A-1)

CE#

OE#

WE#

WP#/ACC

RESET#

BYTE#

RY/BY#

V

IO

Logic Symbol-S29GL032A (Models R3, R4)

21

A20–A0

16 or 8

DQ15–DQ0

CE#

OE#

WE#

(A-1)

WP#/ACC

RESET#

RY/BY#

BYTE#

12

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Logic Symbol-S29GL064A (Models R1, R2, R8, R9)

22

A21–A0

16 or 8

DQ15–DQ0

(A-1)

CE#

OE#

WE#

WP#/ACC

RESET#

BYTE#

RY/BY#

V

IO

Logic Symbol-S29GL064A (Models R3, R4)

22

A21–A0

16 or 8

DQ15–DQ0

CE#

(A-1)

OE#

WE#

WP#/ACC

RESET#

BYTE#

RY/BY#

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

13

A d v a n c e I n f o r m a t i o n

Logic Symbol-S29GL064A (Model R5)

22

A21–A0

16

DQ15–DQ0

CE#

OE#

WE#

ACC

RESET#

V

RY/BY#

IO

Logic Symbol-S29GL064A (Model R6, R7)

22

A21–A0

16

DQ15–DQ0

CE#

OE#

WE#

WP#

ACC

RESET#

V

IO

14

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Ordering Information-S29GL032A

S29GL032A Standard Products

Standard products are available in several packages and operating ranges. The

order number (Valid Combination) is formed by a combination of the following:

S29GL032A

90

T

A

I

R1

0

PACKING TYPE

0

2

3

=

Tray

7” Tape and Reel

13” Tape and Reel

MODEL NUMBER

R1

R2

R3

R4

=

x8/x16, V_CC=3.0-3.6V, Uniform sector device, highest address sector

protected when WP#/ACC=V_IL

x8/x16, V_CC=3.0-3.6V, Uniform sector device, lowest address sector

protected when WP#/ACC=V_IL

x8/x16, V_CC=3.0-3.6V, Top boot sector device, top two address sectors

protected when WP#/ACC=V_IL

x8/x16, V_CC=3.0-3.6V, Bottom boot sector device, bottom two

address sectors protected when WP#/ACC=V_IL

TEMPERATURE RANGE

I

= Industrial (–40°C to +85°C)

PACKAGE MATERIAL SET

A

F

=

Standard

Pb-Free

PACKAGE TYPE

T

B

F

=

Thin Small Outline Package (TSOP) Standard Pinout

Fine-pitch Ball-Grid Array Package

Fortified Ball-Grid Array Package

SPEED OPTION

See Product Selector Guide and Valid Combinations

DEVICE NUMBER/DESCRIPTION

S29GL032A

32 Megabit Page-Mode Flash Memory Manufactured using 200 nm MirrorBit™

Process Technology, 3.0 Volt-only Read, Program, and Erase

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

15

A d v a n c e I n f o r m a t i o n

Table 1. S29GL032A Ordering Options

S29GL032A Valid Combinations

Package Description

(Notes)

Device

Number

Speed

Option

Package, Material,

Model

Number

Packing

Type

& Temperature Range

TAI,TFI

TS056 (2)

TSOP

R1,R2

R3,R4

FAI,FFI

LAA064 (3)

TS048 (2)

FBC048 (3)

LAA064 (3)

Fortified BGA

TSOP

0,2,3

(Note 1)

S29GL032A

90, 10, 11

TAI,TFI

BAI,BFI

Fine-Pitch BGA

Fortified BGA

FAI,FFI

Notes:

1. Type 0 is standard. Specify others as required: TSOPs can be packed in Types 0 and 3; BGAs can

be packed in Types 0, 2, or 3.

2. TSOP package marking omits packing type designator from the ordering part number.

3. BGA package marking omits leading “S29” and packing type designator from the ordering part

number.

Valid Combinations

Valid Combinations list configurations planned to be supported in volume for this device. Consult

your local sales office to confirm availability of specific valid combinations and to check on newly

released combinations.

16

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Ordering Information-S29GL064A

S29GL064A Standard Products

Standard products are available in several packages and operating ranges. The

order number (Valid Combination) is formed by a combination of the following:

S29GL064A

90

T

A

I

R1

2

PACKING TYPE

0

2

3

=

Tray

7” Tape and Reel

13” Tape and Reel

MODEL NUMBER

R1

R2

R3

R4

=

x8/x16, V_CC=3.0-3.6V, Uniform sector device, highest address

sector protected when WP#/ACC=V_IL

x8/x16, V_CC=3.0-3.6V, Uniform sector device, lowest address sector

protected when WP#/ACC=V_IL

x8/x16, V_CC=3.0-3.6V, Top boot sector device, top two address

sectors protected when WP#/ACC=V_IL

x8/x16, V_CC=3.0-3.6V, Bottom boot sector device, bottom two

address sectors protected when WP#/ACC=V_IL

x16, V_CC=3.0-3.6V, Uniform sector device

R5

R6

=

x16, V_CC=3.0-3.6V, Uniform sector device, highest address sector

protected when WP#=V_IL

R7

R8

R9

=

x16, V_CC=3.0-3.6V, Uniform sector device, lowest address sector

protected when WP#=V_IL

x8/x16, V_CC=3.0-3.6V, Uniform sector device, highest address

sector protected when WP#=V_IL,TSO48 only

x8/x16, V_CC=3.0-3.6V, Uniform sector device, lowest address sector

protected when WP#=V_IL,TSO48 only

TEMPERATURE RANGE

I

= Industrial (–40°C to +85°C)

PACKAGE MATERIAL SET

A

F

=

Standard

Pb-Free

PACKAGE TYPE

T

B

F

=

Thin Small Outline Package (TSOP) Standard Pinout

Fine-pitch Ball-Grid Array Package

Fortified Ball-Grid Array Package

SPEED OPTION

See Product Selector Guide and Valid Combinations

DEVICE NUMBER/DESCRIPTION

S29GL064A

64 Megabit Page-Mode Flash Memory Manufactured using 200 nm MirrorBit^TM

Process Technology, 3.0 Volt-only Read, Program, and Erase

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

17

A d v a n c e I n f o r m a t i o n

Table 2. S29GL064A Valid Combinations

S29GL064A Valid Combinations

Package, Material

& Temperature

Range

Package Description

Device

Number

Speed

Option

Packing

Type

Model Number

R3, R4, R6, R7, R8, R9

R1, R2

TS048 (note 2)

TSOP

TAI, TFI

TS056 (note 2)

VBN048 (note 3)

LAA064 (note 3)

0, 2, 3

(Note 1)

S29GL064A

90, 10, 11

BAI, BFI

FAI, FFI

R3, R4, R5

Fine-pitch BGA

Fortified BGA

R1, R2, R3, R4, R5

Notes:

1. Type 0 is standard. Specify others as required: TSOPs can be packed in Types 0 and 3; BGAs can be packed in Types

0, 2, or 3.

2. TSOP package marking omits packing type designator from ordering part number.

3. BGA package marking omits leading “S29” and packing type designator from ordering part number.

Valid Combinations

Valid Combinations list configurations planned to be supported in volume for this device.

Consult your local sales office to confirm availability of specific valid combinations and to

check on newly released combinations.

18

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Device Bus Operations

This section describes the requirements and use of the device bus operations,

which are initiated through the internal command register. The command register

itself does not occupy any addressable memory location. The register is a latch

used to store the commands, along with the address and data information

needed to execute the command. The contents of the register serve as inputs to

the internal state machine. The state machine outputs dictate the function of the

device. Table 3 lists the device bus operations, the inputs and control levels they

require, and the resulting output. The following subsections describe each of

these operations in further detail.

Table 3. Device Bus Operations

DQ8–DQ15

BYTE# BYTE#

Addresses

(Note 1)

DQ0–

DQ7

Operation

CE# OE# WE# RESET#

WP#

ACC

= V = V

IH

IL

Read

L

H

L

H

X

A_IN

D_OUT

(Note

4)

DQ8–DQ14

= High-Z,

DQ15 = A-1

Write (Program/Erase)

Accelerated Program

Standby

H

(Note 3)

X

(Note 4)

(Note

4)

L

H

X

L

H

(Note 3) V_HH

A_IN

X

(Note 4)

High-Z

V_CC

0.3 V

±

V_CC±

0.3 V

X

H

High-Z

Output Disable

Reset

L

H

X

H

X

H

L

X

High-Z

X

SA, A6 =L,

A3=L, A2=L, (Note 4)

A1=H, A0=L

Sector Group Protect

(Note 2)

L

H

L

V_ID

H

X

Sector Group

Unprotect

(Note 2)

SA, A6=H,

A3=L, A2=L, (Note 4)

A1=H, A0=L

L

H

X

L

V_ID

H

X

Temporary Sector

Group Unprotect

(Note

4)

X

A_IN

(Note 4)

High-Z

Legend: L = Logic Low = V , H = Logic High = V , V = 11.5–12.5V, V = 11.5–12.5V, X = Don’t Care, SA = Sector

IL

IH

ID

HH

Address, A = Address In, D = Data In, D = Data Out

IN

OUT

Notes:

1. Addresses are Amax:A0 in word mode; Amax:A-1 in byte mode. Sector addresses are Amax:A15 in both modes.

2. The sector protect and sector unprotect functions may also be implemented via programming equipment. See the

“Sector Group Protection and Unprotection” section.

3. If WP# = V , the first or last sector remains protected (for uniform sector devices), and the two outer boot sectors

IL

are protected (for boot sector devices). If WP# = V , the first or last sector, or the two outer boot sectors will be

IH

protected or unprotected as determined by the method described in “Sector Group Protection and Unprotection”.

All sectors are unprotected when shipped from the factory (The Secured Silicon Sector may be factory protected

depending on version ordered.)

4. D or D

as required by command sequence, data polling, or sector protect algorithm (see Figure 7).

OUT

IN

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

19

A d v a n c e I n f o r m a t i o n

Word/Byte Configuration

The BYTE# pin controls whether the device data I/O pins operate in the byte or

word configuration. If the BYTE# pin is set at logic ‘1’, the device is in word con-

figuration, DQ0–DQ15 are active and controlled by CE# and OE#.

If the BYTE# pin is set at logic ‘0’, the device is in byte configuration, and only

data I/O pins DQ0–DQ7 are active and controlled by CE# and OE#. The data I/

O pins DQ8–DQ14 are tri-stated, and the DQ15 pin is used as an input for the

LSB (A-1) address function.

Requirements for Reading Array Data

To read array data from the outputs, the system must drive the CE# and OE#

pins to V_IL. CE# is the power control and selects the device. OE# is the output

control and gates array data to the output pins. WE# should remain at V_IH

.

The internal state machine is set for reading array data upon device power-up,

or after a hardware reset. This ensures that no spurious alteration of the memory

content occurs during the power transition. No command is necessary in this

mode to obtain array data. Standard microprocessor read cycles that assert valid

addresses on the device address inputs produce valid data on the device data

outputs. The device remains enabled for read access until the command register

contents are altered.

See “Reading Array Data” for more information. Refer to the AC Read-Only Op-

erations table for timing specifications and the timing diagram. Refer to the DC

Characteristics table for the active current specification on reading array data.

Page Mode Read

The device is capable of fast page mode read and is compatible with the page

mode Mask ROM read operation. This mode provides faster read access speed for

random locations within a page. The page size of the device is 4 words/8 bytes.

The appropriate page is selected by the higher address bits A(max)–A2. Address

bits A1–A0 in word mode (A1–A-1 in byte mode) determine the specific word

within a page. This is an asynchronous operation; the microprocessor supplies

the specific word location.

The random or initial page access is equal to t_ACCor t_CEand subsequent page

read accesses (as long as the locations specified by the microprocessor falls

within that page) is equivalent to t_PACC. When CE# is deasserted and reasserted

for a subsequent access, the access time is t_ACCor t_CE. Fast page mode accesses

are obtained by keeping the “read-page addresses” constant and changing the

“intra-read page” addresses.

Writing Commands/Command Sequences

To write a command or command sequence (which includes programming data

to the device and erasing sectors of memory), the system must drive WE# and

CE# to V_IL, and OE# to V_IH

.

The device features an Unlock Bypass mode to facilitate faster programming.

Once the device enters the Unlock Bypass mode, only two write cycles are re-

quired to program a word, instead of four. The “Word Program Command

Sequence” section has details on programming data to the device using both

standard and Unlock Bypass command sequences.

20

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

An erase operation can erase one sector, multiple sectors, or the entire device.

Table 4-Table 20 indicates the address space that each sector occupies.

Refer to the DC Characteristics table for the active current specification for the

write mode. The AC Characteristics section contains timing specification tables

and timing diagrams for write operations.

Write Buffer

Write Buffer Programming allows the system write to a maximum of 16 words/32

bytes in one programming operation. This results in faster effective programming

time than the standard programming algorithms. See “Write Buffer” for more

information.

Accelerated Program Operation

The device offers accelerated program operations through the ACC function. This

is one of two functions provided by the WP#/ACC or ACC pin, depending on model

number. This function is primarily intended to allow faster manufacturing

throughput at the factory.

If the system asserts V_HHon this pin, the device automatically enters the afore-

mentioned Unlock Bypass mode, temporarily unprotects any protected sector

groups, and uses the higher voltage on the pin to reduce the time required for

program operations. The system would use a two-cycle program command se-

quence as required by the Unlock Bypass mode. Removing V_HHfrom the WP#/

ACC or ACC pin, depending on model number, returns the device to normal op-

eration. Note that the WP#/ACC or ACC pin must not be at V_HHfor operations

other than accelerated programming, or device damage may result. WP# has an

internal pullup; when unconnected, WP# is at V_IH

.

Autoselect Functions

If the system writes the autoselect command sequence, the device enters the au-

toselect mode. The system can then read autoselect codes from the internal

register (which is separate from the memory array) on DQ7–DQ0. Standard read

cycle timings apply in this mode. Refer to the “Autoselect Mode” section on page

30 and “Autoselect Command Sequence” section on page 44 sections for more

information.

Standby Mode

When the system is not reading or writing to the device, it can place the device

in the standby mode. In this mode, current consumption is greatly reduced, and

the outputs are placed in the high impedance state, independent of the OE#

input.

The device enters the CMOS standby mode when the CE# and RESET# pins are

both held at V_IO± 0.3 V. (Note that this is a more restricted voltage range than

V_IH.) If CE# and RESET# are held at V_IH, but not within V_IO± 0.3 V, the device

will be in the standby mode, but the standby current will be greater. The device

requires standard access time (t_CE) for read access when the device is in either

of these standby modes, before it is ready to read data.

If the device is deselected during erasure or programming, the device draws ac-

tive current until the operation is completed.

Refer to the “DC Characteristics” section on page 65 for the standby current

specification.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

21

A d v a n c e I n f o r m a t i o n

Automatic Sleep Mode

The automatic sleep mode minimizes Flash device energy consumption. The de-

vice automatically enables this mode when addresses remain stable for t_ACC

+

30 ns. The automatic sleep mode is independent of the CE#, WE#, and OE# con-

trol signals. Standard address access timings provide new data when addresses

are changed. While in sleep mode, output data is latched and always available to

the system. Refer to the “DC Characteristics” section on page 65 for the

automatic sleep mode current specification.

RESET#: Hardware Reset Pin

The RESET# pin provides a hardware method of resetting the device to reading

array data. When the RESET# pin is driven low for at least a period of t_RP, the

device immediately terminates any operation in progress, tristates all output

pins, and ignores all read/write commands for the duration of the RESET# pulse.

The device also resets the internal state machine to reading array data. The op-

eration that was interrupted should be reinitiated once the device is ready to

accept another command sequence, to ensure data integrity.

Current is reduced for the duration of the RESET# pulse. When RESET# is held

at V_SS±0.3 V, the device draws CMOS standby current (I_CC5). If RESET# is held

at V_ILbut not within V_SS±0.3 V, the standby current will be greater.

The RESET# pin may be tied to the system reset circuitry. A system reset would

thus also reset the Flash memory, enabling the system to read the boot-up firm-

ware from the Flash memory.

Refer to the AC Characteristics tables for RESET# parameters and to Figure 15

for the timing diagram.

Output Disable Mode

When the OE# input is at V_IH, output from the device is disabled. The output pins

are placed in the high impedance state.

22

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Table 4. S29GL032M (Models R1, R2) Sector Addresses

Sector

Size

Sector

Size

(KB/

8-bit

Address

Range

16-bit

Address

Range

8-bit

Address

Range

16-bit

Address

Range

A20-A15

(KB/

Kwords)

SA0 0 0 0 0 0 0

SA1 0 0 0 0 0 1

SA2 0 0 0 0 1 0

SA3 0 0 0 0 1 1

SA4 0 0 0 1 0 0

SA5 0 0 0 1 0 1

SA6 0 0 0 1 1 0

SA7 0 0 0 1 1 1

SA8 0 0 1 0 0 0

SA9 0 0 1 0 0 1

SA10 0 0 1 0 1 0

SA11 0 0 1 0 1 1

SA12 0 0 1 1 0 0

SA13 0 0 1 1 0 1

SA14 0 0 1 1 1 0

SA15 0 0 1 1 1 1

SA16 0 1 0 0 0 0

SA17 0 1 0 0 0 1

SA18 0 1 0 0 1 0

SA19 0 1 0 0 1 1

SA20 0 1 0 1 0 0

SA21 0 1 0 1 0 1

SA22 0 1 0 1 1 0

SA23 0 1 0 1 1 1

SA24 0 1 1 0 0 0

SA25 0 1 1 0 0 1

SA26 0 1 1 0 1 0

SA27 0 1 1 0 1 1

SA28 0 1 1 1 0 0

SA29 0 1 1 1 0 1

SA30 0 1 1 1 1 0

SA31 0 1 1 1 1 1

64/32

000000–00FFFF

010000–01FFFF

020000–02FFFF

030000–03FFFF

040000–04FFFF

050000–05FFFF

060000–06FFFF

070000–07FFFF

080000–08FFFF

090000–09FFFF

0A0000–0AFFFF

0B0000–0BFFFF

0C0000–0CFFFF

0D0000–0DFFFF

0E0000–0EFFFF

0F0000–0FFFFF

100000–10FFFF

110000–11FFFF

120000–12FFFF

130000–13FFFF

140000–14FFFF

150000–15FFFF

160000–16FFFF

170000–17FFFF

180000–18FFFF

190000–19FFFF

1A0000–1AFFFF

1B0000–1BFFFF

1C0000–1CFFFF

1D0000–1DFFFF

1E0000–1EFFFF

1F0000–1FFFFF

000000–007FFF

008000–00FFFF

010000–017FFF

018000–01FFFF

020000–027FFF

028000–02FFFF

030000–037FFF

038000–03FFFF

040000–047FFF

048000–04FFFF

050000–057FFF

058000–05FFFF

060000–067FFF

068000–06FFFF

070000–077FFF

078000–07FFFF

080000–087FFF

088000–08FFFF

090000–097FFF

098000–09FFFF

0A0000–0A7FFF

0A8000–0AFFFF

0B0000–0B7FFF

0B8000–0BFFFF

0C0000–0C7FFF

0C8000–0CFFFF

0D0000–0D7FFF

0D8000–0DFFFF

0E0000–0E7FFF

0E8000–0EFFFF

0F0000–0F7FFF

0F8000–0FFFFF

SA32 1 0 0 0 0 0

SA33 1 0 0 0 0 1

SA34 1 0 0 0 1 0

SA35 1 0 0 0 1 1

SA36 1 0 0 1 0 0

SA37 1 0 0 1 0 1

SA38 1 0 0 1 1 0

SA39 1 0 0 1 1 1

SA40 1 0 1 0 0 0

SA41 1 0 1 0 0 1

SA42 1 0 1 0 1 0

SA43 1 0 1 0 1 1

SA44 1 0 1 1 0 0

SA45 1 0 1 1 0 1

SA46 1 0 1 1 1 0

SA47 1 0 1 1 1 1

SA48 1 1 0 0 0 0

SA49 1 1 0 0 0 1

SA50 1 1 0 0 1 0

SA51 1 1 0 0 1 1

SA52 1 1 0 1 0 0

SA53 1 1 0 1 0 1

SA54 1 1 0 1 1 0

SA55 1 1 0 1 1 1

SA56 1 1 1 0 0 0

SA57 1 1 1 0 0 1

SA58 1 1 1 0 1 0

SA59 1 1 1 0 1 1

SA60 1 1 1 1 0 0

SA61 1 1 1 1 0 1

SA62 1 1 1 1 1 0

SA63 1 1 1 1 1 1

64/32

200000–20FFFF

210000–21FFFF

220000–22FFFF

230000–23FFFF

240000–24FFFF

250000–25FFFF

260000–26FFFF

270000–27FFFF

280000–28FFFF

290000–29FFFF

2A0000–2AFFFF

2B0000–2BFFFF

2C0000–2CFFFF

2D0000–2DFFFF

2E0000–2EFFFF

2F0000–2FFFFF

300000–30FFFF

310000–31FFFF

320000–32FFFF

330000–33FFFF

340000–34FFFF

350000–35FFFF

360000–36FFFF

370000–37FFFF

380000–38FFFF

390000–39FFFF

3A0000–3AFFFF

3B0000–3BFFFF

3C0000–3CFFFF

3D0000–3DFFFF

3E0000–3EFFFF

3F0000–3FFFFF

100000–107FFF

108000–10FFFF

110000–117FFF

118000–11FFFF

120000–127FFF

128000–12FFFF

130000–137FFF

138000–13FFFF

140000–147FFF

148000–14FFFF

150000–157FFF

158000–15FFFF

160000–167FFF

168000–16FFFF

170000–177FFF

178000–17FFFF

180000–187FFF

188000–18FFFF

190000–197FFF

198000–19FFFF

1A0000–1A7FFF

1A8000–1AFFFF

1B0000–1B7FFF

1B8000–1BFFFF

1C0000–1C7FFF

1C8000–1CFFFF

1D0000–1D7FFF

1D8000–1DFFFF

1E0000–1E7FFF

1E8000–1EFFFF

1F0000–1F7FFF

1F8000–1FFFFF

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

23

A d v a n c e I n f o r m a t i o n

Table 5. S29GL032M (Models R3) Top Boot Sector Addresses

Sector

Size

Sector

Size

(KB/

8-bit

Address

Range

16-bit

Address

Range

8-bit

Address

Range

16-bit

Address

Range

A20–A12

(KB/

Kwords)

