SMP1307-005LF [SKYWORKS]
Very Low Distortion Attenuator Plastic Packaged PIN Diodes; 非常低的失真衰减塑料封装PIN二极管
| 型号： | SMP1307-005LF |
| 厂家： | 
SKYWORKS SOLUTIONS INC. |
| 描述： | Very Low Distortion Attenuator Plastic Packaged PIN Diodes |
| 文件： | 总6页 (文件大小：79K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA SHEET
SMP1307 Series: Very Low Distortion Attenuator
Plastic Packaged PIN Diodes
Features
●
Low distortion design
●
Frequency range from HF to > 2 GHz
●
Designed for CATV AGC applications
●
Designed for high volume wireless applications
Description
The SMP1307 series of plastic packaged, surface mountable, low
capacitance (0.3 pF) silicon PIN diodes are designed for use in
attenuator applications from 5 MHz to beyond 2 GHz. The thick
175 µm I region of these PIN diodes makes them very attractive
for use in very low distortion PI and TEE attenuators commonly
Absolute Maximum Ratings
Characteristic
Value
200 V
Reverse voltage (V )
R
used in TV distribution applications. The 1.5 µs typical carrier life-
time of these diodes results in resistance of 100 Ω maximum at
1 mA and 10 Ω maximum at 10 mA. Available in a selection
of plastic packages, as a single diode in the small footprint
SOD-323, and in a variety of configurations in the SOT-23. Also
available in a SOT-5 (SMP1307-027) package as a four diode
array designed for insertion in the commonly used 4 diode PI
attenuator circuit.
Power dissipation @ 25 °C lead
250 mW
temperature (P )
D
Storage temperature (T
)
ST
-65 °C to +150 °C
-65 °C to +150 °C
Class 1C
Operating temperature (T
ESD human body model
)
OP
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
Skyworks offers lead (Pb)-free “environmentally
friendly” packaging that is RoHS compliant
(European Parliament for the Restriction of
Hazardous Substances).
NEW
CAUTION: Although this device is designed to be as robust as
possible, Electrostatic Discharge (ESD) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Common
Single
Cathode
Series Pair
SOT-23
Single
SOD-323
PI
SOT-23
SOT-23
SOT-5
SMP1307-001
Marking: PJ1
SMP1307-001LF
Marking: RJ1
SMP1307-004
Marking: PJ3
SMP1307-004LF
Marking: RJ3
SMP1307-005
Marking: PJ2
SMP1307-005LF
Marking: RJ2
SMP1307-011
Marking: PJ
SMP1307-011LF
Marking: RJ
SMP1307-027
Marking: PJM
L = 1.5 nH
S
L = 1.5 nH
S
L = 1.5 nH
S
L = 1.5 nH
S
LF denotes lead (Pb)-free packaging option as an alternative to our standard tin/lead
(Sn/Pb) packaging.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200045 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • October 26, 2004
1
DATA SHEET • SMP1307 SERIES
Electrical Specifications at 25 °C
Parameter
Condition
V = 200 V
R
Typ.
Max.
10
Unit
µA
pF
Ω
Reverse current (I )
R
(1)
Capacitance (C )
F = 1 MHz, V = 30 V
0.30
100
15
T
Resistance (R )
F = 100 MHz, I = 1 mA
F = 100 MHz, I = 10 mA
F = 100 MHz, I = 100 mA
75
S
Resistance (R )
Ω
S
Resistance (R )
3.0
Ω
S
Forward voltage (V )
I = 10 mA
0.85
1.5
V
F
F
Carrier lifetime (TI)
