SMDA05-6.T [SEMTECH]
Unidirectional TVS Array for Protection of Six Lines; 为保护六行单向TVS阵列
| 型号： | SMDA05-6.T |
| 厂家： | 
SEMTECH CORPORATION |
| 描述： | Unidirectional TVS Array for Protection of Six Lines |
| 文件： | 总6页 (文件大小：161K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMDA05-6
Unidirectional TVS Array
for Protection of Six Lines
PROTECTION PRODUCTS
Features
Description
300 watts peak pulse power (tp = 8/20µs)
Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
IEC 61000-4-5 (Lightning) 12A (8/20µs)
Protects up to 6 unidirectional lines
Low operating voltage
The SMDA series of transient voltage suppressors are
designed to protect components which are connected
to data and transmission lines from voltage surges
caused by electrostatic discharge (ESD), electrical fast
transients (EFT), and lightning.
TVS diodes are characterized by their high surge
capability, low operating and clamping voltages, and
fast response time. This makes them ideal for use as
board level protection of sensitive semiconductor
components. The SMDA05-6 is designed to provide
transient suppression on multiple data lines and I/O
ports. It is designed to operate on 5V digital lines. The
low profile SO-8 design allows the user to protect up to
six data and I/O lines with one package.
Low clamping voltage
Solid-state silicon avalanche technology
Mechanical Characteristics
JEDEC SO-8 package
UL 497B listed
Molding compound flammability rating: UL 94V-0
Marking : Part number, date code, logo
Packaging : Tube or Tape and Reel per EIA 481
RoHS/WEEE Compliant
The SMDA05-6 TVS diode array will meet the surge
requirements of IEC 61000-4-2 (Formerly IEC 801-2),
Level 4, “Human Body Model” for air and contact
discharge.
Applications
5V data and I/O lines
Communication lines
Microprocessor based equipment
LAN/WAN equipment
Servers
Notebook and Desktop PC
Instrumentation
Peripherals
Circuit Diagram
Schematic & PIN Configuration
SO-8 (Top View)
www.semtech.com
Revision 08/15/06
1
SMDA05-6
PROTECTION PRODUCTS
Absolute Maximum Rating
Rating
Peak Pulse Power (tp = 8/20µs)
Peak Pulse Current (tp = 8/20µs)
Lead Soldering Temperature
Operating Temperature
Symbol
Ppk
Value
300
Units
Watts
A
IPP
17
TL
260 (10 sec.)
-55 to +125
-55 to +150
°C
TJ
°C
Storage Temperature
TSTG
°C
Electrical Characteristics
SMDA05-6
Parameter
Symbol
VRWM
VBR
IR
Conditions
Minimum
Typical
Maximum
Units
V
Reverse Stand-Off Voltage
Reverse Breakdown Voltage
Reverse Leakage Current
Clamping Voltage
5
It = 1mA
6
V
VRWM = 5V, T=25°C
IPP = 1A, tp = 8/20µs
IPP = 5A, tp = 8/20µs
20
9.8
11
µA
V
VC
Clamping Voltage
VC
V
Junction Capacitance
Cj
Between I/O pins and
Ground
400
pF
VR = 0V, f = 1MHz
www.semtech.com
2006 Semtech Corp.
2
SMDA05-6
PROTECTION PRODUCTS
Typical Characteristics
Non-Repetitive Peak Pulse Power vs. Pulse Time
Power Derating Curve
10
110
100
90
80
70
60
50
40
30
20
10
0
1
0.1
0.01
0
25
50
75
100
125
150
0.1
1
10
100
1000
Ambient Temperature - TA (oC)
Pulse Duration - tp (µs)
Pulse Waveform
Clamping Voltage vs. Peak Pulse Current
110
100
90
80
70
60
50
40
30
20
10
0
11
10
9
W aveform
Parameters:
tr = 8µs
td = 20µs
8
7
e-t
6
5
4
td = IPP/2
Waveform
Parameters:
tr = 8µs
3
2
td = 20µs
1
0
0
2
4
6
8
10
12
14
16
18
0
5
10
15
20
25
30
Peak Pulse Current - IPP (A)
Tim e (µs)
ESD Pulse Waveform (IEC 61000-4-2)
IEC 61000-4-2 Discharge Parameters
Level
First
Peak
Peak
Test
Test
Peak
Current
Current
Voltage
(Contact
Voltage
(Air
Current at 30 ns at 60 ns
Discharge) Discharge)
(A)
7.5
(A)
4
(A)
8
(kV)
(kV)
1
2
3
4
2
2
15
22.5
30
8
4
6
8
4
6
8
4
8
12
16
15
www.semtech.com
2006 Semtech Corp.
3
SMDA05-6
PROTECTION PRODUCTS
Applications Information
Device Connection for Protection of Six Data Lines
Circuit Diagram
The SMDA05-6 is designed to protect up to 6 data or
I/O lines operating at 5 volts. They are unidirectional
devices and may be used on lines where the signal
polarities are above ground (i.e. 0 to 5V).
