SM6844015MAB5S [SMI]
Medium Pressure Sensor Analog Output;型号: | SM6844015MAB5S |
厂家: | Silicon Microstructures, Inc. |
描述: | Medium Pressure Sensor Analog Output |
文件: | 总6页 (文件大小:538K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Medium Pressure Sensor
Analog Output
SM6844-015-A-B-5-S
FEATURES
•
•
•
•
•
•
•
•
•
Analog pressure calibrated and temperature compensated output
Amplified analog output
Compensated temperature range: 0 to 85oC
Absolute pressure configuration
Insensitive to mounting orientation
Robust JEDEC SOIC-16 package for automated assembly
Manufactured according to ISO9001 and ISO/TS 16949 standards
RoHS & REACH compliant
Pressure range: 15 PSIA (103 kPa)
DESCRIPTION
Combining the pressure sensor with a signal-conditioning ASIC in a
single package simplifies the use of advanced silicon micro-machined
pressure sensors. The pressure sensor can be mounted directly on a
standard printed circuit board and a high level, calibrated pressure
signal can be acquired from the analog output. This eliminates the need
The SM6844 Series is an absolute pressure MEMS sensor family offering
state-of-the-art pressure transducer technology and CMOS mixed signal
processing technology to produce an analog, fully conditioned, pressure
and temperature compensated sensor in JEDEC standard SOIC-16
package with a single horizontal porting option.
for additional circuitry, such as a compensation network or
microcontroller containing a custom correction algorithm.
The SM6844 is shipped in sticks or tape & reel.
Medical
Industrial
Consumer
Sleep Apnea
CPAP
Airflow Measurement
Sports Equipment
Appliances
Pneumatic Gauges
Pressure Switches
Safety Cabinets
Ventilators
Gas Flow Instrumentation
Air Flow Monitors
Negative Pressure Wound Therapy
Life Sciences
Gas Flow Instrumentation
Silicon Microstructures, Inc. 2001-2016. All rights reserved
+1-(408) 577-0100 | sales@si-micro.com I www.si-micro.com
DOC # 40DS6844.01
Page 1
www.si-micro.com
SM6844-015-A-B-5-S
ABSOLUTE MAXIMUM RATINGS
All parameters are specified at Vdd = 5 V DC supply voltage at 25oC, unless otherwise noted.
No.
Characteristic
Supply Voltage
Symbol Minimum Typical Maximum
Units
V
1
2
3
4
VDD
IVDD
TOP
0.0
0.0
-40
-40
6.0
4.0
Supply Current
2.0
-
mA
°C
Operating Temperature(a)
Storage Temperature(a)
+125
+125
TSTG
°C
Notes:
a. Tested on a sample basis.
b. Clean, dry gas compatible with wetted materials. Wetted materials include Pyrex glass, silicon, alumina ceramic, epoxy, RTV, gold,
aluminum, and nickel.
Proof Pressure
Burst Pressure
(a)
(PBURST)
No.
Product Number
Operating Pressure
(a)
(PPROOF
)
5
SM6844-015-A-B-5-S
0 to 15 PSIA
±45 PSI
±75 PSI
Notes:
a. Tested on a sample basis.
OPERATING CHARACTERISTICS TABLE
All parameters are specified at Vdd = 5 V DC supply voltage at 25oC, unless otherwise noted.
Single-Ended
No.
6
Characteristic
Supply Voltage
Symbol Minimum Typical
Maximum
Units
VDD
FSP
4.75
5
4
5.25
V FS
V
7
Full Scale Span
8
Zero Offset Voltage
Compensated Temperature Range
Accuracy (c)
VZERO
TCOMP
ACC
0.5
V
9
-0
-1
+85
+1
oC
10
%FS
Notes:
c. The accuracy specification applies over all operating conditions. This specification includes the combination of linearity,
repeatability, and hysteresis errors over pressure & temperature.
Silicon Microstructures, Inc. 2001-2016. All rights reserved
+1-(408) 577-0100 | sales@si-micro.com I www.si-micro.com
DOC # 40DS6844.01
Page 2
www.si-micro.com
SM6844-015-A-B-5-S
SOIC-16 (B) Single-Horizontal Package Dimensions
Notes:
•
•
•
•
• All dimensions in units of [mm].
• Moisture Sensitivity Level (MSL): Level 3.
• Wetted materials: Silicon, glass, copper, silicone, epoxy, mold compound.
• Tolerance on all dimensions ±0.13 mm unless otherwise specified.
Part & Lot Number Identification
Silicon Microstructures, Inc. 2001-2016. All rights reserved
+1-(408) 577-0100 | sales@si-micro.com I www.si-micro.com
DOC # 40DS6844.01
Page 3
www.si-micro.com
SM6844-015-A-B-5-S
SM6844 + Family Applications Circuit
Package Labeling
Pin No.