I = 10 mA
F
µs
µm
I region width
175
1. The SMP1307-027 maximum capacitance is 0.45 pF.
Typical Performance Data
100
10
10000
1000
100
10
1
0.1
0.01
1
0.1
0.01
0.1
1
10
100
400
500
600
700
800
900
1000
Forward Current (mA)
Forward Voltage (mV)
Series Resistance vs. Current @ 100 MHz
DC Characteristic
0.8
0.7
0.6
0.5
0.4
400
350
300
250
200
150
100
50
1 MHz
0 V
0.3 100 MHz
10 V
40 V
0.2
1 GHz
0.1
0
0
0
500
1000
1500
2000
0
1
2
5
10
20
50
100
Frequency (MHz)
Reverse Voltage (V)
Conductance vs. Frequency
and Reverse Voltage
Capacitance vs. Reverse Voltage
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
October 26, 2004 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200045 Rev. A
2
DATA SHEET • SMP1307 SERIES
Typical Resistance vs. Temperature @ 100 MHz
SMP1307-027 4 Diode PI Attenuator
The SMP1307-027 employs 4 PIN diode junctions in a 5-lead
SOT package. It is configured for ease of insertion in the PI
attenuator circuit commonly used for broadband TV distribution
systems, covering a frequency range from 5 MHz to beyond
1 GHz.
R
R
R
R
R
I
-55 °C
(Ω)
-15 °C
(Ω)
+25 °C
(Ω)
+65 °C
(Ω)
+100 °C
(Ω)
F
(mA)
0.02
2386.0
572.0
203.0
66.1
9.1
2360.0
598.0
219.0
71.2
10.0
6.0
2546.0
632.0
236.0
79.3
10.9
6.6
2520.0
633.0
239.0
83.6
12.2
7.4
2440.0
639.0
242.0
85.4
12.9
7.8
0.10
0.30
A broadband attenuator was designed using the SMP1307-027
showing good performance to 2 GHz. The attenuator was evalu-
ated with a 50 Ω source and load impedance. The following
figure shows the circuit diagram and measured performance.
1.00
10.00
20.00
100.00
5.6
2.2
2.4
2.6
3.0
3.2
3
4
2
1
5
VTUNE
0–20 V
C6
10,000 pF
R2
1 k
C5
C1
10,000 pF
10,000 pF
D1
D3
RF
Output
RF
Input
D2
R6
560
R1
1 k
D4
R3
1 k
R4
1 k
C4
10,000 pF
C2
R5
560
10,000 pF
VREF
5 V
C3
10,000 pF
D1–D4 SMP1307-027
A 4 diode PI attenuator utilizing individual SMP1307-011 PIN diodes is described in the “A Wideband General Purpose PIN Diode Attenuator” Application Note.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200045 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • October 26, 2004
3
DATA SHEET • SMP1307 SERIES
Recommended Solder Reflow Profiles
Profile Feature
SnPb Eutectic Assembly
Lead (Pb)-Free Assembly 100% Sn
Average ramp-up rate (T to T )
3 °C/second max.
3 °C/second max.
L
P
Preheat
Temperature min. (T
)
100 °C
150 °C
SMIN
Temperature max. (T
)
150 °C
200 °C
SMAX
Time (min. to max.) (ts)
60–120 seconds
60–80 seconds
T
SMAX
to T
L
Ramp-up rate
—
3 °C/second max.
Time maintained above:
Temperature (T )
183 °C
217 °C
L
Time (t )
60–150 seconds
60–150 seconds
L
Peak temperature (T )
240 +0/-5 °C
250 +0/-5 °C
P
Time within 5 °C of actual peak temperature (tp)
Ramp-down rate
10–30 seconds
6 °C/second max.
6 minutes max.
20–40 seconds
6 °C/second max.
8 minutes max.
Time 25 °C to peak temperature
All temperatures refer to the topside of the package, measured on the package body surface.
Reference JEDEC J-STD-020B.
tp
TP
Critical Zone
TL to TL
TL
IL
TSMAX
TSMIN
ts
Preheat
25 ˚C
t 25 ˚C to Peak
Time
Reference JEDEC J-STD-020
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
October 26, 2004 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200045 Rev. A
4
DATA SHEET • SMP1307 SERIES
0
-10
-20
-30
-40
-50
SOT-5
VCTL = 20 V
VCTL = 15 V
VCTL = 10 V
0.014
(0.36 mm)
Min.