SA0 000000xxx

SA1 000001xxx

SA2 000010xxx

SA3 000011xxx

SA4 000100xxx

SA5 000101xxx

SA6 000110xxx

SA7 000111xxx

SA8 001000xxx

SA9 001001xxx

SA10 001010xxx

SA11 001011xxx

SA12 001100xxx

SA13 001101xxx

SA14 001101xxx

SA15 001111xxx

SA16 010000xxx

SA17 010001xxx

SA18 010010xxx

SA19 010011xxx

SA20 010100xxx

SA21 010101xxx

SA22 010110xxx

SA23 010111xxx

SA24 011000xxx

SA25 011001xxx

SA26 011010xxx

SA27 011011xxx

SA28 011000xxx

SA29 011101xxx

SA30 011110xxx

SA31 011111xxx

SA32 100000xxx

SA33 100001xxx

SA34 100010xxx

SA35 101011xxx

64/32

000000h–00FFFFh

010000h–01FFFFh

020000h–02FFFFh

030000h–03FFFFh

040000h–04FFFFh

050000h–05FFFFh

060000h–06FFFFh

070000h–07FFFFh

080000h–08FFFFh

090000h–09FFFFh

0A0000h–0AFFFFh

0B0000h–0BFFFFh

0C0000h–0CFFFFh

0D0000h–0DFFFFh

0E0000h–0EFFFFh

0F0000h–0FFFFFh

100000h–00FFFFh

110000h–11FFFFh

120000h–12FFFFh

130000h–13FFFFh

140000h–14FFFFh

150000h–15FFFFh

160000h–16FFFFh

170000h–17FFFFh

180000h–18FFFFh

190000h–19FFFFh

00000h–07FFFh

08000h–0FFFFh

10000h–17FFFh

18000h–1FFFFh

20000h–27FFFh

28000h–2FFFFh

30000h–37FFFh

38000h–3FFFFh

40000h–47FFFh

48000h–4FFFFh

50000h–57FFFh

58000h–5FFFFh

60000h–67FFFh

68000h–6FFFFh

70000h–77FFFh

78000h–7FFFFh

80000h–87FFFh

88000h–8FFFFh

90000h–97FFFh

98000h–9FFFFh

A0000h–A7FFFh

A8000h–AFFFFh

B0000h–B7FFFh

B8000h–BFFFFh

C0000h–C7FFFh

C8000h–CFFFFh

SA36 100100xxx

SA37 100101xxx

SA38 100110xxx

SA39 100111xxx

SA40 101000xxx

SA41 101001xxx

SA42 101010xxx

SA43 101011xxx

SA44 101100xxx

SA45 101101xxx

SA46 101110xxx

SA47 101111xxx

SA48 110000xxx

SA49 110001xxx

SA50 110010xxx

SA51 110011xxx

SA52 100100xxx

SA53 110101xxx

SA54 110110xxx

SA55 110111xxx

SA56 111000xxx

SA57 111001xxx

SA58 111010xxx

SA59 111011xxx

SA60 111100xxx

SA61 111101xxx

SA62 111110xxx

SA63 111111000

SA64 111111001

SA65 111111010

SA66 111111011

SA67 111111100

64/32

8/4

240000h–24FFFFh 120000h–127FFFh

250000h–25FFFFh 128000h–12FFFFh

260000h–26FFFFh 130000h–137FFFh

270000h–27FFFFh 138000h–13FFFFh

280000h–28FFFFh 140000h–147FFFh

290000h–29FFFFh 148000h–14FFFFh

2A0000h–2AFFFFh 150000h–157FFFh

2B0000h–2BFFFFh 158000h–15FFFFh

2C0000h–2CFFFFh 160000h–167FFFh

2D0000h–2DFFFFh 168000h–16FFFFh

2E0000h–2EFFFFh 170000h–177FFFh

2F0000h–2FFFFFh 178000h–17FFFFh

300000h–30FFFFh 180000h–187FFFh

310000h–31FFFFh 188000h–18FFFFh

320000h–32FFFFh 190000h–197FFFh

330000h–33FFFFh 198000h–19FFFFh

340000h–34FFFFh 1A0000h–1A7FFFh

350000h–35FFFFh 1A8000h–1AFFFFh

360000h–36FFFFh 1B0000h–1B7FFFh

370000h–37FFFFh 1B8000h–1BFFFFh

380000h–38FFFFh 1C0000h–1C7FFFh

390000h–39FFFFh 1C8000h–1CFFFFh

3A0000h–3AFFFFh 1D0000h–1D7FFFh

3B0000h–3BFFFFh 1D8000h–1DFFFFh

3C0000h–3CFFFFh 1E0000h–1E7FFFh

3D0000h–3DFFFFh 1E8000h–1EFFFFh

3E0000h–3EFFFFh 1F0000h–1F7FFFh

3F0000h–3F1FFFh 1F8000h–1F8FFFh

3F2000h–3F3FFFh 1F9000h–1F9FFFh

3F4000h–3F5FFFh 1FA000h–1FAFFFh

3F6000h–3F7FFFh 1FB000h–1FBFFFh

3F8000h–3F9FFFh 1FC000h–1FCFFFh

3FA000h–3FBFFFh 1FD000h–1FDFFFh

3FC000h–3FDFFFh 1FE000h–1FEFFFh

3FE000h–3FFFFFh 1FF000h–1FFFFFh

1A0000h–1AFFFFh D0000h–D7FFFh

1B0000h–1BFFFFh

1C0000h–1CFFFFh

1D0000h–1DFFFFh

1E0000h–1EFFFFh

1F0000h–1FFFFFh

200000h–20FFFFh F9000h–107FFFh SA68 111111101

210000h–21FFFFh 108000h–10FFFFh SA69 111111110

220000h–22FFFFh 110000h–117FFFh SA70 111111111

230000h–23FFFFh 118000h–11FFFFh

D8000h–DFFFFh

E0000h–E7FFFh

E8000h–EFFFFh

F0000h–F7FFFh

F8000h–FFFFFh

8/4

Table 6. S29GL032M (Models R4) Bottom Boot Sector Addresses (Sheet 1 of 2)

Sector

Size

Sector

Size

8-bit

Address

Range

16-bit

Address

Range

8-bit

Address

Range

16-bit

Address

Range

A20–A12

(KB/

Kwords)

SA0 000000000

SA1 000000001

SA2 000000010

SA3 000000011

SA4 000000100

SA5 000000101

SA6 000000110

SA7 000000111

SA8 000001xxx

SA9 000010xxx

SA10 000011xxx

SA11 000100xxx

SA12 000101xxx

SA13 000110xxx

SA14 000111xxx

SA15 001000xxx

SA16 001001xxx

SA17 001010xxx

SA18 001011xxx

8/4

64/32

000000h–001FFFh

002000h–003FFFh

004000h–005FFFh

006000h–007FFFh

008000h–009FFFh

00A000h–00BFFFh

00C000h–00DFFFh

00E000h–00FFFFFh

010000h–01FFFFh

020000h–02FFFFh

030000h–03FFFFh

040000h–04FFFFh

050000h–05FFFFh

060000h–06FFFFh

070000h–07FFFFh

080000h–08FFFFh

090000h–09FFFFh

0A0000h–0AFFFFh

0B0000h–0BFFFFh

00000h–00FFFh

01000h–01FFFh

02000h–02FFFh

03000h–03FFFh

04000h–04FFFh

05000h–05FFFh

06000h–06FFFh

07000h–07FFFh

08000h–0FFFFh

10000h–17FFFh

18000h–1FFFFh

20000h–27FFFh

28000h–2FFFFh

30000h–37FFFh

38000h–3FFFFh

40000h–47FFFh

48000h–4FFFFh

50000h–57FFFh

58000h–5FFFFh

SA19 001100xxx 64/32

SA20 001101xxx 64/32

SA21 001101xxx 64/32

SA22 001111xxx 64/32

SA23 010000xxx 64/32

SA24 010001xxx 64/32

SA25 010010xxx 64/32

SA26 010011xxx 64/32

SA27 010100xxx 64/32

SA28 010101xxx 64/32

SA29 010110xxx 64/32

SA30 010111xxx 64/32

SA31 011000xxx 64/32

SA32 011001xxx 64/32

SA33 011010xxx 64/32

SA34 011011xxx 64/32

SA35 011000xxx 64/32

SA36 011101xxx 64/32

SA37 011110xxx 64/32

0C0000h–0CFFFFh

0D0000h–0DFFFFh

0E0000h–0EFFFFh

0F0000h–0FFFFFh

100000h–00FFFFh

110000h–11FFFFh

120000h–12FFFFh

130000h–13FFFFh

140000h–14FFFFh

150000h–15FFFFh

160000h–16FFFFh

170000h–17FFFFh

180000h–18FFFFh

190000h–19FFFFh

1A0000h–1AFFFFh

1B0000h–1BFFFFh

1C0000h–1CFFFFh

1D0000h–1DFFFFh

1E0000h–1EFFFFh

60000h–67FFFh

68000h–6FFFFh

70000h–77FFFh

78000h–7FFFFh

80000h–87FFFh

88000h–8FFFFh

90000h–97FFFh

98000h–9FFFFh

A0000h–A7FFFh

A8000h–AFFFFh

B0000h–B7FFFh

B8000h–BFFFFh

C0000h–C7FFFh

C8000h–CFFFFh

D0000h–D7FFFh

D8000h–DFFFFh

E0000h–E7FFFh

E8000h–EFFFFh

F0000h–F7FFFh

24

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Table 6. S29GL032M (Models R4) Bottom Boot Sector Addresses (Sheet 2 of 2)

Sector

Size

(KB/

Sector

Size

(KB/

8-bit

Address

Range

16-bit

Address

Range

8-bit

Address

Range

16-bit

Address

Range

A20–A12

Kwords)

SA38 011111xxx

SA39 100000xxx

SA40 100001xxx

SA41 100010xxx

SA42 101011xxx

SA43 100100xxx

SA44 100101xxx

SA45 100110xxx

SA46 100111xxx

SA47 101000xxx

SA48 101001xxx

SA49 101010xxx

SA50 101011xxx

SA51 101100xxx

SA52 101101xxx

SA53 101110xxx

SA54 101111xxx

64/32

1F0000h–1FFFFFh

200000h–20FFFFh

F8000h–FFFFFh

F9000h–107FFFh SA56 110001xxx 64/32

SA55 110000xxx 64/32

300000h–30FFFFh 180000h–187FFFh

310000h–31FFFFh 188000h–18FFFFh

320000h–32FFFFh 190000h–197FFFh

330000h–33FFFFh 198000h–19FFFFh

340000h–34FFFFh 1A0000h–1A7FFFh

350000h–35FFFFh 1A8000h–1AFFFFh

360000h–36FFFFh 1B0000h–1B7FFFh

370000h–37FFFFh 1B8000h–1BFFFFh

380000h–38FFFFh 1C0000h–1C7FFFh

390000h–39FFFFh 1C8000h–1CFFFFh

3A0000h–3AFFFFh 1D0000h–1D7FFFh

3B0000h–3BFFFFh 1D8000h–1DFFFFh

3C0000h–3CFFFFh 1E0000h–1E7FFFh

3D0000h–3DFFFFh 1E8000h–1EFFFFh

3E0000h–3EFFFFh 1F0000h–1F7FFFh

3F0000h–3FFFFFh 1F8000h–1FFFFFh

210000h–21FFFFh 108000h–10FFFFh SA57 110010xxx 64/32

220000h–22FFFFh 110000h–117FFFh SA58 110011xxx 64/32

230000h–23FFFFh 118000h–11FFFFh SA59 100100xxx 64/32

240000h–24FFFFh 120000h–127FFFh SA60 110101xxx 64/32

250000h–25FFFFh 128000h–12FFFFh SA61 110110xxx 64/32

260000h–26FFFFh 130000h–137FFFh SA62 110111xxx 64/32

270000h–27FFFFh 138000h–13FFFFh SA63 111000xxx 64/32

280000h–28FFFFh 140000h–147FFFh SA64 111001xxx 64/32

290000h–29FFFFh 148000h–14FFFFh SA65 111010xxx 64/32

2A0000h–2AFFFFh 150000h–157FFFh SA66 111011xxx 64/32

2B0000h–2BFFFFh 158000h–15FFFFh SA67 111100xxx 64/32

2C0000h–2CFFFFh 160000h–167FFFh SA68 111101xxx 64/32

2D0000h–2DFFFFh 168000h–16FFFFh SA69 111110xxx 64/32

2E0000h–2EFFFFh 170000h–177FFFh SA70 111111xxx 64/32

2F0000h–2FFFFFh 178000h–17FFFFh

Table 7. S29GL064A (Models R1, R2, R8, R9) Sector Addresses (Sheet 1 of 2)

Sector

Size

Sector

Size

8-bit

Address

Range

16-bit

Address

Range

8-bit

Address

Range

16-bit

Address

Range

A21–A15

(KB/

Kwords)

SA0

SA1

SA2

SA3

SA4

SA5

SA6

SA7

SA8

SA9

0000000

0000001

0000010

0000011

0000100

0000101

0000110

0000111

0001000

0001001

64/32

000000–00FFFF

010000–01FFFF

020000–02FFFF

030000–03FFFF

040000–04FFFF

050000–05FFFF

060000–06FFFF

070000–07FFFF

080000–08FFFF

090000–09FFFF

0A0000–0AFFFF

0B0000–0BFFFF

0C0000–0CFFFF

0D0000–0DFFFF

0E0000–0EFFFF

0F0000–0FFFFF

100000–10FFFF

110000–11FFFF

120000–12FFFF

130000–13FFFF

140000–14FFFF

150000–15FFFF

160000–16FFFF

170000–17FFFF

180000–18FFFF

190000–19FFFF

1A0000–1AFFFF

1B0000–1BFFFF

1C0000–1CFFFF

1D0000–1DFFFF

1E0000–1EFFFF

1F0000–1FFFFF

200000–20FFFF

210000–21FFFF

220000–22FFFF

230000–23FFFF

240000–24FFFF

000000–007FFF

008000–00FFFF

010000–017FFF

018000–01FFFF

020000–027FFF

028000–02FFFF

030000–037FFF

038000–03FFFF

040000–047FFF

048000–04FFFF

050000–057FFF

058000–05FFFF

060000–067FFF

068000–06FFFF

070000–077FFF

078000–07FFFF

080000–087FFF

088000–08FFFF

090000–097FFF

098000–09FFFF

0A0000–0A7FFF

0A8000–0AFFFF

0B0000–0B7FFF

0B8000–0BFFFF

0C0000–0C7FFF

0C8000–0CFFFF

0D0000–0D7FFF

0D8000–0DFFFF

0E0000–0E7FFF

0E8000–0EFFFF

0F0000–0F7FFF

0F8000–0FFFFF

100000–107FFF

108000–10FFFF

110000–117FFF

118000–11FFFF

120000–127FFF

SA37

SA38

SA39

SA40

SA41

SA42

SA43

SA44

SA45

SA46

SA47

SA48

SA49

SA50

SA51

SA52

SA53

SA54

SA55

SA56

SA57

SA58

SA59

SA60

SA61

SA62

SA63

SA64

SA65

SA66

SA67

SA68

SA69

SA70

SA71

SA72

SA73

0100101

0100110

0100111

0101000

0101001

0101010

0101011

0101100

0101101

0101110

0101111

0110000

0110001

0110010

0110011

0110100

0110101

0110110

0110111

0111000

0111001

0111010

0111011

0111100

0111101

0111110

0111111

1000000

1000001

1000010

1000011

1000100

1000101

1000110

1000111

1001000

1001001

64/32

250000–25FFFF

260000–26FFFF

270000–27FFFF

280000–28FFFF

290000–29FFFF

2A0000–2AFFFF

2B0000–2BFFFF

2C0000–2CFFFF

2D0000–2DFFFF

2E0000–2EFFFF

2F0000–2FFFFF

300000–30FFFF

310000–31FFFF

320000–32FFFF

330000–33FFFF

340000–34FFFF

350000–35FFFF

360000–36FFFF

370000–37FFFF

380000–38FFFF

390000–39FFFF

3A0000–3AFFFF

3B0000–3BFFFF

3C0000–3CFFFF

3D0000–3DFFFF

3E0000–3EFFFF

3F0000–3FFFFF

400000–40FFFF

410000–41FFFF

420000–42FFFF

430000–43FFFF

440000–44FFFF

450000–45FFFF

460000–46FFFF

470000–47FFFF

480000–48FFFF

490000–49FFFF

128000–12FFFF

130000–137FFF

138000–13FFFF

140000–147FFF

148000–14FFFF

150000–157FFF

158000–15FFFF

160000–167FFF

168000–16FFFF

170000–177FFF

178000–17FFFF

180000–187FFF

188000–18FFFF

190000–197FFF

198000–19FFFF

1A0000–1A7FFF

1A8000–1AFFFF

1B0000–1B7FFF

1B8000–1BFFFF

1C0000–1C7FFF

1C8000–1CFFFF

1D0000–1D7FFF

1D8000–1DFFFF

1E0000–1E7FFF

1E8000–1EFFFF

1F0000–1F7FFF

1F8000–1FFFFF

200000–207FFF

208000–20FFFF

210000–217FFF

218000–21FFFF

220000–227FFF

228000–22FFFF

230000–237FFF

238000–23FFFF

240000–247FFF

248000–24FFFF

SA10 0001010

SA11 0001011

SA12 0001100

SA13 0001101

SA14 0001110

SA15 0001111

SA16 0010000

SA17 0010001

SA18 0010010

SA19 0010011

SA20 0010100

SA21 0010101

SA22 0010110

SA23 0010111

SA24 0011000

SA25 0011001

SA26 0011010

SA27 0011011

SA28 0011100

SA29 0011101

SA30 0011110

SA31 0011111

SA32 0100000

SA33 0100001

SA34 0100010

SA35 0100011

SA36 0100100

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

25

A d v a n c e I n f o r m a t i o n

Table 7. S29GL064A (Models R1, R2, R8, R9) Sector Addresses (Sheet 2 of 2)

Sector

Size

(KB/

Sector

Size

(KB/

8-bit

Address

Range

16-bit

Address

Range

8-bit

Address

Range

16-bit

Address

Range

A21–A15

Kwords)

SA74 1001010

SA75 1001011

SA76 1001100

SA77 1001101

SA78 1001110

SA79 1001111

SA80 1010000

SA81 1010001

SA82 1010010

SA83 1010011

SA84 1010100

SA85 1010101

SA86 1010110

SA87 1010111

SA88 1011000

SA89 1011001

SA90 1011010

SA91 1011011

SA92 1011100

SA93 1011101

SA94 1011110

SA95 1011111

SA96 1100000

SA97 1100001

SA98 1100010

SA99 1100011

SA100 1100100

64/32

4A0000–4AFFFF

4B0000–4BFFFF

4C0000–4CFFFF

4D0000–4DFFFF

4E0000–4EFFFF

4F0000–4FFFFF

500000–50FFFF

510000–51FFFF

520000–52FFFF

530000–53FFFF

540000–54FFFF

550000–55FFFF

560000–56FFFF

570000–57FFFF

580000–58FFFF

590000–59FFFF

5A0000–5AFFFF

5B0000–5BFFFF

5C0000–5CFFFF

5D0000–5DFFFF

5E0000–5EFFFF

5F0000–5FFFFF

600000–60FFFF

610000–61FFFF

620000–62FFFF

630000–63FFFF

640000–64FFFF

250000–257FFF

258000–25FFFF

260000–267FFF

268000–26FFFF

270000–277FFF

278000–27FFFF

280000–287FFF

288000–28FFFF

290000–297FFF

298000–29FFFF

2A0000–2A7FFF

2A8000–2AFFFF

2B0000–2B7FFF

2B8000–2BFFFF

2C0000–2C7FFF

2C8000–2CFFFF

2D0000–2D7FFF

2D8000–2DFFFF

2E0000–2E7FFF

2E8000–2EFFFF

2F0000–2F7FFF

2F8000–2FFFFF

300000–307FFF

308000–30FFFF

310000–317FFF

318000–31FFFF

320000–327FFF

SA101 1100101

SA102 1100110

SA103 1100111

SA104 1101000

SA105 1101001

SA106 1101010

SA107 1101011

SA108 1101100

SA109 1101101

SA110 1101110

SA111 1101111

SA112 1110000

SA113 1110001

SA114 1110010

SA115 1110011

SA116 1110100

SA117 1110101

SA118 1110110

SA119 1110111

SA120 1111000

SA121 1111001

SA122 1111010

SA123 1111011

SA124 1111100

SA125 1111101

SA126 1111110

SA127 1111111

64/32

650000–65FFFF

660000–66FFFF

670000–67FFFF

680000–68FFFF

690000–69FFFF

6A0000–6AFFFF

6B0000–6BFFFF

6C0000–6CFFFF

6D0000–6DFFFF

6E0000–6EFFFF

6F0000–6FFFFF

700000–70FFFF

710000–71FFFF

720000–72FFFF

730000–73FFFF

740000–74FFFF

750000–75FFFF

760000–76FFFF

770000–77FFFF

780000–78FFFF

790000–79FFFF

7A0000–7AFFFF

7B0000–7BFFFF

7C0000–7CFFFF

7D0000–7DFFFF

7E0000–7EFFFF

7F0000–7FFFFF

328000–32FFFF

330000–337FFF

338000–33FFFF

340000–347FFF

348000–34FFFF

350000–357FFF

358000–35FFFF

360000–367FFF

368000–36FFFF

370000–377FFF

378000–37FFFF

380000–387FFF

388000–38FFFF

390000–397FFF

398000–39FFFF

3A0000–3A7FFF

3A8000–3AFFFF

3B0000–3B7FFF

3B8000–3BFFFF

3C0000–3C7FFF

3C8000–3CFFFF

3D0000–3D7FFF

3D8000–3DFFFF

3E0000–3E7FFF

3E8000–3EFFFF

3F0000–3F7FFF

3F8000–3FFFFF

Table 8. S29GL064A (Model R3) Top Boot Sector Addresses (Sheet 1 of 2)

Sector

Size

(KB/

Sector

Size

(KB/

8-bit

Address

Range

16-bit

Address

Range

8-bit

Address

Range

16-bit

Address

Range

A21–A15

Kwords)

