EEDP-008-40.00-LV1-RA2-2 [SAMTEC]
Interconnection Device, LEAD FREE;
| 型号： | EEDP-008-40.00-LV1-RA2-2 |
| 厂家： | 
SAMTEC |
| 描述： | Interconnection Device, LEAD FREE 连接器 |
| 文件： | 总8页 (文件大小：1357K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION H
EEDP-XXX-XX.XX-XXX-XXX-X
THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
WIRING OPTION
Pb
-1: PIN 1 TO PIN 1
No OF PAIRS
-2: PIN 1 TO PIN 2
-008, -016, -024 (SEE SHEET 5), -032
-3: PIN 1 TO PIN N-1
-4: PIN 1 TO PIN N
(SEE TABLE 8, SHEET 7)
SUB-PCB-0453-EEDP-XXX-EC-S
(SEE NOTE 7)
(SEE TABLE 3, SHEET 4 FOR
-008, -016, -032; SEE
TABLE 5, SHEET 5 FOR -024)
LENGTH: XX.XX + .734[18.64] REF
LENGTH
C1
-XX.XX (INCHES)
(06.00[152.4] MIN -
40.00[1016.0] MAX)
N
LENGTH: XX.XX .050[1.27]
DO NOT
SCALE FROM
THIS PRINT
(SEE TABLE 2)
(CABLE LENGTH)
SECOND END
(SEE NOTE 2)
02
-DV1: DOUBLE VERTICAL
-DV2: DOUBLE VERTICAL (FLIPPED)
-DS1: DV1 WITH CAPTIVE PANEL SCREWS
-DS2: DV2 WITH CAPTIVE PANEL SCREWS
-RA1: RIGHT ANGLE (SHROUD UP)
-RA2: RIGHT ANGLE (SHROUD DOWN)
-RS1: RA1 WITH CAPTIVE PANEL SCREWS
-RS2: RA2 WITH CAPTIVE PANEL SCREWS
-LV1: DV1 WITH LATCHES (SEE SHEET 6)
-LV2: DV2 WITH LATCHES (SEE SHEET 6)
-RL1: RIGHT ANGLE W/ LACTHES (SHROUD UP)
-RL2: RIGHT ANGLE W/ LACTHES (SHROUD DOWN)
FIRST END
-DV1: DOUBLE VERTICAL
'A'
-DV2: DOUBLE VERTICAL (FLIPPED)
-DS1: DV1 WITH CAPTIVE PANEL SCREWS
-DS2: DV2 WITH CAPTIVE PANEL SCREWS
-RA1: RIGHT ANGLE (SHROUD UP)
-RA2: RIGHT ANGLE (SHROUD DOWN)
-RS1: RA1 WITH CAPTIVE PANEL SCREWS
"A"
REF
"B"
REF
"C"
REF
C
L
-RS2: RA2 WITH CAPTIVE PANEL SCREWS
-LV1: DV1 WITH LATCHES (SEE SHEET 6)
-LV2: DV2 WITH LATCHES (SEE SHEET 6)
(SEE SHEET 3)(SEE TABLE 9, SHEET 7)
-RL1: RIGHT ANGLE W/ LACTHES (SHROUD UP)
-RL2: RIGHT ANGLE W/ LACTHES (SHROUD DOWN)
(SEE SHEET 2)(SEE TABLE 9, SHEET 7)
HDRL-11
(SEE NOTE 5)
N
02
(SEE TABLE 2)
SECOND END
FIRST END
.647 16.43 REF
LENGTH REF
EDP-XX-01-SRD (TYP)
SUB-TTS-XX-01-080-XX.XX (TYP)
.252 6.40 REF (TYP)
FIG. 1
.062 1.57
REF
EEDP-016-XX.XX-3-DV1-RA1 SHOWN
EDP-XX-01
.540 13.72
REF (TYP)
01
.345 8.76 REF
N-1
(SEE TABLE 2)
NOTES:
DETAIL 'A'
C
1.
REPRESENTS A CRITICAL DIMENSION.
