M120909KS2U-G [SENSITRON]
DC-DC Unregulated Power Supply Module, 2 Output, 2W, Hybrid, SIP-7/6;型号: | M120909KS2U-G |
厂家: | SENSITRON |
描述: | DC-DC Unregulated Power Supply Module, 2 Output, 2W, Hybrid, SIP-7/6 输出元件 |
文件: | 总4页 (文件大小:57K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SENSITRON
M - Dual Independent Series
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 1115, REV. -
DC-DC Converters
Fixed Input, 1000V Isolation, Unregulated, Dual-Independent Output
FEATURES:
·
·
·
·
·
·
·
·
·
·
·
·
Isolation Voltage:
1000Vdc
1000MW
1 second
Max. 25°C, Typ. 15°C
Free-Air Cooling
1W (100mW), 2W (200mW)
-40°C ~ + 85°C
-55°C ~ + 125°C
£ 95%
Isolation Resistance (1):
Short-Circuit Duration:
Case Temperature Rise:
Cooling Method:
Standby Power Dissipation:
Operating Temp.:
Storage Temp.:
Humidity:
Soldering Temp. (2):
Case Material:
Mean Time Before Failure:
300°C
Non-Flammable Material (UL94-V0)
> 1,000,000 hours (Operating Temp. 25°C)
M Dual-Independent Output-1W/2W Series Input Characteristics
Part Number
Nominal Input Voltage Input Voltage Range Maximum Input Voltage*
M05XXXXKS/D1/2U
M12XXXXKS/D1/2U
M24XXXXKS/D1/2U
5Vdc
12Vdc
24Vdc
4.5~5.5Vdc
10.8~13.2Vdc
21.6~26.4Vdc
7Vdc
15Vdc
28Vdc
* Voltage above this value may cause permanent damage to the device.
M Dual-Independent Output-1W/2W Series Output Characteristics
Parameter
1W Output Power
MIN
0.25
0.5
TYP
MAX
1
Units
W
2W Output Power
2
W
Line Regulation
1.2
85
Efficiency at 100% Load
Temperature Coefficient
1W Ripple and Noise
2W Ripple and Noise
Switching Frequency
65
75
%
0.03
150
200
200
%/°C
75
mVp-p
100
100
80
kHz
1. All specifications at TA=25°C, 75% of the humidity, Nominal input voltage, full output load unless otherwise
specified. Including both in between Vin & Vout and Vout1 &Vout2.
2. Soldering for 10 seconds at 1.5mm away from the edge.
· 221 West Industry Court · Deer Park, NY 11729-4681 · Phone (631) 586-7600 · Fax (631) 242-9798 ·
· World Wide Web Site - http://www.sensitron.com · E-Mail Address - sales@sensitron.com ·
SENSITRON
M - Dual Independent Series
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 1115, REV. -
M Dual-Independent Output-1W/2W Series Part Number List
Input
Output
Power
SIP-1W
SIP-2W
DIP-1W
DIP-2W
M050505KS1U M050505KS2U M050505KD1U M050505KD2U
M050909KS1U M050909KS2U M050909KD1U M050909KD2U
M051212KS1U M051212KS2U M051212KD1U M051212KD2U
M051515KS1U M051515KS2U M051515KD1U M051515KD2U
M120505KS1U M120505KS2U M120505KD1U M120505KD2U
M120909KS1U M120909KS2U M120909KD1U M120909KD2U
M121212KS1U M121212KS2U M121212KD1U M121212KD2U
M121515KS1U M121515KS2U M121515KD1U M121515KD2U
M240505KS1U M240505KS2U M240505KD1U M240505KD2U
M240909KS1U M240909KS2U M240909KD1U M240909KD2U
M241212KS1U M241212KS2U M241212KD1U M241212KD2U
M241515KS1U M241515KS2U M241515KD1U M241515KD2U
5V/100m A
9V/56m A
1.00W
1.00W
1.00W
1.00W
2.00W
2.00W
2.00W
2.00W
5Vdc
12V/42m A
15V/33m A
5V/200m A
9V/111m A
12V/84m A
15V/67m A
12Vdc
24Vdc
* The voltage of Vout1 can be different with Vout2, for example: M050512KS1U, Vout1=5V, Vout2=12V.
M051205KS1U, Vout1=12V, Vout2=5V.
PIN CONFIGURATION
MxxyyzzKS1/2U PACKAGE DIMENSIONS
MxxyyzzKD1/2U PACKAGE DIMENSIONS
· 221 West Industry Court · Deer Park, NY 11729-4681 · Phone (631) 586-7600 · Fax (631) 242-9798 ·
· World Wide Web Site - http://www.sensitron.com · E-Mail Address - sales@sensitron.com ·
SENSITRON
M - Dual Independent Series
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 1115, REV. -
Mechanical Dimension: in inches / (mm)
MxxyyzzKS1/2U PACKAGE DIMENTIONS
MxxyyzzKD1/2U PACKAGE DIMENTIONS
DIMENSIONAL RECOMMENDATIONS FOR PCB LAYOUT
SIP PACKAGE DIMENSIONS
DIP PACKAGE DIMENSIONS
· 221 West Industry Court · Deer Park, NY 11729-4681 · Phone (631) 586-7600 · Fax (631) 242-9798 ·
· World Wide Web Site - http://www.sensitron.com · E-Mail Address - sales@sensitron.com ·
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court ꢀ Deer Park, NY 11729-4681 ꢀ (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
相关型号:
©2020 ICPDF网 联系我们和版权申明