RZUP015D4 [SENSORTECHNICS]
Basic pressure sensors; 基本压力传感器型号: | RZUP015D4 |
厂家: | SENSORTECHNICS GMBH |
描述: | Basic pressure sensors |
文件: | 总5页 (文件大小:261K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RZU Series
Basic pressure sensors
FEATURES
· 0...5 to 0...100 psi,
differential, gage or absolute
· Low cost sensor element
· Internal temperature compensation
· Sensortechnics PRO services
MEDIA COMPATIBILITY
To be used with non-corrosive, non-ionic working
fluids such as clean dry air, dry gases and the like.
SPECIFICATIONS
EQUIVALENT CIRCUIT
Maximum ratings
Button or
"N" package
+Vs
Supply current, IS
1.5 mA
Temperature ranges
Compensated
Operating
0 to +50°C
-40 to +85°C
-55 to +125°C
+
Output
Storage
-
Humidity limits (non-condensing)
Lead temperature (soldering 4 sec.)
Common-mode pressure
0 to 100 %RH
250°C
+Vs
DIP Package
150 psi
-
Output
+
E / 11708 / A
1/5
www.sensortechnics.com
RZU Series
Basic pressure sensors
PRESSURE SENSOR CHARACTERISTICS
(IS = 1.0 mA, TA=25°C, common-mode line pressure = 0 psig, pressure applied to P1 for Button, N andA2 housings,
pressure applied to P2 for G2 and D4 housings)
Part number
RZUP005(D,G)...
RZUP015A...
Operating pressure
0...5 psid(g)
Proof pressure8
20 psi
Full-scale span1,5
25 - 65 mV
0...15 psia
30 psia
30 - 95 mV
RZUP015(D,G)...
RZUP030A...
0...15 psid(g)
0...30 psia
30 psi
40 - 95 mV
60 psia
60 - 150 mV
60 - 150 mV
85 - 225 mV
85 - 225 mV
RZUP030(D,G)...
RZUP100A...
0...30 psid(g)
0...100 psia
60 psi
150 psia
150 psi
RZUP100(D,G)...
0...100 psid(g)
PERFORMANCE CHARACTERISTICS
(IS = 1.0 mA, TA=25°C, common-mode line pressure = 0 psig, pressure applied to P1 for Button, N andA2 housings,
pressure applied to P2 for G2 and D4 housings)
Characteristics
Min.
Typ.
-10
Max.
20.0
0.50
2.00
1.50
Units
Zero pressure offset
-30.0
mV
Combined linearity, hysteresis and repeatability1
Thermal effects (0 to 50°C)7
0.25
0.50
0.25
0.10
0.10
5.00
5.00
Offset3
Span2
%FSO
Long term stability of offset and span5
Response time (10 to 90 %)6
Input impedance
mV
ms
4.00
4.00
6.50
6.50
kΩ
Output impedance
Specification notes:
1. Accuracy is the sum of hysteresis and linearity. Hysteresis is the maximum output difference at any point within the operating
pressure range for increasing and decreasing pressure. Linearity refers to the best straight line fit as measured for the
offset, full-scale and 1/2 full-scale pressure at 25°C.
2. This is the maximum temperature shift for span when measured between 0 and 50°C relative to the 25°C reading.
Typical temperature coefficients for span and resistance are -2200 and +2200 ppm/°C respectively.
3. This is the maximum temperature shift for offset when measured between 0 and 50°C relative to the 25°C reading.
4. Span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure.
5. Maximum difference in output at any pressure with the operating pressure range and temperature within 0 to 50°C after:
a) 100 temperature cycles, 0 to 50°C.
b) 1.0 million pressure cycles, 0 psi to full-scale span.
6. Response time for a 0 psi to full-scale span pressure step change. 10 to 90 % rise time.
7. Temp. effect on span and offset is guaranteed by design. Therefore these parameters are not 100 % tested.
8. If the proof pressure is exceeded, even momentarily, the package may leak or burst, or the pressure sensing die may fracture.
