LAN9118-MT [SMSC]
HIGH PERFORMANCE SINGLE CHIP 10/100NON PCI ETHERNET CONTROLLER; 高性能的单芯片10 / 100NON PCI以太网控制器型号: | LAN9118-MT |
厂家: | SMSC CORPORATION |
描述: | HIGH PERFORMANCE SINGLE CHIP 10/100NON PCI ETHERNET CONTROLLER |
文件: | 总6页 (文件大小:213K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LAN9118
High-Performance
Single-Chip 10/100
Non-PCI Ethernet
Controller
Data Brief
PRODUCT FEATURES
—
Low-cost, low-pin count non-PCI interface for
embedded designs
Highlights
■
Optimized for high-data rate applications such as
video, high-definition video and multi-media
applications
■
Architected for Low Power
—
—
—
—
—
Numerous power management modes
Wake on LAN
Magic packet wakeup
■
■
Efficient architecture with low CPU overhead; easily
Wakeup indicator event signal
Link Status Change
interfaces to most Embedded CPU’s
Reduces system and design costs
■
Single chip Ethernet controller
—
—
—
—
—
—
—
—
—
—
Fully compliant with IEEE 802.3/802.3u standards
Integrated Ethernet MAC and PHY
10BASE-T and 100BASE-TX support
Full- and Half-duplex support
Target Applications
■
■
■
■
■
■
■
■
■
■
Cable, satellite, and IP set-top boxes
Digital video recorders
High definition televisions
Digital music jukeboxes
Digital media clients/servers
DVD recorders/players
Full-duplex flow control
Backpressure for half-duplex flow control
Preamble generation and removal
Automatic 32-bit CRC generation and checking
Automatic payload padding and pad removal
Loop-back modes
■
Flexible address filtering modes
Home gateways
—
—
—
—
—
—
—
One 48-bit perfect address
64 hash-filtered multicast addresses
Pass all multicast
Video-over IP Solutions
Wireless routers & access points
IP PBX & video phones
Promiscuous mode
Inverse filtering
Pass all incoming with status report
Disable reception of broadcast packets
Key Benefits
■
■
Integrated Ethernet PHY
—
—
Auto-negotiation
Automatic polarity detection and correction
■
Supports high and ultra-high performance
applications
High-Performance host bus interface
—
Highest performing non-PCI Ethernet controller in the
market
—
—
—
Simple, SRAM-like interface
32/16-bit data bus
—
—
32-bit interface with 45ns bus cycle times
Burst-mode read support
Large, 16Kbyte FIFO memory that can be allocated to
RX or TX functions
■
Eliminates dropped packets
—
One configurable Host interrupt
—
—
Internal SRAM can store over 200 packets
Supports automatic or host-triggered PAUSE and back-
pressure flow control
■
Miscellaneous features
—
—
—
—
—
Low profile 100-pin TQFP package
Integral 1.8V regulator
General Purpose Timer
Support for optional EEPROM
Support for 3 status LEDs multiplexed with
Programmable GPIO signals
■
■
Minimizes CPU overhead
—
—
Supports Slave-DMA
Interrupt Pin with Programmable Hold-off timer
Reduces system cost and increases design flexibility
—
SRAM-like interface easily interfaces to most
Embedded CPU’s or SoC’s
■
■
3.3V Power Supply with 5V tolerant I/O
0 to 70°C
SMSC LAN9118
PRODUCT PREVIEW
Revision 0.5 (09-09-04)
High-Performance Single-Chip 10/100 Non-PCI Ethernet Controller
■
ORDERING INFORMATION:
LAN9118-MD FOR 100 PIN, TQFP PACKAGE
LAN9118-MT FOR 100 PIN, LEAD-FREE TQFP PACKAGE
80 Arkay Drive
Hauppauge, NY 11788
(631) 435-6000
FAX (631) 273-3123
Copyright © SMSC 2004. All rights reserved.
Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete
information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no
responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without
notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does
not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC
or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard
Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors
known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request.
SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause
or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further
testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale
Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered trademark of Standard Microsystems
Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders.
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND
ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE.
IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES;
OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON
CONTRACT; TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR
NOT ANY REMEDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Revision 0.5 (09-09-04)
2
SMSC LAN9118
PRODUCT PREVIEW
High-Performance Single-Chip 10/100 Non-PCI Ethernet Controller
General Description
The LAN9118 is a full-featured, single-chip 10/100 Ethernet controller designed for embedded
applications where performance, flexibility, ease of integration and low cost are required. The LAN9118
has been specifically architected to provide the highest performance possible for any given
architecture. The LAN9118 is fully IEEE 802.3 10BASE-T and 802.3u 100BASE-TX compliant.
