QTE-014-02-L-D-DP-LC [SAMTEC]
Board Connector, 28 Contact(s), 2 Row(s), Male, Straight, 0.031 inch Pitch, Surface Mount Terminal, Locking, Black Insulator;
| 型号： | QTE-014-02-L-D-DP-LC |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 28 Contact(s), 2 Row(s), Male, Straight, 0.031 inch Pitch, Surface Mount Terminal, Locking, Black Insulator PC 连接器 |
| 文件： | 总5页 (文件大小：910K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
X
= ASO ONLY (APPLICATION SPECIFIC ORDER)
REVISION AP
QTE-XXX-XX-XXX-D-DP-XXX
OPTION
No OF POSITIONS
-A: ALIGNMENT PINS
-014, -028, -042,
-LC: LOCKING CLIPS(SEE NOTE 13)
(USE LC-08-TM-01)
DO NOT
SCALE FROM
THIS PRINT
*-056,*-070
(PER ROW)
(SEE FIG 2, SHT 2)
(*SEE NOTE 15)
-K: POLYIMIDE FILM
(USE K-DOT-.276-.375-.005)
(SEE FIG 3, SHT 2)
LEAD STYLE
-01: .1680 [4.267] (SEE FIG 1)
-02: .2861 [7.264] (SEE FIG 1)
-03: .4042 [1.123] (SEE FIG 1)
-04: .600[15.24]
(N/A ON STYLES -07 & -08)
-GP: GUIDE POSTS
(AVAILABLE ON -01 ONLY)
(USE QTE-20-01-D-XX-X-GP)
(SEE FIG 4, SHT 3)
X
X
X
(SEE FIG 4, SHT 3)
-05: .718[18.237]
-TR: TAPE & REEL (42 POS. MAX)
(NOT AVAILABLE ON -05, -06,
-07, -08 LEAD STYLES)
(SEE FIG 4, SHT 3)
-06: .835[21.209]
(SEE FIG 4, SHT 3)
(028 POS MAX FOR -GP OPTION)
-RT1: RETENTION OPTION (SEE FIG 9, SHT 5)
(ONLY AVAILABLE ON -01 LEAD STYLE)
(MUST USE -A OPTION)
* = SEE NOTE 15
X
X
-07: .954[24.232]
X -08: 1.151[29.24]
-09: .522[13.258]
(USE QTE-20-01-D-XX-A-RT1 & T-1R36-01-F)
(NOT AVAILABLE WITH -LC, -GP, OR -L)
(NOT AVAILABLE ON -056 & -070 POS)
-L: LATCHING OPTION (28 POS. MAX.)
(SEE FIG 10, SHT 5) (MUST USE -A OPTION)
(AVAILABLE ON -01 ONLY)
(NOT AVAILABLE WITH -LC, -GP, OR -RT1)
X -10: .5606[14.239]
* = SEE NOTE 15
C
PLATING SPECIFICATION
"A" REF
-F: 3µ" FLASH GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.7875 20.003 (TYP)
.032 0.80 REF
(USE T-1SXX-XX-F, T-1G1-XX-F) (SEE NOTE 9)
-L: 10µ" LIGHT GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
01
BODY STYLE
-DP: DIFFERENTIAL PAIRS
ROW SPECIFICATION
-D: DOUBLE (USE QTE-20-XX-D-XX
(USE T-1SXX-XX-L, T-1G1-XX-L)
.155 3.94 REF
(SEE NOTE 14)
.235 5.97
REF
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
(USE T-1SXX-XX-H, T-1G1-XX-G)
-C: 50µ" ELECTRO-POLISHED SELECTIVE IN
CONTACT AREA, MATTE TIN ON TAIL
(USE T-1SXX-XX-C, T-1G1-XX-L)
02
.033 0.84
REF
& QTEH-20-XX-D-XX )
.645 16.38
.008 0.20 REF
REF
No OF BANKS
6 EQ SPCS
@ .0945[2.400]
=.567[14.40]
(TYP)
-STL: 30µ" HEAVY SELECTIVE GOLD IN
CONTACT AREA, TIN LEAD ON TAIL
(USE T-1SXX-XX-STL, T-1G1-XX-STL)
-FTL: 3µ" FLASH SELECTIVE GOLD IN
CONTACT AREA, TIN LEAD ON TAIL
(USE T-1SXX-XX-FTL, T-1G1-XX-FTL)
QTE-20-01-D-XX-A
"A"
.036 0.91
REF
"C" REF
"A"
T-1SXX-XX-XXX
(SEE TABLE 1)
.745 18.92 REF
"D" REF
C
+.003[0.08]
-.002
.155±.005 3.94±0.13
"B"
[0.05]
T-1G1-01-XXX
(SEE NOTE 14)
(SEE NOTE 5, 6 & 10)
.080 2.03
REF
C
C
.006 0.15
REF
SEE TABLE 2
'B'
(SEE NOTE 10)
.035 0.89 REF
.035 0.90 REF
.280 7.11
NOTES:
.015 0.38 REF
C
1.