SCALE 2.5 : 1
2. SUB-TTS LENGTH IS EQUAL TO EEDP LENGTH.
C2
3. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED
FOR SHORTS AND OPENS.
.157 4.00 REF
(SEE NOTE 8)
'B'
C3 4. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 300V.
5. TOP SUB-TTS NOT SHOWN IN THIS VIEW FOR CLARITY; HDRL-11
TO BE CENTERED ON LOWER SUB-TTS AS SHOWN; HDRL-11 IS
TO CONTAIN PART NUMBER, SHOP NUMBER, LINE NUMBER &
DATE CODE.
(SEE SHEET 6)
6. PACKAGE ASSEMBLIES IN STATIC DISSIPATION BAGS.
7. FOR PRE-TINNING PROCESSING INFORMATION ON THE SUB-PCB'S,
SEE TRAVELER SUB-PCB-0453-EEDP-"XXX".
8. KEY CONSUMES FOUR PITCHES.
9. LVX OPTION: TIGHTEN TO 1.4-1.5 IN-LBS.
01
N-1
STS-01
(TIGHTEN TO 1.4 - 1.7 IN-LBS)
(TYP)
TOLERANCES DO NOT APPLY
TO REFERENCE DIMENSIONS.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
(SEE TABLE 2)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
ANGLES
2
.XX: .01[.3]
.XXX: .005[.13]
.XXXX: .0020[.051]
SHEET SCALE: 1.25:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
TWIN-AX EDGE CARD CABLE ASSEMBLY
DWG. NO.
EEDP-XXX-XX.XX-XXX-XXX-X
BY:
BRATCHER 09/25/2003 SHEET 1 OF 8
F:\DWG\MISC\mktg\EEDP-XXX-XX.XX-XXX-XXX-X-MKT.SLDDRW
FIRST END - (SEE TABLE 3, SHEET 4 FOR -008, -016 & -032; SEE TABLE 5, SHEET 5 FOR -024)
REVISION H
-RA1
-RA2
-DV2
-DV1
N-1
N
02
01
01
02
N-1
N
N
N-1
01
N
02
N-1
01
02
-DS2
-RS1
-RS2
-DS1
01
N-1
02
N
02
N-1
N
01
N-1
N
N
01
N-1
02
01
02
-RL1
-RL2
02
N
01
N
N-1
01
-LV2
-LV1
02
01
N-1
N-1
N
02
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
N
N-1
01
02
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:2
TWIN-AX EDGE CARD CABLE ASSEMBLY
DWG. NO.
EEDP-XXX-XX.XX-XXX-XXX-X
F:\DWG\MISC\mktg\EEDP-XXX-XX.XX-XXX-XXX-X-MKT.SLDDRW
BY:
BRATCHER 09/25/2003 SHEET 2 OF 8
SECOND END - (SEE TABLE 3, SHEET 4 FOR -008, -016 & -032; SEE TABLE 5, SHEET 5 FOR -024)
REVISION H
-RA1
-RA2
-DV2
-DV1
02
01
N
N-1
02
N-1
N
01
01
01
02
02
N
N-1
N
N-1
-RS1
-DS2
-DS1
-RS2
02
N
N-1
01
02
01
01
N-1
01
N
02
02
N
N-1
N-1
N
-RL2
-RL1
N-1
01
N
02
01
-LV1
-LV2
02
02
01
N-1
N
N
N-1
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
01
02
N
N-1
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:2
TWIN-AX EDGE CARD CABLE ASSEMBLY
DWG. NO.
EEDP-XXX-XX.XX-XXX-XXX-X
F:\DWG\MISC\mktg\EEDP-XXX-XX.XX-XXX-XXX-X-MKT.SLDDRW
BY:
BRATCHER 09/25/2003 SHEET 3 OF 8
REVISION H
CPS-4-40-01-X (TYP)
FIG. 3
"D"
REF
"E"
REF
"F"
REF
C
L
-RSX: RIGHT ANGLE WITH CAPTIVE PANEL SCREWS
FIG. 2
(EEDP-016-XX.XX-X-RS1-XXX SHOWN)
(SAME AS FIG. 2, UNLESS OTHERWISE STATED)
-DSX: DOUBLE VERTICAL WITH CAPTIVE PANEL SCREWS
(EEDP-016-XX.XX-X-DS1-XXX SHOWN)
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
.500 12.70 REF (TYP)
(FULLY TIGHTENED)
EDP-XX-01-CPS (TYP)
C
L
C
L
EDP-XX-01-CPS
C
L
EDP-XX-01-RAS
F:\DWG\MISC\mktg\EEDP-XXX-XX.XX-XXX-XXX-X-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
TWIN-AX EDGE CARD CABLE ASSEMBLY
DWG. NO.
