LA76922M [SANYO]
Signal-Processing IC with Integrated Microcontroller; 信号处理IC，集成微控制器
| 型号： | LA76922M |
| 厂家： | 
SANYO SEMICON DEVICE |
| 描述： | Signal-Processing IC with Integrated Microcontroller |
| 文件： | 总3页 (文件大小：137K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Ordering number : ENN*7965
Monolithic Linear IC
LA76922M
Signal-Processing IC with Integrated
Microcontroller
Overview
The LA76922M is I2C bus controller ICs that support the NTSC format and aim for rationalization of color TV set design,
improved manufacturability, and lower total costs.
Features
• Black stretch, sharpness control with coring on/off control, built-in variable Y system filters
(Y-DL and chrominance trap)
• Chrominance bandpass filter, demodulation angle control, CbCr input
• E/W support
• VM output
• Audio and video switching : three systems
• Built-in microcontroller video, chrominance, and deflection signal processing
• Adjustment-free horizontal resonator system
• Simplified SG
• Supply voltage : V
= 11V (built-in reference voltage for 5.7V and 8.5V regulators)
CC
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
N2206 / 82504 JO IM No.7965-1/3
LA76922M
Package Dimensions
unit : mm
3174A
Block Diagram
No.7965-2/3
LA76922M
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the
performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted
in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer's
products or equipment.
SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any
and all semiconductor products fail with some probability. It is possible that these probabilistic failures
could give rise to accidents or events that could endanger human lives, that could give rise to smoke or
fire, or that could cause damage to other property. When designing equipment, adopt safety measures
so that these kinds of accidents or events cannot occur. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO Semiconductor products (including technical data,services) described
or contained herein are controlled under any of applicable local export control laws and regulations, such
products must not be exported without obtaining the export license from the authorities concerned in
accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO Semiconductor product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and
reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual
property rights or other rights of third parties.
This catalog provides information as of August, 2004. Specifications and information herein are subject
to change without notice.
PS No.7965-3/3
相关型号：
©2020 ICPDF网 联系我们和版权申明