MMT-136-02-F-DH-001-K [SAMTEC]
Board Connector, 71 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,;
| 型号： | MMT-136-02-F-DH-001-K |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 71 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal, |
| 文件： | 总6页 (文件大小：480K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NOTES:
REVISION DN
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
1. C REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 2 LB.
OPTION
3. FOR NON -LC & -A, USE 2TS-XX-D.
-TR: TAPE AND REEL
(37 POSTION MAX)
(SEE SHT 5)
4. COPLANARITY TO INCLUDE INSULATOR.
No OF POSITIONS
-02 THRU -50 (PER ROW)
5. MAXIMUM BURR ALLOWANCE: .002[0.05].
6. MAXIMUM CUT FLASH: .015[0.38]. (NO FLASH TO BE ON BOTTOM OF BODY).
7. -MT OPTION: PIN B TO BE FLUSH TO +/- .003" A LINE MADE BY THE BODY
-DH OPTION: PIN A TO BE FLUSH TO .003" ABOVE A LINE MADE BY THE BODY
PIN B TO BE FLUSH TO .001" BELOW/.003" ABOVE A LINE MADE BY THE BODY
-SH OPTION: PIN A TO BE FLUSH TO +/- .003" A LINE MADE BY THE BODY.
DO NOT
SCALE FROM
THIS PRINT
PAD OPTION
-P: PICK & PLACE PAD
(USE PPP-13)
LEAD STYLE
-01: .126 [3.20] POST
-02: .175 [4.45] POST
(SEE TABLE 2)
(2 POSITION MINIMUM)
-K: POLYIMIDE FILM PAD
(SEE FIG 14, SHT 6)
(3 POS MIN)
C
8. ORIENTATE PINS TO REDUCE THE NUMBER OF BANDOLIER MARKS IN THE
POST AREA. (SEE TABLE 4)
9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED. THE -LC
OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC
RECOMMENDS MANUAL PLACEMENTFOR ALL ASSEMBLIES WITH
THE -LC OPTION.
10. NOTE DELETED.
(USE K-DOT-.177-.281-.005)
OPTION
PLATING SPECIFICATION
-XXX: POLARIZED POSITION
-XXX SPECIFIES POSITION OMITTED
(SEE POLARIZATION VIEW)
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE IN ON TAIL
OPTION (SEE NOTE 3)
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-LC: LOCKING CLIP (SEE NOTE 9)
(FOR -DH USE 2TS-XX-DH-LC-XX)
(FOR -SH USE 2TS-XX-SH)
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(NOT AVAILABLE WITH -A)
-A: ALIGNMENT PIN
-T: MATTE TIN CONTACT AND TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(FOR -DH USE 2TS-XX-DH-A-XX)
(FOR -SH USE 2TS-XX-SH-A-XX)
(NOT AVAILABLE WITH -LC)
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
ROW OPTION
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-SH: SINGLE (2TS-XX-SH-X-XX)
+.005 [0.13]
- .010 [0.25]
-TM: MATTE TIN CONTACT AND TAIL
-DH: DOUBLE (2TS-XX-DH-XX-XX)
(NO. OF POS x .07874[2.0000])
-MT: MIXED TECHNOLOGY (2TS-XX-DH-XX-XX)
(NOT AVAILABLE WITH -LC, OR -A OPTIONS)
(NO OF POS - 1) x .07874[2.0000])
.003[0.08]
2
MAX SWAY
02
(EITHER DIRECTION)
.0787 2.000
.15748 4.0000
REF
.055 1.40
2TS-XX-DH-XX-XX
01
SEE NOTE 6
LC-06-TM
.0197 0.500 SQ
(TYP) REF
.11 2.8
"C"
(SEE TABLE 2)
.245±.010 6.22±0.254
SEE NOTE 5
0
3°
.003 0.08 MAX
(SEE NOTE 7)
C
C
SEE TABLE 5
(SEE NOTE 4)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
ANGLES
5
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SMATEC.com code 55322
SEE NOTE 5
.XXX: .005 [.13]
(NO. OF POS x .07874[2.0000]
- .15748[4.0000]) .003[0.08]
.XXXX: .0020 [.051]
SHEET SCALE: 4:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: LCP VECTRA;
UL 94 V0;
2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM
DWG. NO.
COLOR: BLACK
TERMINAL: PHOS BRONZE
FIG 1
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
MMT-108-01-X-DH-LC SHOWN
BY:
DEAN P
12/12/2000 SHEET 1 OF 6
F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW
REVISION DN
.07874 2.0000 REF
SEE NOTE 6
2TS-XX-SH-X
01
.043 1.09
REF
2
MAX SWAY
(EITHER DIRECTION)
"C"
.060 1.52 REF
(SEE TABLE 2, SHT 1)
.07874 2.000 REF
.11 2.8
.050 1.27 REF
(NO. OF POS x .07874[2.0000]
- .15748[4.0000]) .003[0.08]
5°
C
0
C
.006[0.15]
(SEE NOTE 4)
F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
FIG 2
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
MMT-108-01-X-SH-A SHOWN
2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM
DWG. NO.