SA0

SA1

SA2

SA3

SA4

SA5

SA6

SA7

SA8

SA9

0000000xxx

0000001xxx

0000010xxx

0000011xxx

0000100xxx

0000101xxx

0000110xxx

0000111xxx

0001000xxx

0001001xxx

64/32

000000h–00FFFFh

010000h–01FFFFh

020000h–02FFFFh

030000h–03FFFFh

040000h–04FFFFh

050000h–05FFFFh

060000h–06FFFFh

070000h–07FFFFh

080000h–08FFFFh

090000h–09FFFFh

0A0000h–0AFFFFh

0B0000h–0BFFFFh

0C0000h–0CFFFFh

0D0000h–0DFFFFh

0E0000h–0EFFFFh

0F0000h–0FFFFFh

100000h–00FFFFh

110000h–11FFFFh

120000h–12FFFFh

130000h–13FFFFh

140000h–14FFFFh

150000h–15FFFFh

160000h–16FFFFh

170000h–17FFFFh

180000h–18FFFFh

190000h–19FFFFh

1A0000h–1AFFFFh

1B0000h–1BFFFFh

1C0000h–1CFFFFh

1D0000h–1DFFFFh

1E0000h–1EFFFFh

1F0000h–1FFFFFh

200000h–20FFFFh

00000h–07FFFh

08000h–0FFFFh

10000h–17FFFh

18000h–1FFFFh

20000h–27FFFh

28000h–2FFFFh

30000h–37FFFh

38000h–3FFFFh

40000h–47FFFh

48000h–4FFFFh

50000h–57FFFh

58000h–5FFFFh

60000h–67FFFh

68000h–6FFFFh

70000h–77FFFh

78000h–7FFFFh

80000h–87FFFh

88000h–8FFFFh

90000h–97FFFh

98000h–9FFFFh

A0000h–A7FFFh

A8000h–AFFFFh

B0000h–B7FFFh

B8000h–BFFFFh

C0000h–C7FFFh

C8000h–CFFFFh

D0000h–D7FFFh

D8000h–DFFFFh

E0000h–E7FFFh

E8000h–EFFFFh

F0000h–F7FFFh

F8000h–FFFFFh

F9000h–107FFFh

SA34 0100010xxx

SA35 0101011xxx

SA36 0100100xxx

SA37 0100101xxx

SA38 0100110xxx

SA39 0100111xxx

SA40 0101000xxx

SA41 0101001xxx

SA42 0101010xxx

SA43 0101011xxx

SA44 0101100xxx

SA45 0101101xxx

SA46 0101110xxx

SA47 0101111xxx

SA48 0110000xxx

SA49 0110001xxx

SA50 0110010xxx

SA51 0110011xxx

SA52 0100100xxx

SA53 0110101xxx

SA54 0110110xxx

SA55 0110111xxx

SA56 0111000xxx

SA57 0111001xxx

SA58 0111010xxx

SA59 0111011xxx

SA60 0111100xxx

SA61 0111101xxx

SA62 0111110xxx

SA63 0111111xxx

SA64 1000000xxx

SA65 1000001xxx

SA66 1000010xxx

SA67 1000011xxx

64/32

220000h–22FFFFh 110000h–117FFFh

230000h–23FFFFh 118000h–11FFFFh

240000h–24FFFFh 120000h–127FFFh

250000h–25FFFFh 128000h–12FFFFh

260000h–26FFFFh 130000h–137FFFh

270000h–27FFFFh 138000h–13FFFFh

280000h–28FFFFh 140000h–147FFFh

290000h–29FFFFh 148000h–14FFFFh

2A0000h–2AFFFFh 150000h–157FFFh

2B0000h–2BFFFFh 158000h–15FFFFh

2C0000h–2CFFFFh 160000h–167FFFh

2D0000h–2DFFFFh 168000h–16FFFFh

2E0000h–2EFFFFh 170000h–177FFFh

2F0000h–2FFFFFh 178000h–17FFFFh

300000h–30FFFFh 180000h–187FFFh

310000h–31FFFFh 188000h–18FFFFh

320000h–32FFFFh 190000h–197FFFh

330000h–33FFFFh 198000h–19FFFFh

340000h–34FFFFh 1A0000h–1A7FFFh

350000h–35FFFFh 1A8000h–1AFFFFh

360000h–36FFFFh 1B0000h–1B7FFFh

370000h–37FFFFh 1B8000h–1BFFFFh

380000h–38FFFFh 1C0000h–1C7FFFh

390000h–39FFFFh 1C8000h–1CFFFFh

3A0000h–3AFFFFh 1D0000h–1D7FFFh

3B0000h–3BFFFFh 1D8000h–1DFFFFh

3C0000h–3CFFFFh 1E0000h–1E7FFFh

3D0000h–3DFFFFh 1E8000h–1EFFFFh

3E0000h–3EFFFFh 1F0000h–1F7FFFh

3F0000h–3FFFFFh 1F8000h–1FFFFFh

400000h–40FFFFh 200000h–207FFFh

410000h–41FFFFh 208000h–20FFFFh

420000h–42FFFFh 210000h–217FFFh

430000h–43FFFFh 218000h–21FFFFh

SA10 0001010xxx

SA11 0001011xxx

SA12 0001100xxx

SA13 0001101xxx

SA14 0001101xxx

SA15 0001111xxx

SA16 0010000xxx

SA17 0010001xxx

SA18 0010010xxx

SA19 0010011xxx

SA20 0010100xxx

SA21 0010101xxx

SA22 0010110xxx

SA23 0010111xxx

SA24 0011000xxx

SA25 0011001xxx

SA26 0011010xxx

SA27 0011011xxx

SA28 0011000xxx

SA29 0011101xxx

SA30 0011110xxx

SA31 0011111xxx

SA32 0100000xxx

SA33 0100001xxx

210000h–21FFFFh 108000h–10FFFFh

26

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Table 8. S29GL064A (Model R3) Top Boot Sector Addresses (Sheet 2 of 2)

Sector

Size

(KB/

Sector

Size

(KB/

8-bit

Address

Range

16-bit

Address

Range

8-bit

Address

Range

16-bit

Address

Range

A21–A15

Kwords)

SA68 1000100xxx

SA69 1000101xxx

SA70 1000110xxx

SA71 1000111xxx

SA72 1001000xxx

SA73 1001001xxx

SA74 1001010xxx

SA75 1001011xxx

SA76 1001100xxx

SA77 1001101xxx

SA78 1001110xxx

SA79 1001111xxx

SA80 1010000xxx

SA81 1010001xxx

SA82 1010010xxx

SA83 1010011xxx

SA84 1010100xxx

SA85 1010101xxx

SA86 1010110xxx

SA87 1010111xxx

SA88 1011000xxx

SA89 1011001xxx

SA90 1011010xxx

SA91 1011011xxx

SA92 1011100xxx

SA93 1011101xxx

SA94 1011110xxx

SA95 1011111xxx

SA96 1100000xxx

SA97 1100001xxx

SA98 1100010xxx

SA99 1100011xxx

SA100 1100100xxx

SA101 1100101xxx

64/32

440000h–44FFFFh 220000h–227FFFh SA102 1100110xxx

450000h–45FFFFh 228000h–22FFFFh SA103 1100111xxx

460000h–46FFFFh 230000h–237FFFh SA104 1101000xxx

470000h–47FFFFh 238000h–23FFFFh SA105 1101001xxx

480000h–48FFFFh 240000h–247FFFh SA106 1101010xxx

490000h–49FFFFh 248000h–24FFFFh SA107 1101011xxx

4A0000h–4AFFFFh 250000h–257FFFh SA108 1101100xxx

4B0000h–4BFFFFh 258000h–25FFFFh SA109 1101101xxx

4C0000h–4CFFFFh 260000h–267FFFh SA110 1101110xxx

4D0000h–4DFFFFh 268000h–26FFFFh SA111 1101111xxx

4E0000h–4EFFFFh 270000h–277FFFh SA112 1110000xxx

4F0000h–4FFFFFh 278000h–27FFFFh SA113 1110001xxx

500000h–50FFFFh 280000h–28FFFFh SA114 1110010xxx

510000h–51FFFFh 288000h–28FFFFh SA115 1110011xxx

520000h–52FFFFh 290000h–297FFFh SA116 1110100xxx

530000h–53FFFFh 298000h–29FFFFh SA117 1110101xxx

540000h–54FFFFh 2A0000h–2A7FFFh SA118 1110110xxx

550000h–55FFFFh 2A8000h–2AFFFFh SA119 1110111xxx

560000h–56FFFFh 2B0000h–2B7FFFh SA120 1111000xxx

570000h–57FFFFh 2B8000h–2BFFFFh SA121 1111001xxx

580000h–58FFFFh 2C0000h–2C7FFFh SA122 1111010xxx

590000h–59FFFFh 2C8000h–2CFFFFh SA123 1111011xxx

5A0000h–5AFFFFh 2D0000h–2D7FFFh SA124 1111100xxx

5B0000h–5BFFFFh 2D8000h–2DFFFFh SA125 1111101xxx

5C0000h–5CFFFFh 2E0000h–2E7FFFh SA126 1111110xxx

5D0000h–5DFFFFh 2E8000h–2EFFFFh SA127 1111111000

5E0000h–5EFFFFh 2F0000h–2FFFFFh SA128 1111111001

5F0000h–5FFFFFh 2F8000h–2FFFFFh SA129 1111111010

600000h–60FFFFh 300000h–307FFFh SA130 1111111011

610000h–61FFFFh 308000h–30FFFFh SA131 1111111100

620000h–62FFFFh 310000h–317FFFh SA132 1111111101

630000h–63FFFFh 318000h–31FFFFh SA133 1111111110

640000h–64FFFFh 320000h–327FFFh SA134 1111111111

650000h–65FFFFh 328000h–32FFFFh

64/32

8/4

660000h–66FFFFh 330000h–337FFFh

670000h–67FFFFh 338000h–33FFFFh

680000h–68FFFFh 340000h–347FFFh

690000h–69FFFFh 348000h–34FFFFh

6A0000h–6AFFFFh 350000h–357FFFh

6B0000h–6BFFFFh 358000h–35FFFFh

6C0000h–6CFFFFh 360000h–367FFFh

6D0000h–6DFFFFh 368000h–36FFFFh

6E0000h–6EFFFFh 370000h–377FFFh

6F0000h–6FFFFFh 378000h–37FFFFh

700000h–70FFFFh 380000h–387FFFh

710000h–71FFFFh 388000h–38FFFFh

720000h–72FFFFh 390000h–397FFFh

730000h–73FFFFh 398000h–39FFFFh

740000h–74FFFFh 3A0000h–3A7FFFh

750000h–75FFFFh 3A8000h–3AFFFFh

760000h–76FFFFh 3B0000h–3B7FFFh

770000h–77FFFFh 3B8000h–3BFFFFh

780000h–78FFFFh 3C0000h–3C7FFFh

790000h–79FFFFh 3C8000h–3CFFFFh

7A0000h–7AFFFFh 3D0000h–3D7FFFh

7B0000h–7BFFFFh 3D8000h–3DFFFFh

7C0000h–7CFFFFh 3E0000h–3E7FFFh

7D0000h–7DFFFFh 3E8000h–3EFFFFh

7E0000h–7EFFFFh 3F0000h–3F7FFFh

7F0000h–7F1FFFh 3F8000h–3F8FFFh

7F2000h–7F3FFFh 3F9000h–3F9FFFh

7F4000h–7F5FFFh 3FA000h–3FAFFFh

7F6000h–7F7FFFh 3FB000h–3FBFFFh

7F8000h–7F9FFFh 3FC000h–3FCFFFh

7FA000h–7FBFFFh 3FD000h–3FDFFFh

7FC000h–7FDFFFh 3FE000h–3FEFFFh

7FE000h–7FFFFFh 3FF000h–3FFFFFh

8/4

Table 9. S29GL064A (Model R4) Bottom Boot Sector Addresses (Sheet 1 of 2)

Sector

Size

(KB/

Sector

Size

(KB/

8-bit

Address

Range

16-bit

Address

Range

8-bit

Address

Range

16-bit

Address

Range

A21–A15

Kwords)

SA0 0000000000

SA1 0000000001

SA2 0000000010

SA3 0000000011

SA4 0000000100

SA5 0000000101

SA6 0000000110

SA7 0000000111

8/4

64/32

000000h–001FFFh

002000h–003FFFh

004000h–005FFFh

006000h–007FFFh

008000h–009FFFh

00A000h–00BFFFh

00C000h–00DFFFh

00E000h–00FFFFFh

010000h–01FFFFh

020000h–02FFFFh

030000h–03FFFFh

040000h–04FFFFh

050000h–05FFFFh

060000h–06FFFFh

070000h–07FFFFh

080000h–08FFFFh

090000h–09FFFFh

0A0000h–0AFFFFh

0B0000h–0BFFFFh

0C0000h–0CFFFFh

0D0000h–0DFFFFh

0E0000h–0EFFFFh

0F0000h–0FFFFFh

100000h–00FFFFh

110000h–11FFFFh

120000h–12FFFFh

130000h–13FFFFh

00000h–00FFFh

01000h–01FFFh

02000h–02FFFh

03000h–03FFFh

04000h–04FFFh

05000h–05FFFh

06000h–06FFFh

07000h–07FFFh

08000h–0FFFFh

10000h–17FFFh

18000h–1FFFFh

20000h–27FFFh

28000h–2FFFFh

30000h–37FFFh

38000h–3FFFFh

40000h–47FFFh

48000h–4FFFFh

50000h–57FFFh

58000h–5FFFFh

60000h–67FFFh

68000h–6FFFFh

70000h–77FFFh

78000h–7FFFFh

80000h–87FFFh

88000h–8FFFFh

90000h–97FFFh

98000h–9FFFFh

SA27 0010100xxx

SA28 0010101xxx

SA29 0010110xxx

SA30 0010111xxx

SA31 0011000xxx

SA32 0011001xxx

SA33 0011010xxx

SA34 0011011xxx

SA35 0011000xxx

SA36 0011101xxx

SA37 0011110xxx

SA38 0011111xxx

SA39 0100000xxx

SA40 0100001xxx

SA41 0100010xxx

SA42 0101011xxx

SA43 0100100xxx

SA44 0100101xxx

SA45 0100110xxx

SA46 0100111xxx

SA47 0101000xxx

SA48 0101001xxx

SA49 0101010xxx

SA50 0101011xxx

SA51 0101100xxx

SA52 0101101xxx

SA53 0101110xxx

64/32

140000h–14FFFFh

150000h–15FFFFh

160000h–16FFFFh

170000h–17FFFFh

180000h–18FFFFh

190000h–19FFFFh

1A0000h–1AFFFFh

1B0000h–1BFFFFh

1C0000h–1CFFFFh

1D0000h–1DFFFFh

1E0000h–1EFFFFh

1F0000h–1FFFFFh

200000h–20FFFFh

210000h–21FFFFh 108000h–10FFFFh

220000h–22FFFFh 110000h–117FFFh

230000h–23FFFFh 118000h–11FFFFh

240000h–24FFFFh 120000h–127FFFh

250000h–25FFFFh 128000h–12FFFFh

260000h–26FFFFh 130000h–137FFFh

270000h–27FFFFh 138000h–13FFFFh

280000h–28FFFFh 140000h–147FFFh

290000h–29FFFFh 148000h–14FFFFh

2A0000h–2AFFFFh 150000h–157FFFh

2B0000h–2BFFFFh 158000h–15FFFFh

2C0000h–2CFFFFh 160000h–167FFFh

2D0000h–2DFFFFh 168000h–16FFFFh

2E0000h–2EFFFFh 170000h–177FFFh

A0000h–A7FFFh

A8000h–AFFFFh

B0000h–B7FFFh

B8000h–BFFFFh

C0000h–C7FFFh

C8000h–CFFFFh

D0000h–D7FFFh

D8000h–DFFFFh

E0000h–E7FFFh

E8000h–EFFFFh

F0000h–F7FFFh

F8000h–FFFFFh

F9000h–107FFFh

SA8

SA9

0000001xxx

0000010xxx

SA10 0000011xxx

SA11 0000100xxx

SA12 0000101xxx

SA13 0000110xxx

SA14 0000111xxx

SA15 0001000xxx

SA16 0001001xxx

SA17 0001010xxx

SA18 0001011xxx

SA19 0001100xxx

SA20 0001101xxx

SA21 0001101xxx

SA22 0001111xxx

SA23 0010000xxx

SA24 0010001xxx

SA25 0010010xxx

SA26 0010011xxx

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

27

A d v a n c e I n f o r m a t i o n

Table 9. S29GL064A (Model R4) Bottom Boot Sector Addresses (Sheet 2 of 2)

Sector

Size

(KB/

Sector

Size

(KB/

8-bit

Address

Range

16-bit

Address

Range

8-bit

Address

Range

16-bit

Address

Range

A21–A15

Kwords)

SA54 0101111xxx

SA55 0110000xxx

SA56 0110001xxx

SA57 0110010xxx

SA58 0110011xxx

SA59 0100100xxx

SA60 0110101xxx

SA61 0110110xxx

SA62 0110111xxx

SA63 0111000xxx

SA64 0111001xxx

SA65 0111010xxx

SA66 0111011xxx

SA67 0111100xxx

SA68 0111101xxx

SA69 0111110xxx

SA70 0111111xxx

SA71 1000000xxx

SA72 1000001xxx

SA73 1000010xxx

SA74 1000011xxx

SA75 1000100xxx

SA76 1000101xxx

SA77 1000110xxx

SA78 1000111xxx

SA79 1001000xxx

SA80 1001001xxx

SA81 1001010xxx

SA82 1001011xxx

SA83 1001100xxx

SA84 1001101xxx

SA85 1001110xxx

SA86 1001111xxx

SA87 1010000xxx

SA88 1010001xxx

SA89 1010010xxx

SA90 1010011xxx

SA91 1010100xxx

SA92 1010101xxx

SA93 1010110xxx

SA94 1010111xxx

64/32

2F0000h–2FFFFFh 178000h–17FFFFh

300000h–30FFFFh 180000h–187FFFh

310000h–31FFFFh 188000h–18FFFFh

320000h–32FFFFh 190000h–197FFFh

330000h–33FFFFh 198000h–19FFFFh

SA95 1011000xxx

SA96 1011001xxx

SA97 1011010xxx

SA98 1011011xxx

SA99 1011100xxx

64/32

580000h–58FFFFh 2C0000h–2C7FFFh

590000h–59FFFFh 2C8000h–2CFFFFh

5A0000h–5AFFFFh 2D0000h–2D7FFFh

5B0000h–5BFFFFh 2D8000h–2DFFFFh

5C0000h–5CFFFFh 2E0000h–2E7FFFh

5D0000h–5DFFFFh 2E8000h–2EFFFFh

5E0000h–5EFFFFh 2F0000h–2FFFFFh

5F0000h–5FFFFFh 2F8000h–2FFFFFh

600000h–60FFFFh 300000h–307FFFh

610000h–61FFFFh 308000h–30FFFFh

620000h–62FFFFh 310000h–317FFFh

630000h–63FFFFh 318000h–31FFFFh

640000h–64FFFFh 320000h–327FFFh

650000h–65FFFFh 328000h–32FFFFh

660000h–66FFFFh 330000h–337FFFh

670000h–67FFFFh 338000h–33FFFFh

680000h–68FFFFh 340000h–347FFFh

690000h–69FFFFh 348000h–34FFFFh

6A0000h–6AFFFFh 350000h–357FFFh

6B0000h–6BFFFFh 358000h–35FFFFh

6C0000h–6CFFFFh 360000h–367FFFh

6D0000h–6DFFFFh 368000h–36FFFFh

6E0000h–6EFFFFh 370000h–377FFFh

6F0000h–6FFFFFh 378000h–37FFFFh

700000h–70FFFFh 380000h–387FFFh

710000h–71FFFFh 388000h–38FFFFh

720000h–72FFFFh 390000h–397FFFh

730000h–73FFFFh 398000h–39FFFFh

740000h–74FFFFh 3A0000h–3A7FFFh

750000h–75FFFFh 3A8000h–3AFFFFh

760000h–76FFFFh 3B0000h–3B7FFFh

770000h–77FFFFh 3B8000h–3BFFFFh

780000h–78FFFFh 3C0000h–3C7FFFh

790000h–79FFFFh 3C8000h–3CFFFFh

7A0000h–7AFFFFh 3D0000h–3D7FFFh

7B0000h–7BFFFFh 3D8000h–3DFFFFh

7C0000h–7CFFFFh 3E0000h–3E7FFFh

7D0000h–7DFFFFh 3E8000h–3EFFFFh

7E0000h–7EFFFFh 3F0000h–3F7FFFh

7F0000h–7FFFFFh 3F8000h–3FFFFFh

340000h–34FFFFh 1A0000h–1A7FFFh SA100 1011101xxx

350000h–35FFFFh 1A8000h–1AFFFFh SA101 1011110xxx

360000h–36FFFFh 1B0000h–1B7FFFh SA102 1011111xxx

370000h–37FFFFh 1B8000h–1BFFFFh SA103 1100000xxx

380000h–38FFFFh 1C0000h–1C7FFFh SA104 1100001xxx

390000h–39FFFFh 1C8000h–1CFFFFh SA105 1100010xxx

3A0000h–3AFFFFh 1D0000h–1D7FFFh SA106 1100011xxx

3B0000h–3BFFFFh 1D8000h–1DFFFFh SA107 1100100xxx

3C0000h–3CFFFFh 1E0000h–1E7FFFh SA108 1100101xxx

3D0000h–3DFFFFh 1E8000h–1EFFFFh SA109 1100110xxx

3E0000h–3EFFFFh 1F0000h–1F7FFFh SA110 1100111xxx

3F0000h–3FFFFFh 1F8000h–1FFFFFh SA111 1101000xxx

400000h–40FFFFh 200000h–207FFFh SA112 1101001xxx

410000h–41FFFFh 208000h–20FFFFh SA113 1101010xxx

420000h–42FFFFh 210000h–217FFFh SA114 1101011xxx

430000h–43FFFFh 218000h–21FFFFh SA115 1101100xxx

440000h–44FFFFh 220000h–227FFFh SA116 1101101xxx

450000h–45FFFFh 228000h–22FFFFh SA117 1101110xxx

460000h–46FFFFh 230000h–237FFFh SA118 1101111xxx

470000h–47FFFFh 238000h–23FFFFh SA119 1110000xxx

480000h–48FFFFh 240000h–247FFFh SA120 1110001xxx

490000h–49FFFFh 248000h–24FFFFh SA121 1110010xxx

4A0000h–4AFFFFh 250000h–257FFFh SA122 1110011xxx

4B0000h–4BFFFFh 258000h–25FFFFh SA123 1110100xxx

4C0000h–4CFFFFh 260000h–267FFFh SA124 1110101xxx

4D0000h–4DFFFFh 268000h–26FFFFh SA125 1110110xxx

4E0000h–4EFFFFh 270000h–277FFFh SA126 1110111xxx

4F0000h–4FFFFFh 278000h–27FFFFh SA127 1111000xxx

500000h–50FFFFh 280000h–28FFFFh SA128 1111001xxx

510000h–51FFFFh 288000h–28FFFFh SA129 1111010xxx

520000h–52FFFFh 290000h–297FFFh SA130 1111011xxx

530000h–53FFFFh 298000h–29FFFFh SA131 1111100xxx

540000h–54FFFFh 2A0000h–2A7FFFh SA132 1111101xxx

550000h–55FFFFh 2A8000h–2AFFFFh SA133 1111110xxx

560000h–56FFFFh 2B0000h–2B7FFFh SA134 1111111000

570000h–57FFFFh 2B8000h–2BFFFFh

Table 10. S29GL064A (Model R5) Sector Addresses (Sheet 1 of 2)

16-bit

Address

Range

16-bit

Address

Range

A21–A15

SA0

SA1

SA2

SA3

SA4

SA5

SA6

SA7

SA8

0000000

0000001

0000010

0000011

0000100

0000101

0000110

0000111

0001000

0001001

0001010

0001011

0001100

0001101

0001110

0001111

0010000

0010001

0010010

0010011

0010100

000000–007FFF

008000–00FFFF

010000–017FFF

018000–01FFFF

020000–027FFF

028000–02FFFF

030000–037FFF

038000–03FFFF

040000–047FFF

048000–04FFFF

050000–057FFF

058000–05FFFF

060000–067FFF

068000–06FFFF

070000–077FFF

078000–07FFFF

080000–087FFF

088000–08FFFF

090000–097FFF

098000–09FFFF

0A0000–0A7FFF

SA21

SA22

SA23

SA24

SA25

SA26

SA27

SA28

SA29

SA30

SA31

SA32

SA33

SA34

SA35

SA36

SA37

SA38

SA39

SA40

SA41

0010101

0010110

0010111

0011000

0011001

0011010

0011011

0011100

0011101

0011110

0011111

0100000

0100001

0100010

0100011

0100100

0100101

0100110

0100111

0101000

0101001

0A8000–0AFFFF

0B0000–0B7FFF

0B8000–0BFFFF

0C0000–0C7FFF

0C8000–0CFFFF

0D0000–0D7FFF

0D8000–0DFFFF

0E0000–0E7FFF

0E8000–0EFFFF

0F0000–0F7FFF

0F8000–0FFFFF

200000–207FFF

208000–20FFFF

210000–217FFF

218000–21FFFF

220000–227FFF

228000–22FFFF

230000–237FFF

238000–23FFFF

240000–247FFF

248000–24FFFF

SA9

SA10

SA11

SA12

SA13

SA14

SA15

SA16

SA17

SA18

SA19

SA20

28

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Table 10. S29GL064A (Model R5) Sector Addresses (Sheet 2 of 2)

