CINT1150A4806K01 [SLPOWER]

The CINT1150 family is the latest offering in high density single output open-frame AC/DC power supplies.; 该CINT1150系列是最新推出的高密度单输出开架式AC / DC电源。


型号：	CINT1150A4806K01
厂家：	SL Power Electronics
描述：	The CINT1150 family is the latest offering in high density single output open-frame AC/DC power supplies. 该CINT1150系列是最新推出的高密度单输出开架式AC / DC电源。
文件：	总8页 (文件大小：636K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CINT1150

150W Single Output

Industrial Series

Features

2” x 4” x 1.3” Package

For 1U Applications

150W w/air, 100W convection cooled

Universal Input 90-264 VAC

Power Fail/Output Good Signal

Approved to CSA/EN/IEC/UL60950, 2nd Edition

3 Year Warranty

RoHS Compliant

Description

The CINT1150 family is the latest offering in high density single output open-frame AC/DC power supplies. Approved to

EN/IEC/UL60950-1, 2nd edition, the CINT1150 family is ideal for lighting, industrial printers, gaming equipment, and many

other applications where power density and cost are critical. The CINT1150 operates at universal input range of 90 to

264Vac and wide temperature range -10°C to +70°C, delivering full rated output power up to +50°C. In addition, these

models feature Power Fail and DC OK signals.

Model Selection

Model

Number

Output Current

Ripple &

Noise**

Total

Regulation

OVP

Threshold***

Volts

w/200LFM air

Convection*

CINT1150A1206K01

CINT1150A2406K01

CINT1150A4806K01

CINT1150A5606K01

12V

12.5A

6.25A

3.13A

2.68A

8.33A

0.5%RMS, 1.2% pk-pk

0.5%RMS, 1.0% pk-pk

5%

14.0  1.1V

28.0 ± 2.5V

55.0 ± 4.0V

<59.9V

24V

48V

56V

4.17A

2.08A

1.79A

Notes:

Maximum output power is 95 Watts for input voltage of 90-105VAC at 50°C convection. For input voltage of 105Vac or more, the total power is

100 Watts at 50°C convection.

** Measured with noise probe directly across output terminals, and load terminated with 0.1μF ceramic and 10μF low ESR capacitors.

General Specifications

Less than 2 sec. @115Vac (inversely

proportional to input voltage and thermistor

temperature)

100-240Vac, ±10%, 47-63Hz, 1

AC Input

Input Current

Inrush Current

Input Fuses

Turn On Time

Hold-up Time

Signals

120–370Vdc

115Vac: 2A, 230Vac: 1A

>12mS at full load, 120Vac

AC Power Fail, DC OK

Hiccup Mode

264Vac, cold start: will not exceed 50A

Overload

Protection

F1, F2: 4A, 250Vac fuses provided on all

models

www.slpower.com

CINT1150 REV 2.6, 12-NOV-12

CINT1150

150W Single Output

Industrial Series

General Specifications (continued)

Earth Leakage

<750μA@264Vac, 60Hz, NC

Current

Short Circuit

Protection

Provided - no damage will occur if the output

is shorted. Hiccup Mode

OVP firing reduces output voltage to <50%

of nominal in <50mS. See chart for trip

range.

Overvoltage

Protection

88% typical at 115Vac

Efficiency

150W continuous with 200 lfm airflow, 100W

convection cooled – See chart for specific

voltage model ratings.

PFC: Variable 30-400kHz.

Main Converter: Variable 35-180kHz, 65-

70kHz at full load.

Output Power

Switching Frequency

Isolation

Input-Output: 4000Vac

Input-Ground: 1800Vac

Output-Ground: 500Vac

Transient

Response

50% load step. i/t: <0.2A/μS

Max Volt Deviation = 3%

Operating

Temperature

See chart

-10°C to +70°C

Ripple and Noise

Output Voltage

Temperature

Derating

Derate output power linearly above 50°C to

50% at 70°C

See chart

Voltage

Adjustability

+/-5% from nominal

Not required

-40°C to +85°C

Storage Temperature

Altitude

Operating: -500 to 10,000 ft

Non-operating: -500 to 40,000 ft.

Minimum Load

+/- 5%. See chart

5% to 95%, non-condensing

Total Regulation

Relative Humidity

Operating: 0.003g/Hz, 1.5grms overall, 3

axes, 10 min/axis

Non-Operating: 0.026g2/Hz, 5.0grms overall,

3 axes, 1 hr/axis

Operating: Half-sine, 20gpk, 10ms, 3 axes, 6

shocks total

Non-Operating: Half-sine, 40 gpk, 10 ms, 3

axes, 6 shocks total

Vibration

Shock

W: 2.0” x L: 4.0” x H: 1.3”

183g

EN/CSA/UL/IEC60950-1, 2nd Edition

Dimensions

Weight

Safety Standards

MTBF

640,000 hours at 100W convection,

1,500,000 hours at 150W with 200LFM air

Auxiliary Signals

Goes LOW with 5 mS warning before loss

of output power due to AC failure

During normal operations, stays HIGH.

