SMLP13EC8TT86 [ROHM]
Single Color LED, Green, Colorless Transparent, 0.6mm,;![SMLP13EC8TT86](http://pdffile.icpdf.com/pdf2/p00265/img/icpdf/SML-P13PTT86_1597871_icpdf.jpg)
型号: | SMLP13EC8TT86 |
厂家: | ![]() |
描述: | Single Color LED, Green, Colorless Transparent, 0.6mm, 光电 |
文件: | 总12页 (文件大小:1052K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
SML-P12x/P13x Series
ꢀꢀꢀꢀꢀPICOLEDTM
ꢀꢀꢀꢀ
Data Sheet
■Features
■Outline
• Ultra compact, thin sizeꢀ1.0×0.6mm
• Original device technology enables high brightness
and high reliability
• Lead Free/RoHS Compliant.
■Size
Color
Type
V
U
U2
F
D
P
Y3
E
Y
B
W
1006 (0402)
WB
Y2 M2
M
1.0×0.6mm (t=0.2mm)
■Dimensions
■Recommended Solder Pattern
1
0.6
0.6
0.5
0.4
Cathode index
4-R0.15
0.5
PCB Bonding Direction
Tolerance : ±0.05
Electrode
0.4
(unit : mm)
(unit : mm)
■Specifications
Absolute Maximum Ratings (Ta=25ºC)
Electrical and Optical Characteristics (Ta=25ºC)
Dominant Wavelength λD
/Chromaticity coordinate(x,y)
Peak Forward
Forward
Reverse
Voltage
Forward Voltage VF Reverse Current IR
Luminous Intensity IV
Power
Emitting color
Chip Structure
Operating Temp. Storage Temp.
Part No.
Min.*2
Max.*2
Dissipation
Current
Current
IF
VR
IF
IF
Typ.
Max.
Typ.
Min. Typ.
PD(mW) IF(mA) IFP(mA) VR(V)
Topr(ºC)
Tstg(ºC)
(V) (mA) (μA)
(V)
(nm) (nm) (nm) (mA) (mcd) (mcd) (mA)
SML-P12VT (R)
SML-P12UT (R)
SML-P12U2T (R)
SML-P12DT (R)
SML-P12Y3T (R)
SML-P12YT (R)
SML-P12WT (R)
SML-P12Y2T (R)
SML-P12M2T (R)
SML-P12MT (R)
SML-P13FT (R)
SML-P13PT (R)
SMLP13EC8T
625 630 635
615 620 625
610 615 620
602 605 608
593 596 599
587 590 593
582 585 588
577 580 583
573 576 579
569 572 575
563 566 569
557 560 563
520 527 535
465 470 475
(x, y) (0.30, 0.30)
(x, y) (0.29, 0.29)
25
40
25
60
85
70
50
2.0
Red
Orange
63 100
40 90
40 100
52
2.1
100*1
20
AlGaInP Yellow
20
10
20
20
25
16
10
10
70
50
25
25
5
-40~+85 -40~+100
5
Yellowish green
54
2.2
6.3 18.0
4.0 10.0
56 110
52
34
2.1
3.0
Green
Blue
SMLP13BC8T
9.0
90
25
50*1
10
InGaN
5
100
5
5
SCMP13WBC8W *3
SMLP13WBC9W *3
33
2.9
150
White
56 150
*1 : Duty 1/10, 1kHz *2 : Measurement tolerance:±1nm、*3:Brightness for white color is noted with chromaticity coordinate(x,y).
*PICOLEDTM is ROHM's pending trademark.
