AA104-73LF [SKYWORKS]
GaAs IC 1-Bit Digital Attenuator, 32 dB 300 kHz-2.5 GHz; 砷化镓IC 1位数字衰减器, 32分贝300 kHz至2.5 GHz的型号: | AA104-73LF |
厂家: | SKYWORKS SOLUTIONS INC. |
描述: | GaAs IC 1-Bit Digital Attenuator, 32 dB 300 kHz-2.5 GHz |
文件: | 总6页 (文件大小:366K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
AA104-73, AA104-73LF: GaAs IC 1-Bit Digital Attenuator,
32 dB 300 kHz–2.5 GHz
Features
Pin Out
Positive Voltage
●
1-bit attenuation of 32 dB 300 kHz–1 GHz, 27 dB 1–2 GHz, 24 dB
2–2.5 dB
●
Combine with AA260-85 or AA101-80 for 63 dB 6-bit solution
J1
V2
CBL
●
Tune with one capacitor and/or resistor to desired operating frequency
32
and attenuation
NC/GND
V1
CBP
●
Ideal for both IF and RF applications including cable, GSM, PCS, EDGE,
3G and ISM
RF
GND
J2
●
Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C
CBL
per JEDEC J-STD-020
CBL = 47 pF for frequencies >500 MHz. See table on previous page for CBP value.
See application notes APN2013 and APN2014 for 6 bit attenuator requirements.
Description
The AA104-73 is a 1-bit, GaAs IC FET digital attenuator in a low-cost
SOT-6 package. This attenuator has up to 32 dB total attenuation. The
attenuator requires two lines of voltage control. The AA104-73 is partic-
ularly suited where high attenuation accuracy, low insertion loss, and
low intermodulation products are required. Typical application is as a
sixth bit value for the AA260-85 and AA101-80. A total attenuation of
63 dB in 1 dB steps can be obtained by combining the two attenuators.
Skyworks offers lead (Pb)-free, RoHS (Restriction of
Hazardous Substances)-compliant packaging.
NEW
Electrical Specifications at -40 °C to +85 °C (0, 3 V), (0, 5 V)
(1)
(2)
Parameter
Frequency
Min.
Typ.
Max.
Unit
Insertion loss
300 kHz–1.0 GHz
1.0–2.0 GHz
2.0–2.5 GHz
0.8
0.9
1.0
1.0
1.2
1.3
dB
dB
dB
Attenuation range
300 kHz–1.0 GHz
1.0–2.0 GHz
2.0–2.5 GHz
32
27
24
23
dB
dB
dB
dB
2.3–2.5 GHz
(3, 4)
Attenuation accuracy
300 kHz–0.5 GHz
0.85–0.95 GHz
1.7–2.0 GHz
2.0–2.5 GHz
2.3–2.5 GHz
(0.4 ꢀ 10ꢁ of attenuation setting in dB)
(0.4 ꢀ 5ꢁ of attenuation setting in dB)
(0.5 ꢀ 6ꢁ of attenuation setting in dB)
(0.6 ꢀ 7ꢁ of attenuation setting in dB)
(0.7 ꢀ 7ꢁ of attenuation setting in dB)
dB
dB
dB
dB
(5)
VSWR (insertion loss state)
300 kHz–2.5 GHz
1.2:1
1.5:1
1.5:1
2.0:1
(5)
VSWR (attenuation state)
300 kHz–2.5 GHz
1. All measurements made in a 50 Ω system, unless otherwise specified.
2. Operates to 300 kHz when controlled with negative voltage, CBP not required.
4. Attenuation referenced to insertion loss.
5. Input/output. In band.
3. Attenuation value set by CBP
.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200200 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • November 15, 2006
1
PRELIMINARY DATA SHEET • AA104-73, AA104-73LF
Electrical Specifications at -40 °C to +85 °C (0, 3 V), (0, 5 V)
Parameter
Condition
Frequency
Min.
Typ.
Max.
