SMP1320-099 [SKYWORKS]
PIN Diode Chips Supplied on Film Frame; PIN二极管芯片提供对电影相框型号: | SMP1320-099 |
厂家: | SKYWORKS SOLUTIONS INC. |
描述: | PIN Diode Chips Supplied on Film Frame |
文件: | 总5页 (文件大小:244K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
PIN Diode Chips Supplied on Film Frame
Features
●
Designed for high-performance switch and
attenuator applications
●
Preferred device for module applications
●
PIN diodes supplied 100% tested, sawn, mounted on film frame
●
Low cost
●
Available lead (Pb)-free, RoHS-compliant, and Green
Description
The SMP series of PIN diodes is designed for high-volume switch
applications from 10 MHz to beyond 2 GHz. The low current, low
capacitance performance of these diodes makes the SMP series
particularly suited for battery-operated circuits, power amplifier
modules, VCO, T/R switches and other applications. The
SMP1302-099 and SMP1304-099 parts are designed as low-
distortion attenuators used in TV distribution and cellular base
station applications.
Absolute Maximum Ratings
Characteristic
Value
50 V
Reverse voltage (V )
R
Power dissipation @ 25 °C
at the base of the chip
250 mW
Storage temperature
Operating temperature
ESD human body model
-65 °C to +150 °C
-65 °C to +150 °C
Class 1 B
Skyworks Green products are lead (Pb)-free, RoHS
(Restriction of Hazardous Substances)-compliant,
conform to the EIA/EICTA/JEITA Joint Industry Guide
(JIG) Level A guidelines, and are free from antimony
trioxide and brominated flame retardants.
NEW
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200140 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 30, 2006
1
DATA SHEET • PIN DIODE CHIPS SUPPLIED ON FILM FRAME
Electrical Specifications at 25 °C
Typ. C
Max. C
Max. R
I = 1 mA
F
Max. R
S
I = 10 mA
F
Typical Carrier
Lifetime
J
J
S
Part
Number
Voltage
Rating
(V)
V
= 0 V
V
= 10 V
Typ. V
R
R
F
(1)
F = 1 MHz
(pF)
F = 1 MHz
(pF)
@ I = 10 mA
F = 100 MHz
F = 100 MHz
I = 10 mA
(nsec)
F
F
(mV)
(Ω)
(Ω)
Switching Applications
SMP1320-099
50
50
0.23
1.1
0.175
0.85
0.15
0.15
850
825
880
825
2 Typ.
1.5
0.9
0.45 Typ.
1.2
400
400
SMP1322-099
SMP1340-099
50
0.2
1.7 Typ.
15
100
SMP1353-099
100
0.35
2.8
1000
Attenuator Applications
SMP1302-099
200
200
0.27
0.18
0.15 @ 30 V
0.15 @ 30 V
800
800
20
50
3
7
700
SMP1304-099
1000
The above PIN diode chips are processed on 100 mm silicon wafers, 100% DC tested, sawn and shipped on 6" film frame hoops.
Electrical rejects are identified with black ink.
1. It is not recommended to drive a PIN diode into avalanche breakdown. Permanent damage to the diode may occur.
Chip Dimensions
Quantity of Good Diodes Per Wafer Bonding Pad
Chip Size
Nominal (In.)
0.003 0.0003
Chip Height
Part Number
SMP1320-099
SMP1322-099
SMP1340-099
SMP1353-099
SMP1302-099
SMP1304-099
Min.
Nom.
46,000
46,000
72,000
72,000
46,000
46,000
Nominal (In.)
0.0135 0.001
0.0135 0.001
0.011 0.001
0.011 0.001
0.0135 0.001
0.0135 0.001
Nominal (In.)
0.0055 0.0005
0.0055 0.0005
0.0055 0.0005
0.0055 0.0005
0.0055 0.0005
0.01 0.001
40,000
40,000
65,000
65,000
40,000
40,000
0.0075 0.0003
0.003 0.0003
0.008 0.0005
0.0085 0.0005
0.0085 0.0005
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
May 30, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200140 Rev. C
2
DATA SHEET • PIN DIODE CHIPS SUPPLIED ON FILM FRAME
Typical Performance Data at 25 °C
1000
0.30
SMP1353
0.25
SMP1320
100
0.20
SMP1353
10
SMP1320
0.15
0.10
0.05
0
SMP1340
1
SMP1322
5
SMP1322
SMP1340
20
0.1
0.01
0.1
1
10
100
0
10
15
25
30
35
Forward Current (mA)
Reverse Voltage (V)
Series Resistance vs.
Capacitance vs. Reverse Voltage
Forward Current @ 100 MHz
10000
1000
100
10
0.25
SMP1304
SMP1302
0.20
0.15
0.10
0.05
0
1302
1304
1
0.1
0.01
0.1
1
10
100
0
5
10
15
20
25
30
Forward Current (mA)
Reverse Voltage (V)
Series Resistance vs. Current @ 100 MHz
Capacitance vs. Reverse Voltage
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200140 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 30, 2006
3
DATA SHEET • PIN DIODE CHIPS SUPPLIED ON FILM FRAME
Wafer On Film
0.003 (0.076 mm) Nom.
Separation
Between Die
0.003 (0.076 mm)
Separation
Between Die
5.981 (151.92 mm)
Outer Ring O.D.
5.520 (140.2 mm)
Inner Ring I.D.
3.940 (100 mm)
Wafer Dia.
0.236 (5.99 mm)
Ring Thickness
Grip Ring
Wafer Film Frame Description
●
Wafer on nitto tape
●
Color: light blue
●
Thickness: 2.2–3 mils
●
Tensile strength: 6.6 (lbs. in width)
●
Ring material: plastic
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
May 30, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200140 Rev. C
4
DATA SHEET • PIN DIODE CHIPS SUPPLIED ON FILM FRAME
Copyright © 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided
by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and
Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and
names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200140 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 30, 2006
5
相关型号:
©2020 ICPDF网 联系我们和版权申明