Note: The proof pressure for the forward gage of all devices in the dual port DIP package (RZU...4) is the specified value or
100 psi whatever is less. The RZUP100D (button package) can be used in forward gage mode only when the pressure does
not exceed 30 psi, or special care ist taken.
E / 11708 / A
2/5
www.sensortechnics.com
RZU Series
Basic pressure sensors
PHYSICAL DIMENSIONS
Button package
mass: 1 g
third angle projection
dimensions in mm (inches)
Colour codes for Button housing
Colour dot 1
Light blue
Purple
Orange
Dark brown
Pressure range
Colour dot 2
Series
RZU
5 psi
15 psi
30 psi
100 psi
Silver
N package
mass: 5 g
third angle projection
dimensions in mm (inches)
E / 11708 / A
3/5
www.sensortechnics.com
RZU Series
Basic pressure sensors
PHYSICAL DIMENSIONS (cont.)
DIP package, single port
Ø 2.67
(0.105) TYP
2 ° draft
13.97
(0.550)
8.00
(0.315)
13.84
(0.545)
11.94
(0.470)
2.79
(0.110) TYP
Ø 0.64 (0.025)
vent hole
(gage devices only)
6.00
(0.24) NOM
1.91
(0.075)
0.25
(0.010)
TYP
15.2
(0.60) NOM
0.51
(0.020) TYP
2.54
(0.100) TYP
third angle projection
mass: 1 g
dimensions in mm (inches)
DIP package, dual port
Ø 2.29
(0.090) TYP
2 ° draft
3.6
(0.14)
3.43
(0.135)
7.62
(0.300) TYP
13.97
(0.550)
9.65
(0.380)
6.4
(0.25)
7.24
(0.285)
11.94
(0.470)
4.3
(0.17) TYP
0.51
(0.020) TYP
0.25
(0.010)
TYP
2.79
(0.110) TYP
15.2
(0.60) NOM
2.54
(0.100) TYP
third angle projection
mass: 1 g
dimensions in mm (inches)
E / 11708 / A
4/5
www.sensortechnics.com
RZU Series
Basic pressure sensors
ELECTRICAL CONNECTION
RZU...(Button) and
RZU...A2
RZU...G2
RZU...D4
RZU...N
Pin 1 identified by
chamfered corner
Pin 1 identified by
chamfered corner
Pin 1 identification tab
GND
out + 2
1
+Vs
+Vs
+Vs
+Vs
+Vs
out +
out -
GND
out +
out +
1
1
1
P2
P1
P1
P1
P2
GND
out -
GND
out -
3
4
+VS
out -
+Vs
4
4
4
Vent hole
The polarity indicated is for pressure applied to
RZU...(Button), ...N, ...A2
RZU...G2, ...D4
:
:
P1 (forward gage)
P2 (backward gage)
ORDERING INFORMATION - AVAILABLE LISTINGS
Note:
Preferred listings are highlighted in grey
Absolute pressure
Pressure range
Button package
N package
DIP single port
0...5 psi
0...15 psi
0...30 psi
0...100 psi
-
-
-
RZUP015A
RZUP030A
-
-
-
RZUP030AN
RZUP100AN
RZUP030A2
RZUP100A2
Gage and differential/gage pressure
Pressure range
Button package
-
N package
RZUP005DN
RZUP015DN
RZUP030DN
RZUP100DN
DIP single port
DIP dual port
RZUP005D4
RZUP015D4
RZUP030D4
RZUP100D4
0...5 psi
0...15 psi
0...30 psi
0...100 psi
-
RZUP015D
RZUP030D
RZUP100D
RZUP015G2
-
-
Sensortechnics PRO services:
· Extended guarantee period of 2 years
· Improved performance characteristics
· Custom product modifications and adaptations even for small quantities
· Advanced logistics models for supply inventory and short delivery times
· Technical support through application engineers on the phone or at your site
· Fastest possible technical response for design and QA engineers
... plus other services on request
Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the
application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
E / 11708 / A
5/5
www.sensortechnics.com
相关型号:
©2020 ICPDF网 联系我们和版权申明