Pin Function
1
Vout (Amplified Analog Output)
2
3
NC
VDD
NC
NC
NC
NC
NC
NC
NC
NC
GND
NC
NC
NC
NC
4
5
6
7
8
9
10
11
12
13
14
15
16
NOTES:
Do not connect to NC pins
•
Silicon Microstructures, Inc. 2001-2016. All rights reserved
+1-(408) 577-0100 | sales@si-micro.com I www.si-micro.com
Package Pin-Out
DOC # 40DS6844.01
Page 4
www.si-micro.com
SM6844-015-A-B-5-S
Ordering Information
Part
Negative
Positive
Marking Pressure Range Pressure Range
Tube
Configuration
Shipping
Method
Order Code
Pressure Type
Sticks or
Tape & Reel
SM6844-015-A-B-5-T
SM6844
0 PSI
15 PSI
Absolute
Single Horizontal
Part Number Legend
QUALIFICATION STANDARDS
REACH Compliant
RoHS Compliant
PFOS/PFOA Compliant
For qualification specifications, please contact Sales at sales@si-micro.com
Silicon Microstructures, Inc. 2001-2016. All rights reserved
+1-(408) 577-0100 | sales@si-micro.com I www.si-micro.com
DOC # 40DS6844.01
Page 5
www.si-micro.com
SM6844-015-A-B-5-S
Silicon Microstructures Warranty and Disclaimer:
Silicon Microstructures, Inc. reserves the right to make changes without further notice to any products herein and to amend the
contents of this data sheet at any time and at its sole discretion.
Information in this document is provided solely to enable software and system implementers to use Silicon Microstructures, Inc.
products and/or services. No express or implied copyright licenses are granted hereunder to design or fabricate any silicon-
based microstructures based on the information in this document.
Silicon Microstructures, Inc. makes no warranty, representation, or guarantee regarding the suitability of its products for any
particular purpose, nor does Silicon Microstructures, Inc. assume any liability arising out of the application or use of any product
or silicon-based microstructure, and specifically disclaims any and all liability, including without limitation consequential or
incidental damages. “Typical” parameters which may be provided in Silicon Microstructure’s data sheets and/or specifications
can and do vary in different applications and actual performance may vary over time. All operating parameters, including
“Typicals”, must be validated for each customer application by customer’s technical experts. Silicon Microstructures, Inc. does
not convey any license under its patent rights nor the rights of others. Silicon Microstructures, Inc. makes no representation that
the circuits are free of patent infringement. Silicon Microstructures, Inc. products are not designed, intended, or authorized for
use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain
life, or for any other application in which the failure of the Silicon Microstructures, Inc. product could create a situation where
personal injury or death may occur. Should Buyer purchase or use Silicon Microstructures, Inc. products for any such unintended
or unauthorized application, Buyer shall indemnify and hold Silicon Microstructures, Inc. and its officers, employees, subsidiaries,
affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that Silicon Microstructures, Inc. was negligent regarding the design or manufacture of the part.
Silicon Microstructures, Inc. warrants goods of its manufacture as being free of defective materials and faulty workmanship.
Silicon Microstructures, Inc. standard product warranty applies unless agreed to otherwise by Silicon Microstructures, Inc. in
writing; please refer to your order acknowledgement or contact Silicon Microstructures, Inc. directly for specific warranty
details. If warranted goods are returned to Silicon Microstructures, Inc. during the period of coverage, Silicon Microstructures,
Inc. will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is
in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event
shall Silicon Microstructures, Inc. be liable for consequential, special, or indirect damages.
While Silicon Microstructures, Inc. provides application assistance personally, through its literature and the Silicon
Microstructures, Inc. website, it is up to the customer to determine the suitability of the product for its specific application. The
information supplied by Silicon Microstructures, Inc. is believed to be accurate and reliable as of this printing. However, Silicon
Microstructures, Inc. assumes no responsibility for its use. Silicon Microstructures, Inc. assumes no responsibility for any
inaccuracies and/or errors in this publication and reserves the right to make changes without further notice to any products or
specifications herein
Silicon Microstructures, Inc.TM and the Silicon Microstructures, Inc. logo are trademarks of Silicon Microstructures, Inc. All other
service or product names are the property of their respective owners.
© Silicon Microstructures, Inc. 2001-2016. All rights reserved.
Silicon Microstructures, Inc. 2001-2016. All rights reserved
+1-(408) 577-0100 | sales@si-micro.com I www.si-micro.com
DOC # 40DS6844.01
Page 6
相关型号:
©2020 ICPDF网 联系我们和版权申明