0.020
(0.51 mm)
Max.
5
4
0.060
(1.52 mm)
Min.
0.069
(1.75 mm)
Max.
0.102
(2.59 mm)
Min.
0.118
(3.00 mm)
Max.
V
CTL = 5 V
VCTL = 0 V
0.037
1
2
3
0.037
(0.94 mm) Ref.
0.035
(0.89 mm)
Min.
0.057
(1.49 mm)
Max.
(0.94 mm) Ref.
0.110 (2.79 mm) Min.
0.118 (3.00 mm) Max.
0.035 (0.89 mm) Min.
0.051 (1.30 mm) Max.
0
0.5
1.0
1.5
2.0
0.134
10˚ Max.
(3.4 mm)
Frequency (GHz)
SMP1307-027 Attenuation vs. Frequency
0.004 (0.10 mm) Min.
0.024 (0.61 mm) Max.
0.000 (0.00 mm) Min.
0.006 (0.15 mm) Max.
SOT-23
SOD-323
0.110 (2.80 mm) Min.
0.120 (3.04 mm) Max.
0.090 (2.30 mm) Min.
0.108 (2.74 mm) Max.
0.012 (0.30 mm) Min.
0.020 (0.50 mm) Max.
0.010
3
(0.25 mm) Min.
0.016
(0.40 mm) Max.
0.083 (2.10 mm) Min.
0.104 (2.64 mm) Max.
0.047 (1.20 mm) Min.
0.055 (1.40 mm) Max.
0.045 (1.15 mm) Min.
0.053 (1.35 mm) Max.
1
2
1
2
0.037 (0.95 mm) Ref.
0.020 (0.51 mm) Ref.
0.063 (1.60 mm) Min.
0.071 (1.80 mm) Max.
Cathode
Indicator
0.076 (1.92 mm) Ref.
0.008 (0.20 mm) Nom.
0.035 (0.89 mm) Min.
0.044 (1.12 mm) Max.
0.003 (0.080 mm) Min.
0.008 (0.20 mm) Max.
0.050
(1.25 mm) Max.
0.006
(0.15 mm) Typ.
8˚ Max.
0.004 (0.10 mm) Max.
0.0005 (0.01 mm) Min.
0.004 (0.10 mm) Max.
0.010 (0.25 mm) Min.
0.022 (0.55 mm) Ref.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200045 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • October 26, 2004
5
DATA SHEET • SMP1307 SERIES
Copyright © 2002, 2003, 2004, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products. These materials are provided by Skyworks as a service to its customers and may be
used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials. Skyworks may make changes to its documentation, products,
specifications and product descriptions at any time, without notice. Skyworks makes no commitment to update the information and shall have no responsibility whatsoever for conflicts,
incompatibilities, or other difficulties arising from future changes to its documentation, products, specifications and product descriptions.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by or under this document. Except as may be provided in Skyworks Terms and Conditions of
Sale for such products, Skyworks assumes no liability whatsoever in association with its documentation, products, specifications and product descriptions.
THESE MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED OR OTHERWISE, RELATING TO SALE AND/OR USE OF SKYWORKS PRODUCTS INCLUDING
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL
PROPERTY RIGHT. SKYWORKS FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS.
SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST
PROFITS THAT MAY RESULT FROM THE USE OF THESE MATERIALS WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications. Skyworks customers using or selling Skyworks products for use in such applications do so at their
own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale.
The following are trademarks of Skyworks Solutions, Inc.: Skyworks™, the Skyworks logo, and Breakthrough Simplicity™. Product names or services listed in this publication are for identification
purposes only, and may be trademarks of Skyworks or other third parties. Third-party brands and names are the property of their respective owners. Additional information, posted at
www.skyworksinc.com, is incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
October 26, 2004 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200045 Rev. A
相关型号：
©2020 ICPDF网 联系我们和版权申明