AA107-310 [SKYWORKS]
GaAs IC 5-Bit Digital Attenuator with Serial-to-Parallel Driver 300 kHz-2 GHz; 砷化镓集成电路5位数字衰减器,串行到并行驱动300 kHz至2 GHz的![AA107-310](http://pdffile.icpdf.com/pdf1/p00102/img/icpdf/AA107-310_550160_icpdf.jpg)
型号: | AA107-310 |
厂家: | ![]() |
描述: | GaAs IC 5-Bit Digital Attenuator with Serial-to-Parallel Driver 300 kHz-2 GHz |
文件: | 总6页 (文件大小:159K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
DATA SHEET
AA107-310, AA107-310LF: GaAs IC 5-Bit Digital Attenuator
with Serial-to-Parallel Driver 300 kHz–2 GHz
Features
Positive voltage operation (5 V)
QFN 5 x 5 (-310)
●
VSS
VDD
J2
●
QFN 5 x 5 mm leadless package
●
Integrated silicon serial-to-parallel driver
SERDATAOUT
SERDATAIN
8 dB
4 dB
●
Attenuation 0.5 dB steps to 15.5 dB
●
Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C
per JEDEC J-STD-020
Description
2 dB
LATCH Enable
The AA107-310 is a GaAs FET IC 5-bit digital attenuator with a
serial-to-parallel driver packaged in a 32-leadless exposed pad
plastic package. It is particularly suited at IF frequencies where high
attenuation accuracy, low insertion loss, and low intermodulation
products are required. Typical applications include base station,
wireless and RF data and wireless local loop gain control circuits.
1 dB
CLOCKIN
Reset
0.5 dB
Skyworks offers lead (Pb)-free, RoHS (Restriction of
Hazardous Substances)-compliant packaging.
NEW
J1
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200203 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • September 11, 2006
1
DATA SHEET • AA107-310, AA107-310LF
Electrical Specifications at 25 °C
V
DD
= 5 V, Z = 50 Ω, unless otherwise specified
0
Parameter
Condition
Frequency
Min.
Typ.
1.4
Max.
1.7
Unit
dB
(1)
Insertion loss
300 kHz–1 GHz
300 kHz–2 GHz
1.7
2.2
dB
(2, 3)
(2, 3)
Attenuation range
15.5
dB
Attenuation accuracy
300 kHz–1 GHz
300 kHz–2 GHz
(0.2 ꢀ 3ꢁ of
Attenuation Setting in dB)
(0.4 ꢀ 3ꢁ of
dB
dB
Attenuation Setting in dB)
VSWR (I/O)
300 kHz–2 GHz
1.4:1
1.8:1
Switching characteristics
Rise, fall
On, off
10/90ꢁ or 90/10ꢁ RF
50ꢁ CTL to 90/10ꢁ RF
50
100
50
ns
ns
mV
Video feedthru
T
RISE
= 1 ns, BW = 500 MHz
Input power for 1 dB compression
0.5–2 GHz
0.05 GHz
24
17
29
22
dBm
dBm
Intermodulation intercept point (IP3)
For two-tone input power 5 dBm
each tone
0.5–2 GHz
0.05 GHz
44
35
50
40
dBm
dBm
1. Insertion loss changes by 0.003 dB/°C.
2. Attenuation value referenced above insertion loss.
3. Exposed pad must be connected to RF ground to obtain specified attenuation.
DC Electrical Characteristics at 25 °C (V = 5 V)
DD
Parameter
Symbol
Min.
1.7
0
Typ.
3.5
0.3
0.5
500
5
Max.