16-bit

Address

Range

16-bit

Address

Range

A21–A15

SA42

SA43

SA44

SA45

SA46

SA47

SA48

SA49

SA50

SA51

SA52

SA53

SA54

SA55

SA56

SA57

SA58

SA59

SA60

SA61

SA62

SA63

SA64

SA65

SA66

SA67

SA68

SA69

SA70

SA71

SA72

SA73

SA74

SA75

SA76

SA77

SA78

SA79

SA80

SA81

SA82

SA83

SA84

0101010

0101011

0101100

0101101

0101110

0101111

0110000

0110001

0110010

0110011

0110100

0110101

0110110

0110111

0111000

0111001

0111010

0111011

0111100

0111101

0111110

0111111

1000000

1000001

1000010

1000011

1000100

1000101

1000110

1000111

1001000

1001001

1001010

1001011

1001100

1001101

1001110

1001111

1010000

1010001

1010010

1010011

1010100

250000–257FFF

258000–25FFFF

260000–267FFF

268000–26FFFF

270000–277FFF

278000–27FFFF

280000–287FFF

288000–28FFFF

290000–297FFF

298000–29FFFF

2A0000–2A7FFF

2A8000–2AFFFF

2B0000–2B7FFF

2B8000–2BFFFF

2C0000–2C7FFF

2C8000–2CFFFF

2D0000–2D7FFF

2D8000–2DFFFF

2E0000–2E7FFF

2E8000–2EFFFF

2F0000–2F7FFF

2F8000–2FFFFF

100000–107FFF

108000–10FFFF

110000–117FFF

118000–11FFFF

120000–127FFF

128000–12FFFF

130000–137FFF

138000–13FFFF

140000–147FFF

148000–14FFFF

150000–157FFF

158000–15FFFF

160000–167FFF

168000–16FFFF

170000–177FFF

178000–17FFFF

180000–187FFF

188000–18FFFF

190000–197FFF

198000–19FFFF

1A0000–1A7FFF

SA85

SA86

SA87

SA88

SA89

SA90

SA91

SA92

SA93

SA94

SA95

SA96

SA97

SA98

SA99

SA100

SA101

SA102

SA103

SA104

SA105

SA106

SA107

SA108

SA109

SA110

SA111

SA112

SA113

SA114

SA115

SA116

SA117

SA118

SA119

SA120

SA121

SA122

SA123

SA124

SA125

SA126

SA127

1010101

1010110

1010111

1011000

1011001

1011010

1011011

1011100

1011101

1011110

1011111

1100000

1100001

1100010

1100011

1100100

1100101

1100110

1100111

1101000

1101001

1101010

1101011

1101100

1101101

1101110

1101111

1110000

1110001

1110010

1110011

1110100

1110101

1110110

1110111

1111000

1111001

1111010

1111011

1111100

1111101

1111110

1111111

1A8000–1AFFFF

1B0000–1B7FFF

1B8000–1BFFFF

1C0000–1C7FFF

1C8000–1CFFFF

1D0000–1D7FFF

1D8000–1DFFFF

1E0000–1E7FFF

1E8000–1EFFFF

1F0000–1F7FFF

1F8000–1FFFFF

300000–307FFF

308000–30FFFF

310000–317FFF

318000–31FFFF

320000–327FFF

328000–32FFFF

330000–337FFF

338000–33FFFF

340000–347FFF

348000–34FFFF

350000–357FFF

358000–35FFFF

360000–367FFF

368000–36FFFF

370000–377FFF

378000–37FFFF

380000–387FFF

388000–38FFFF

390000–397FFF

398000–39FFFF

3A0000–3A7FFF

3A8000–3AFFFF

3B0000–3B7FFF

3B8000–3BFFFF

3C0000–3C7FFF

3C8000–3CFFFF

3D0000–3D7FFF

3D8000–3DFFFF

3E0000–3E7FFF

3E8000–3EFFFF

3F0000–3F7FFF

3F8000–3FFFFF

Table 11. S29GL064A (Models R6, R7) Sector Addresses (Sheet 1 of 2)

16-bit

Address

Range

16-bit

Address

Range

A21–A15

SA0

SA1

SA2

SA3

SA4

SA5

SA6

SA7

SA8

0000000

0000001

0000010

0000011

0000100

0000101

0000110

0000111

0001000

0001001

0001010

0001011

0001100

0001101

0001110

0001111

0010000

0010001

0010010

0010011

0010100

000000–007FFF

008000–00FFFF

010000–017FFF

018000–01FFFF

020000–027FFF

028000–02FFFF

030000–037FFF

038000–03FFFF

040000–047FFF

048000–04FFFF

050000–057FFF

058000–05FFFF

060000–067FFF

068000–06FFFF

070000–077FFF

078000–07FFFF

080000–087FFF

088000–08FFFF

090000–097FFF

098000–09FFFF

0A0000–0A7FFF

SA21

SA22

SA23

SA24

SA25

SA26

SA27

SA28

SA29

SA30

SA31

SA32

SA33

SA34

SA35

SA36

SA37

SA38

SA39

SA40

SA41

0010101

0010110

0010111

0011000

0011001

0011010

0011011

0011100

0011101

0011110

0011111

0100000

0100001

0100010

0100011

0100100

0100101

0100110

0100111

0101000

0101001

0A8000–0AFFFF

0B0000–0B7FFF

0B8000–0BFFFF

0C0000–0C7FFF

0C8000–0CFFFF

0D0000–0D7FFF

0D8000–0DFFFF

0E0000–0E7FFF

0E8000–0EFFFF

0F0000–0F7FFF

0F8000–0FFFFF

200000–207FFF

208000–20FFFF

210000–217FFF

218000–21FFFF

220000–227FFF

228000–22FFFF

230000–237FFF

238000–23FFFF

240000–247FFF

248000–24FFFF

SA9

SA10

SA11

SA12

SA13

SA14

SA15

SA16

SA17

SA18

SA19

SA20

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

29

A d v a n c e I n f o r m a t i o n

Table 11. S29GL064A (Models R6, R7) Sector Addresses (Sheet 2 of 2)

16-bit

Address

Range

16-bit

Address

Range

A21–A15

SA42

SA43

SA44

SA45

SA46

SA47

SA48

SA49

SA50

SA51

SA52

SA53

SA54

SA55

SA56

SA57

SA58

SA59

SA60

SA61

SA62

SA63

SA64

SA65

SA66

SA67

SA68

SA69

SA70

SA71

SA72

SA73

SA74

SA75

SA76

SA77

SA78

SA79

SA80

SA81

SA82

SA83

SA84

0101010

0101011

0101100

0101101

0101110

0101111

0110000

0110001

0110010

0110011

0110100

0110101

0110110

0110111

0111000

0111001

0111010

0111011

0111100

0111101

0111110

0111111

1000000

1000001

1000010

1000011

1000100

1000101

1000110

1000111

1001000

1001001

1001010

1001011

1001100

1001101

1001110

1001111

1010000

1010001

1010010

1010011

1010100

250000–257FFF

258000–25FFFF

260000–267FFF

268000–26FFFF

270000–277FFF

278000–27FFFF

280000–287FFF

288000–28FFFF

290000–297FFF

298000–29FFFF

2A0000–2A7FFF

2A8000–2AFFFF

2B0000–2B7FFF

2B8000–2BFFFF

2C0000–2C7FFF

2C8000–2CFFFF

2D0000–2D7FFF

2D8000–2DFFFF

2E0000–2E7FFF

2E8000–2EFFFF

2F0000–2F7FFF

2F8000–2FFFFF

100000–107FFF

108000–10FFFF

110000–117FFF

118000–11FFFF

120000–127FFF

128000–12FFFF

130000–137FFF

138000–13FFFF

140000–147FFF

148000–14FFFF

150000–157FFF

158000–15FFFF

160000–167FFF

168000–16FFFF

170000–177FFF

178000–17FFFF

180000–187FFF

188000–18FFFF

190000–197FFF

198000–19FFFF

1A0000–1A7FFF

SA85

SA86

SA87

SA88

SA89

SA90

SA91

SA92

SA93

SA94

SA95

SA96

SA97

SA98

SA99

SA100

SA101

SA102

SA103

SA104

SA105

SA106

SA107

SA108

SA109

SA110

SA111

SA112

SA113

SA114

SA115

SA116

SA117

SA118

SA119

SA120

SA121

SA122

SA123

SA124

SA125

SA126

SA127

1010101

1010110

1010111

1011000

1011001

1011010

1011011

1011100

1011101

1011110

1011111

1100000

1100001

1100010

1100011

1100100

1100101

1100110

1100111

1101000

1101001

1101010

1101011

1101100

1101101

1101110

1101111

1110000

1110001

1110010

1110011

1110100

1110101

1110110

1110111

1111000

1111001

1111010

1111011

1111100

1111101

1111110

1111111

1A8000–1AFFFF

1B0000–1B7FFF

1B8000–1BFFFF

1C0000–1C7FFF

1C8000–1CFFFF

1D0000–1D7FFF

1D8000–1DFFFF

1E0000–1E7FFF

1E8000–1EFFFF

1F0000–1F7FFF

1F8000–1FFFFF

300000–307FFF

308000–30FFFF

310000–317FFF

318000–31FFFF

320000–327FFF

328000–32FFFF

330000–337FFF

338000–33FFFF

340000–347FFF

348000–34FFFF

350000–357FFF

358000–35FFFF

360000–367FFF

368000–36FFFF

370000–377FFF

378000–37FFFF

380000–387FFF

388000–38FFFF

390000–397FFF

398000–39FFFF

3A0000–3A7FFF

3A8000–3AFFFF

3B0000–3B7FFF

3B8000–3BFFFF

3C0000–3C7FFF

3C8000–3CFFFF

3D0000–3D7FFF

3D8000–3DFFFF

3E0000–3E7FFF

3E8000–3EFFFF

3F0000–3F7FFF

3F8000–3FFFFF

Autoselect Mode

The autoselect mode provides manufacturer and device identification, and sector

group protection verification, through identifier codes output on DQ7–DQ0. This

mode is primarily intended for programming equipment to automatically match a

device to be programmed with its corresponding programming algorithm. How-

ever, the autoselect codes can also be accessed in-system through the command

register.

When using programming equipment, the autoselect mode requires V_IDon ad-

dress pin A9. Address pins A6, A3, A2, A1, and A0 must be as shown in Table 12.

In addition, when verifying sector protection, the sector address must appear on

the appropriate highest order address bits (see Table 4-Table 20). Table 12 shows

the remaining address bits that are don’t care. When all necessary bits have been

set as required, the programming equipment may then read the corresponding

identifier code on DQ7–DQ0.

To access the autoselect codes in-system, the host system can issue the autose-

lect command via the command register, as shown in Table 25 and Table 26. This

30

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

method does not require V_ID. Refer to the Autoselect Command Sequence section

for more information.

Table 12. Autoselect Codes, (High Voltage Method)

DQ7 to DQ0

DQ8 to DQ15

BYTE# = BYTE# =

Model Number

A22 A14

to to

A8

to

A5 A3

to to

Description

Manufacturer

ID: Spansion

Products

CE# OE# WE# A15 A10 A9 A7 A6 A4 A2 A1 A0

V

R1, R2, R8, R9

R3, R4

R5, R6, R7

IH

IL

L

H

X

V

X

L

X

L

00

X

01h

ID

Cycle 1

Cycle 2

L

H

L

H

L

22

X

7Eh

0Ch

7Eh

10h

7Eh

13h

00h (-R4,

bottom boot)

01h (-R3, top

boot)

L

H

X

V

X

L

X

ID

Cycle 3

H

22

X

01h

Cycle 1

Cycle 2

L

H

L

H

L

22

X

7Eh

1Dh

7Eh

1Ah

00h (-R4,

bottom boot)

01h (-R3,

top boot)

L

H

X

V

X

L

X

ID

Cycle 3

H

L

H

L

22

X

00h

Sector Group

Protection

Verification

01h (protected),

00h (unprotected)

L

H

SA

X

V

X

L

X

ID

Secured Silicon

Sector Indicator

Bit (DQ7), WP#

protects highest

address sector

Secured Silicon

Sector Indicator

Bit (DQ7), WP#

protects lowest

address sector

98h (factory locked),

18h (not factory locked)

L

H

X

88h (factory locked),

08h (not factory locked)

L

H

X

V

X

L

X

ID

Legend: L = Logic Low = V_IL, H = Logic High = V_IH, SA = Sector Address, X = Don’t care.

Sector Group Protection and Unprotection

The hardware sector group protection feature disables both program and erase

operations in any sector group (see Table 11-Table 20). The hardware sector

group unprotection feature re-enables both program and erase operations in pre-

viously protected sector groups. Sector group protection/unprotection can be

implemented via two methods.

Sector protection/unprotection requires V_IDon the RESET# pin only, and can be

implemented either in-system or via programming equipment. Figure 2 shows

the algorithms and Figure 24 shows the timing diagram. This method uses stan-

dard microprocessor bus cycle timing. For sector group unprotect, all unprotected

sector groups must first be protected prior to the first sector group unprotect

write cycle.

The device is shipped with all sector groups unprotected. Spansion offers the op-

tion of programming and protecting sector groups at its factory prior to shipping

the device through Spansion Programming Service. Contact a Spansion represen-

tative for details.

It is possible to determine whether a sector group is protected or unprotected.

See the Autoselect Mode section for details.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

31

A d v a n c e I n f o r m a t i o n

Table 13. S29GL032A (Models R1, R2) Sector Group Protection/Unprotection Addresses

Sector Group

SA0

A20–A15

000000

000001

000010

000011

0001xx

0010xx

Sector Group

SA12–SA15

SA16–SA19

SA20–SA23

SA24–SA27

SA28–SA31

SA32–SA35

A20–A15

0011xx

0100xx

0101xx

0110xx

0111xx

1000xx

Sector Group

SA36–SA39

SA40–SA43

SA44–SA47

SA48–SA51

SA52–SA55

A20–A15

1001xx

1010xx

1011xx

1100xx

1101xx

Sector Group

SA56–SA59

SA60

A20–A15

1110xx

111100

111101

111110

111111

SA1

SA2

SA3

SA61

SA62

SA63

SA4–SA7

SA8–SA11

Table 14. S29GL032A (Models R3) Sector Group Protection/Unprotection Address Table

Sector/Sector

Block Size

(Kbytes)

Sector/Sector

Block Size

(Kbytes)

Sector/Sector

Block Size

(Kbytes)

Sector

A20–A12

Sector

A20–A12

Sector

A20–A12

SA0-SA3

SA4-SA7

SA8-SA11

SA12-SA15 0011XXXXXh

SA16-SA19 0100XXXXXh

SA20-SA23 0101XXXXXh

SA24-SA27 0110XXXXXh

SA28-SA31 0111XXXXXh

SA32–SA35 1000XXXXXh

0000XXXXXh

0001XXXXXh

0010XXXXXh

256 (4x64)

SA36–SA39 1001XXXXXh

SA40–SA43 1010XXXXXh

SA44–SA47 1011XXXXXh

SA48–SA51 1100XXXXXh

SA52-SA55 1101XXXXXh

SA56-SA59 1110XXXXXh

111100XXXh

256 (4x64)

SA63

SA64

SA65

SA66

SA67

SA68

SA69

SA70

111111000h

111111001h

111111010h

111111011h

111111100h

111111101h

111111110h

111111111h

8

SA60-SA62 111101XXXh

111110XXXh

192 (3x64)

Table 15. S29GL032A (Models R4) Sector Group Protection/Unprotection Address Table

Sector/Sector

Block Size

(Kbytes)

Sector/Sector

Block Size

(Kbytes)

Sector/Sector

Block Size

(Kbytes)

Sector

A20–A12

Sector

A20–A12

Sector

A20–A12

SA0

SA1

SA2

SA3

SA4

SA5

SA6

SA7

000000000h

000000001h

000000010h

000000011h

000000100h

000000101h

000000110h

000000111h

8

000001XXXh

000010XXXh

000011XXXh

SA35-SA38 0111XXXXXh

SA39-SA42 1000XXXXXh

SA43-SA46 1001XXXXXh

SA47-SA50 1010XXXXXh

SA51-SA54 1011XXXXXh

SA55–SA58 1100XXXXXh

SA59–SA62 1101XXXXXh

SA63–SA66 1110XXXXXh

SA67–SA70 1111XXXXXh

256 (4x64)

SA8–SA10

192 (3x64)

SA11–SA14 0001XXXXXh

SA15–SA18 0010XXXXXh

SA19–SA22 0011XXXXXh

SA23–SA26 0100XXXXXh

SA27-SA30 0101XXXXXh

SA31-SA34 0110XXXXXh

256 (4x64)

Table 16. S29GL064A (Models R1, R2, R8, R9) Sector Group Protection/Unprotection Addresses

Sector Group

A21–A15

0000000

0000001

0000010

0000011

00001xx

00010xx

00011xx

00100xx

00101xx

00110xx

Sector Group

SA28–SA31

SA32–SA35

SA36–SA39

SA40–SA43

SA44–SA47

SA48–SA51

SA52–SA55

SA56–SA59

SA60–SA63

SA64–SA67

A21–A15

00111xx

01000xx

01001xx

01010xx

01011xx

01100xx

01101xx

01110xx

01111xx

10000xx

Sector Group

SA68–SA71

SA72–SA75

SA76–SA79

SA80–SA83

SA84–SA87

SA88–SA91

SA92–SA95

SA96–SA99

SA100–SA103

SA104–SA107

A21–A15

10001xx

10010xx

10011xx

10100xx

10101xx

10110xx

10111xx

11000xx

11001xx

11010xx

Sector Group

SA108–SA111

SA112–SA115

SA116–SA119

SA120–SA123

SA124

A21–A15

11011xx

11100xx

11101xx

11110xx

1111100

1111101

1111110

1111111

SA0

SA1

SA2

SA3

SA4–SA7

SA8–SA11

SA12–SA15

SA16–SA19

SA20–SA23

SA24–SA27

SA125

SA126

SA127

32

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Table 17. S29GL064A (Model R3) Top Boot Sector Protection/Unprotection Addresses

Sector/Sector

Block Size

(Kbytes)

Sector/Sector

Block Size

(Kbytes)

Sector/Sector

Block Size

(Kbytes)

Sector

A21–A12

Sector

A20–A12

Sector

A20–A12

SA0-SA3

SA4-SA7

SA8-SA11 00010XXXXX

00000XXXXX

00001XXXXX

256 (4x64)

SA56-SA59

SA60-SA63

SA64-SA67

01110XXXXX

01111XXXXX

10000XXXXX

256 (4x64)

SA112-SA115 11100XXXXX

SA116-SA119 11101XXXXX

SA120-SA123 11110XXXXX

1111100XXX

256 (4x64)

SA12-SA15 00011XXXXX

256 (4x64)

SA68-SA71

10001XXXXX

256 (4x64)

SA124-SA126 1111101XXX

1111110XXX

192 (3x64)

SA16-SA19 00100XXXXX

SA20-SA23 00101XXXXX

SA24-SA27 00110XXXXX

SA28-SA31 00111XXXXX

SA32-SA35 01000XXXXX

SA36-SA39 01001XXXXX

SA40-SA43 01010XXXXX

SA44-SA47 01011XXXXX

SA48-SA51 01100XXXXX

SA52-SA55 01101XXXXX

256 (4x64)

SA72-SA75

SA76-SA79

SA80-SA83

SA84-SA87

SA88-SA91

SA92-SA95

SA96-SA99

SA100-SA103 11001XXXXX

SA104-SA107 11010XXXXX

SA108-SA111 11011XXXXX

10010XXXXX

10011XXXXX

10100XXXXX

10101XXXXX

10110XXXXX

10111XXXXX

11000XXXXX

256 (4x64)

SA127

SA128

SA129

SA130

SA131

SA132

SA133

SA134

1111111000

1111111001

1111111010

1111111011

1111111100

1111111101

1111111110

1111111111

8

Table 18. S29GL064A (Model R4) Bottom Boot Sector Protection/Unprotection Addresses

Sector/Sector

Block Size

(Kbytes)

Sector/Sector

Block Size

(Kbytes)

Sector/Sector

Block Size

(Kbytes)

Sector

A21–A12

Sector

A20–A12

Sector

A20–A12

SA0

SA1

SA2

SA3

SA4

SA5

SA6

SA7

0000000000

0000000001

0000000010

0000000011

0000000100

0000000101

0000000110

0000000111

0000001XXX,

8

SA31-SA34

SA35-SA38

SA39-SA42

SA43-SA46

SA47-SA50

SA51-SA54

SA55–SA58

SA59–SA62

00110XXXXX

00111XXXXX

01000XXXXX

01001XXXXX

01010XXXXX

01011XXXXX

01100XXXXX

01101XXXXX

256 (4x64)

SA87–SA90

SA91–SA94

SA95–SA98

SA99–SA102 10111XXXXX

SA103–SA106 11000XXXXX

SA107–SA110 11001XXXXX

SA111–SA114 11010XXXXX

SA115–SA118 11011XXXXX

10100XXXXX

10101XXXXX

10110XXXXX

256 (4x64)

SA8–SA10 0000010XXX,

192 (3x64)

SA63–SA66

01110XXXXX

256 (4x64)

SA119–SA122 11100XXXXX

256 (4x64)

0000011XXX,

SA11–SA14 00001XXXXX

SA15–SA18 00010XXXXX

SA19–SA22 00011XXXXX

SA23–SA26 00100XXXXX

SA27-SA30 00101XXXXX

256 (4x64)

SA67–SA70

SA71–SA74

SA75–SA78

SA79–SA82

SA83–SA86

01111XXXXX

10000XXXXX

10001XXXXX

10010XXXXX

10011XXXXX

256 (4x64)

SA123–SA126 11101XXXXX

SA127–SA130 11110XXXXX

SA131–SA134 11111XXXXX

256 (4x64)

Table 19. S29GL064A (Model R5) Sector Group Protection/Unprotection Addresses

Sector Group

SA0–SA3

SA4–SA7

SA8–SA11

SA12–SA15

SA16–SA19

SA20–SA23

SA24–SA27

SA28–SA31

A21–A15

00000

00001

00010

00011

00100

00101

00110

00111

Sector Group

SA32–SA35

SA36–SA39

SA40–SA43

SA44–SA47

SA48–SA51

SA52–SA55

SA56–SA59

SA60–SA63

A21–A15

01000

01001

01010

01011

01100

01101

01110

01111

Sector Group

SA64–SA67

SA68–SA71

SA72–SA75

SA76–SA79

SA80–SA83

SA84–SA87

SA88–SA91

SA92–SA95

A21–A15

10000

10001

10010

10011

10100

10101

10110

10111

Sector Group

SA96–SA99

A21–A15

11000

11001

11010

11011

11100

11101

11110

11111

SA100–SA103

SA104–SA107

SA108–SA111

SA112–SA115

SA116–SA119

SA120–SA123

SA124–SA127

Note: All sector groups are 128 Kwords in size.