AC Power Fail:

Power Fail:

DC OK:

Open collector logic signal goes and stays HIGH

100mS to 500mS after main output reaches

regulation.

www.slpower.com

CINT1150 REV 2.6, 12-NOV-12

CINT1150

150W Single Output

Industrial Series

EMI/EMC Compliance

EN55011/22 Class B, FCC Part 15, Subpart B, Class B

Conducted Emissions

Radiated Emissions

EN55011/22 Class A, FCC Part 15, Subpart B, Class A w/6db margin

EN61000-4-2, Criteria A, 6kV Contact Discharge, 8kV air discharge

EN61000-4-3, 3V/m. Criteria A

Static Discharge Immunity

Radiated RF Immunity

EFT/Burst Immunity

EN61000-4-4, 2kV/5kHz, Criteria A

EN61000-4-5, 1kV differential, 2kV common-mode, Criteria A

EN61000-4-6, 3Vrms, Criteria A

Line Surge Immunity

Conducted RF Immunity

Power Frequency Magnetic Field Immunity

Voltage Dip Immunity

Line Harmonic Emissions

Flicker Test

EN61000-4-8, 3A/m, Criteria A

EN61000-4-11, 0% Vin, 0.5cycle; 40% Vin, 5 cycles; 70% Vin, 25 cycles;

Criteria A

EN61000-3-2, Class A, B, C, & D

EN61000-3-3, Complies (dmax<6%)

Mechanical Drawing

www.slpower.com

CINT1150 REV 2.6, 12-NOV-12

CINT1150

150W Single Output

Industrial Series

Connector Information

Input Connector

J100

Ground

J101

DC Output Connector

J200

Signal Connector

J300

PIN 1) AC LINE

PIN 2) EMPTY

PIN 3) AC NEUTRAL

PIN 1) +Vout PIN 4) -Vout

PIN 2) +Vout PIN 5) -Vout

PIN 3) +Vout PIN 6) -Vout

PIN 1) PF/DC OK

PIN 2) Common

0.187” FASTON TAB

Mating Connector:

Molex 09-50-3031

Pins= 08-52-0072

Mating Connector:

AMP 640250-6

Pins = 640252-1

Mating Connector:

Molex 1375820-2

Pins = 1375819

Mating Connector:

Molex 01-90020009

Power Fail/DC OK Signals – J300

J300–Pin 1

J300 – Pin 2

AC POWER FAIL SIGNAL

DC OK SIGNAL

Isolation Specifications

Parameter

Conditions/Description

Min

Nom

Max

Units

Input/Ground

Input/Output

Output/Ground

Basic

Reinforced

n/a

Insulation Safety Rating

Input/Ground

Input/Output

Output/Ground

1800

4000

500

Vac

Electric Strength Test Voltage

www.slpower.com

CINT1150 REV 2.6, 12-NOV-12

CINT1150

150W Single Output

Industrial Series

Input Specifications

All specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted.

Parameter

Conditions/Description

Min

Nom

Max

Units

Input Voltage

Turn-On Input Voltage

Turn-Off Input Voltage

Input Frequency

115/230

82.7

67.0

50/60

264

Vac

Ramping up

Ramping down

Inrush Current Limitation

Power Factor

264Vac, cold start

Vi _nom,Io _nom

0.9

Vi _nom,Io _nom

CINT1150A1206K01

CINT1150A2406K01

CINT1150A4806K01

CINT1150A5606K01

Efficiency

88%

Protection

All specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted

Parameter

Input Fuse

Conditions/Description

Not user accessible

Min

Nom

Max

Units

Input Transient Protection

2KV(CM) and 1KV(DM) surge

KV (CM)

No-load

Short Circuit

Overload

Hiccup Mode

Output

Overvoltage Protection

Latch style

See Models chart for trip ranges

Over temperature Protection

Automatic power shutdown at TC =155°C

Characteristic Curves

Output vs. Temperature

100W convection cooled and 150W continuous with 200 LFM airflow, Derating output power to 50% at 70C.

www.slpower.com

CINT1150 REV 2.6, 12-NOV-12

CINT1150

150W Single Output

Industrial Series

Efficiency vs. Loading

The high efficiency is achieved by using LLC technology, PFC topology minimizing switching losses. Synchronous SCHOTTKY or ultra-fast diode is

used as rectifier in CINT1150 family because of high output voltage level.

Ripple & Noise

To verify that the output ripple and noise does not exceed the level specified in the product specification. Measured using a scope probe socket with

0.1uF ceramic and a 10uF electrolytic capacitor connected in parallel across it, 20MHz BW.

24V OUT, NO LOAD, 90VAC, 60HZ

24V OUT, FULL LOAD, 90VAC, 60HZ

24V OUT, NO LOAD, 264VAC, 50HZ

CINT1150 REV 2.6, 12-NOV-12

24V OUT, FULL LOAD, 264VAC, 50HZ

www.slpower.com

CINT1150

150W Single Output

Industrial Series

Output Transient Response

50% load step within the regulation limits of minimum and maximum load, dI/dt< 0.2A/μSec. Recovery time not specified as there is no laps in regulation

with a 50% Load Step. Maximum voltage deviation is 3%, This test is performed on the MAIN OUTPUT ONLY.

24V OUT, 120VAC, 25% TO 75% LOAD STEP

24V OUT, 240VAC, 25% TO 75% LOAD STEP

Output Overload Characteristic

Supply shall protect itself against Overload conditions. The Power Supply shall recover from Overload Conditions without operator intervention.

24V OUT, 90VAC

24V OUT, 264VAC

Short Circuit Protection

Supply shall protect itself against Short Circuit conditions. No damage will occur if the output is shorted..

24V OUT, 90VAC

24V OUT, 264VAC

www.slpower.com

CINT1150 REV 2.6, 12-NOV-12

CINT1150

150W Single Output

Industrial Series

Overvoltage Protection

OVP firing reduces output voltage to <50% of nominal in <50ms. See models chart for trip ranges.

24V OUT, NO LOAD

24V OUT, FULL LOAD

Turn On Time

90VAC, FULL LOAD

264VAC, FULL LOAD

Hold Up Time

120VAC, FULL LOAD

consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.

www.slpower.com

CINT1150 REV 2.6, 12-NOV-12

相关型号：