Unit
Switching characteristics
Rise, fall
On, off
10/90ꢁ or 90/10ꢁ RF
50ꢁ CTL to 90/10ꢁ RF
= 1 ns, BW = 500 MHz
50
100
25
ns
ns
mV
Video feedthru
T
RISE
Input Power for 1 dB compression
Intermodulation intercept point (IP3)
V = 3 V
V = 5 V
S
0.5–2.5 GHz
0.5–2.5 GHz
14
18
21
23
dBm
dBm
S
For two-tone input power ꢀ10 dBm
V = 3 V
V = 5 V
S
0.5–2.5 GHz
0.5–2.5 GHz
36
38
41
44
dBm
dBm
S
Control voltages
V
LOW
V
HIGH
= 0 to 0.2 V @ 20 µA max.
= 3 V @ 100 µA max. to 5 V @ 200 µA max.
Typical Performance Data at -40 °C to +85 °C (0, 5 V) C = 12 pF, C = 47 pF
BP
BL
0
-27
-28
-29
-30
-31
-32
-33
-0.25
-0.50
-40 °C
25 °C
-0.75
-1.00
-1.25
-1.50
85 °C
-40 °C
85 °C
1.5
25 °C
0
0.5
1.0
2.0
2.5
3.0
0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20
Frequency (GHz)
Frequency (GHz)
Insertion Loss vs. Frequency
32 dB State vs. Frequency
2.0
1.8
1.6
1.4
1.2
1.0
3.0
J1 -40 °C
2.5
2.0
1.5
1.0
J1 -40 °C
J2 -40 °C
J1 85 °C
J1 25 °C
J1 85 °C
J2 85 °C
J2 -40°C
J2 85 °C
J2 25 °C
1.0 1.5
J1 25 °C
0.5
J2 25 °C
2.5
0
1.0
1.5
2.0
3.0
0
0.5
2.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
VSWR vs. Frequency
Insertion Loss State
VSWR vs. Frequency
32 dB State
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
November 15, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200200 Rev. A
2
PRELIMINARY DATA SHEET • AA104-73, AA104-73LF
Compression Point vs. Voltage and Temperature
IP3 vs. Voltage and Temperature
1 dB
1 dB
Control Voltage
(V)
Temperature
(°C)
IP3 @ 10 dBm
each tone (dBm)
Compression
insertion loss
state (dBm)
Compression
32 dB state
(dBm)
Control voltage
(V)
Temperature
(°C)
3
3
3
5
5
5
-40
25
41
42
40
43
44
42
3
3
3
5
5
-40
25
21
21
21
22
22
22
16.5
15
85
-40
25
85
14
-40
25
22.5
22.5
22.5
85
Two-tone input power: 10 dBm each tone.
Tone frequencies: 500 and 501 MHz.
5
85
Frequency: 500 MHz.