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
BY:
DEAN P
12/12/2000 SHEET 2 OF 6
REVISION DN
50
01
C
L
90°
02
01
.050 1.27
36/100
35/99
.100±.010 2.53±0.25
FIG 3
FIG 4
-MT: MIXED TECHNOLOGY
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
POLARIZATION VIEW
((NO. OF POS. X .07874 [2.000])/2 - "E") .010[0.25]
PIN A (-DH)
.300 7.62 REF
"E"
.157 4.00
PPP-13
.250 6.35
REF
PIN A (-SH)
PPP-13
-SH
C
-DH
L
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
FIG 5
-P: PICK & PLACE PAD OPTION
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail info@SMATEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM
DWG. NO.
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW
BY:
DEAN P
12/12/2000 SHEET 3 OF 6
REVISION DN
90°
"C"
"C"
(SEE TABLE 2, SHT 1)
"C"
(SEE TABLE 2, SHT 1)
(SEE TABLE 2, SHT 1)
.11 2.8
.050 1.27
.100 2.53
"D"
"D"
.113 2.87
(SEE TABLE 2, SHT 1)
(SEE TABLE 2, SHT 1)
-MT
-MT
-SH
-DH
-DH & MT
FIG 7
FIG 6
IN-PROCESS 2
IN-PROCESS 1
-DH
FIG 8
IN-PROCESS 3
.295 7.49
.295 7.49
"D"
(SEE TABLE 2, SHT 1)
"D"
(SEE TABLE 2, SHT 1)
-DH
-MT
-DH
-MT
FIG 10
FIG 9
IN-PROCESS 5
IN-PROCESS 4
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SMATEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM
DWG. NO.
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW
BY:
DEAN P
12/12/2000 SHEET 4 OF 6
POST TO RIGHT
ROUND HOLES
REVISION DN
.245 6.22
.245 6.22
OBLONG HOLES
USER DIRECTION OF UN-REELING
POCKET NOT DETAILED
NOTE: PARTS MUST BE ORIENTED PER THE DESIGN OF THE POCKET TOOL.
POCKETS DESIGNED AFTER REVISION BW MUST ORIENT PARTS PER THIS VIEW.
FIG 12
-TR TAPE AND REEL VIEW
(DRAWING NOT DETAILED)
-DH
-MT
FIG 11
IN-PROCESS 6
F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SMATEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM
DWG. NO.
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
BY:
DEAN P
12/12/2000 SHEET 5 OF 6
REVISION DN
POST AREA
C
(SEE NOTE 8)
(SEE TABLE 4)
"C" REF
(SEE TABLE 2, SHT 1)
.075 1.905 REF
NOTES:
BANDOLIER
REF
LOAD ALL PARTS (EXCEPT THOSE WITH -SH OPTION) POS 1 FIRST IN
SAME DIRECTION AS ARROW.
FOR 2 & 3 POSITIONS, TUBE PACKAGING ONLY AVAILABLE WITH
-P OPTION. 2 & 3 POSITIONS WITHOUT -P OPTIONS MUST BE LAYER
PACKAGED. ALL OTHERS, TUBE AS SHOWN.
TAIL AREA
PACKAGE PARTS AS SHOWN
PT-1-24-06-15
PT-1-24-06-17
PT-MMT002-SH
FIG 13
-T PLATING ONLY
PT-1-24-04-17
"R"
.049±.020 1.25±0.51
(SEE NOTE )
.162 4.13
"S"
(SEE NOTE )
.084 2.13
PT-MMT001-DH-P
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
.177 4.50 REF
-SH
-DH
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SMATEC.com code 55322
DESCRIPTION:
NOTE: "R" = USED MEASURED DIMENSION (REF)
"S" = {("R" - .177 [4.50]) / 2} ±.020 [0.51]
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM
DWG. NO.
FIG 14
-K: POLYIMIDE FILM PAD
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW
BY:
DEAN P
12/12/2000 SHEET 6 OF 6
相关型号：
MMT-136-02-F-DH-001-K-P-TR
Board Connector, 71 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
MMT-136-02-F-DH-001-K-TR
Board Connector, 71 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
MMT-136-02-F-DH-003-K-P-TR
Board Connector, 71 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
MMT-136-02-F-DH-003-K-TR
Board Connector, 71 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
MMT-136-02-F-DH-005-K
Board Connector, 71 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
MMT-136-02-F-DH-A-002-P-TR
Board Connector, 71 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
MMT-136-02-F-DH-A-003
Board Connector, 71 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
MMT-136-02-F-DH-A-004-P
Board Connector, 71 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
MMT-136-02-F-DH-LC-005-TR
Board Connector, 71 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
©2020 ICPDF网 联系我们和版权申明