The LAN9118 includes an integrated Ethernet MAC and PHY with a high-performance SRAM-like slave
interface. The simple, yet highly functional host bus interface provides a glue-less connection to most
common 16 and 32-bit microprocessors and microcontrollers. LAN9118 includes large transmit and
receive data FIFO’s with a high-speed host bus interface to accommodate high bandwidth, high latency
applications. In addition, the LAN9118 memory buffer architecture allows the most efficient use of
memory resources by optimizing packet granularity.
Applications
The LAN9118 is well suited for many high-performance embedded applications, including:
■
■
■
■
Digital television
Video record/playback systems
Set-top boxes
Printers and scanners
The LAN9118 supports numerous power management and wakeup features. The LAN9118 can be
placed in a reduced power mode and can be programmed to issue an external wake signal via several
methods, including Magic Packet, Wake on LAN and Link Status Change. This signal is ideal for
triggering system power-up using remote Ethernet wakeup events. The device can be removed from
the low power state via a host processor command.
The LAN9118 also supports features which reduce or eliminate packet loss. Its internal 16k SRAM can
hold over 200 received packets. If the receive FIFO gets too full, the LAN9118 can automatically
generate flow control packets to the remote node, or assert back-pressure on the remote node by
generating a network collision. The host controller can also.
The diagram shown in Figure 1, "System Block Diagram utilizing the SMSC LAN9118", describes a
typical system configuration of the LAN9118 in a typical embedded environment.
The LAN9118 is designed to be general purpose Ethernet controller that is platform independent. The
LAN9118 consists of four major functional blocks. The four blocks are:
1. 10/100 Ethernet PHY
2. 10/100 Ethernet MAC
3. RX/TX FIFO’s
4. Slave Interface Module
SMSC LAN9118
3
Revision 0.5 (09-09-04)
PRODUCT PREVIEW
High-Performance Single-Chip 10/100 Non-PCI Ethernet Controller
Block Diagrams
System Memory
System Memory
System
Peripherals
Magnetics
Ethernet
Embedded
Microprocessor/
Microcontroller
LAN9118
LEDS/GPIO
25MHz
XTAL
EEPROM
(Optional)
Figure 1 System Block Diagram utilizing the SMSC LAN9118
Revision 0.5 (09-09-04)
4
SMSC LAN9118
PRODUCT PREVIEW
High-Performance Single-Chip 10/100 Non-PCI Ethernet Controller
25MHz
+3.3V
EEPROM
(Optional)
EEPROM
Controller
3.3V to 1.8V
PLL
Regulator
2kBto 14kB
Configurable TX FIFO
PIOController
SRAMI/F
TX Status FIFO
RX Status FIFO
10/100
10/100
Ethernet
PHY
LAN
Host Bus Interface
(HBI)
Ethernet
MAC
Interrupt
IRQ
Controller
MIL - RX Elastic
Buffer - 128bytes
FIFO_SEL
2kBto 14kB
Configurable RXFIFO
MIL - TX Elastic
Buffer - 2K
GP Timer
Figure 2 LAN9118 Internal Block Diagram
SMSC LAN9118
5
Revision 0.5 (09-09-04)
PRODUCT PREVIEW
High-Performance Single-Chip 10/100 Non-PCI Ethernet Controller
Package Outline
Figure 3 100 Pin TQFP Package Outline
Table 1 100 Pin TQFP Package Parameters
MAX REMARKS
MIN
NOMINAL
A
~
~
1.60
Overall Package Height
A1
A2
D
D1
E
E1
H
L
L1
e
θ
W
R1
R2
ccc
0.05
1.35
15.80
13.90
15.80
13.90
0.09
0.45
~
~
0.15
1.45
16.20
14.10
16.20
14.10
0.20
0.75
~
Standoff
Body Thickness
X Span
~
~
~
X body Size
~
Y Span
Y body Size
Lead Frame Thickness
Lead Foot Length
Lead Length
~
~
0.60
1.00
0.50 Basic
Lead Pitch
Lead Foot Angle
Lead Width
0o
0.17
0.08
0.08
~
~
0.22
~
~
~
7o
0.27
~
0.20
0.08
Lead Shoulder Radius
Lead Foot Radius
Coplanarity
Notes:
1
Controlling Unit: millimeter.
Tolerance on the true position of the leads is ± 0.04 mm maximum.
Package body dimensions D1 and E1 do not include the mold protrusion. Maximum mold protrusion is 0.25 mm.
Dimension for foot length L measured at the gauge plane 0.25 mm above the seating plane.
Details of pin 1 identifier are optional but must be located within the zone indicated.
2
3
4
5
Revision 0.5 (09-09-04)
6
SMSC LAN9118
PRODUCT PREVIEW
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明