Table 20. S29GL064A (Models R6, R7) Sector Group Protection/Unprotection Addresses

Sector Group

SA0–SA3

SA4–SA7

SA8–SA11

SA12–SA15

SA16–SA19

SA20–SA23

SA24–SA27

SA28–SA31

A21–A15

00000

00001

00010

00011

00100

00101

00110

00111

Sector Group

SA32–SA35

SA36–SA39

SA40–SA43

SA44–SA47

SA48–SA51

SA52–SA55

SA56–SA59

SA60–SA63

A21–A15

01000

01001

01010

01011

01100

01101

01110

01111

Sector Group

SA64–SA67

SA68–SA71

SA72–SA75

SA76–SA79

SA80–SA83

SA84–SA87

SA88–SA91

SA92–SA95

A21–A15

10000

10001

10010

10011

10100

10101

10110

10111

Sector Group

SA96–SA99

A21–A15

11000

11001

11010

11011

11100

11101

11110

11111

SA100–SA103

SA104–SA107

SA108–SA111

SA112–SA115

SA116–SA119

SA120–SA123

SA124–SA127

Note: All sector groups are 128 Kwords in size.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

33

A d v a n c e I n f o r m a t i o n

Temporary Sector Group Unprotect

This feature allows temporary unprotection of previously protected sector groups

to change data in-system. The Sector Group Unprotect mode is activated by set-

ting the RESET# pin to V_ID. During this mode, formerly protected sector groups

can be programmed or erased by selecting the sector group addresses. Once V_ID

is removed from the RESET# pin, all the previously protected sector groups are

protected again. Figure 1 shows the algorithm, and Figure 22 shows the timing

diagrams, for this feature.

START

RESET# = V

(Note 1)

ID

Perform Erase or

Program Operations

RESET# = V

IH

Temporary Sector

Group Unprotect Completed

(Note 2)

Notes:

1. All protected sector groups unprotected (If WP# = V , the highest or lowest address sector will remain protected for

IL

uniform sector devices; the top or bottom two address sectors will remain protected for boot sector devices).

2. All previously protected sector groups are protected once again.

Figure 1. Temporary Sector Group Unprotect Operation

34

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

START

PLSCNT = 1

Protect all sector

groups: The indicated

portion of the sector

group protect algorithm

must be performed for all

unprotected sector

groups prior to issuing

the first sector group

unprotect address

RESET# = V_ID

Wait 1 µs

Temporary Sector

Group Unprotect

Mode

Temporary Sector

Group Unprotect

Mode

No

First Write

Cycle = 60h?

No

First Write

Cycle = 60h?

Yes

Set up sector

group address

All sector

groups

No

protected?

Yes

Sector Group Protect:

Write 60h to sector

group address with

A6–A0 = 0xx0010

Set up first sector

group address

Sector Group

Unprotect:

Wait 150 µs

Write 60h to sector

group address with

A6–A0 = 1xx0010

Verify Sector Group

Protect: Write 40h

to sector group

address with

A6–A0 = 0xx0010

Reset

PLSCNT = 1

Increment

PLSCNT

Wait 15 ms

Verify Sector Group

Unprotect: Write

40h to sector group

address with

Read from

sector group address

with A6–A0

= 0xx0010

Increment

PLSCNT

A6–A0 = 1xx0010

No

PLSCNT

= 25?

Read from

sector group

address with

Data = 01h?

Yes

A6–A0 = 1xx0010

No

Yes

Set up

next sector group

address

Protect

another

sector group?

Yes

No

PLSCNT

= 1000?

Data = 00h?

Yes

Device failed

No

Yes

Remove V_ID

from RESET#

Last sector

group

verified?

No

Device failed

Write reset

command

Yes

Remove V_ID

from RESET#

Sector Group

Unprotect

Sector Group

Protect

Sector Group

Protect complete

Write reset

command

Algorithm

Sector Group

Unprotect complete

Figure 2. In-System Sector Group Protect/Unprotect Algorithms

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

35

A d v a n c e I n f o r m a t i o n

Secured Silicon Sector Flash Memory Region

The Secured Silicon Sector feature provides a Flash memory region that enables

permanent part identification through an Electronic Serial Number (ESN). The

Secured Silicon Sector is 256 bytes in length, and uses a Secured Silicon Sector

Indicator Bit (DQ7) to indicate whether or not the Secured Silicon Sector is locked

when shipped from the factory. This bit is permanently set at the factory and can-

not be changed, which prevents cloning of a factory locked part. This ensures the

security of the ESN once the product is shipped to the field.

The factory offers the device with the Secured Silicon Sector either customer

lockable (standard shipping option) or factory locked (contact a Spansion sales

representative for ordering information). The customer-lockable version is

shipped with the Secured Silicon Sector unprotected, allowing customers to pro-

gram the sector after receiving the device. The customer-lockable version also

has the Secured Silicon Sector Indicator Bit permanently set to a “0.” The factory-

locked version is always protected when shipped from the factory, and has the

Secured Silicon Sector Indicator Bit permanently set to a “1.” Thus, the Secured

Silicon Sector Indicator Bit prevents customer-lockable devices from being used

to replace devices that are factory locked. Note that the ACC function and unlock

bypass modes are not available when the Secured Silicon Sector is enabled.

The Secured Silicon sector address space in this device is allocated as follows:

Secured Silicon Sector Address Range

Standard Factory

Locked

ExpressFlash Factory

Locked

x16

x8

Customer Lockable

ESN or determined by

customer

000000h–000007h

000008h–00007Fh

000000h-00000Fh

000010h-0000FFh

ESN

Determined by customer

Unavailable

Determined by customer

The system accesses the Secured Silicon Sector through a command sequence

(see “Write Protect (WP#)”). After the system has written the Enter Secured Sil-

icon Sector command sequence, it may read the Secured Silicon Sector by using

the addresses normally occupied by the first sector (SA0). This mode of operation

continues until the system issues the Exit Secured Silicon Sector command se-

quence, or until power is removed from the device. On power-up, or following a

hardware reset, the device reverts to sending commands to sector SA0.

Customer Lockable: Secured Silicon Sector NOT Programmed or

Protected At the Factory

Unless otherwise specified, the device is shipped such that the customer may

program and protect the 256-byte Secured Silicon sector.

The system may program the Secured Silicon Sector using the write-buffer, ac-

celerated and/or unlock bypass methods, in addition to the standard

programming command sequence. See “Command Definitions” .

Programming and protecting the Secured Silicon Sector must be used with cau-

tion since, once protected, there is no procedure available for unprotecting the

Secured Silicon Sector area and none of the bits in the Secured Silicon Sector

memory space can be modified in any way.

The Secured Silicon Sector area can be protected using one of the following

procedures:

Write the three-cycle Enter Secured Silicon Sector Region command se-

quence, and then follow the in-system sector protect algorithm as shown in

36

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Figure 2, except that RESET# may be at either V_IHor V_ID. This allows in-sys-

tem protection of the Secured Silicon Sector without raising any device pin to

a high voltage. Note that this method is only applicable to the Secured Silicon

Sector.

Write the three-cycle Enter Secured Silicon Sector Region command se-

quence, and then use the alternate method of sector protection described in

the “Sector Group Protection and Unprotection” section.

Once the Secured Silicon Sector is programmed, locked and verified, the system

must write the Exit Secured Silicon Sector Region command sequence to return

to reading and writing within the remainder of the array.

Factory Locked: Secured Silicon Sector Programmed and

Protected At the Factory

In devices with an ESN, the Secured Silicon Sector is protected when the device

is shipped from the factory. The Secured Silicon Sector cannot be modified in any

way. An ESN Factory Locked device has an 16-byte random ESN at addresses

000000h–000007h. Please contact your sales representative for details on order-

ing ESN Factory Locked devices.

Customers may opt to have their code programmed by the factory through the

Spansion programming service (Customer Factory Locked). The devices are then

shipped from the factory with the Secured Silicon Sector permanently locked.

Contact your sales representative for details on using the Spansion programming

service.

Write Protect (WP#)

The Write Protect function provides a hardware method of protecting the first or

last sector group without using V_ID. Write Protect is one of two functions provided

by the WP#/ACC input.

If the system asserts V_ILon the WP#/ACC pin, the device disables program and

erase functions in the first or last sector group independently of whether those

sector groups were protected or unprotected. Note that if WP#/ACC is at V_IL

when the device is in the standby mode, the maximum input load current is in-

creased. See the table in “DC Characteristics” section on page 65.

If the system asserts V_IHon the WP#/ACC pin, the device reverts to

whether the first or last sector was previously set to be protected or un-

protected using the method described in “Sector Group Protection and

Unprotection”. Note that WP# has an internal pullup; when uncon-

nected, WP# is at V_IH

.

Hardware Data Protection

The command sequence requirement of unlock cycles for programming or erasing

provides data protection against inadvertent writes (refer to Table 25 and Table

26 for command definitions). In addition, the following hardware data protection

measures prevent accidental erasure or programming, which might otherwise be

caused by spurious system level signals during V_CCpower-up and power-down

transitions, or from system noise.

Low V

Write Inhibit

CC

When V_CCis less than V_LKO, the device does not accept any write cycles. This pro-

tects data during V_CCpower-up and power-down. The command register and all

internal program/erase circuits are disabled, and the device resets to the read

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

37

A d v a n c e I n f o r m a t i o n

mode. Subsequent writes are ignored until V_CCis greater than V_LKO. The system

must provide the proper signals to the control pins to prevent unintentional writes

when V_CCis greater than V_LKO

.

Write Pulse “Glitch” Protection

Noise pulses of less than 3 ns (typical) on OE#, CE# or WE# do not initiate a write

cycle.

Logical Inhibit

Write cycles are inhibited by holding any one of OE# = V_IL, CE# = V_IHor WE# =

V_IH. To initiate a write cycle, CE# and WE# must be a logical zero while OE# is a

logical one.

Power-Up Write Inhibit

If WE# = CE# = V_ILand OE# = V_IHduring power up, the device does not accept

commands on the rising edge of WE#. The internal state machine is automatically

reset to the read mode on power-up.

38

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Common Flash Memory Interface (CFI)

The Common Flash Interface (CFI) specification outlines device and host system

software interrogation handshake, which allows specific vendor-specified soft-

ware algorithms to be used for entire families of devices. Software support can

then be device-independent, JEDEC ID-independent, and forward- and back-

ward-compatible for the specified flash device families. Flash vendors can

standardize their existing interfaces for long-term compatibility.

This device enters the CFI Query mode when the system writes the CFI Query

command, 98h, to address 55h, any time the device is ready to read array data.

The system can read CFI information at the addresses given in Table 21-Table 24.

To terminate reading CFI data, the system must write the reset command.

The system can also write the CFI query command when the device is in the au-

toselect mode. The device enters the CFI query mode, and the system can read

CFI data at the addresses given in Table 21-Table 24. The system must write the

reset command to return the device to reading array data.

For further information, please refer to the CFI Specification and CFI Publication

100. Alternatively, contact your sales representative for copies of these

documents.

Table 21. CFI Query Identification String

Addresses

(x16)

Addresses

(x8)

Data

Description

10h

11h

12h

20h

22h

24h

0051h

0052h

0059h

Query Unique ASCII string “QRY”

13h

14h

26h

28h

0002h

0000h

Primary OEM Command Set

15h

16h

2Ah

2Ch

0040h

0000h

Address for Primary Extended Table

17h

18h

2Eh

30h

0000h

Alternate OEM Command Set (00h = none exists)

Address for Alternate OEM Extended Table (00h = none exists)

19h

1Ah

32h

34h

0000h

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

39

A d v a n c e I n f o r m a t i o n

Table 22. System Interface String

Addresses

(x16)

Addresses

(x8)

Data

Description

V_CCMin. (write/erase)

D7–D4: volt, D3–D0: 100 millivolt

1Bh

1Ch

36h

38h

0027h

V_CCMax. (write/erase)

D7–D4: volt, D3–D0: 100 millivolt

0036h

1Dh

1Eh

1Fh

20h

21h

22h

23h

24h

25h

26h

3Ah

3Ch

3Eh

40h

42h

44h

46h

48h

4Ah

4Ch

0000h

0007h

000Ah

0000h

0001h

0005h

0004h

0000h

V_PPMin. voltage (00h = no V_PPpin present)

V_PPMax. voltage (00h = no V_PPpin present)

Reserved for future use

Typical timeout for Min. size buffer write 2^N

µs (00h = not supported)

Typical timeout per individual block erase 2^Nms

Typical timeout for full chip erase 2^Nms (00h = not supported)

Reserved for future use

Max. timeout for buffer write 2^Ntimes typical

Max. timeout per individual block erase 2^Ntimes typical

Max. timeout for full chip erase 2^Ntimes typical (00h = not supported)

Note: CFI data related to V and time-outs may differ from actual V and time-outs of the product. Please consult the Ordering

CC

Information tables to obtain the V range for particular part numbers. Please consult the Erase and Programming Performance table

CC

for typical timeout specifications.

40

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Table 23. Device Geometry Definition

Addresses

(x16)

Addresses

(x8)

Data

Description

Device Size = 2^Nbyte

27h

4Eh

00xxh

0017h = 64 Mb, 0016h = 32Mb

Flash Device Interface description (refer to CFI publication 100)

28h

29h

50h

52h

000xh

0000h

0000h = x8-only bus devices

0001h = x16-only bus devices

0002h = x8/x16 bus devices

2Ah

2Bh

54h

56h

0005h

0000h

Max. number of byte in multi-byte write = 2^N

(00h = not supported)

Number of Erase Block Regions within device (01h = uniform device,

02h = boot device)

2Ch

58h

00xxh

Erase Block Region 1 Information

2Dh

2Eh

2Fh

30h

5Ah

5Ch

5Eh

60h

00xxh

000xh

00x0h

000xh

(refer to the CFI specification or CFI publication 100)

007Fh, 0000h, 0020h, 0000h = 32 Mb (-R1, -R2)

003Fh, 0000h, 0001h = 32 Mb (-R3, R4)

007Fh, 0000h, 0020h, 0000h = 64 Mb (-R1, -R2, -R8, -R9)

007Fh, 0000h, 0000h, 0001h = 64 Mb (-R3, -R4, -R5, -R6, -R7)

31h

32h

33h

34h

60h

64h

66h

68h

00xxh

0000h

000xh

Erase Block Region 2 Information (refer to CFI publication 100)

003Eh, 0000h, 0000h, 0001h = 32 Mb (-R1, -R2)

007Eh, 0000h, 0000h, 0001h = 64 Mb (-R1, -R2, -R8, -R9)

0000h, 0000h, 0000h, 0000h = all others

35h

36h

37h

38h

6Ah

6Ch

6Eh

70h

0000h

Erase Block Region 3 Information (refer to CFI publication 100)

Erase Block Region 4 Information (refer to CFI publication 100)

39h

3Ah

3Bh

3Ch

72h

74h

76h

78h

0000h

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

41

A d v a n c e I n f o r m a t i o n

Table 24. Primary Vendor-Specific Extended Query

Addresses

(x16)

Addresses

(x8)

Data

Description

40h

41h

42h

80h

82h

84h

0050h

0052h

0049h

Query-unique ASCII string “PRI”

43h

44h

86h

88h

0031h

0033h

Major version number, ASCII

Minor version number, ASCII

Address Sensitive Unlock (Bits 1-0)

0 = Required, 1 = Not Required

45h

8Ah

000xh

Process Technology (Bits 7-2) 0010b = 200 nm MirrorBit

0009h = x8-only bus devices

0008h = all other devices

Erase Suspend

46h

47h

48h

49h

4Ah

4Bh

4Ch

8Ch

8Eh

90h

92h

94h

96h

98h

0002h

0001h

0004h

0000h

0001h

0 = Not Supported, 1 = To Read Only, 2 = To Read & Write

Sector Protect

0 = Not Supported, X = Number of sectors in per group

Sector Temporary Unprotect

00 = Not Supported, 01 = Supported

Sector Protect/Unprotect scheme

0004h = Standard Mode (Refer to Text)

Simultaneous Operation

00 = Not Supported, X = Number of Sectors in Bank

Burst Mode Type

00 = Not Supported, 01 = Supported

Page Mode Type

00 = Not Supported, 01 = 4 Word Page, 02 = 8 Word Page

ACC (Acceleration) Supply Minimum

4Dh

4Eh

9Ah

9Ch

00B5h

00C5h

00h = Not Supported, D7-D4: Volt, D3-D0: 100 mV

ACC (Acceleration) Supply Maximum

00h = Not Supported, D7-D4: Volt, D3-D0: 100 mV

Top/Bottom Boot Sector Flag

4Fh

50h

9Eh

A0h

00xxh

0001h

02h = Bottom Boot Device, 03h = Top Boot Device, 04h = Uniform

sectors bottom WP# protect, 05h = Uniform sectors top WP# protect

Program Suspend

00h = Not Supported, 01h = Supported

42

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Command Definitions

Writing specific address and data commands or sequences into the command

register initiates device operations. Table 25 and Table 26 define the valid register

command sequences. Writing incorrect address and data values or writing them

in the improper sequence may place the device in an unknown state. A reset com-

mand is then required to return the device to reading array data.

All addresses are latched on the falling edge of WE# or CE#, whichever happens

later. All data is latched on the rising edge of WE# or CE#, whichever happens

first. Refer to the AC Characteristics section for timing diagrams.

Reading Array Data

The device is automatically set to reading array data after device power-up. No

commands are required to retrieve data. The device is ready to read array data

after completing an Embedded Program or Embedded Erase algorithm.

After the device accepts an Erase Suspend command, the device enters the

erase-suspend-read mode, after which the system can read data from any non-

erase-suspended sector. After completing a programming operation in the Erase

Suspend mode, the system may once again read array data with the same ex-

ception. See the Erase Suspend/Erase Resume Commands section for more

information.

The system must issue the reset command to return the device to the read (or

erase-suspend-read) mode if DQ5 goes high during an active program or erase

operation, or if the device is in the autoselect mode. See the next section, Reset

Command, for more information.

See also Requirements for Reading Array Data in the Device Bus Operations sec-

tion for more information. The Read-Only Operations–“AC Characteristics”

section on page 67 provides the read parameters, and Figure 13 shows the timing

diagram.

Reset Command

Writing the reset command resets the device to the read or erase-suspend-read

mode. Address bits are don’t cares for this command.

The reset command may be written between the sequence cycles in an erase

command sequence before erasing begins. This resets the device to the read

mode. Once erasure begins, however, the device ignores reset commands until

the operation is complete.

The reset command may be written between the sequence cycles in a program

command sequence before programming begins. This resets the device to the

read mode. If the program command sequence is written while the device is in

the Erase Suspend mode, writing the reset command returns the device to the

erase-suspend-read mode. Once programming begins, however, the device ig-

nores reset commands until the operation is complete.

The reset command may be written between the sequence cycles in an autoselect

command sequence. Once in the autoselect mode, the reset command must be

written to return to the read mode. If the device entered the autoselect mode

while in the Erase Suspend mode, writing the reset command returns the device

to the erase-suspend-read mode.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

43

A d v a n c e I n f o r m a t i o n

If DQ5 goes high during a program or erase operation, writing the reset command

returns the device to the read mode (or erase-suspend-read mode if the device

was in Erase Suspend).

Note that if DQ1 goes high during a Write Buffer Programming operation, the sys-

tem must write the Write-to-Buffer-Abort Reset command sequence to reset the

device for the next operation.

Autoselect Command Sequence

The autoselect command sequence allows the host system to read several iden-

tifier codes at specific addresses:

A7:A0

(x16)

A6:A-1

(x8)

Identifier Code

Manufacturer ID

Device ID, Cycle 1

00h

01h

00h

02h

Device ID, Cycle 2

0Eh

1Ch

Device ID, Cycle 3

0Fh

1Eh

Secured Silicon Sector Factory Protect

Sector Protect Verify

03h

06h

(SA)02h

(SA)04h

Note: The device ID is read over three cycles. SA = Sector Address

The autoselect command sequence is initiated by first writing two unlock cycles.

This is followed by a third write cycle that contains the autoselect command. The

device then enters the autoselect mode. The system may read at any address any

number of times without initiating another autoselect command sequence:

The system must write the reset command to return to the read mode (or erase-

suspend-read mode if the device was previously in Erase Suspend).

Enter Secured Silicon Sector/Exit Secured Silicon

Sector Command Sequence

The Secured Silicon Sector region provides a secured data area containing an 8-

word/16-byte random Electronic Serial Number (ESN). The system can access

the Secured Silicon Sector region by issuing the three-cycle Enter Secured Silicon

Sector command sequence. The device continues to access the Secured Silicon

Sector region until the system issues the four-cycle Exit Secured Silicon Sector

command sequence. The Exit Secured Silicon Sector command sequence returns

the device to normal operation. Table 25 and Table 26 show the address and data

requirements for both command sequences. See also “Secured Silicon Sector

Flash Memory Region” for further information. Note that the ACC function and un-

lock bypass modes are not available when the Secured Silicon Sector is enabled.

Word Program Command Sequence

Programming is a four-bus-cycle operation. The program command sequence is

initiated by writing two unlock write cycles, followed by the program set-up com-

mand. The program address and data are written next, which in turn initiate the

Embedded Program algorithm. The system is not required to provide further con-

trols or timings. The device automatically provides internally generated program

pulses and verifies the programmed cell margin. Table 25 and Table 26 show the

address and data requirements for the word program command sequence,

respectively.

44

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

When the Embedded Program algorithm is complete, the device then returns to

the read mode and addresses are no longer latched. The system can determine

the status of the program operation by using DQ7 or DQ6. Refer to the Write Op-

eration Status section for information on these status bits. Any commands

written to the device during the Embedded Program Algorithm are ignored. Note

that the Secured Silicon Sector, autoselect, and CFI functions are unavailable

when a program operation is in progress. Note that a hardware reset immedi-

ately terminates the program operation. The program command sequence should

be reinitiated once the device has returned to the read mode, to ensure data

integrity.

Programming is allowed in any sequence of address locations and across sector

boundaries. Programming to the same word address multiple times without in-

tervening erases (incremental bit programming) requires a modified

programming method. For such application requirements, please contact your

local Spansion representative. Word programming is supported for backward

compatibility with existing Flash driver software and for occasional writing of in-

dividual words. Use of write buffer programming (see below) is strongly

recommended for general programming use when more than a few words are to

be programmed. The effective word programming time using write buffer pro-

gramming is approximately four times shorter than the single word programming

time.

Any bit in a word cannot be programmed from “0” back to a “1.” Attempt-

ing to do so may cause the device to set DQ5=1, or cause DQ7 and DQ6 status

bits to indicate the operation was successful. However, a succeeding read will

show that the data is still “0.” Only erase operations can convert a “0” to a “1.”

Unlock Bypass Command Sequence

The unlock bypass feature allows the system to program words to the device

faster than using the standard program command sequence. The unlock bypass

command sequence is initiated by first writing two unlock cycles. This is followed

by a third write cycle containing the unlock bypass command, 20h. The device

then enters the unlock bypass mode. A two-cycle unlock bypass mode command

sequence is all that is required to program in this mode. The first cycle in this se-

quence contains the unlock bypass program command, A0h; the second cycle

contains the program address and data. Additional data is programmed in the

same manner. This mode dispenses with the initial two unlock cycles required in

the standard program command sequence, resulting in faster total programming

time.Table 25 and Table 26 show the requirements for the command sequence.

During the unlock bypass mode, only the Unlock Bypass Program and Unlock By-

pass Reset commands are valid. To exit the unlock bypass mode, the system

must issue the two-cycle unlock bypass reset command sequence. The first cycle

must contain the data 90h. The second cycle must contain the data 00h. The de-

vice then returns to the read mode.