REPRESENTS A CRITICAL DIMENSION.
FIG 1
DETAIL 'B'
SCALE 6 : 1
2. MINIMUM TERMINAL RETENTION: 5 OZ.
3. MINIMUM GROUND PLANE RETENTION: 1 LB
4. PARTS TO BE MOLDED TO POSITION.
5. MAXIMUM VARIANCE OF .002 [0.05]
6. DIMENSION APPLIES TO TERMINALS AND GROUND PLANE.
7. DELETED.
8. DELETED.
-A: ALIGNMENT PIN OPTION
(QTE-042-01-XXX-D-DP-A SHOWN)
(STYLE -01, -02 & -03 ONLY)
SECTION "A"-"A"
UNLESS OTHERWISE SPECIFIED,
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
9. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
10. GROUND PLANE PRESS HEIGHT MUST BE .003[0.08] LESS THAN THE MAX HEIGHT
OR .001[0.03] GREATER THAN THE MINIMUM HEIGHT OF THE TERMINALS.
11. T-1R36 RETENTION TO BODY TO BE 1.0 LBF.
DECIMALS
ANGLES
2
.XX: .01[.3]
.XXX: .005[.13]
.XXXX: .0020[.051]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
12. NOTE DELETED.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
13. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION IS
NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL
PLACEMENT FOR ALL ASSEMBLIES WITH THE –LC OPTION.
14. MAXIMUM PIN CAN EXTEND PAST WALL: .003[0.08]
15. AVAILABLE FOR EXISTING CUSTOMERS ONLY.
.8mm DIFFERENTIAL PAIRS HS TERMINAL ASSEMBLY
INSULATOR: LCP, UL94V-0; COLOR: BLACK
TERMINAL: PHOS BRONZE
GROUND PLANE: PHOS BRONZE
DWG. NO.
QTE-XXX-XX-XXX-D-DP-XXX
C
DEAN P
4/28/2000
SHEET 1 OF 5
BY:
F:\DWG\MISC\MKTG\QTE-XXX-XX-XXX-D-DP-XXX-MKT.SLDDRW
REVISION AP
QTE-20-01-D-XX
C
L
.055 1.40
LC-08-TM-01
.056 1.42 REF
.0800 2.032
.010 0.25 REF
"D"±.003[0.08]
(SEE TABLE 3, SHT 1)
FIG 2
-LC: LOCKING CLIP OPTION
(QTS-042-01-XXX-D-DP-LC SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
* = SEE NOTE 15
"R" REF
"T"
"S"±.020[0.51]
.021±.010 0.521±0.25
.276 7.01
FIG 3
PROPRIETARY NOTE
-K: POLYIMIDE FILM PAD
(USE K-DOT-.276-.375-.005)
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.8mm DIFFERENTIAL PAIRS HS TERMINAL ASSEMBLY
DWG. NO.
QTE-XXX-XX-XXX-D-DP-XXX
BY:
DEAN P
4/28/2000
SHEET 2 OF 5
F:\DWG\MISC\MKTG\QTE-XXX-XX-XXX-D-DP-XXX-MKT.SLDDRW
REVISION AP
"E" REF
"F" REF
.3630 9.220
.300 7.62
REF
C
L
.125 3.18 REF
QTE-20-01-D-XX-X-GP
FIG 4
-GP: GUIDE POST OPTION
(QTE-042-01-XXX-D-DP-GP SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(AVAILABLE ON STYLE -01 ONLY)
* = SEE NOTE 15
QTE-20-03-D-XX-A
(-LC BODY MAY BE USED TO SUBSTITUTE)
C
L
.038 0.95
REF
.080 2.03 REF
QTEH-20-XX-D-XX-A
.035 0.89 REF
"D" REF
(SEE TABLE 3, SHT 1)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
FIG 5
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
(QTE-020-04-XXX-D-A SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(STYLES -04, -05, -06, -07, -08, -09 & -10, SEE TABLE 7, SHT 4)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.8mm DIFFERENTIAL PAIRS HS TERMINAL ASSEMBLY
DWG.