EEDP-XXX-XX.XX-XXX-XXX-X
BY:
BRATCHER 09/25/2003 SHEET 4 OF 8
FIG. 4
-024 PAIRS
REVISION H
SUB-TTS-08-01-080-XX.XX (2 PLCS)
EEDP-024-XX.XX-2-DV1-RA2 SHOWN
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
74
73
HDRL-11
(SEE NOTE 5)
"B" REF
(SEE TABLE 1,
SHEET 1)
"C" REF
(SEE TABLE 1,
SHEET 1)
"A" REF
(SEE TABLE 1,
SHEET 1)
01
02
SUB-TTS-04-01-080-XX.XX (2 PLCS)
F:\DWG\MISC\mktg\EEDP-XXX-XX.XX-XXX-XXX-X-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.25:1
TWIN-AX EDGE CARD CABLE ASSEMBLY
DWG. NO.
EEDP-XXX-XX.XX-XXX-XXX-X
BY:
BRATCHER 09/25/2003 SHEET 5 OF 8
IN-PROCESS 1
REVISION H
ADD LTCB-XX TO LTC-03-X
LTC-03-L
LTC-03-R
FIG. 5
-LVX: DOUBLE VERTICAL WITH LATCHES
(EEDP-016-XX.XX-X-LV1-XXX SHOWN)
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
LTCB-XX
.354 9.00
1.340 34.04
LTCB-XX
IN-PROCESS 2
C4
"G"
REF
"H"
REF
"J" .006
LEDP-XX-01-T
STS-01
TIGHTEN TO 1.4-1.5 IN-LBS.
(TYP)
(SEE NOTE 9)
LEDP-XX-01-B
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.25:1
TWIN-AX EDGE CARD CABLE ASSEMBLY
DEWGE. NDO. P-XXX-XX.XX-XXX-XXX-X
F:\DWG\MISC\mktg\EEDP-XXX-XX.XX-XXX-XXX-X-MKT.SLDDRW
BY:
BRATCHER 09/25/2003 SHEET 6 OF 8
REVISION H
H
.017 0.43 REF
GROUND
SIGNAL
DETAIL 'B'
SCALE 5 : 1
(SEE TABLE 6)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.25:1
TWIN-AX EDGE CARD CABLE ASSEMBLY
DWG. NO.
EEDP-XXX-XX.XX-XXX-XXX-X
F:\DWG\MISC\mktg\EEDP-XXX-XX.XX-XXX-XXX-X-MKT.SLDDRW
BY:
BRATCHER 09/25/2003 SHEET 7 OF 8
IN-PROCESS 1
REVISION H
ADD LTCB-01 TO LTC-03-X
FIG. 6
-RLX: DOUBLE VERTICAL WITH LATCHES
(EEDP-016-XX.XX-X-RL1-XXX SHOWN)
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
LTCB-01
LTC-03-L
LTC-03-R
1.340 34.04
REF
.295 7.50
LTCB-01
IN-PROCESS 2
LEDP-XX-01-R
C4
"G"
REF
"H"
REF
"J"
LEDP-XX-01-M
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.25:1
TWIN-AX EDGE CARD CABLE ASSEMBLY
DWG. NO.
EEDP-XXX-XX.XX-XXX-XXX-X
F:\DWG\MISC\mktg\EEDP-XXX-XX.XX-XXX-XXX-X-MKT.SLDDRW
BY:
BRATCHER 09/25/2003 SHEET 8 OF 8
相关型号：
©2020 ICPDF网 联系我们和版权申明