Write Buffer Programming

Write Buffer Programming allows the system write to a maximum of 16 words/32

bytes in one programming operation. This results in faster effective programming

time than the standard programming algorithms. The Write Buffer Programming

command sequence is initiated by first writing two unlock cycles. This is followed

by a third write cycle containing the Write Buffer Load command written at the

Sector Address in which programming will occur. The fourth cycle writes the sec-

tor address and the number of word locations, minus one, to be programmed. For

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

45

A d v a n c e I n f o r m a t i o n

example, if the system will program 6 unique address locations, then 05h should

be written to the device. This tells the device how many write buffer addresses

will be loaded with data and therefore when to expect the Program Buffer to Flash

command. The number of locations to program cannot exceed the size of the

write buffer or the operation will abort.

The fifth cycle writes the first address location and data to be programmed. The

write-buffer-page is selected by address bits A_MAX–A₄. All subsequent address/

data pairs must fall within the selected-write-buffer-page. The system then

writes the remaining address/data pairs into the write buffer. Write buffer loca-

tions may be loaded in any order.

The write-buffer-page address must be the same for all address/data pairs loaded

into the write buffer. (This means Write Buffer Programming cannot be performed

across multiple write-buffer pages.) This also means that Write Buffer Program-

ming cannot be performed across multiple sectors. If the system attempts to load

programming data outside of the selected write-buffer page, the operation will

abort.

Note that if a Write Buffer address location is loaded multiple times, the address/

data pair counter will be decremented for every data load operation. The host

system must therefore account for loading a write-buffer location more than

once. The counter decrements for each data load operation, not for each unique

write-buffer-address location. Note also that if an address location is loaded more

than once into the buffer, the final data loaded for that address will be

programmed.

Once the specified number of write buffer locations have been loaded, the system

must then write the Program Buffer to Flash command at the sector address. Any

other address and data combination aborts the Write Buffer Programming oper-

ation. The device then begins programming. Data polling should be used while

monitoring the last address location loaded into the write buffer. DQ7, DQ6, DQ5,

and DQ1 should be monitored to determine the device status during Write Buffer

Programming.

The write-buffer programming operation can be suspended using the standard

program suspend/resume commands. Upon successful completion of the Write

Buffer Programming operation, the device is ready to execute the next command.

The Write Buffer Programming Sequence can be aborted in the following ways:

Load a value that is greater than the page buffer size during the Number of

Locations to Program step.

Write to an address in a sector different than the one specified during the

Write-Buffer-Load command.

Write an Address/Data pair to a different write-buffer-page than the one se-

lected by the Starting Address during the write buffer data loading stage of

the operation.

Write data other than the Confirm Command after the specified number of

data load cycles.

The abort condition is indicated by DQ1 = 1, DQ7 = DATA# (for the last address

location loaded), DQ6 = toggle, and DQ5=0. A Write-to-Buffer-Abort Reset com-

mand sequence must be written to reset the device for the next operation.

Note that the Secured Silicon Sector, autoselect, and CFI functions are unavail-

able when a program operation is in progress.This flash device is capable of

handling multiple write buffer programming operations on the same write buffer

address range without intervening erases. For applications requiring incremental

46

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

bit programming, a modified programming method is required; please contact

your local Spansion representative. Any bit in a write buffer address range

cannot be programmed from “0” back to a “1.” Attempting to do so may

cause the device to set DQ5=1, of cause the DQ7 and DQ6 status bits to indicate

the operation was successful. However, a succeeding read will show that the data

is still “0.” Only erase operations can convert a “0” to a “1.”

Accelerated Program

The device offers accelerated program operations through the WP#/ACC or ACC

pin depending on the particular product. When the system asserts V_HHon the

WP#/ACC or ACC pin. The device uses the higher voltage on the WP#/ACC or ACC

pin to accelerate the operation. Note that the WP#/ACC pin must not be at V_HH

for operations other than accelerated programming, or device damage may re-

sult. WP# has an internal pullup; when unconnected, WP# is at V_IH

.

Figure 3 illustrates the algorithm for the program operation. Refer to the Erase

and Program Operations–“AC Characteristics” section on page 67 section for pa-

rameters, and Figure 14 for timing diagrams.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

47

A d v a n c e I n f o r m a t i o n

Write “Write to Buffer”

command and

Sector Address

Part of “Write to Buffer”

Command Sequence

Write number of addresses

to program minus 1(WC)

and Sector Address

Write first address/data

Yes

WC = 0 ?

No

Write to a different

sector address

Abort Write to

Buffer Operation?

Yes

Write to buffer ABORTED.

Must write “Write-to-buffer

Abort Reset” command

sequence to return

No

Write next address/data pair

(Note 1)

to read mode.

WC = WC - 1

Write program buffer to

flash sector address

Read DQ7 - DQ0 at

Last Loaded Address

Yes

DQ7 = Data?

No

DQ1 = 1?

DQ5 = 1?

Yes

Read DQ7 - DQ0 with

address = Last Loaded

Address

Yes

(Note 2)

DQ7 = Data?

No

FAIL or ABORT

PASS

(Note 3)

Notes:

1. When Sector Address is specified, any address in the selected sector is acceptable. However, when loading Write-Buffer

address locations with data, all addresses must fall within the selected Write-Buffer Page.

2. DQ7 may change simultaneously with DQ5. Therefore, DQ7 should be verified.

3. If this flowchart location was reached because DQ5= “1”, then the device FAILED. If this flowchart location was reached

because DQ1= “1”, then the Write to Buffer operation was ABORTED. In either case, the proper reset command must be

written before the device can begin another operation. If DQ1=1, write the Write-Buffer-Programming-Abort-Reset

command. if DQ5=1, write the Reset command.

4. See Table 25 and Table 26 for command sequences required for write buffer programming.

Figure 3. Write Buffer Programming Operation

48

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

START

Write Program

Command Sequence

Data Poll

from System

Embedded

Program

algorithm

in progress

Verify Data?

Yes

No

Increment Address

Last Address?

Yes

Programming

Completed

Note:See Table 25 and Table 26 for program command sequence

.

Figure 4. Program Operation

Program Suspend/Program Resume Command Sequence

The Program Suspend command allows the system to interrupt a programming

operation or a Write to Buffer programming operation so that data can be read

from any non-suspended sector. When the Program Suspend command is written

during a programming process, the device halts the program operation within 15

µs maximum (5µs typical) and updates the status bits. Addresses are not re-

quired when writing the Program Suspend command.

After the programming operation has been suspended, the system can read array

data from any non-suspended sector. The Program Suspend command may also

be issued during a programming operation while an erase is suspended. In this

case, data may be read from any addresses not in Erase Suspend or Program

Suspend. If a read is needed from the Secured Silicon Sector area (One-time Pro-

gram area), then user must use the proper command sequences to enter and exit

this region. Note that the Secured Silicon Sector, autoselect, and CFI functions

are unavailable when a program operation is in progress.

The system may also write the autoselect command sequence when the device

is in the Program Suspend mode. The system can read as many autoselect codes

as required. When the device exits the autoselect mode, the device reverts to the

Program Suspend mode, and is ready for another valid operation. See Autoselect

Command Sequence for more information.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

49

A d v a n c e I n f o r m a t i o n

After the Program Resume command is written, the device reverts to program-

ming. The system can determine the status of the program operation using the

DQ7 or DQ6 status bits, just as in the standard program operation. See Write Op-

eration Status for more information.

The system must write the Program Resume command (address bits are don’t

care) to exit the Program Suspend mode and continue the programming opera-

tion. Further writes of the Resume command are ignored. Another Program

Suspend command can be written after the device has resumed programming.

Program Operation

or Write-to-Buffer

Sequence in Progress

Write Program Suspend

Command Sequence

Write address/data

XXXh/B0h

Command is also valid for

Erase-suspended-program

operations

Wait 15 µs

Autoselect and SecSi Sector

read operations are also allowed

Read data as

required

Data cannot be read from erase- or

program-suspended sectors

Done

No

reading?

Yes

Write Program Resume

Command Sequence

Write address/data

XXXh/30h

Device reverts to

operation prior to

Program Suspend

Figure 5. Program Suspend/Program Resume

Chip Erase Command Sequence

Chip erase is a six bus cycle operation. The chip erase command sequence is ini-

tiated by writing two unlock cycles, followed by a set-up command. Two

additional unlock write cycles are then followed by the chip erase command,

which in turn invokes the Embedded Erase algorithm. The device does not require

the system to preprogram prior to erase. The Embedded Erase algorithm auto-

matically preprograms and verifies the entire memory for an all zero data pattern

prior to electrical erase. The system is not required to provide any controls or tim-

ings during these operations. Table 25 and Table 26 show the address and data

requirements for the chip erase command sequence.

When the Embedded Erase algorithm is complete, the device returns to the read

mode and addresses are no longer latched. The system can determine the status

of the erase operation by using DQ7, DQ6, or DQ2. Refer to the Write Operation

Status section for information on these status bits.

50

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Any commands written during the chip erase operation are ignored. However,

note that a hardware reset immediately terminates the erase operation. If that

occurs, the chip erase command sequence should be reinitiated once the device

has returned to reading array data, to ensure data integrity.

Figure 6 illustrates the algorithm for the erase operation. Refer to the Erase and

Program Operations table in the AC Characteristics section for parameters, and

Figure 18 section for timing diagrams.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

51

A d v a n c e I n f o r m a t i o n

Sector Erase Command Sequence

Sector erase is a six bus cycle operation. The sector erase command sequence is

initiated by writing two unlock cycles, followed by a set-up command. Two addi-

tional unlock cycles are written, and are then followed by the address of the

sector to be erased, and the sector erase command. Table 25 and Table 26 shows

the address and data requirements for the sector erase command sequence.

The device does not require the system to preprogram prior to erase. The Em-

bedded Erase algorithm automatically programs and verifies the entire memory

for an all zero data pattern prior to electrical erase. The system is not required to

provide any controls or timings during these operations.

After the command sequence is written, a sector erase time-out of 50 µs occurs.

During the time-out period, additional sector addresses and sector erase com-

mands may be written. Loading the sector erase buffer may be done in any

sequence, and the number of sectors may be from one sector to all sectors. The

time between these additional cycles must be less than 50 µs, otherwise erasure

may begin. Any sector erase address and command following the exceeded time-

out may or may not be accepted. It is recommended that processor interrupts be

disabled during this time to ensure all commands are accepted. The interrupts

can be re-enabled after the last Sector Erase command is written. Any com-

mand other than Sector Erase or Erase Suspend during the time-out

period resets the device to the read mode. Note that the Secured Silicon

Sector, autoselect, and CFI functions are unavailable when an erase op-

eration is in progress. The system must rewrite the command sequence and

any additional addresses and commands.

The system can monitor DQ3 to determine if the sector erase timer has timed out

(See the section on DQ3: Sector Erase Timer.). The time-out begins from the ris-

ing edge of the final WE# pulse in the command sequence.

When the Embedded Erase algorithm is complete, the device returns to reading

array data and addresses are no longer latched. The system can determine the

status of the erase operation by reading DQ7, DQ6, or DQ2 in the erasing sector.

Refer to the Write Operation Status section for information on these status bits.

Once the sector erase operation has begun, only the Erase Suspend command is

valid. All other commands are ignored. However, note that a hardware reset im-

mediately terminates the erase operation. If that occurs, the sector erase

command sequence should be reinitiated once the device has returned to reading

array data, to ensure data integrity.

Figure 6 illustrates the algorithm for the erase operation. Refer to the Erase and

Program Operations table in the AC Characteristics section for parameters, and

Figure 18 section for timing diagrams.

52

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

START

Write Erase

Command Sequence

(Notes 1, 2)

Data Poll to Erasing

Bank from System

Embedded

Erase

algorithm

in progress

No

Data = FFh?

Yes

Erasure Completed

Notes:

1. See Table 25 and Table 26 for program command sequence.

2. See the section on DQ3 for information on the sector erase timer.

Figure 6. Erase Operation

Erase Suspend/Erase Resume Commands

The Erase Suspend command, B0h, allows the system to interrupt a sector erase

operation and then read data from, or program data to, any sector not selected

for erasure. This command is valid only during the sector erase operation, includ-

ing the 50 µs time-out period during the sector erase command sequence. The

Erase Suspend command is ignored if written during the chip erase operation or

Embedded Program algorithm.

When the Erase Suspend command is written during the sector erase operation,

the device requires a typical of 5 µs (maximum of 20 µs) to suspend the erase

operation. However, when the Erase Suspend command is written during the sec-

tor erase time-out, the device immediately terminates the time-out period and

suspends the erase operation.

After the erase operation has been suspended, the device enters the erase-sus-

pend-read mode. The system can read data from or program data to any sector

not selected for erasure. (The device “erase suspends” all sectors selected for

erasure.) Reading at any address within erase-suspended sectors produces sta-

tus information on DQ7–DQ0. The system can use DQ7, or DQ6 and DQ2

together, to determine if a sector is actively erasing or is erase-suspended. Refer

to the Write Operation Status section for information on these status bits.

After an erase-suspended program operation is complete, the device returns to

the erase-suspend-read mode. The system can determine the status of the pro-

gram operation using the DQ7 or DQ6 status bits, just as in the standard word

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

53

A d v a n c e I n f o r m a t i o n

program operation. Refer to the Write Operation Status section for more

information.

In the erase-suspend-read mode, the system can also issue the autoselect com-

mand sequence. Refer to the “Autoselect Mode” section on page 30 and

“Autoselect Command Sequence” section on page 44 sections for details.

To resume the sector erase operation, the system must write the Erase Resume

command. Further writes of the Resume command are ignored. Another Erase

Suspend command can be written after the chip has resumed erasing.

Note:During an erase operation, this flash device performs multiple internal operations which are invisible to the system. When an

erase operation is suspended, any of the internal operations that were not fully completed must be restarted. As such, if this flash

device is continually issued suspend/resume commands in rapid succession, erase progress will be impeded as a function of the

number of suspends. The result will be a longer cumulative erase time than without suspends. Note that the additional suspends do

not affect device reliability or future performance. In most systems rapid erase/suspend activity occurs only briefly. In such cases,

erase performance will not be significantly impacted

.

54

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Command Definitions

Table 25. Command Definitions (x16 Mode, BYTE# = V

)

IH

Bus Cycles (Notes 2–5)

Command

Sequence

(Note 1)

First

Second

Third

Fourth

Fifth

Sixth

Addr Data

Addr

Data

Addr

Data

Addr

Data

Addr Data Addr Data

Read (Note 6)

Reset (Note 7)

1

4

RA

XXX

555

RD

F0

Manufacturer ID

AA

2AA

55

555

90

X00

X01

0001

227E

(Note

18)

(Note

18)

Device ID (Note 9)

4

555

AA

X0E

X0F

Secured SiliconSector Factory

Protect (Note 10)

2AA

55

555

90

X03

(Note 10)

00/01

Sector Group Protect Verify (Note

12)

4

555

AA

(SA)X02

Enter Secured Silicon Sector Region

Exit Secured Silicon Sector Region

Program

3

4

3

1

3

2

6

1

555

SA

AA

29

2AA

55

555

SA

88

90

A0

25

XXX

PA

00

PD

WC

Write to Buffer (Note 11)

Program Buffer to Flash

Write to Buffer Abort Reset (Note 13)

Unlock Bypass

SA

PA

PD

WBL

PD

555

XXX

555

XXX

55

AA

A0

90

2AA

PA

55

PD

00

55

555

F0

20

Unlock Bypass Program (Note 14)

Unlock Bypass Reset (Note 15)

Chip Erase

XXX

2AA

AA

B0

30

555

80

555

AA

2AA

55

555

SA

10

30

Sector Erase

Program/Erase Suspend (Note 16)

Program/Erase Resume (Note 17)

CFI Query (Note 18)

98

Legend:

X = Don’t care

RA = Read Address of memory location to be read.

PD = Program Data for location PA. Data latches on rising edge of

WE# or CE# pulse, whichever happens first.

SA = Sector Address of sector to be verified (in autoselect mode) or

erased. Address bits A21–A15 uniquely select any sector.

WBL = Write Buffer Location. Address must be within same write

buffer page as PA.

RD = Read Data read from location RA during read operation.

PA = Program Address. Addresses latch on falling edge of WE# or

CE# pulse, whichever happens later.

WC = Word Count. Number of write buffer locations to load minus 1.

Notes:

1. See Table 3 for description of bus operations.

2. All values are in hexadecimal.

10. Data is 00h for an unprotected sector group and 01h for a

protected sector group.

11. Total number of cycles in command sequence is determined by

number of words written to write buffer. Maximum number of

cycles in command sequence is 21, including “Program Buffer to

Flash” command.

12. Command sequence resets device for next command after

aborted write-to-buffer operation.

13. Unlock Bypass command is required prior to Unlock Bypass

Program command.

14. Unlock Bypass Reset command is required to return to read

mode when device is in unlock bypass mode.

3. Shaded cells indicate read cycles. All others are write cycles.

4. During unlock and command cycles, when lower address bits are

555 or 2AA as shown in table, address bits above A11 and data

bits above DQ7 are don’t care.

5. No unlock or command cycles required when device is in read

mode.

6. Reset command is required to return to read mode (or to erase-

suspend-read mode if previously in Erase Suspend) when device

is in autoselect mode, or if DQ5 goes high while device is

providing status information.

15. System may read and program in non-erasing sectors, or enter

autoselect mode, when in Erase Suspend mode. Erase Suspend

command is valid only during a sector erase operation.

16. Erase Resume command is valid only during Erase Suspend

mode.

7. Fourth cycle of the autoselect command sequence is a read

cycle. Data bits DQ15–DQ8 are don’t care. Except for RD, PD

and WC. See Autoselect Command Sequence section for more

information.

8. Device ID must be read in three cycles.

17. Command is valid when device is ready to read array data or

when device is in autoselect mode.

18. Refer to Table 12, AutoSelect Codes for individual Device IDs

per device density and model number.

9. If WP# protects highest address sector, data is 98h for factory

locked and 18h for not factory locked. If WP# protects lowest

address sector, data is 88h for factory locked and 08h for not

factor locked.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

55

A d v a n c e I n f o r m a t i o n

Table 26. Command Definitions (x8 Mode, BYTE# = V )

IL

Bus Cycles (Notes 2–5)

Command

Sequence

(Note 1)

First

Second

Third

Fourth

Fifth

Addr Data

Sixth

Addr Data

Addr Data Addr Data Addr Data

Addr

Data

Read (Note 6)

Reset (Note 7)

Manufacturer ID

1

4

RA

RD

F0

XXX

AAA

AA

555

55

AAA

90

X00

X02

01

7E

Device ID (Note 9)

X1C (Note 17) X1E (Note 17)

Secured Silicon Sector Factory

Protect (Note 10)

4

AAA

AA

555

55

AAA

90

X06

(Note 10)

Sector Group Protect Verify (Note

12)

4

AAA

AA

555

55

AAA

90

(SA)X04

00/01

Enter Secured Silicon Sector Region

Exit Secured Silicon Sector Region

Write to Buffer (Note 11)

3

4

3

1

3

6

1

AAA

SA

AA

29

555

55

AAA

SA

88

90

25

XXX

SA

00

BC

PA

PD

WBL

PD

Program Buffer to Flash

Write to Buffer Abort Reset (Note 13)

Chip Erase

AAA

XXX

AA

B0

30

555

55

AAA

F0

80

AAA

AA

555

55

AAA

SA

10

30

Sector Erase

Program/Erase Suspend (Note 14)

Program/Erase Resume (Note 15)

CFI Query (Note 16)

98

Legend:

X = Don’t care

PD = Program Data for location PA. Data latches on rising edge of

WE# or CE# pulse, whichever happens first.

SA = Sector Address of sector to be verified (in autoselect mode) or

erased. Address bits A21–A15 uniquely select any sector.

WBL = Write Buffer Location. Address must be within same write

buffer page as PA.

RA = Read Address of memory location to be read.

RD = Read Data read from location RA during read operation.

PA = Program Address. Addresses latch on falling edge of WE# or

CE# pulse, whichever happens later.

BC = Byte Count. Number of write buffer locations to load minus 1.

Notes:

1. See Table 3 for description of bus operations.

2. All values are in hexadecimal.

3. Shaded cells indicate read cycles. All others are write cycles.

4. During unlock and command cycles, when lower address bits are

555 or AAA as shown in table, address bits above A11 are don’t

care.

10. If WP# protects highest address sector, data is 98h for factory

locked and 18h for not factory locked. If WP# protects lowest

address sector, data is 88h for factory locked and 08h for not

factor locked.

11. Data is 00h for an unprotected sector group and 01h for a

protected sector group.

12. Total number of cycles in command sequence is determined by

number of bytes written to write buffer. Maximum number of

cycles in command sequence is 37, including “Program Buffer to

Flash” command.

13. Command sequence resets device for next command after

aborted write-to-buffer operation.

14. System may read and program in non-erasing sectors, or enter

autoselect mode, when in Erase Suspend mode. Erase Suspend

command is valid only during a sector erase operation.

15. Erase Resume command is valid only during Erase Suspend

mode.

5. Unless otherwise noted, address bits A21–A11 are don’t cares.

6. No unlock or command cycles required when device is in read

mode.

7. Reset command is required to return to read mode (or to erase-

suspend-read mode if previously in Erase Suspend) when device

is in autoselect mode, or if DQ5 goes high while device is

providing status information.

8. Fourth cycle of autoselect command sequence is a read cycle.

Data bits DQ15–DQ8 are don’t care. See Autoselect Command

Sequence section or more information.

9. Device ID must be read in three cycles.

16. Command is valid when device is ready to read array data or

when device is in autoselect mode.

17. Refer to Table 12, AutoSelect Codes for individual Device IDs

per device density and model number.

56

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Write Operation Status

The device provides several bits to determine the status of a program or erase

operation: DQ2, DQ3, DQ5, DQ6, and DQ7. Table 27 and the following subsec-

tions describe the function of these bits. DQ7 and DQ6 each offer a method for

determining whether a program or erase operation is complete or in progress.

The device also provides a hardware-based output signal, RY/BY#, to determine

whether an Embedded Program or Erase operation is in progress or has been

completed.

DQ7: Data# Polling

The Data# Polling bit, DQ7, indicates to the host system whether an Embedded

Program or Erase algorithm is in progress or completed, or whether the device is

in Erase Suspend. Data# Polling is valid after the rising edge of the final WE#

pulse in the command sequence.

During the Embedded Program algorithm, the device outputs on DQ7 the com-

plement of the datum programmed to DQ7. This DQ7 status also applies to

programming during Erase Suspend. When the Embedded Program algorithm is

complete, the device outputs the datum programmed to DQ7. The system must

provide the program address to read valid status information on DQ7. If a pro-

gram address falls within a protected sector, Data# Polling on DQ7 is active for

approximately 1 µs, then the device returns to the read mode.

During the Embedded Erase algorithm, Data# Polling produces a “0” on DQ7.

When the Embedded Erase algorithm is complete, or if the device enters the

Erase Suspend mode, Data# Polling produces a “1” on DQ7. The system must

provide an address within any of the sectors selected for erasure to read valid

status information on DQ7.

