24PC16K0G2A10 [SENSORTECHNICS]

Unamplified, uncompensated pressure sensors; 无放大，无补偿的压力传感器


型号：	24PC16K0G2A10
厂家：	SENSORTECHNICS GMBH
描述：	Unamplified, uncompensated pressure sensors 无放大，无补偿的压力传感器传感器压力传感器
文件：	总4页 (文件大小：55K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

24PC Series (mbar)

Unamplified, uncompensated pressure sensors

FEATURES

· 0...50 mbar to 0...16 bar

gage or differential

· High impedance bridge

· Miniature package

· Different pinning configurations

· Usable for wet/wet applications⁸

SERVICE

All media compatible with

port 1: - polyetherimide

- silver-filled silicone

- silicon nitride

port 2⁹: - polyetherimide

- fluor-silicone

Scale:

1 cm

1 inch

- silicon

ELECTRICAL CONNECTION

SPECIFICATIONS

Maximum ratings

12 V

Supply voltage

Temperature limits

-55 to +100°C

-40 to +85°C

Storage

Operating

300°C

Lead temperature (10 sec. soldering)

Humidity limits

0...100 %RH

Vibration (0 to 2000 Hz)

(qualification tested)

Output

20 g sine

150 g

Mechanical shock (qualification tested)

Proof pressure¹

1.4 bar

3 bar

all 50, 100 and 250 mbar devices

all 1 bar devices

4 bar

all 2 bar devices

12 bar

35 bar

all 5 bar devices

all 10 and 16 bar devices

June 2005 / 602

1/4

www.sensortechnics.com

24PC Series (mbar)

Unamplified, uncompensated pressure sensors

PRESSURE SENSOR CHARACTERISTICS

V_s= 10.0 ± 0.01 V, t_amb= 25°C (unless otherwise noted)

Full-scale span²

Part number

Operating pressure

Sensitivity typ.

Min.

Typ.

33 mV

Max.

44 mV

24PC0050xxA

24PC0100xxA

24PC0250xxA

24PC01K0xxA

24PC02K0xxA

24PC05K0xxA

24PC10K0xxA

24PC16K0xxA

0 - 50 mbar

0 - 100 mbar

0 - 250 mbar

0 - 1 bar

21 mV

44 mV

61 mV

159 mV

232 mV

113 mV

84 mV

134 mV

660 µV/mbar

333 µV/mbar

220 µV/mbar

160 µV/mbar

32.6 µV/mbar

12.3 µV/mbar

66 mV

88 mV

83 mV

105 mV

276 mV

410 mV

215 mV

163 mV

260 mV

218 mV

320 mV

163 mV

123 mV

197 mV

0 - 2 bar

0 - 5 bar

0 - 10 bar

0 - 16 bar

COMMON PERFORMANCE CHARACTERISTICS

V_s= 10.0 ± 0.01 V, t_amb= 25°C (unless otherwise noted)

Characteristics

Min.

Typ.

Max.

Unit

Zero pressure offset

Temperature effects (0 - 50°C)⁴

-30

+30

Offset

Span

±2.0

-2000

+2200

±0.25

±0.15

±0.5

ppm/°C

% span

Temperature effects on bridge impedance⁴

Linearity (P2 > P1, BSL)³

Repeatability and hysteresis⁵

Long term stability⁷

±1.0

Input impedance

4.0

5.0

6.0

1.0

kΩ

Output impedance

Response time⁶

5.0

Specification notes:

1. The maximum specified pressure which may be applied to the sensor without causing a permanent change in the output characteristics.

2. Span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. Span is

ratiometric to the supply voltage.

3. Linearity (BSL), the deviation of measured output at constant temperature (25°C) from "Best Straight Line" determined by three

points, offset pressure, full-scale pressure and half full-scale pressure.

V_{full scale}- V_offset

(full scale pressure)

–

x (½ full scale pressure) + V_offset

: 2 (V_{full scale}) x 100 %

[

{

}]

½ full scale

where: V = measured value for each device

4. Error band of the offset voltage, span or bridge impedance in the specified temperature range, relative to the 25°C reading.

5. Repeatability, the deviation in output readings for successive application of any given input pressure (all other conditions

remaining constant. Hysteresis, the error defined by the deviation in output signal obtained when a specific pressure point is

approached first with increasing pressure, then with decreasing pressure or vice versa (all other conditions remaining constant).

6. Response time for 0 to full-scale pressure step change, readings taken at 10 % and 90 % of full-scale pressure.

7. Long term stability of offset and span over a period over one year.

8. The sensors might be used on both ports, for media compatible with the components, specified under "Service" (page 1).

9. Other sealing materials are available on request. Minimum order quantities might be required.

10. Other pressure port styles, like barbed ones, luers, modular, M5, needle style or flow through connection, are

available on request. For these specials see the data sheet "24/26PC specials". Minimum order quantities might be required, call

Sensortechnics for assistance.

2/4

June 2005 / 602

www.sensortechnics.com

24PC Series (mbar)

Unamplified, uncompensated pressure sensors

OUTLINE DRAWINGS¹⁰

24PCxxxxG6A (single inline pinning, 1 x 4), gage pressure devices

12,7

Ø 6,4

Ø 5,1

Ø 1,93

PIN 1

Ø 1,27

3 x 2,54

2,29

4 x 1,02

3 2 1

mass: 2 g

dimensions in mm

12,7

24PCxxxxG2A (dual inline pinning, 2 x 2), gage pressure devices

12,7

PIN 3

PIN 4

Ø 6,4

Ø 5,1

Ø 1,93

Ø 1,27

PIN 1

PIN 2

4 x 0,5

4 x 1,02

4 x 0,41

5,1

8,4

12,7

mass: 2 g

dimensions in mm

June 2005 / 602

3/4

www.sensortechnics.com

24PC Series (mbar)

Unamplified, uncompensated pressure sensors

OUTLINE DRAWINGS¹⁰

24PCxxxxD6A (single inline pinning, 1 x 4), differential pressure devices

12,7

Ø 6,4

Ø 5,1

Ø 1,93

PIN 1

Ø 1,27

3 x 2,54

2,29

4 x 1,02

mass: 2 g

dimensions in mm

12,7

ORDERING INFORMATION

xxxx

A¹⁰

Pressure port (Ø 5.1 mm)

24PC series

non compensated

Pressure range

Pinning

2: dual inline pinning, 2 x 2

(not available for

differential devices)

6: single inline pinning, 1 x 4

0050:

0100: 0 - 100 mbar

0250: 0 - 250 mbar

0 - 50 mbar

Pressure mode

D: differential pressure

G: gage pressure

01K0:

02K0:

05K0:

10K0:

16K0:

0 - 1 bar

0 - 2 bar

0 - 5 bar

0 - 10 bar

0 - 16 bar

Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the

application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.

4/4

June 2005 / 602

www.sensortechnics.com

相关型号：