SG-3040JC32.768KB3 [SEIKO]

CRYSTAL OSCILLATOR, CLOCK, 0.032768MHz, LVCMOS OUTPUT, ROHS COMPLIANT, SMD, 4 PIN;
SG-3040JC32.768KB3
型号: SG-3040JC32.768KB3
厂家: SEIKO EPSON CORPORATION    SEIKO EPSON CORPORATION
描述:

CRYSTAL OSCILLATOR, CLOCK, 0.032768MHz, LVCMOS OUTPUT, ROHS COMPLIANT, SMD, 4 PIN

机械 ISM频段 输出元件 振荡器
文件: 总2页 (文件大小:255K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Crystal oscillator  
Epson Toyocom  
Product Number  
SG-3030LC : Q3102LC02000100  
SG-3030JF : Q3102JF02000100  
SG-3030JC : Q3102JC02000100  
SG-3040LC : Q3103LC02000100  
SG-3040JC : Q3103JC01000100  
CRYSTAL OSCILLATOR  
32.768 kHz  
SG-3030LC  
SG-3040LC  
/
/
JF  
JC  
/
JC  
SG-3030JF  
SG-3030LC  
SG-3040LC  
SG-3030JC  
SG-3040JC  
Built-in 32.768 kHz crystal unit allows adjustment-free efficient operation.  
Use of C-MOS IC enables reduction of current consumption.  
VIO controls swing amplitude.  
Actual size  
LC Type.  
JF Type.  
JC Type.  
Specifications (characteristics)  
Specifications  
SG-3030LC / JF / JC  
Item  
Symbol  
Conditions / Remarks  
SG-3040LC / JC  
Output frequency range  
Supply voltage  
Interface power supply voltage  
Storage temperature  
Operating temperature  
Frequency tolerance  
Frequency temperature coefficient  
Frequency / voltage coefficient  
Current consumption  
Symmetry  
32.768 kHz  
f
0
VCC  
VIO  
1.5 V to 5.5 V  
1.5 V to 5.5 V  
0.9 V to 3.6 V  
0.9 V to 3.6 V  
T_stg  
T_use  
f_tol  
fo-TC  
fo-VCC  
ICC  
SYM  
VOH  
VOL  
-55 °C to +125 °C  
-40 °C to +85 °C  
5 ±23 × 10-6  
Store as bare product .  
+25 °C,VCC=3.3 V (SG-3040: VCC=1.2 V)  
-20 °C to +70 °C (+25 °C is reference)  
+25 °C  
3.3 V, No load condition  
1/2 VCC(VIO)level (SG-3040: VIO=1.2 V to 3.6 V)  
IOH=-0.4 mA (SG-3040: VIO=1.2 V to 3.6 V)  
+10 × 10-6 / -120 × 10-6  
±2 × 10-6 / V Max.  
±5 × 10-6 / V Max.  
3.1 μA Max.  
2 μA Max.  
45 % to 55 %  
VIO-0.4 V Min.  
0.4 V Max.  
Output voltage  
IOL= 0.4 mA  
CMOS load  
(SG-3040: VIO=1.2 V to 3.6 V)  
Output load condition (CMOS)  
Rise time / Fall time  
L_CMOS  
15 pF Max.  
CMOS load:20 % VCC(VIO) to 80 % VCC(VIO)level  
(SG-3040: VIO=1.2 V to 3.6 V)  
Time at minimum Supply voltage to be 0 s  
+25 °C (SG-3030: VCC= 2.0 V to 5.5 V)  
+25 °C, VCC= 3.3 V, First year  
t
r / tf  
200 ns Max.  
1 s Max.  
100 ns Max.  
3 s Max.  
Start-up time  
t_str  
Frequency aging  
f_aging  
±5 × 10-6 / year Max.  
Unless otherwise stated, characteristics (specifications) shown in the above table are based on the rated operating temperature and voltage condition.  
Block diagram  
VIO  
VCORE  
VCC  
IO  
CC  
If V function is not used, connect #1 to V  
.
VO  
V I  
RD  
CD  
OUT  
GND  
32.768 kHz  
RF  
CG  
External dimension  
(Unit:mm)  
SG-3030JF  
SG-3030JC 3040JC  
/
SG-3030LC 3040LC  
/
±0.2  
± 0.2  
Pin map  
7.1  
Pin map  
Pin  
1
2
3
3.6  
10.5 Max.  
#4 #3  
Connection  
Connection  
VCC  
N.C.  
N.C.  
N.C.  
Pin  
1
Pin  
12  
11  
10  
9
Connection  
Pin map  
Pin  
1
2
3
#3  
#4  
# 12  
# 7  
VIO  
Connection  
VIO  
GND  
OUT  
VCC  
2
N.C.  
VIO  
3
N.C.  
GND  
OUT  
VCC  
E 3040  
A123B  
SG3030 B  
E 9245A  
SG3030 B  
4
N.C.  
4
5
N.C.  
8
7
N.C.  
OUT  
4
E
8123A  
6
GND  
# 1  
# 6  
#2  
#1  
#1  
#2  
0.5  
0.22  
0.4  
(0.75)  
(0.75)  
(1.0)  
(1.0)  
5.08  
0.51  
0 Min.  
5.08  
± 0.2  
( 0.4 )  
2.8  
0.05Min.  
3.6  
0 Min.  
Metal may be exposed on the top or bottom of this product. This will not affect any quality, reliability or electrical spec.  
Footprint (Recommended)  
(Unit:mm)  
SG-3030JC 3040JC  
/
2.5  
SG-3030LC 3040LC  
/
SG-3030JF  
1.3  
1.8  
0.5  
0.27  
5.08  
2.77  
5.08  
To maintain stable operation, provide a 0.01uF to 0.1uF by-pass capacitor at a location as near as possible to the power source terminal of the crystal product (between Vcc - GND).  
http://www.epsontoyocom.co.jp  
“QMEMS” EPSON TOYOCOM  
In order to meet customer needs in a rapidly advancing digital,  
and where various types of terminals can transfer information almost  
immediately via LAN and WAN on a global scale. Epson Toyocom  
Corporation addresses every single aspect within a network environment.  
The new corporation offers “Digital Convergence” solutions to problems  
arising with products for consumer use, such as, core network systems  
and automotive systems.  
broadband and ubiquitous society, we are committed to offering products  
that are one step ahead of the market and a rank above the rest in quality.  
To achieve our goals, we follow a “3D (three device) strategy” designed to  
drive both horizontal and vertical growth. We will to grow our three device  
categories of “Timing Devices”, ”Sensing Devices” and “Optical Devices”,  
and expand vertical growth through a combination of products from these  
categories.  
A Quartz MEMS is any high added value quartz device that exploits the  
characteristics of quartz crystal material but that is produced using MEMS  
(micro-electro-mechanical system) processing technology.  
Market needs are advancing faster than previously imagined toward  
smaller, more stable crystal products, but we will stay ahead of the curve  
by rolling out products that exceed market speed and quality  
requirements. We want to further accelerate the 3D strategy by QMEMS.  
Quartz devices have become crucial in the network environment where  
products are increasingly intended for broadband, ubiquitous applications  
QMEMS and its logos are registered trademarks or trademarks of Seiko  
Epson Corporation in Japan and other countries.  
PROMOTION OF ENVIRONMENTAL MANAGEMENT SYSTEM  
CONFORMING TO INTERNATIONAL STANDARDS  
At Epson Toyocom, all environmental initiatives operate under the  
ISO 14000 is an international standard for environmental management  
Plan-Do-Check-Action(PDCA) cycle designed to achieve continuous  
improvements. The environmental management system (EMS) operates  
under the ISO 14001 environmental management standard.  
that was established by the International Standards Organization in 1996  
against the background of growing concern regarding global warming,  
destruction of the ozone layer, and global deforestation.  
All of our major manufacturing and non-manufacturing sites,in Japan  
and overseas, completed the acquisition of ISO 14001 certification.  
WORKING FOR HIGH QUALITY  
In order provide high quality and reliable products and services than  
meet customer needs,  
ISO/TS16949 is the international standard that added the sector-specific  
supplemental requirements for automotive industry based on ISO9001.  
Epson Toyocom made early efforts towards obtaining ISO9000 series  
certification and has acquired ISO9001 for all business establishments in  
Japan and abroad. We have also acquired ISO/TS 16949 certification  
that is requested strongly by major automotive manufacturers as  
standard.  
Explanation of the mark that are using it for the catalog  
Pb free.  
Complies with EU RoHS directive.  
*About the products without the Pb-free mark.  
Contains Pb in products exempted by EU RoHS directive.  
(Contains Pb in sealing glass, high melting temperature type solder or other.)  
The products have been designed for high reliability applications such as Automotive.  
Notice  
This material is subject to change without notice.  
Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Epson Toyocom.  
The information, applied circuitry, programming, usage, etc., written in this material is intended for reference only. Epson Toyocom does not  
assume any liability for the occurrence of infringing on any patent or copyright of a third party. This material does not authorize the licensing for  
any patent or intellectual copyrights.  
Any product described in this material may contain technology or the subject relating to strategic products under the control of the Foreign  
Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of International Trade and Industry or other  
approval from another government agency.  
You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon  
of mass destruction or for other military purposes. You are also requested that you would not make the products available to any third party  
who may use the products for such prohibited purposes.  
These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high  
reliability, such as the applications stated below, you must obtain permission from Epson Toyocom in advance.  
/ Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.) /  
Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security  
equipment / traffic control equipment / and others requiring equivalent reliability.  
In this document, product codes and markings will remain as previously identified prior to the merger. Due to the on-going strategy of gradual  
unification of part numbers, please review product codes and markings.  
All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies.  