After an erase command sequence is written, if all sectors selected for erasing

are protected, Data# Polling on DQ7 is active for approximately 100 µs, then the

device returns to the read mode. If not all selected sectors are protected, the Em-

bedded Erase algorithm erases the unprotected sectors, and ignores the selected

sectors that are protected. However, if the system reads DQ7 at an address within

a protected sector, the status may not be valid.

Just prior to the completion of an Embedded Program or Erase operation, DQ7

may change asynchronously with DQ0–DQ6 while Output Enable (OE#) is as-

serted low. That is, the device may change from providing status information to

valid data on DQ7. Depending on when the system samples the DQ7 output, it

may read the status or valid data. Even if the device has completed the program

or erase operation and DQ7 has valid data, the data outputs on DQ0–DQ6 may

be still invalid. Valid data on DQ0–DQ7 will appear on successive read cycles.

Table 27 shows the outputs for Data# Polling on DQ7. Figure 7 shows the Data#

Polling algorithm. Figure 19 in the AC Characteristics section shows the Data#

Polling timing diagram.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

57

A d v a n c e I n f o r m a t i o n

START

Read DQ15–DQ0

Addr = VA

Yes

DQ7 = Data?

No

DQ5 = 1?

Yes

Read DQ15–DQ0

Addr = VA

Yes

DQ7 = Data?

No

PASS

FAIL

Notes:

1. VA = Valid address for programming. During a sector erase operation, a valid address is any sector address within the sector

being erased. During chip erase, a valid address is any non-protected sector address.

2. DQ7 should be rechecked even if DQ5 = “1” because DQ7 may change simultaneously with DQ5.

Figure 7. Data# Polling Algorithm

RY/BY#: Ready/Busy#

The RY/BY# is a dedicated, open-drain output pin which indicates whether an

Embedded Algorithm is in progress or complete. The RY/BY# status is valid after

the rising edge of the final WE# pulse in the command sequence. Since RY/BY#

is an open-drain output, several RY/BY# pins can be tied together in parallel with

a pull-up resistor to V_CC

.

If the output is low (Busy), the device is actively erasing or programming. (This

includes programming in the Erase Suspend mode.) If the output is high (Ready),

the device is in the read mode, the standby mode, or in the erase-suspend-read

mode. Table 27 shows the outputs for RY/BY#.

58

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

DQ6: Toggle Bit I

Toggle Bit I on DQ6 indicates whether an Embedded Program or Erase algorithm

is in progress or complete, or whether the device has entered the Erase Suspend

mode. Toggle Bit I may be read at any address, and is valid after the rising edge

of the final WE# pulse in the command sequence (prior to the program or erase

operation), and during the sector erase time-out.

During an Embedded Program or Erase algorithm operation, successive read cy-

cles to any address cause DQ6 to toggle. The system may use either OE# or CE#

to control the read cycles. When the operation is complete, DQ6 stops toggling.

After an erase command sequence is written, if all sectors selected for erasing

are protected, DQ6 toggles for approximately 100 µs, then returns to reading

array data. If not all selected sectors are protected, the Embedded Erase algo-

rithm erases the unprotected sectors, and ignores the selected sectors that are

protected.

The system can use DQ6 and DQ2 together to determine whether a sector is ac-

tively erasing or is erase-suspended. When the device is actively erasing (that is,

the Embedded Erase algorithm is in progress), DQ6 toggles. When the device en-

ters the Erase Suspend mode, DQ6 stops toggling. However, the system must

also use DQ2 to determine which sectors are erasing or erase-suspended. Alter-

natively, the system can use DQ7 (see the subsection on DQ7: Data# Polling).

If a program address falls within a protected sector, DQ6 toggles for approxi-

mately 1 µs after the program command sequence is written, then returns to

reading array data.

DQ6 also toggles during the erase-suspend-program mode, and stops toggling

once the Embedded Program algorithm is complete.

Table 27 shows the outputs for Toggle Bit I on DQ6. Figure 8 shows the toggle bit

algorithm. Figure 20 in the “AC Characteristics” section shows the toggle bit tim-

ing diagrams. Figure 21 shows the differences between DQ2 and DQ6 in graphical

form. See also the subsection on DQ2: Toggle Bit II.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

59

A d v a n c e I n f o r m a t i o n

START

Read DQ7–DQ0

No

Toggle Bit

= Toggle?

Yes

No

DQ5 = 1?

Yes

Read DQ7–DQ0

Twice

Toggle Bit

= Toggle?

No

Yes

Program/Erase

Operation Not

Complete, Write

Reset Command

Program/Erase

Operation Complete

Notes:

1. The system should recheck the toggle bit even if DQ5 = “1” because the toggle bit may stop toggling as DQ5 changes

to “1.” See the subsections on DQ6 and DQ2 for more information.

Figure 8. Toggle Bit Algorithm

60

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

DQ2: Toggle Bit II

The “Toggle Bit II” on DQ2, when used with DQ6, indicates whether a particular

sector is actively erasing (that is, the Embedded Erase algorithm is in progress),

or whether that sector is erase-suspended. Toggle Bit II is valid after the rising

edge of the final WE# pulse in the command sequence.

DQ2 toggles when the system reads at addresses within those sectors that have

been selected for erasure. (The system may use either OE# or CE# to control the

read cycles.) But DQ2 cannot distinguish whether the sector is actively erasing or

is erase-suspended. DQ6, by comparison, indicates whether the device is actively

erasing, or is in Erase Suspend, but cannot distinguish which sectors are selected

for erasure. Thus, both status bits are required for sector and mode information.

Refer to Table 27 to compare outputs for DQ2 and DQ6.

Figure 8 shows the toggle bit algorithm in flowchart form, and the section “DQ2:

Toggle Bit II” explains the algorithm. See also the RY/BY#: Ready/Busy# subsec-

tion. Figure 20 shows the toggle bit timing diagram. Figure 21 shows the

differences between DQ2 and DQ6 in graphical form.

Reading Toggle Bits DQ6/DQ2

Refer to Figure 8 for the following discussion. Whenever the system initially be-

gins reading toggle bit status, it must read DQ7–DQ0 at least twice in a row to

determine whether a toggle bit is toggling. Typically, the system would note and

store the value of the toggle bit after the first read. After the second read, the

system would compare the new value of the toggle bit with the first. If the toggle

bit is not toggling, the device has completed the program or erase operation. The

system can read array data on DQ7–DQ0 on the following read cycle.

However, if after the initial two read cycles, the system determines that the toggle

bit is still toggling, the system also should note whether the value of DQ5 is high

(see the section on DQ5). If it is, the system should then determine again

whether the toggle bit is toggling, since the toggle bit may have stopped toggling

just as DQ5 went high. If the toggle bit is no longer toggling, the device has suc-

cessfully completed the program or erase operation. If it is still toggling, the

device did not completed the operation successfully, and the system must write

the reset command to return to reading array data.

The remaining scenario is that the system initially determines that the toggle bit

is toggling and DQ5 has not gone high. The system may continue to monitor the

toggle bit and DQ5 through successive read cycles, determining the status as de-

scribed in the previous paragraph. Alternatively, it may choose to perform other

system tasks. In this case, the system must start at the beginning of the algo-

rithm when it returns to determine the status of the operation (top of Figure 8).

DQ5: Exceeded Timing Limits

DQ5 indicates whether the program, erase, or write-to-buffer time has ex-

ceeded a specified internal pulse count limit. Under these conditions DQ5

produces a “1,” indicating that the program or erase cycle was not successfully

completed.

The device may output a “1” on DQ5 if the system tries to program a “1” to a

location that was previously programmed to “0.” Only an erase operation can

change a “0” back to a “1.” Under this condition, the device halts the opera-

tion, and when the timing limit has been exceeded, DQ5 produces a “1.”

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

61

A d v a n c e I n f o r m a t i o n

In all these cases, the system must write the reset command to return the device

to the reading the array (or to erase-suspend-read if the device was previously

in the erase-suspend-program mode).

DQ3: Sector Erase Timer

After writing a sector erase command sequence, the system may read DQ3 to de-

termine whether or not erasure has begun. (The sector erase timer does not

apply to the chip erase command.) If additional sectors are selected for erasure,

the entire time-out also applies after each additional sector erase command.

When the time-out period is complete, DQ3 switches from a “0” to a “1.” If the

time between additional sector erase commands from the system can be as-

sumed to be less than 50 µs, the system need not monitor DQ3. See also the

Sector Erase Command Sequence section.

After the sector erase command is written, the system should read the status of

DQ7 (Data# Polling) or DQ6 (Toggle Bit I) to ensure that the device has accepted

the command sequence, and then read DQ3. If DQ3 is “1,” the Embedded Erase

algorithm has begun; all further commands (except Erase Suspend) are ignored

until the erase operation is complete. If DQ3 is “0,” the device will accept addi-

tional sector erase commands. To ensure the command has been accepted, the

system software should check the status of DQ3 prior to and following each sub-

sequent sector erase command. If DQ3 is high on the second status check, the

last command might not have been accepted.

Table 27 shows the status of DQ3 relative to the other status bits.

DQ1: Write-to-Buffer Abort

DQ1 indicates whether a Write-to-Buffer operation was aborted. Under these

conditions DQ1 produces a “1”. The system must issue the Write-to-Buffer-Abort-

Reset command sequence to return the device to reading array data. See Write

Buffer section for more details.

62

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Table 27. Write Operation Status

DQ7

(Note 2)

DQ5

(Note 1) DQ3

DQ2

(Note 2)

RY/

BY#

Status

DQ6

Toggle

DQ1

0

Embedded Program Algorithm

Embedded Erase Algorithm

Program-Suspended

DQ7#

0

N/A

1

No toggle

Toggle

0

Standard

Mode

N/A

Invalid (not allowed)

Data

1

0

Program

Suspend

Mode

Program-

Suspend

Read

Sector

Non-Program

Suspended Sector

Erase-Suspended

Sector

1

No toggle

Toggle

0

N/A

Toggle

N/A

Erase-

Suspend

Read

Erase

Suspend

Mode

Non-Erase

Suspended Sector

Data

Erase-Suspend-Program

(Embedded Program)

DQ7#

0

N/A

Busy (Note 3)

Abort (Note 4)

DQ7#

Toggle

0

N/A

0

1

0

Write-to-

Buffer

Notes:

1. DQ5 switches to ‘1’ when an Embedded Program, Embedded Erase, or Write-to-Buffer operation has exceeded the

maximum timing limits. Refer to the section on DQ5 for more information.

2. DQ7 and DQ2 require a valid address when reading status information. Refer to the appropriate subsection for

further details.

3. The Data# Polling algorithm should be used to monitor the last loaded write-buffer address location.

4. DQ1 switches to ‘1’ when the device has aborted the write-to-buffer operation.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

63

A d v a n c e I n f o r m a t i o n

Absolute Maximum Ratings

Storage Temperature, Plastic Packages. . . . . . . . . . . . . . . . –65°C to +150°C

Ambient Temperature with Power Applied . . . . . . . . . . . . . . –65°C to +125°C

Voltage with Respect to Ground:

V_CC(Note 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to +4.0 V

A9, OE#, ACC and RESET# (Note 2) . . . . . . . . . . . . .–0.5 V to +12.5 V

All other pins (Note 1). . . . . . . . . . . . . . . . . . . . . –0.5 V to V_CC+0.5 V

Output Short Circuit Current (Note 3). . . . . . . . . . . . . . . . . . . . . . . . 200 mA

Notes:

1. Minimum DC voltage on input or I/Os is –0.5 V. During voltage transitions, inputs

or I/Os may overshoot V to –2.0 V for periods of up to 20 ns. See Figure 9.

SS

Maximum DC voltage on input or I/Os is V + 0.5 V. During voltage transitions,

CC

input or I/O pins may overshoot to V + 2.0 V for periods up to 20 ns. See Figure

CC

10.

2. Minimum DC input voltage on pins A9, OE#, ACC, and RESET# is –0.5 V. During

voltage transitions, A9, OE#, ACC, and RESET# may overshoot V to –2.0 V for

SS

periods of up to 20 ns. See Figure 9. Maximum DC input voltage on pin A9, OE#,

ACC, and RESET# is +12.5 V which may overshoot to +14.0V for periods up to

20 ns.

3. No more than one output may be shorted to ground at a time. Duration of the short

circuit should not be greater than one second.

4. Stresses above those listed under “Absolute Maximum Ratings” may cause

permanent damage to the device. This is a stress rating only; functional operation

of the device at these or any other conditions above those indicated in the

operational sections of this data sheet is not implied. Exposure of the device to

absolute maximum rating conditions for extended periods may affect device

reliability.

20 ns

V

+0.8 V

CC

+2.0 V

V

–0.5 V

–2.0 V

CC

+0.5 V

2.0 V

20 ns

Figure 9. Maximum Negative

Overshoot Waveform

Figure 10. Maximum Positive

Overshoot Waveform

Operating Ranges

Industrial (I) Devices

Ambient Temperature (T_A) . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C

Supply Voltages

V_CCfor full voltage range . . . . . . . . . . . . . . . . . . . . . . . . . +2.7 V to +3.6 V

V_CCfor regulated voltage range. . . . . . . . . . . . . . . . . . . . . +3.0 V to +3.6 V

V_IO

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V_CC

Note:Operating ranges define those limits between which the functionality of the device is guaranteed

.

64

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

DC Characteristics

CMOS Compatible

Parameter

Parameter Description (Notes)

Test Conditions

= V to V

Min

Typ

Max

Unit

Symbol

V

,

CC

IN

CC

SS

= V

I

Input Load Current (Note 1)

A9, ACC Input Load Current

±1.0

µA

LI

CC max

-40°C to 0°C

0°C to 85°C

250

35

V

= V

12.5 V

; A9 =

CC

CC max

I

µA

LIT

I

Reset Leakage Current

Output Leakage Current

V

= V

; RESET# = 12.5 V

35

µA

LR

CC

CC max

V

= V to V

SS

CC max

,

CC

OUT

±1.0

LO

= V

CC

1 MHz

5

20

25

50

20

40

60

CE# = V OE# =

IH

IL,

I

V

Initial Read Current (Notes 2, 3)

5 MHz

18

35

5

mA

CC1

CC2

CC

V

,

10 MHz

40 MHz

I

V

Intra-Page Read Current (Notes 2, 3) CE# = V OE# = V

CC

IL,

IH

10

50

I

V

Active Write Current (Note 3)

Standby Current (Note 3)

Reset Current (Note 3)

CE# = V OE# = V

IH

mA

µA

CC3

CC4

CC5

CC6

CC

IL,

CE#, RESET# = V ± 0.3 V,

CC

1

5

WP# = V

IH

RESET# = V ± 0.3 V, WP# = V

SS

IH

V

= V ± 0.3 V;

CC

IH

Automatic Sleep Mode (Notes 3, 5)

5

-0.1< V ≤ 0.3 V, WP# = V

IL

IH

V

Input Low Voltage 1 (Note 6)

Input High Voltage 1 (Note 6)

–0.5

0.8

V

IL

V

0.7 V

V

+ 0.5

IH

CC

Voltage for ACC Program

Acceleration

V

= 2.7 –3.6 V

11.5

12.0

12.5

V

HH

CC

Voltage for Autoselect and Temporary

Sector Unprotect

V

12.5

0.45

ID

V

Output Low Voltage (Note 6)

Output High Voltage

I

= 4.0 mA, V = V

CC min

V

OL

OH

CC

V

= –2.0 mA, V = V

0.85 V

CC

OH1

OH2

CC

CC min

V

= –100 µA, V = V

V

–0.4

CC

V

Low V Lock-Out Voltage (Note 7)

2.3

2.5

LKO

CC

Notes:

1. On the WP#/ACC pin only, the maximum input load current when WP# = V_ILis ± 5.0 µA.

2. The I_CCcurrent listed is typically less than 3.5 mA/MHz, with OE# at V_IH

.

3. Maximum I_CCspecifications are tested with V_CC= V_CCmax.

4. I_CCactive while Embedded Erase or Embedded Program is in progress.

5. Automatic sleep mode enables the low power mode when addresses remain stable for t_ACC+ 30 ns.

6. V_CCvoltage requirements.

7. Not 100% tested.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

65

A d v a n c e I n f o r m a t i o n

Test Conditions

Table 28. Test Specifications

3.3 V

Test Condition

Output Load

All Speeds

1 TTL gate

Unit

2.7 kΩ

Device

Under

Test

Output Load Capacitance, C_L

(including jig capacitance)

30

pF

Input Rise and Fall Times

Input Pulse Levels

5

ns

V

C

L

6.2 k

Ω

0.0 or V_CC

Input timing measurement

reference levels (See Note)

0.5 V_CC

V

Output timing measurement

reference levels

Note: Diodes are IN3064 or equivalent.

Figure 11. Test Setup

Key to Switching Waveforms

Waveform

Inputs

Outputs

Steady

Changing from H to L

Changing from L to H

Don’t Care, Any Change Permitted

Does Not Apply

Changing, State Unknown

Center Line is High Impedance State (High Z)

V

CC

0.5 V

Input

0.5 V

Measurement Level

Output

CC

0.0 V

Figure 12. Input Waveforms and Measurement Levels

66

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

AC Characteristics

Read-Only Operations-S29GL064A only

Parameter

Speed Options

JEDEC

Std.

Description

Test Setup

90

10

100

30

11

110

30

Unit

ns

t

Read Cycle Time (Note 1)

Address to Output Delay

Min

Max

90

25

AVAV

RC

t

CE#, OE# = V

IL

ns

AVQV

ACC

t

OE# = V

IL

Chip Enable to Output Delay

Page Access Time

ns

ELQV

CE

t

ns

PACC

t

Output Enable to Output Delay

Chip Enable to Output High Z (Note 1)

Output Enable to Output High Z (Note 1)

30

ns

GLQV

OE

t

16

ns

EHQZ

DF

t

16

0

ns

GHQZ

DF

Output Hold Time From Addresses, CE# or OE#, Whichever Occurs

First

t

Min

ns

AXQX

OH

Read

0

Output Enable Hold Time

t

OEH

Toggle and

(Note 1)

10

Data# Polling

Notes:

1. Not 100% tested.

2. See Figure 11 and Table 28 for test specifications.

Read-Only Operations-S29GL032A only

Parameter

Speed Options

JEDEC

Std.

Description

Test Setup

90

10

100

30

11

Unit

ns

t

Read Cycle Time (Note 1)

Address to Output Delay

Chip Enable to Output Delay

Page Access Time

Min

Max

90

25

110

30

AVAV

RC

t

CE#, OE# = V

IL

ns

AVQV

ACC

t

OE# = V

IL

ns

ELQV

CE

t

ns

PACC

t

Output Enable to Output Delay

30

ns

GLQV

OE

t

Chip Enable to Output High Z (Note 1)

Output Enable to Output High Z (Note 1)

16

ns

EHQZ

DF

t

16

ns

GHQZ

DF

Output Hold Time From Addresses, CE# or OE#,

Whichever Occurs First

t

Min

0

ns

AXQX

OH

Read

t

Output Enable Hold Time (Note 1)

OEH

Toggle and

Data# Polling

10

Notes:

1. Not 100% tested.

2. See Figure 11 and Table 28 for test specifications.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

67

A d v a n c e I n f o r m a t i o n

t_RC

Addresses Stable

t_ACC

Addresses

CE#

t_RH

t_DF

t_OE

OE#

t_OEH

WE#

t_CE

t_OH

HIGH Z

Output Valid

Outputs

RESET#

RY/BY#

0 V

Figure 13. Read Operation Timings

Same Page

A23-A2

A1-A0*

Ad

Aa

Ab

Ac

t_PACC

t_ACC

Data Bus

Qa

Qb

Qc

Qd

CE#

OE#

Note: * Figure shows device in word mode. Addresses are A1–A-1 for byte mode

.

Figure 14. Page Read Timings

68

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Hardware Reset (RESET#)

Parameter

JEDEC Std.

Description

All Speed Options

Unit

RESET# Pin Low (During Embedded Algorithms)

to Read Mode (See Note)

t_Ready

Max

20

µs

RESET# Pin Low (NOT During Embedded

Algorithms) to Read Mode (See Note)

t_Ready

500

ns

t_RP

t_RH

t_RPD

t_RB

RESET# Pulse Width

Min

500

50

20

0

ns

µs

ns

Reset High Time Before Read (See Note)

RESET# Input Low to Standby Mode (See Note)

RY/BY# Output High to CE#, OE# pin Low

Note:Not 100% tested

.

RY/BY#

CE#, OE#

RESET#

t_RH

t_RP

t_Ready

Reset Timings NOT during Embedded Algorithms

Reset Timings during Embedded Algorithms

t_Ready

RY/BY#

t_RB

CE#, OE#

RESET#

t_RH

t_RP

Notes:

1. Not 100% tested.

2. See the “Erase and Programming Performance” section for more information.

3. For 1–16 words/1–32 bytes programmed.

Figure 15. Reset Timings

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

69

A d v a n c e I n f o r m a t i o n

Erase and Program Operations-S29GL064A Only

Parameter

JEDEC

Speed Options

Std.

Description

90

10

11

Unit

ns

t

Write Cycle Time (Note 1)

Address Setup Time

Min

90

100

110

AVAV

WC

t

0

15

45

0

AVWL

AS

t

Address Setup Time to OE# low during toggle bit polling

Address Hold Time

ASO

t

WLAX

DVWH

AH

t

Address Hold Time From CE# or OE# high during toggle bit polling

Data Setup Time

AHT

t

35

0

DS

t

Data Hold Time

WHDX

DH

t

CE# High during toggle bit polling

OE# High during toggle bit polling

Read Recovery Time Before Write (OE# High to WE# Low)

CE# Setup Time

20

0

CEPH

OEPH

GHWL

t

GHWL

t

0

ELWL

WHEH

WLWH

CS

t

CE# Hold Time

0

CH

t

Write Pulse Width

35

WP

t

Write Pulse Width High

Min

Typ

30

240

60

WHDL

WPH

Write Buffer Program Operation (Notes 2, 3)

Single Word Program Operation (Note 2)

Accelerated Single Word Program Operation (Note 2)

Sector Erase Operation (Note 2)

t

µs

WHWH1

54

0.5

sec

ns

µs

ns

µs

WHWH2

t

V

Rise and Fall Time (Note 1)

Setup Time (Note 1)

Min

Max

250

50

VHH

HH

CC

t

VCS

t

WE# High to RY/BY# Low

90

100

4

110

BUSY

t

Program Valid before Status Polling

POLL

Notes:

1. Not 100% tested.

2. See the “Erase and Programming Performance” section for more information.

3. For 1–16 words/1–32 bytes programmed.

4. If a program suspend command is issued within t_POLL, the device requires t_POLLbefore reading status data, once

programming has resumed (that is, the program resume command has been written). If the suspend command was issued

after t_POLL, status data is available immediately after programming has resumed. See Figure 16.

70

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Erase and Program Operations-S29GL032A Only

Parameter

Speed Options

JEDEC

Std.