The device is connected as follows:
z
Pins 1, 2, 3, 4, 5 and 8 are connected to the lines
that are to be protected. Pins 6 and 7 are con-
nected to ground. The ground connections should
be made directly to the ground plane for best
results. The path length is kept as short as pos-
sible to reduce the effects of parasitic inductance
in the board traces.
Connection Diagram
Circuit Board Layout Recommendations for Suppres-
sion of ESD.
DATA IN
DATA OUT
Good circuit board layout is critical for the suppression
of ESD induced transients. The following guidelines are
recommended:
z
z
z
z
Place the TVS near the input terminals or connec-
tors to restrict transient coupling.
Minimize the path length between the TVS and the
protected line.
Minimize all conductive loops including power and
ground loops.
The ESD transient return path to ground should be
kept as short as possible.
8
7
6
5
4
1
2
3
z
z
Never run critical signals near board edges.
Use ground planes whenever possible.
Matte Tin Lead Finish
Matte tin has become the industry standard lead-free
replacement for SnPb lead finishes. A matte tin finish
is composed of 100% tin solder with large grains.
Since the solder volume on the leads is small com-
pared to the solder paste volume that is placed on the
land pattern of the PCB, the reflow profile will be
determined by the requirements of the solder paste.
Therefore, these devices are compatible with both
lead-free and SnPb assembly techniques. In addition,
unlike other lead-free compositions, matte tin does not
have any added alloys that can cause degradation of
the solder joint.
DATA IN
DATA OUT
www.semtech.com
2006 Semtech Corp.
4
SMDA05-6
PROTECTION PRODUCTS
Outline Drawing - SO-8
A
h
D
E
e
DIMENSIONS
INCHES MILLIMETERS
N
h
DIM
A
MIN NOM MAX MIN NOM MAX
H
2X E/2
-
-
-
-
-
-
-
-
-
-
.053
.069 1.35
.010 0.10
.065 1.25
.020 0.31
.010 0.17
1.75
0.25
1.65
0.51
0.25
A1 .004
A2 .049
E1
c
GAGE
b
c
D
.012
.007
PLANE
1
2
.189 .193 .197 4.80 4.90 5.00
0.25
L
(L1)
E1 .150 .154 .157 3.80 3.90 4.00
ccc
C
01
E
e
.236 BSC
.050 BSC
-
6.00 BSC
1.27 BSC
-
0.50
2X N/2 TIPS
e/2
B
DETAIL A
h
L
.010
.020 0.25
.016 .028 .041 0.40 0.72 1.04
(.041)
(1.04)
L1
N
8
8
D
-
-
01
0°
8°
0°
8°
aaa C
aaa
.004
.010
.008
0.10
0.25
0.20
A2
bbb
ccc
A
SEE DETAIL A
SEATING
PLANE
SIDE VIEW
C
A1
bxN
bbb
C
A-B D
NOTES:
1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES).
2. DATUMS -A- AND -B- TO BE DETERMINED AT DATUM PLANE -H-
3. DIMENSIONS "E1" AND "D" DO NOT INCLUDE MOLD FLASH, PROTRUSIONS
OR GATE BURRS.
REFERENCE JEDEC STD MS-012, VARIATION AA.
4.
Land Pattern - SO-8
X
DIMENSIONS
DIM
INCHES
MILLIMETERS
(.205)
(5.20)
3.00
1.27
0.60
2.20
7.40
C
G
P
X
Y
Z
.118
.050
.024
.087
.291
(C)
G
Y
Z
P
NOTES:
1.
THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY.
CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR
COMPANY'S MANUFACTURING GUIDELINES ARE MET.
2.
REFERENCE IPC-SM-782A, RLP NO. 300A.
www.semtech.com
2006 Semtech Corp.
5
SMDA05-6
PROTECTION PRODUCTS
Ordering Information
Part Number
Lead Finish Qty per Reel Reel Size
SMDA05-6.TB
SMDA05-6.TBT
SMDA05-6
SnPb
Pb Free
SnPb
500
500
7 inch
7 inch
N/A
95/Tube
95/Tube
SMDA05-6.T
Pb Free
N/A
Note: Lead-free devices are RoHS/WEEE Compliant
Contact Information
Semtech Corporation
Protection Products Division
200 Flynn Road, Camarillo, CA 93012
Phone: (805)498-2111 FAX (805)498-3804
www.semtech.com
2006 Semtech Corp.
6
相关型号：
SMDA05-6E3
Trans Voltage Suppressor Diode, 300W, 5V V(RWM), Unidirectional, 6 Element, Silicon, PLASTIC, SO-8
MICROSEMI
SMDA05-G
Trans Voltage Suppressor Diode, 300W, 5V V(RWM), Unidirectional, 4 Element, Silicon, LEAD FREE, SO-8
SENSITRON
SMDA05-LF-T13
Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Unidirectional, 4 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC
SMDA05-T13
Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Unidirectional, 4 Element, Silicon, PLASTIC, SOP-8
PROTEC
©2020 ICPDF网 联系我们和版权申明