相关型号:

SG-3040LC

CRYSTAL OSCILLATOR
EPSONTOYOCOM

SG-3040LC32.768KB0

CRYSTAL OSCILLATOR, CLOCK, 0.032768MHz, LVCMOS OUTPUT, ROHS COMPLIANT, SMD, 12 PIN
SEIKO

SG-3040LC32.768KB3

CRYSTAL OSCILLATOR, CLOCK, 0.032768MHz, LVCMOS OUTPUT, ROHS COMPLIANT, SMD, 12 PIN
SEIKO

SG-310

CRYSTAL OSCILLATOR SPXO
EPSONTOYOCOM

SG-310SCF

CRYSTAL OSCILLATOR SPXO
EPSONTOYOCOM

SG-310SCF 10.0000MB

OSC XO 10MHZ CMOS SMD
EPSON

SG-310SCF 10.0000MC0

OSC XO 10.000MHZ CMOS SMD
EPSON

SG-310SCF 10.0000ML

OSC XO 10MHZ CMOS SMD
EPSON

SG-310SCF 10.0000ML0

OSC XO 10.000MHZ CMOS SMD
EPSON

SG-310SCF 10.0000ML3

OSC XO 10.000MHZ CMOS SMD
EPSON

SG-310SCF 10.0000MM

OSC XO 10MHZ CMOS SMD
EPSON

SG-310SCF 10.0000MM0

OSC XO 10.000MHZ CMOS SMD
EPSON