SLM-13-750A-T23 [SHINMEI]

2mm Travel Thin Type Slide Switch;


型号：	SLM-13-750A-T23
厂家：	SHINMEI
描述：	2mm Travel Thin Type Slide Switch
文件：	总4页 (文件大小：79K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

http://www.shinmei-e. co. jp

2mm Travel Thin Type Slide Switch

SLM-750 Series

1/4

[] Features

<>2mm travel.

<>Thin type only 2mm height

<>Recoil type.

<>It is a reflow solder mounting type.

<>Taping package.

[] Applications

<> Signal switching for CD/MD/DVD such a portable audio, digital camera, remote control etc.

[] Products line

Products number

SLM-13-750-1-T23

SLM-13-750A-T23

SLM-13-750B-T23

Poles

Positions

Operation mechanism

Single-side recoil

Double-side recoil

Single-side recoil

[] Typical specifications

Items

Specifications

0.3A 4VDC

Rating (max) (resistive load)

Contact resistance

70 milliohm

Insulation resistance

Withstanding voltage

Operating force

100 megohm

500VAC 1min.

Refer to the dimensions

10,000 cycles

Operating life

Operation temperature range

Storage temperature range

From -10 to +60 degree Celsius

From –25 to +70 degree Celsius

SHINMEI ELECTRIC CO., LTD.

SLM-750 Series

2/4

[] Dimensions

Unit : mm

Style

Circuit diagram

SLM-13-750-1-T23

Operating force : From C to R, 1.25 from 3.25N

From R to C, 0.75 from 2.75N

From C to L, 1 from 2.05N

SLM-13-750A-T23

Operating force : 1 from 2.05N

SHINMEI ELECTRIC CO., LTD.

SLM-750 Series

3/4

[] Dimensions

Unit : mm

Style

Circuit diagram

SLM-13-750B-T23

Operating force : C to R, 1 from 2.05N

From L to C 0.75 from 2.75N

From C to L 1.25 from 3.25N

[] Dimensions

Unit : mm

Round pattern dimension (TOP VIEW)

[] Notes

The appearance and specifications of the product may be modified to improve its performance without prior notice.

This catalog shows only outline specifications. When using the product, please obtain formal specifications.

Regardless of the applications of these products being introduced in this catalog, when using them for equipments

and devices requiring a high degree of safety, respective manufacturers shall preserve the safety of the planned

equipments and devices by providing necessary protective and redundancy circuits and reconfirm if safety is being

duly preserved.

The general-use switches cannot be washed. If the switch is washed, the lubricating oil on contacts and

mechanical portions may flow out and also detergent remains inside the switch, these may be the factors to cause

intermittent contact, insulation fault and withstanding voltage fault. If you need the cleaning, please select the

washable switch.

SHINMEI ELECTRIC CO., LTD.

SLM-750 Series

4/4

The printed circuit board and outer material of switch are normally non-flame resisting. If you need flame

resisting material, please select the proper class to meet your application.

Note that if the stress more than specifications is applied to the switch during the operation, they might cause

deformation and defects in electrical performance. Care shall be taken not to apply abnormal stress to the switch.

Make the soldering according to the temperature and time specified in the specification sheets, catalogue and so on.

If the soldering is made with the conditions out of the specifications, there may be the deformation of the mounting

board and the composition parts of switches, the loose of terminals, detachment of the parts and the deterioration

of the electrical characteristics.

Characteristics of switch may change due to the warping of the circuit writing board. Consideration should be

given to the pattern design and layout.

In case the soldering is done twice, the second soldering shall be made after the temperature at the first soldering

portion becomes the room temperature. If it will be made consecutively, there is the possibility of the deformation

of PC board and peripheral parts, the loose of terminals, detachment of the parts and the deterioration of the

electrical characteristics.

10. In case of the soldering of the slide switches, it shall be made after the operating knob changes over completely.If

the soldering goes on in course of switching, operating force may fall greatly.

11. In manual soldering, consider that the abnormal pressure of the soldering iron shall not be applied to the tip of the

terminal as well do not apply any pressure for more than 1 minute after soldering.

12. Since there is a possibility of the melting of the soldering flux and the penetration into inside of the switch after soldering, do not wipe off

flux with the solvent.

13. If the switches are used in the following environment, the performance and the characteristics may have bad

influence. Under the environment of corrosive gas such as Cl₂, H₂S, NO₂, SO₂, NH_3.

At the place of the possibility of the attachment of water-drop, moisture, salty water, oil, agent and organic solvent.

Under the places of direct sunshine and dusty environment.

14. If the switches are not used immediately, please store them as delivered in the following environment: with

temperature at -10 to +60 degree C, relative humidity 25 to 75% without water-drop and direct sunshine. There

might be the possibility of the chemical action by sulfur at silver plated terminal, which leads to the reduction of

solderbility and creation of the oxidization and the rust if the switches are stored in the high temperature and high

humid environment for a long time (approx. 6 months). After the break of the seal, the remaining of the switches

shall be stored in a plastic bag to separate them from the moisture and corrosive gas.

SHINMEI ELECTRIC CO., LTD.

SLM-13-750A-T23 [SHINMEI]

相关型号：

SLM-13-750B-T23

SLM-130-01-F-D

SLM-130-01-F-S

SLM-130-01-G-D

SLM-130-01-G-S

SLM-130-01-H-D

SLM-130-01-H-S

SLM-130-01-L-D

SLM-130-01-L-S

SLM-130-01-S-D

SLM-130-01-S-S

SLM-130-01-T-D