KP01.1164.42 [SCHURTER]

Mains Power Connector, Male, Solder Terminal;


型号：	KP01.1164.42
厂家：	SCHURTER INC.
描述：	Mains Power Connector, Male, Solder Terminal
文件：	总2页 (文件大小：141K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Pcb Mount, Snap-in or Screw-on • AC Inlet • AC Outlet

On / off Line Switch • Fuseholder for 5 x 20mm Fuses

COMBIFIT

Complete MULTIFIT family on page 10

NEW

• Power entry module with line switch, fuseholder or inlet/outlet

• For “cold” connections 65° C, Protection Class I.

• Pcb mount with snap-in or screw-on feet (self-tapping M3 screws

provided, ø 3 x 8mm)

• Panel mount from rear or "sandwich" between top and bottom / side to

side panels

AC inlet / switch

• Single or double pole shocksafe fuseholder according to IEC 65/VDE

0860 for 5 x 20mm fuses

• Integral 1-pole SPST on/off line switch or 2-pole DPST switch (70A/3-

4ms in-rush max.; 10,000 cycles lifetime)

• Insulation cover in back protects against inadvertant electric contact

• Ground terminal solder/quick-connect .187 x .032" (4.8 x 0.8mm) or

.250 x .032" (6.3 x 0.8mm)

• 0.5 Nm screw torque required for screw-on type

• Max. power dissipation 3.2 watts (1-pole fusing) or 5 watts (2-pole fusing)

according to IEC 127-6. For additional values P_vin function of T_amb, see

page 6.

• For materials, options and accessories please see page 23

• For inlets with piggy-back fuse clips see GSF, page 13

Medical

Fusedrawer

AC inlet / fuseholder

Inlet / switch

Inlet / outlet

CSA

VDE

recognition

certification

approval

10A/250V¹⁾File #E96454

10A/250V¹⁾File #LR38456

10A/250V²⁾File #83482

10A/250V²⁾

10A/250V File #E103791

10A/250V File #LR38456

10A/250V File #83482

10A/250V

File

numbers

on request

SEMKO approval

SEV

approval

10A/250V²⁾

¹⁾10A/250V approval with ¹/2 HP; 10A/125V approval with ¹/3 HP

²⁾4A inductive load

Inlet / fuseholder

recognitation 10A/250V File #E93617

CSA

VDE

certification

approval

10A/250V File #LR38456

10A/250V File #83482

SEMKO approval

SEV approval

10A/250V

File numbers

on request

AC inlet / outlet

Optional “back-pack”

FILTERFIT (see pg. 45)

Optional “back-pack”

SURGEFIT (see pg. 45)

Standards: IEC 320/C14/F; IEC 127-6; EN 60320; EN 60127-6. Fusedrawer meets tool-

only accessibility requirements of medical standards IEC 601-1, BS5724 part 1, DIN/VDE

0750 part 1.

Cascading multi-function design

streamlines packaging

Snap-in pcb mounting

Screw-on pcb mounting

see next page for drilling diagram and panel cut-out

Phone 707-778-6311 • Fax 707-778-6401 • E-mail 73024.2314@compuserve.com • Website http://www.schurterinc.com

Continued ➠

COMBIFIT continued

Printed circuit board mounting

Order Numbers

KP01. 1 X X X . X X

Ground Terminal

= protection class II, without ground

1* = protection class I, solder/quick-connect

4.8 x 0.8mm, in connector axis

= protection class I, solder/quick-connect

6.3 x 0.8mm, in connector axis

= protection class I, solder/quick-connect

4.8 x 0.8mm, 90˚ to connector axis

= protection class I, solder/quick-connect

6.3 x 0.8mm, 90˚ to connector axis

Stable snap feet requires

minimal insertion force

Module must lay flat on the

pcb when soldering (see

diagram below)

Line switch

0 = without switch

non-illuminated illuminated 100- 250V~

1* = black

7* = red

= white

= red

= green

= orange

8* = green

9 = orange

Screw-on mount uses self-

tapping screws

0.5 Nm torque required for

screws

Mounting

For snap-in Pcb mount (thickness 1.6 mm):

11 = slot for panel, thickness S = 1.0mm

12* = slot for panel, thickness S = 1.5 – 2.0mm

13* = slot for panel, thickness S = 2.5 – 3.0mm

14 = slot for panel, thickness S = 3.5 – 4.0mm

15 = without slot for panel fixation

For 2-pole inlet/switch,2-pole

inlet/fuseholder and inlet/outlet

For 1-pole inlet/switch and

1-pole inlet/fuseholder

Other dimensions for

2-pole modules:

d1 = 6 ± 0.05 (snap-in)

d1 = 3.6 (screw-on)

d2 = 2 ± 0.1 (screw-on)

For screw-on Pcb mount (thickness 1.2-2.5mm):

With or without self-tapping screws, ø3 x 8mm

Tolerances not marked:

≤ 15 = ± 0.05

With

52*

53*

Without

panel thickness S = 1.0mm

panel thickness S = 1.5 – 2.0mm

panel thickness S = 2.5 – 3.0mm

panel thickness S = 3.5 – 4.0mm

panel thickness S = 0

≥ 15 = ± 0.1

Panel mounting

Standard combinations

= AC inlet with ac outlet

Insertion

from behind

= AC inlet with on/off line switch, 2-pole

= AC inlet with on/off line switch, 1-pole

= AC inlet with fuseholder, 2-pole

= AC inlet with fuseholder, 1-pole

Color of Housing

1* = black

Basic Specification

KP01 = Power entry module for Pcb mounting,

SNAPFIT or SCREWFIT

* standard configuration. Contact Schurter for non-standard order minimums.

Ordering example:

KP01.1112.11

“Sandwich”

mounting with

split enclosure panels

Prtotection class I, solder/quick-connect ground

terminal 4.8 x 0.8mm in connector axis

Black unlighted rocker switch

Snap-in pcb mounting (1.6mm pcb), with bezel for

1.5-2.0mm panel

Combination ac inlet with on/off line switch (2-pole)

Black housing

Power entry module for pcb mounting

Phone 707-778-6311 • Fax 707-778-6401 • E-mail 73024.2314@compuserve.com • Website http://www.schurterinc.com

相关型号：