5
Unit
V
Input voltage high
V
(1)
(0)
IH
Input voltage low
V
0.6
V
IL
Input Leakage current
I
µA
µA
V
L
Quiescent current
I
DD
Supply voltages
V
DD
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
September 11, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200203 Rev. B
2
DATA SHEET • AA107-310, AA107-310LF
Typical Performance Data (V = 5 V)
DD
0
-0.5
-1.0
-1.5
-2.0
1.5
1.4
1.3
1.2
1.1
1.0
2 dB
15.5 dB
8 dB
0.5 dB
4 dB
1.5
Ins. Loss
1.0
1 dB
0
0.5
1.0
1.5
2.0
0
0.5
2.0
Frequency (GHz)
Frequency (GHz)
Insertion Loss vs. Frequency
VSWR vs. Frequency
0.2
0
Absolute Maximum Ratings
4 dB
0.5 dB
2 dB
Characteristic
Value
-0.5 to ꢀ6 V
Supply voltage (V
)
DD
8 dB
-0.2
-0.4
-0.6
-0.8
-1.0
Input voltage (V )
-0.5 – V ꢀ 0.5 V
I
CC
1 dB
Power dissipation (P )
500 mW
D
Storage temperature (T
)
ST
-65 °C to ꢀ150 °C
-40 °C to ꢀ85 °C
15.5 dB
Operating temperature (T
)
OP
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
0
0.5
1.0
1.5
2.0
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Frequency (GHz)
Attenuation Accuracy vs. Frequency
Truth Table
Serial Data Input
J –J
1
2
Reset 0.5 dB 1 dB
2 dB
4 dB
8 dB
Attenuation
Insertion loss
0.5 dB
1
1
1
1
1
1
1
0
0
1
0
0
0
0
1
X
0
0
1
0
0
0
1
X
0
0
0
1
0
0
1
X
0
0
0
0
1
0
1
X
0
0
0
0
0
1
1
X
1 dB
Recommended Solder Reflow Profiles
Refer to the “Recommended Solder Reflow Profile”
Application Note.
2 dB
4 dB
8 dB
15.5 dB
Insertion loss
Tape and Reel Information
Refer to the “Discrete Devices and IC Switch/Attenuators
Tape and Reel Package Orientation” Application Note.
VIL (0) = 0 to 0.5 V.
VIH (1) = 3.5 to 5 V.
X = Don’t Care.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200203 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • September 11, 2006
3
DATA SHEET • AA107-310, AA107-310LF
Surface Mount Land Pattern
Pin
Symbol
Serial data out
GND
Function
Serial data output
Ground
1
5 x 5 mm QFN 32-Lead
2–4
5
0.020 (0.50 mm)
0.013 (0.33 mm)
J
1
RF input/output
Ground
0.020
(0.50 mm)
6–19
20
GND
J
RF input/output
Ground
2
21–23
24
GND
RESET
LE
Reset
0.122
(3.10 mm)
25
Latch enable
Sq.
26
Serial data in
Clock In
Serial data input
Serial clock input
Low output voltage level
Ground
27
0.020
(0.50 mm)
28
V
SS
29
GND
0.020 (0.50 mm)
30
C
C
Charge pump capacitor
Charge pump capacitor
Supply voltage
2
1
Dimensions in inches (mm).
31
32
VDD
Timing Diagram
LE
T4
T1
SCK
SDA
T5
T2
T3
Parameter
Symbol
Min.
7.5
7.5
5
Typ.
Max.
Unit
LE setup time
SDA setup time
SDA hold time
LE hold time
T
1
T
2
T
3
T
4
15
15
10
10
16
ns
ns
ns
5
ns
Clock frequency
Clock period
f
100
MHz
CLK
T
5
1/f
CLK
Serial data (SDA) is shifted into the register on the rising edge of
the clock (SCK), least significant bit (LSB) first. The attenuator will
change states on the rising edge of the latch-enable (LE) signal,
according to the most recent 5 bits of shifted data accepted since
the previous falling edge of the LE signal.
Power-up sequence:
0. Connect ground
1. Apply V
DD
2. Set all inputs (SCK, SDA, LE)
Power-down sequence should be the reverse of above.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
September 11, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200203 Rev. B
4
DATA SHEET • AA107-310, AA107-310LF
QFN 5 x 5 (-310)
0.197 (5.00 mm) BSC
0.039 (1.00 mm) Max.
0.001
Pin 1
Indicator
0.187
(4.75 mm) BSC
(0.025 mm)
32
1
0.197
(5.00 mm)
BSC
0.187
(4.75 mm)
BSC
Seating
Plane
12˚ Max.
0.122 (3.10 mm)
0.006 (0.15 mm)
32
1
0.122 (3.10 mm)
0.006 (0.15 mm)
0.138
(3.50 mm) Ref.
0.019 (0.50 mm) BSC
0.138 (3.50 mm) Ref.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200203 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • September 11, 2006
5
DATA SHEET • AA107-310, AA107-310LF
Copyright © 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided
by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and
Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and
names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
September 11, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200203 Rev. B
©2020 ICPDF网 联系我们和版权申明