Description

90

10

100

0

11

110

Unit

ns

t

Write Cycle Time (Note 1)

Address Setup Time

Min

90

AVAV

WC

t

AVWL

AS

t

Address Setup Time to OE# low during toggle bit polling

Address Hold Time

15

45

0

ASO

t

WLAX

AH

t

Address Hold Time From CE# or OE# high during toggle bit polling

Data Setup Time

AHT

t

35

0

DVWH

DS

t

Data Hold Time

WHDX

DH

t

CE# High during toggle bit polling

OE# High during toggle bit polling

Read Recovery Time Before Write (OE# High to WE# Low)

CE# Setup Time

20

0

CEPH

OEPH

GHWL

t

GHWL

t

0

ELWL

CS

t

CE# Hold Time

0

WHEH

CH

t

Write Pulse Width

35

WLWH

WP

t

Write Pulse Width High

Min

Typ

30

240

60

WHDL

WPH

Write Buffer Program Operation (Notes 2, 3)

Single Word Program Operation (Note 2)

Accelerated Single Word Program Operation (Note 2)

Sector Erase Operation (Note 2)

t

µs

WHWH1

54

t

0.5

sec

ns

µs

ns

µs

WHWH2

t

V

Rise and Fall Time (Note 1)

Setup Time (Note 1)

Min

Max

250

50

VHH

HH

CC

t

VCS

t

WE# High to RY/BY# Low

90

100

4

110

BUSY

t

Program Valid before Status Polling

POLL

Notes:

1. Not 100% tested.

2. See “Erase And Programming Performance” for more information

3. For 1–16 words/1–32 bytes programmed.

4. Effective write buffer specification is based upon a 16-word/32-byte write buffer operation.

5. If a program suspend command is issued within t_POLL, the device requires t_POLLbefore reading status data, once

programming resumes (that is, the program resume command has been written). If the suspend command was issued after

t_POLL, status data is available immediately after programming resumes. See Figure 16.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

71

A d v a n c e I n f o r m a t i o n

Program Command Sequence (last two cycles)

Read Status Data (last two cycles)

t_AS

t_WC

Addresses

555h

PA

t_AH

CE#

OE#

t_CH

t_POLL

t_WP

WE#

Data

t_WPH

t_CS

t_WHWH1

t_DS

t_DH

PD

D_OUT

A0h

Status

t_BUSY

t_RB

RY/BY#

V_CC

t_VCS

Notes:

1. PA = program address, PD = program data, D

is the true data at the program address.

OUT

2. Illustration shows device in word mode.

Figure 16. Program Operation Timings

V

V_HH

HH

V

or V

V_ILor V_IH

V

or V

IL

IH

V_ILor V_IH

IL

IH

ACC

t

t_VHH

VHH

t_VHH

VHH

Figure 17. Accelerated Program Timing Diagram

72

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Erase Command Sequence (last two cycles)

Read Status Data

VA

t_AS

SA

t_WC

VA

Addresses

CE#

2AAh

555h for chip erase

t_AH

t_CH

OE#

t_WP

WE#

t_WPH

t_WHWH2

t_CS

t_DS

t_DH

In

Data

Complete

55h

30h

Progress

10 for Chip Erase

t_BUSY

t_RB

RY/BY#

V_CC

t_VCS

Notes:

1. SA = sector address (for Sector Erase), VA = Valid Address for reading status data (see “Write Operation Status”.)

2. Illustration shows device in word mode.

Figure 18. Chip/Sector Erase Operation Timings

t_RC

Addresses

CE#

VA

t_ACC

t_CE

VA

t_POLL

t_CH

t_OE

OE#

WE#

t_DF

t_OH

t_OEH

High Z

DQ7

Valid Data

Complement

True

DQ0–DQ6

Status Data

True

Valid Data

Status Data

t_BUSY

RY/BY#

Note: VA = Valid address. Illustration shows first status cycle after command sequence, last status read cycle, and array

data read cycle.

Figure 19. Data# Polling Timings (During Embedded Algorithms)

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

73

A d v a n c e I n f o r m a t i o n

t_AHT

t_AS

Addresses

CE#

t_AHT

t_ASO

t_CEPH

t_OEH

WE#

OE#

t_OEPH

t_DH

Valid Data

t_OE

Valid

Status

Valid

Status

Valid

Status

DQ6 / DQ2

Valid Data

(first read)

(second read)

(stops toggling)

RY/BY#

Note: VA = Valid address; not required for DQ6. Illustration shows first two status cycle after command sequence, last

status read cycle, and array data read cycle.

Figure 20. Toggle Bit Timings (During Embedded Algorithms)

Enter

Erase

Suspend

Enter Erase

Suspend Program

Embedded

Erasing

Erase

Resume

Erase

Erase Suspend

Read

Erase

WE#

Erase

Erase Suspend

Read

Suspend

Program

Complete

DQ6

DQ2

Note: DQ2 toggles only when read at an address within an erase-suspended sector. The system may use OE# or CE#

to toggle DQ2 and DQ6.

Figure 21. DQ2 vs. DQ6

74

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

Temporary Sector Unprotect

Parameter

JEDEC

Std

t_VIDR

Description

V_IDRise and Fall Time (See Note)

All Speed Options

Unit

Min

500

ns

RESET# Setup Time for Temporary Sector

Unprotect

t_RSP

4

µs

Notes:

1. Not 100% tested.

V_ID

RESET#

V_SS, V_IL,

or V_IH

V_SS, V_IL,

or V_IH

t_VIDR

Program or Erase Command Sequence

CE#

WE#

t_RRB

t_RSP

RY/BY#

Figure 22. Temporary Sector Group Unprotect Timing Diagram

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

75

A d v a n c e I n f o r m a t i o n

V_ID

V_IH

RESET#

SA, A6,

A3, A2,

A1, A0

Valid*

Sector Group Protect or Unprotect

60h 60h

Valid*

Status

Verify

40h

Data

Sector Group Protect: 150 µs,

Sector Group Unprotect: 15 ms

1 µs

CE#

WE#

OE#

Note: For sector group protect, A6:A0 = 0xx0010. For sector group unprotect, A6:A0 = 1xx0010.

Figure 23. Sector Group Protect and Unprotect Timing Diagram

76

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

AC Characteristics

Alternate CE# Controlled Erase and Program Operations-S29GL064A

Parameter

JEDEC Std.

Speed Options

Unit

Description

Write Cycle Time (Note 1)

90

10

100

0

11

t

Min

Typ

Min

Max

90

110

ns

AVAV

AVWL

WC

t

Address Setup Time

AS

AH

DS

DH

t

Address Hold Time

45

35

0

ELAX

DVEH

EHDX

t

Data Setup Time

t

Data Hold Time

t

Read Recovery Time Before Write (OE# High to WE# Low)

WE# Setup Time

0

GHEL

t

0

WLEL

WS

t

WE# Hold Time

0

EHWH

WH

t

CE# Pulse Width

35

25

240

60

54

0.5

50

4

ELEH

EHEL

CP

t

CE# Pulse Width High

CPH

Write Buffer Program Operation (Notes 2, 3)

Single Word Program Operation (Note 2)

Accelerated Single Word Program Operation (Note 2)

Sector Erase Operation (Note 2)

RESET# High Time Before Write

Program Valid before Status Polling (Note 5)

t

µs

WHWH1

WHWH2

WHWH1

sec

ns

WHWH2

t

RH

t

µs

POLL

Notes:

1. Not 100% tested.

2. See the “Erase and Programming Performance” section for more information.

3. For 1–16 words/1–32 bytes programmed.

4. If a program suspend command is issued within t_POLL, the device requires t_POLLbefore reading status data, once

programming has resumed (that is, the program resume command has been written). If the suspend command was issued

after t_POLL, status data is available immediately after programming has resumed. See Figure 24.

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

77

A d v a n c e I n f o r m a t i o n

Alternate CE# Controlled Erase and Program Operations-S29GL032A

Parameter

JEDEC

Speed Options

Std.

Description

90

10

100

0

11

Unit

ns

t

Write Cycle Time (Note 1)

Address Setup Time

Address Hold Time

Data Setup Time

Min

90

110

AVAV

WC

t

ns

AVWL

AS

t

45

ns

ELAX

AH

t

35

0

ns

DVEH

DS

t

Data Hold Time

ns

EHDX

DH

Read Recovery Time Before Write

(OE# High to WE# Low)

t

GHEL

Min

0

ns

GHEL

WLEL

t

WE# Setup Time

WE# Hold Time

Min

0

ns

WS

t

EHWH

WH

t

CE# Pulse Width

CE# Pulse Width High

35

ELEH

EHEL

CP

t

CPH

Min

Typ

25

240

60

Write Buffer Program Operation (Notes 2, 3)

Single Word Program Operation (Note 2)

Accelerated Single Word Program Operation (Note 2)

Sector Erase Operation (Note 2)

t

µs

WHWH1

WHWH2

54

0.5

sec

ns

WHWH2

t

RESET# High Time Before Write

Min

50

4

RH

t

Program Valid before Status Polling (Note 4)

Max

µs

POLL

Notes:

1. Not 100% tested.

2. See “Erase And Programming Performance” for more information

3. For 1–16 words/1–32 bytes programmed.

4. If a program suspend command is issued within t_POLL, the device requires t_POLLbefore reading status data, once

programming resumes (that is, the program resume command has been written). If the suspend command was issued after

t_POLL, status data is available immediately after programming resumes. See Figure 24.

78

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

PBA for program

2AA for erase

SA for program buffer to flash

SA for sector erase

555 for chip erase

Data# Polling

Addresses

PA

t_WC

t_WH

t_AS

t_AH

WE#

OE#

t_POLL

t_GHEL

t_{WHWH1 or 2}

t_CP

CE#

Data

t_WS

t_CPH

t_DS

t_BUSY

t_DH

DQ7#

D_OUT

t_RH

PBD for program 29 for program buffer to flash

55 for erase

30 for sector erase

10 for chip erase

RESET#

RY/BY#

Notes:

1. Figure indicates last two bus cycles of a program or erase operation.

2. PA = program address, SA = sector address, PD = program data.

3. DQ7# is the complement of the data written to the device. D

4. Illustration shows device in word mode.

is the data written to the device.

OUT

Figure 24. Alternate CE# Controlled Write (Erase/Program) Operation Timings

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

79

A d v a n c e I n f o r m a t i o n

Erase And Programming Performance

Max

Parameter

Typ (Note 1)

(Note 2)

Unit

Comments

Sector Erase Time

0.5

32

3.5

64

Excludes 00h

programming

prior to erasure

(Note 6)

S29GL032A

S29GL064A

sec

Chip Erase Time

64

128

Total Write Buffer Program Time (Notes 3, 5)

240

µs

Total Accelerated Effective Write Buffer Program Time

(Notes 4, 5)

Excludes system

level overhead

(Note 7)

200

S29GL032A

S29GL064A

31.5

63

Chip Program Time

sec

Notes:

1. Typical program and erase times assume the following conditions: 25°C, V = 3.0V, 10,000 cycles; checkerboard

CC

data pattern.

2. Under worst case conditions of 90°C; Worst case V , 100,000 cycles.

CC

3. Effective programming time (typ) is 15 µs (per word), 7.5 µs (per byte).

4. Effective accelerated programming time (typ) is 12.5 µs (per word), 6.3 µs (per byte).

5. Effective write buffer specification is calculated on a per-word/per-byte basis for a 16-word/32-byte write buffer

operation.

6. In the pre-programming step of the Embedded Erase algorithm, all bits are programmed to 00h before erasure.

7. System-level overhead is the time required to execute the command sequence(s) for the program command. See

Tables 25 and 26 for further information on command definitions.

80

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

TSOP Pin and BGA Package Capacitance

Parameter Symbol

Parameter Description

Test Setup

Typ

6

Max

7.5

5.0

12

Unit

pF

TSOP

BGA

C_IN

Input Capacitance

V_IN= 0

4.2

8.5

5.4

7.5

3.9

pF

TSOP

BGA

pF

C_OUT

Output Capacitance

V_OUT= 0

V_IN= 0

6.5

9

pF

TSOP

BGA

pF

C_IN2

Control Pin Capacitance

4.7

pF

Notes:

1. Sampled, not 100% tested.

2. Test conditions T = 25°C, f = 1.0 MHz.

A

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

81

A d v a n c e I n f o r m a t i o n

Physical Dimensions

TS048—48-Pin Standard Thin Small Outline Package (TSOP)

STANDARD PIN OUT (TOP VIEW)

A2

2

0.10 C

1

N

SEE DETAIL B

-A-

-B-

5

E

e

9

N

2

N

2

+1

5

A1

D1

4

C

D

SEATING

PLANE

B

A

0.08MM (0.0031")

M

C

A-B

6

S

B

b

7

SEE DETAIL A

WITH PLATING

c1

(c)

7

b1

BASE METAL

R

SECTION B-B

e/2

c

GAGE LINE

0.25MM (0.0098") BSC

0˚

-X-

X = A OR B

PARALLEL TO

SEATING PLANE

L

DETAIL A

DETAIL B

NOTES:

Package

TS 048

CONTROLLING DIMENSIONS ARE IN MILLIMETERS (MM).

(DIMENSIONING AND TOLERANCING CONFORMS TO ANSI Y14.5M-1982)

MO-142 (B) EC

Jedec

1

2

3

4

MIN

NOM MAX

1.20

Symbol

PIN 1 IDENTIFIER FOR STANDARD PIN OUT (DIE UP).

NOT APPLICABLE.

A

A1

A2

b1

b

c1

c

D

0.15

0.05

0.95

0.17

0.10

1.00

0.20

1.05

0.23

0.27

0.16

0.21

TO BE DETERMINED AT THE SEATING PLANE -C- . THE SEATING PLANE IS DEFINED AS THE PLANE OF

CONTACT THAT IS MADE WHEN THE PACKAGE LEADS ARE ALLOWED TO REST FREELY ON A FLAT

HORIZONTAL SURFACE.

0.22

5

6

DIMENSIONS D1 AND E DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE MOLD PROTUSION IS

0.15MM (.0059") PER SIDE.

19.80 20.00 20.20

18.30 18.40 18.50

11.90 12.00 12.10

DIMENSION b DOES NOT INCLUDE DAMBAR PROTUSION. ALLOWABLE DAMBAR PROTUSION SHALL BE

0.08 (0.0031") TOTAL IN EXCESS OF b DIMENSION AT MAX. MATERIAL CONDITION. MINIMUM SPACE

BETWEEN PROTRUSION AND AN ADJACENT LEAD TO BE 0.07 (0.0028").

D1

E

e

7

THESE DIMENSIONS APPLY TO THE FLAT SECTION OF THE LEAD BETWEEN 0.10MM (.0039") AND

0.25MM (0.0098") FROM THE LEAD TIP.

0.50 BASIC

L

0

R

N

0.50

0˚

0.60

3˚

0.70

5˚

8

9

LEAD COPLANARITY SHALL BE WITHIN 0.10MM (0.004") AS MEASURED FROM THE SEATING PLANE.

DIMENSION "e" IS MEASURED AT THE CENTERLINE OF THE LEADS.

0.08

0.20

48

3325 \ 16-038 10a

82

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

TS056—56-Pin Standard Thin Small Outline Package (TSOP)

2X

0.10

STANDARD PIN OUT (TOP VIEW)

2X (N/2 TIPS)

2X

0.10

2

0.10

A2

1

N

REVERSE PIN OUT (TOP VIEW)

3

SEE DETAIL B

A

B

1

N

5

E

N

2

N

2

+1

e

9

5

D1

A1

N

+1

N

2

4

2

D

0.25

2X (N/2 TIPS)

C

B

SEATING

PLANE

A

B

SEE DETAIL A

0.08MM (0.0031")

M

C

A - B S

b

6

7

WITH PLATING

c1

(c)

7

b1

BASE METAL

SECTION B-B

R

(c)

e/2

GAUGE PLANE

0.25MM (0.0098") BSC

θ°

PARALLEL TO

SEATING PLANE

X

C

L

X = A OR B

DETAIL A

DETAIL B

NOTES:

Package

Jedec

TS 056

CONTROLLING DIMENSIONS ARE IN MILLIMETERS (mm).

(DIMENSIONING AND TOLERANCING CONFORMS TO ANSI Y14.5M-1982)

MO-142 (D) EC

1

2

3

4

MIN

NOM MAX

1.20

Symbol

PIN 1 IDENTIFIER FOR REVERSE PIN OUT (DIE UP).

A

A1

A2

b1

b

c1

c

D

PIN 1 IDENTIFIER FOR REVERSE PIN OUT (DIE DOWN), INK OR LASER MARK.

0.15

0.05

0.95

0.17

0.10

1.00

0.20

1.05

0.23

0.27

0.16

0.21

TO BE DETERMINED AT THE SEATING PLANE -C- . THE SEATING PLANE IS DEFINED AS THE PLANE OF

CONTACT THAT IS MADE WHEN THE PACKAGE LEADS ARE ALLOWED TO REST FREELY ON A FLAT

HORIZONTAL SURFACE.

0.22

5

6

DIMENSIONS D1 AND E DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE MOLD PROTUSION IS

0.15mm (.0059") PER SIDE.

19.80 20.00 20.20

18.30 18.40 18.50

13.90 14.00 14.10

DIMENSION b DOES NOT INCLUDE DAMBAR PROTUSION. ALLOWABLE DAMBAR PROTUSION SHALL BE

0.08 (0.0031") TOTAL IN EXCESS OF b DIMENSION AT MAX. MATERIAL CONDITION. MINIMUM SPACE

BETWEEN PROTRUSION AND AN ADJACENT LEAD TO BE 0.07 (0.0028").

D1

E

e

7

THESE DIMENSIONS APPLY TO THE FLAT SECTION OF THE LEAD BETWEEN 0.10MM (.0039") AND

0.25MM (0.0098") FROM THE LEAD TIP.

0.50 BASIC

L

0

R

N

0.50

0˚

0.08

0.60

0.70

8˚

0.20

8

9

LEAD COPLANARITY SHALL BE WITHIN 0.10mm (0.004") AS MEASURED FROM THE SEATING PLANE.

DIMENSION "e" IS MEASURED AT THE CENTERLINE OF THE LEADS.

56

3356 \ 16-038.10c

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

83

A d v a n c e I n f o r m a t i o n

LAA064—64-Ball Fortified Ball Grid Array (BGA)

84

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005

A d v a n c e I n f o r m a t i o n

VBN048—48-Ball Fine-pitch Ball Grid Array (BGA) 10x 6 mm Package

D1

A

D

e

6

5

4

3

2

1

e

7

SE

E1

E

Ø0.50

H

G

F

E

D

C

B

A

B

A1 CORNER

+0.20

-0.50

7

6

SD

1.00

A1 ID.

Øb

Ø0.08

Ø0.15

M

C

M

C A B

0.10

0.08

C

A2

A

SEATING PLANE

C

A1

NOTES:

PACKAGE

JEDEC

VBN 048

N/A

1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994.

2. ALL DIMENSIONS ARE IN MILLIMETERS.

10.00 mm x 6.00 mm NOM

PACKAGE

3. BALL POSITION DESIGNATION PER JESD 95-1, SPP-010 (EXCEPT

AS NOTED).

SYMBOL

MIN

---

NOM

MAX

1.00

---

NOTE

4.

e REPRESENTS THE SOLDER BALL GRID PITCH.

A

A1

A2

D

---

OVERALL THICKNESS

BALL HEIGHT

5. SYMBOL "MD" IS THE BALL ROW MATRIX SIZE IN THE

"D" DIRECTION.

0.17

0.62

SYMBOL "ME" IS THE BALL COLUMN MATRIX SIZE IN THE

"E" DIRECTION.

---

0.73

BODY THICKNESS

BODY SIZE

10.00 BSC.

6.00 BSC.

5.60 BSC.

4.00 BSC.

8

N IS THE TOTAL NUMBER OF SOLDER BALLS.

E

BODY SIZE

6

7

DIMENSION "b" IS MEASURED AT THE MAXIMUM BALL

DIAMETER IN A PLANE PARALLEL TO DATUM C.

D1

E1

MD

ME

N

BALL FOOTPRINT

SD AND SE ARE MEASURED WITH RESPECT TO DATUMS

A AND B AND DEFINE THE POSITION OF THE CENTER

SOLDER BALL IN THE OUTER ROW.

ROW MATRIX SIZE D DIRECTION

ROW MATRIX SIZE E DIRECTION

TOTAL BALL COUNT

6

WHEN THERE IS AN ODD NUMBER OF SOLDER BALLS IN

THE OUTER ROW PARALLEL TO THE D OR E DIMENSION,

RESPECTIVELY, SD OR SE = 0.000.

48

φb

0.35

---

0.45

BALL DIAMETER

WHEN THERE IS AN EVEN NUMBER OF SOLDER BALLS IN

THE OUTER ROW, SD OR SE = e/2

e

0.80 BSC.

0.40 BSC.

NONE

BALL PITCH

SD / SE

SOLDER BALL PLACEMENT

DEPOPULATED SOLDER BALLS

8. NOT USED.

9. "+" INDICATES THE THEORETICAL CENTER OF DEPOPULATED

BALLS.

10 A1 CORNER TO BE IDENTIFIED BY CHAMFER, LASER OR INK

MARK, METALLIZED MARK INDENTATION OR OTHER MEANS.

3425\ 16-038.25

January 28, 2005 S29GLxxxA_00_A2

S29GLxxxA MirrorBit™ Flash Family

85

A d v a n c e I n f o r m a t i o n

Revision Summary

Revision A (October 13, 2004)

Initial Release.

Revision A1 (December 17, 2004)

Secured Silicon Sector Flash Memory Region

Updated Secured Silicon Sector address table with addresses in x8-mode.

DC Characteristics (CMOS Compatible)

I_LITre-specified over temperature.

Corrected WP#/ACC input load current footnote.

Revision A2 (January 28, 2005)

Global

Added S29GL032A information.

Colophon

The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary

industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for any use that

includes fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal

injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control,

medical life support system, missile launch control in weapon system), or (2) for any use where chance of failure is intolerable (i.e., submersible repeater and

artificial satellite). Please note that Spansion will not be liable to you and/or any third party for any claims or damages arising in connection with above-men-

tioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures

by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other

abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under

the Foreign Exchange and Foreign Trade Law of Japan, the US Export Administration Regulations or the applicable laws of any other country, the prior au-

thorization by the respective government entity will be required for export of those products.

Trademarks and Notice

The contents of this document are subject to change without notice. This document may contain information on a Spansion product under development by

Spansion LLC. Spansion LLC reserves the right to change or discontinue work on any product without notice. The information in this document is provided

as is without warranty or guarantee of any kind as to its accuracy, completeness, operability, fitness for particular purpose, merchantability, non-infringement

of third-party rights, or any other warranty, express, implied, or statutory. Spansion LLC assumes no liability for any damages of any kind arising out of the

use of the information in this document.

of Spansion LLC. Other company and product names used in this publication are for identification purposes only and may be trademarks of their respective

companies.

86

S29GLxxxA MirrorBit™ Flash Family

S29GLxxxA_00_A2 January 28, 2005


型号：	S29GL032A11FAIR30
厂家：	SPANSION
描述：	64 MEGABIT 32MEGABIT 3.0 BOLT ONLY PAGE MODE FLASH MEMORY 64兆位32MEGABIT 3.0 BOLT单页面模式闪存闪存存储内存集成电路
文件：	总88页 (文件大小：1198K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

S29GL032A11FAIR30 [SPANSION]

相关型号：

S29GL032A11FAIR31

S29GL032A11FAIR32

S29GL032A11FAIR33

S29GL032A11FAIR40

S29GL032A11FAIR41

S29GL032A11FAIR42

S29GL032A11FAIR43

S29GL032A11FFIR10

S29GL032A11FFIR11

S29GL032A11FFIR12

S29GL032A11FFIR13

S29GL032A11FFIR20