MAX-403-0512 [SLPOWER]

400, 500 WATTS MULTIPLE OUTPUT; 400 ， 500 WATTS多输出


型号：	MAX-403-0512
厂家：	SL Power Electronics
描述：	400, 500 WATTS MULTIPLE OUTPUT 400 ， 500 WATTS多输出输出元件
文件：	总2页 (文件大小：97K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

4 0 0 , 5 0 0 WATTS

MULTIP LE OUTP UT

MAX-400

MAX-500

MTC-500

Option F

Option C

STANDARD MAX SERIES

Option V

MODEL

PWR OUTPUT #1

OUTPUT #2

OUTPUT #3

OUTPUT #4

MAX-403-0512

MAX-503-0512

MAX-504-1205

MAX-504-1212

MAX-504-1224

MAX-504-1252

400

500

+5V @ 70A

+5V @ 80A

+12V @ 10/16A pk

-12V @ 6A

-12V @ 10A

-5.2V @ 10A

Featuring:

5.2V @ 2A

12V @ 2A

+24V @ 2A

12V @ 2A

• Over 3.5 watts/in³power density

• 80% overall efficiency

• VMEbus and Multibus II system

compatibility

• Meets international safety agency

requirements

• All outputs regulated ±1%

• High peak currents for motor

starting

TELECOM MTC SERIES

MODEL

PWR

OUTPUT #1

OUTPUT #2

OUTPUT #3

MTC-503-0512

MTC-503-0515

500

+5V @ 70A

+12V @ 10A

+15V @ 8A

-12V @ 10A

-15V @ 8A

• System air or self-cooling options

• AC automatic line selection option

High-current auxiliary outputs provide

regulation characteristics for proper

operation of line drivers, network inter-

faces, and RS232-type outputs. And,

you can upgrade power output by 25%

without redesigning for a larger power

supply.

VMEbus and Multibus compatibility is

only one feature of this series. You’ll find

switchers to power up to 80 Amps of

logic and four hard disk drives — with

up to 16 Amps peak current to meet

peripheral startup needs.

You’ll find the outputs you need for

ISDN, LAN, T1 applications and for

standard voice and data networks.

Condor D.C. Power Supplies, Inc., A subsidiary of SL Industries, Inc. 805-486-4565 • (800) 235-5929 Fax: (805) 487-8911 http://www.condorpower.com

4 0 0 , 5 0 0 WATTS

1 1 .5 ” x 5 ” x 2 .5 ”

MAX-4 0 0 , 5 0 0 MTC-5 0 0

MAX, MTC-500

MAX, MTC-500 with Option F

4.5 lbs - 2.0 kgs

5.2 lbs - 2.4 kgs

Dimensions:

Inches

Millimeters

SPECIFICATIONS: ALL MODELS

INPUT

AC Input: 90-132 Vac/180-264 Vac, 47 to 63 Hz. User selectable. See option “A” for automatic

line selection. Internally fused for 12 A.

Inrush: Cold start AC current is less than 80 A at 115 Vac and 20 A at 230 Vac. Limited by

thermistor.

Holdup Time: 16 ms minimum after removal of power, at nominal line, full load.

Efficiency: 80% typical.

Option “G”, DC Power Good: Provides a TTL “1” open collector when output #1 is above 4.6

V nominal. Not available if option “P” is selected.

Option “P”, AC Power Fail: Provides TTL “0” 5 ms before output voltage goes out of

regulation band upon loss of AC power. VMEbus compatible, provides 48 mA sink current

capability. Not available if option “G” is selected.

Option “V”, Fan/Cover Assembly: Low profile, end venting cover with integral ball-bearing

fan.

Brownout Protection: Holds regulation to 85 Vac or 170 Vac.

OUTPUT

Consult factory for other available options.

Adjustability: User adjustable ±5% minimum.

Line & Load Reg: ±1% over AC input range and 0 to 100% load change. Output #1 requires

minimum load of 10%.

Ripple & Noise: Less than 1% p-p or 100 mV, whichever is greater.

Remote Sense (Output #1): Compensates for 250 mV total line drop. Open sense lead

protection.

AC INPUT

FUNCTION

115 VAC

230 VAC

CONNECTORS

Input Select

Short

Line

Open

0.250 Male Fastons

TB1- (L)

TB1- (N)

Line 1

Line 2

Barrier strip

#6-32 screws

3/8 centers.

Temperature Coefficient: 0.02% per degree C.

Neutral

Stability: 0.1% over 8 hours after 30 minutes warm-up.

Transient Response (Output #1): Output voltage returns to within 1% in less than 500 µs for

a 50% load change. Peak transient does not exceed 5%.

Overload Protection: All outputs are protected against overload and short circuit. Automatic

recovery upon removal of fault.

TB1- (

)

Safety Ground

DC OUTPUT

FUNCTION

LOCATION

NOTES

CONNECTOR

Overvoltage Protection (Output #1): Protects load against power supply induced overvoltage.

Trip point is factory set so that output voltage cannot exceed 136% of nominal.

Remote Inhibit: Contact closure to the negative sense line drops output power to nominal

zero.

Output #1

Terminal marked +V Main Output

Terminal marked COM Rtn (Common)

TB2-3

Bus bars

#1/4-20 screws

Output #2

Output #3

TB2-4

TB2-5

TB2-4

TB2-1

TB2-2

Rtn (Common)

Reverse Voltage: Protected against reverse voltage up to supply current rating.

Barrier Strip

#6-32 screws

3.8” centers

ENVIRONMENTAL

Rtn (Common)

Thermal Protection: Shuts down power supply if overheated. Automatic recovery.

Temperature Range: 0° to 50°C at full ratings. Derate to half power at 70°C.

Safety Agencies: Most models are approved to UL1950; CSA 22.2 #234; IEC 950 and TÜV

EN60950, Class 1 SELV., CE 72/23/EEC/93/68EEC (low voltage directive).

Conducted RFI: Meets FCC Part 15, Subpart J, Class A; EN55022 Class B; CISPR 22 Class B.

Cooling: 30 CFM required to achieve full ratings.

Output #4*

(+)

(–)

(If provided)

*Rtn connected to common only if output is polarized in product selection chart

STATUS AND CONTROL

Output Isolation: Isolated from ground 50 Vdc.

FUNCTION

LOCATION

NOTES

CONNECTOR

Remote Sense

J1-1 (+S)

Output #1 Sense

Output #1 Sense Rtn

Reference to J1-2

AMP MTA type

#640456-4 pin

header (locking)

OPTIONS:

J1-2 (-S)

J1-3 (PF)

Option “A”, AC Auto-Range: Automatically selects proper AC line voltage range to enable

power operation at either 115 or 230 Vac without user intervention.

Option “C”, Cover: Limits contact with power supply interior.

Option “F”, Fan/Cover Assembly: Cover with integral ball-bearing fan provides proper cooling

to achieve full ratings at 50°C ambient temperature.

AC Power Fail or

DC Power Good*

Inhibit

J1-4(1H)

Short to J1-2

*Optional function

Condor D.C. Power Supplies, Inc., A subsidiary of SL Industries, Inc. 805-486-4565 • (800) 235-5929 Fax: (805) 487-8911 http://www.condorpower.com

相关型号：