MM-1018-H [RRE]

Micro-miniature Reed Switch; 微小型磁簧开关
MM-1018-H
型号: MM-1018-H
厂家: Reed Relays and Electronics    Reed Relays and Electronics
描述:

Micro-miniature Reed Switch
微小型磁簧开关

开关 磁簧开关
文件: 总1页 (文件大小:92K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MM-1018 Micro-miniature Reed Switch  
Form A, Center Contact, Release AT Configurable  
All dimensions in mm  
This 10mm long, form A reed switch is designed for low power, high speed switching applications, and has  
a cost advantage over the UM-0018 Ultra-miniature series. The flattened lead outs are useful for orienting  
the internal blades to face one way while soldering, welding etc., for maximum in-group sensitivity, and the  
three different differential types available, cover a wide range of release specific applications. This reed  
switch is Lead (Pb) free and RoHS compliant.  
Formations Available  
Cropped  
SMD  
Welded  
Soldered  
Goal post  
L Formed  
Applications  
This reed switch is suitable for use in the following applications and many others: Microphones, reed relays,  
power showers, vibration sensors, sewing machines, automobile crash sensors, defective lamp detection,  
pressure gauges, vane sensors, fuel pumps, electric fishing reels, pedometers, board games...  
Electrical  
Sub code  
Operate Range  
Release Range  
L
10-40  
4-20  
10.0  
0.5  
0.75  
100  
70  
200  
100  
10 9  
0.2  
M
10-40  
6-25  
10.0  
0.5  
0.75  
100  
70  
200  
120  
10 9  
0.2  
H
10-40  
7.5-30  
10.0  
0.5  
0.75  
100  
70  
AT  
AT  
W/ VA  
A
Contact Rating (max)  
Switching Current (max)  
Carry Current (max)  
Switching Voltage (max)  
Switching Voltage (max)  
Breakdown Voltage  
Initial Contact Resistance (max)  
Insulation Resistance (min)  
Capacitance (min)  
A
VDC  
VAC  
VDC  
m  
  
200  
150  
10 9  
pF  
0.2  
Ordering Code  
MM-1018-(Sub Code)-(Start Operate AT)-(Finish  
Operate AT)  
Miscellaneous  
Operate Time (max)  
Bounce Time (max)  
Release Time (max)  
Resonance Frequency  
Operating Frequency  
Operating Temperature  
Test Coil  
ms  
ms  
ms  
Hz  
Hz  
°C  
0.35  
0.3  
0.15  
Example MM-1018-M-10-14  
Denotes 10-14 Operate AT band, with a minimum  
Release AT of 6.  
>2000  
500  
-40 to +120  
717 102 003  
Sn (Pb free)  
30  
Other Configurations Available  
Dynamic contact resistance limit, Higher insulation  
resistance, Special release limits, Gold plates leads  
Lead out plating  
Shock Resistance  
Vibration (10-2000Hz)  
g
g
20  
Please refer to our reed switch usage notes  
Due to continual improvement, specifications are subject to change without notice  
www.reed-sensor.com  
10 May 2008  
Reed Relays and Electronics India Limited info@reed-switch.com Tel 91-44-6528-4022  

相关型号:

MM-1018-L

Micro-miniature Reed Switch
RRE

MM-1018-M

Micro-miniature Reed Switch
RRE

MM-1208-100

Operating Voltage= 250 / 480 VAC 3 PH Wye OperatingCurrentMax= 80, 100amp
JMK

MM-1208-80

Operating Voltage= 250 / 480 VAC 3 PH Wye OperatingCurrentMax= 80, 100amp
JMK

MM-1244

The filter is designed to operate in high current applications of 48 Vdc telecommunication systems.
JMK

MM-1244-60

The filter is designed to operate in high current applications of 48 Vdc telecommunication systems.
JMK

MM-1244-85

The filter is designed to operate in high current applications of 48 Vdc telecommunication systems.
JMK

MM-1315-100

The Mm-1315-100 filter is designed for use with large computer or motor installations where heavy current is drawn continuously.
JMK

MM-1315-125

Operating Voltage = 250/480 V~, 50 / 60 Hz Operating Voltage = 125/208 V~, 50 - 400 Hz
JMK

MM-1477-60

The MM-1477-60 filter is designed for use with large computer or motor installations where heavy current is drawn continuously
JMK

MM-16

Metal Film MELF Resistor
UNIOHM

MM-B11660-R930

2.54mm (.100") Pitch DIN 41612 R Style Male Header with Wire-Wrap, Vertical, Through Hole Press-Fit, 0.30μm (12μ") Selective Gold (Au) Plating, 96 Circuits
MOLEX