0
-5
2.0
1.8
1.6
1.4
2.2 pF
2.7 pF
-10
-15
-20
-25
-30
2.2 pF
2.7 pF
12 pF
1.5
Ins. Loss
3.3 pF
3.3 pF
2.0
1.2
1.0
12 pF
-35
0
0.5
1.0
1.5
2.5
0
0.5
1.0
2.0
2.5
Frequency (GHz)
Frequency (GHz)
Attenuation vs. Frequency DC–2.5 GHz
= 2.2, 2.7, 3.3 and 12 pF
VSWR vs. Frequency DC–2.5 GHz
= 2.2, 2.7, 3.3 and 12 pF
C
BP
C
BP
2.0
1.8
1.6
1.4
1.2
1.0
-15.0
-17.5
-20.0
-22.5
-25.0
-27.5
-30.0
220 pF
2.2 pF
1.8 pF
1000 pF
1500 pF
2.7 pF
3.3 pF
Ins. Loss
1.50
1.75
2.00
2.25
2.50
0
0.1
0.2
0.3
0.4
0.5
Frequency (GHz)
Frequency (GHz)
Attenuation vs. Frequency 1.5–2.5 GHz
= 2.2, 2.7, and 3.3 pF
VSWR vs. Frequency DC–0.5 GHz
= 220, 1000, 1500 pF
C
BP
C
BP
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200200 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • November 15, 2006
3
PRELIMINARY DATA SHEET • AA104-73, AA104-73LF
C
BL
(pF)
C
(pF)
BP
Operating Frequency (GHz)
2.3–2.5
-20
47
1.8
220 pF
47
47
2.2
2.7
2–2.3
-24
1000 pF
1.8–2
47
3.3
1.6–1.8
-28
-32
47
12
0.9–1.05
47
15
0.8–0.9
1500 pF
330
1500
220
1000
1500
0.2–0.35
-36
-40
0.07–0.2
10000
0.015–0.25
0
0.1
0.2
0.3
0.4
0.5
Frequency (GHz)
Absolute Maximum Ratings
Attenuation vs. Frequency DC–0.5 GHz
= 220, 1000, 1500 pF
Characteristic
Value
C
BP
RF input power
1 W > 500 MHz 0/8 V
0.5 W @ 50 MHz 0/8 V
Supply voltage
8 V
Truth Table
Control voltage
-0.2 V, ꢀ8 V
Positive Control
Operating temperature
Storage temperature
-40 °C to ꢀ85 °C
-65 °C to ꢀ150 °C
Attenuation
J –J
V
1
V
2
1
2
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
V
HIGH
0
Reference I.L.
32 dB
0
V
HIGH
All other conditions not recommended.
VHIGH = 3 to 5 V.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Recommended Solder Reflow Profiles
Refer to the “Recommended Solder Reflow Profile”
Application Note.
Tape and Reel Information
Refer to the “Discrete Devices and IC Switch/Attenuators
Tape and Reel Package Orientation” Application Note.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
November 15, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200200 Rev. A
4
PRELIMINARY DATA SHEET • AA104-73, AA104-73LF
Application: AA104-73 Used as 1-Bit 20 dB Attenuator 25 °C (0, 5 V)
2.50
2.25
2.00
J1
V2
CBL
20
NC/GND
V1
CBP RBP
RF
GND
1.75
1.50
1.25
1.00
J2
CBL
J1 25 °C
J2 25 °C
CBL = 220 pF, CBP = 100 pF, RBP = 15 Ω, fC = 400 MHz with select values of CBP and RBP
center frequency and attenuation value respectively can be varied.
,
-15
-16
-17
-18
-19
-20
-21
-22
0
0.2
0.4
0.6
0.8
1.0
Frequency (GHz)
VSWR vs. Frequency
20 dB State
SOT-6
0.074
20 dB 25 ˚C
-23
(1.90 mm) Ref.
0.126 (3.20 mm)
0.087 (2.20 mm)
Pin 6
-24
-25
0.071 (1.80 mm)
0.052 (1.30 mm)
Pin 1
Indicator
Pin 1
0
0.2
0.4
0.6
0.8
1.0
Frequency (GHz)
0.020 (0.51 mm)
0.014 (0.350 mm)
0.037 (0.95 mm) Ref.
20 dB State vs. Frequency
= 100 pF, C = 220 pF, R = 15 Ω
C
0.012
BP
BL
BP
(0.30 mm)
Typ.
0.057 (1.45 mm)
0.035 (0.90 mm)
0.006
5.0° 1°
(0.15 mm)
0.000
0.014
(0.26 mm)
0.004
(0.00 mm)
(0.10 mm)
5.0° 1°
0.022 (0.61 mm)
0.004 (0.10 mm)
0.122 (3.10 mm)
0.106 (2.70 mm)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200200 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • November 15, 2006
5
PRELIMINARY DATA SHEET • AA104-73, AA104-73LF
Copyright © 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided
by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and
Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and
names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
November 15, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200200 Rev. A
相关型号:
©2020 ICPDF网 联系我们和版权申明