QNTOE. -XXX-XX-XXX-D-DP-XXX
DEAN P
4/28/2000
SHEET 3 OF 5
BY:
F:\DWG\MISC\MKTG\QTE-XXX-XX-XXX-D-DP-XXX-MKT.SLDDRW
REVISION AP
01
02
QTE-20-03-D-XX-A
(-LC BODY MAY BE USED TO SUBSTITUTE)
"C"
C
T-1S41-XX-XXX
[0.08]
[0.03]
+.003
-.001
.396 10.06 REF
.055 1.40
"B"
(SEE NOTES
5, 6 & 10)
C
SEE TABLE 2, SHT 1
(SEE NOTE 10)
"C"
T-1G1-XX-X
.281 7.14
FIG 6
QTE-042-04-X-D-DP-LC SHOWN
QTEH-20-XX-D-XX
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(STYLES -04, -05 & -06)
SECTION "C"-"C"
.010 0.25 REF
.278 7.06 REF
.0800 2.032
T-1S60-XX-XXX
.265 6.73
REF
QTE-20-02-D-XX-A
"E"
"E"
C
[0.08]
+.003
"B"
-.001 [0.03]
(SEE NOTES
5, 6 & 10)
QTEH-20-01-D-XX-A
T-1G1-XX-XXX
.118 3.00
REF
T-1S61-XX-XXX
.278 7.06 REF
"D"
SECTION "E"-"E"
SCALE 1.25 : 1
QTE-20-02-D-XX-A
FIG 8
QTE-042-09-X-D-DP-A SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)
(STYLES -09 & -10)
C
[0.08]
+.003
"B"
-.001[0.03]
(SEE NOTES
5, 6 & 10)
F:\DWG\MISC\MKTG\QTE-XXX-XX-XXX-D-DP-XXX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
"D"
T-1G17-XX-XXX
QTEH-20-04-D-XX-A
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.600 15.24 REF
SECTION "D"-"D"
SCALE 1.25 : 1
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
.8mm DIFFERENTIAL PAIRS HS TERMINAL ASSEMBLY
FIG 7
NO.
DQWG.TE-XXX-XX-XXX-D-DP-XXX
QTE-042-07-X-D-DP-A SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)
(STYLES -07 & -08)
SHEET 4 OF 5
BY:
DEAN P
4/28/2000
REVISION AP
"G" REF
* = SEE NOTE 15
QTE-20-01-D-XX-A-RT1
C
C
.190 4.83
(SEE NOTE 11)
"H"±.004[0.10]
.069 1.76
REF
.100 2.54
.062 1.57
REF
T-1R36-01-F (2 PLCS)
FIG 9
.070 1.78
REF
-RT1: RETENTION OPTION
(QTE-042-01-XXX-D-DP-A-RT1 SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(ONLY AVAILABLE ON -01 LEAD STYLE)(MUST USE -A OPTION)
(NOT AVAILABLE WITH -LC, -GP, OR -L OPTIONS)
(NOT AVAILABLE ON *-056 & *-070 POSITIONS)
* = SEE NOTES 12 & 15
"J" REF
* = SEE NOTE 15
C
"K"
C
L
.020 0.51
QTE-20-01-D-XX-A-L
CRITICAL DIMENSION INSPECTION INSTRUCTION TABLE
REF
C
ASSEMBLY OPERATION
FILL T-1SXX
IN PROCESS INSPECTION
.0530 1.346
C1, C2, C3, C4, C5, C11, C12
ADD -LC OPTION
ADD -RT1 OPTION
ADD -L OPTION
ADD -K OPTION
C13
.025 0.64
REF
C6, C7
WT-56-01-T
.010 0.25 REF
C8, C9, C10
C14, C15
"L"
C
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
FIG 10
520 PARK EAST BLVD, NEW ALBANY, IN 47150
-L: LATCHING OPTION
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
(QTE-028-01-XXX-D-DP-A-L SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(28 POS MAX) (MUST USE -A OPTION)
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.8mm DIFFERENTIAL PAIRS HS TERMINAL ASSEMBLY
(AVAILABLE ON -01 LEAD SYTLE ONLY)
(NOT AVAILABLE WITH -LC, -GP, OR -RT1)
DWG. NO.
QTE-XXX-XX-XXX-D-DP-XXX
SHEET 5 OF 5
BY:
DEAN P
4/28/2000
F:\DWG\MISC\MKTG\QTE-XXX-XX-XXX-D-DP-XXX-MKT.SLDDRW
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明