________________________________________________________
www.rohm.com
1/10
©2016 ROHM Co., Ltd. All rights reserved
2017.11 - Rev.007
[SML-P12x/P13x series]
[Data Sheet]
ꢀꢀꢀꢀ
■Electrical Characteristics Curves
Reference
Fig.1 Forward Current
- Forward Voltages
Fig.2 Luminous Intensity -
ꢀꢀꢀꢀꢀAtmosphere Temperature
SML-P12VT (R)
SML-P12UT (R)
SML-P12U2T (R)
SML-P12DT (R)
SML-P12Y3T (R)
SML-P12YT (R)
SML-P12WT (R)
SML-P12Y2T (R)
SML-P12M2T (R)
SML-P12MT (R)
SML-P13FT (R)
SML-P13PT (R)
SML-P12VT (R)
100
SML-P12UT (R)
SML-P12U2T (R)
SML-P12DT (R)
SML-P12Y3T (R)
SML-P12YT (R)
SML-P12WT (R)
SML-P12Y2T (R)
SML-P12M2T (R)
SML-P12MT (R)
SML-P13FT (R)
SML-P13PT (R)
Ta=25ºC
10
IF=20mA
1.0
1.5
2.0
2.5
FORWARD VOLTAGE : VF [V]
ATMOSPHERE TEMPERATURE : Ta [ºC]
SML-P12VT (R)
SML-P12UT (R)
Fig.3 Luminous Intensity - Forward Current
Fig.4 Derating
SML-P12U2T (R)
SML-P12DT (R)
SML-P12Y3T (R)
SML-P12YT (R)
SML-P12WT (R)
SML-P12Y2T (R)
SML-P12M2T (R)
SML-P12MT (R)
SML-P13FT (R)
SML-P13PT (R)
1.2
Ta=25ºC
1.0
0.8
0.6
0.4
0.2
0.1
SML-P12VT (R)
SML-P12UT (R)
SML-P12U2T (R)
SML-P12DT (R)
SML-P12Y3T (R)
SML-P12YT (R)
SML-P12WT (R)
SML-P12Y2T (R)
SML-P12M2T (R)
SML-P12MT (R)
SML-P13FT (R)
SML-P13PT (R)
0
5
10
15
20
FORWARD CURRENT : IF [mA]
AMBIENT TEMPERATURE : Ta [ºC]
________________________________________________________
www.rohm.com
2/10
©2016 ROHM Co., Ltd. All rights reserved
2017.11 - Rev.007
[SML-P12x/P13x series]
[Data Sheet]
ꢀꢀꢀꢀ
■Electrical Characteristics Curves
Reference
Fig.1 Forward Current
- Forward Voltages
Fig.2 Luminous Intensity -
ꢀꢀꢀꢀꢀAtmosphere Temperature
100
1.6
1.4
1.2
1
SMLP13EC8T
SMLP13BC8T
SCMP13WBC8W
SMLP13WBC9W
Ta=25ºC
IF=5mA
10
0.8
0.6
0.4
SMLP13EC8T
SMLP13BC8T
SCMP13WBC8W
1
-40-30-20-10 0 10 20 30 40 50 60 70 80 90100
2
2.2 2.4 2.6 2.8
3
3.2 3.4 3.6 3.8
4
FORWARD VOLTAGE : VF [V]
ATMOSPHERE TEMPERATURE : Ta [ºC]
Fig.3 Luminous Intensity - Forward Current
2
Fig.4 Derating
15
14
13
12
11
10
9
Ta=25ºC
SMLP13EC8T
SMLP13BC8T
SCMP13WBC8W
1.8
SMLP13EC8T
SMLP13BC8T
1.6
SCMP13WBC8W
SMLP13WBC9W
1.4
1.2
1
8
7
0.8
0.6
0.4
0.2
0
6
5
4
3
2
1
0
-40
10
60
110
0
2
4
6
8
10
FORWARD CURRENT : IF [mA]
AMBIENT TEMPERATURE : Ta [ºC]
________________________________________________________
www.rohm.com
3/10
©2016 ROHM Co., Ltd. All rights reserved
2017.11 - Rev.007
[SML-P12x/P13x series]
[Data Sheet]
ꢀꢀꢀꢀ
■Viewing Angle
Reference
SCANNING ANGLE (deg)
SCANNING ANGLE (deg)
SML-P12VT (R)
SML-P12UT (R)
SML-P12U2T (R)
SML-P12DT (R)
SML-P12Y3T (R)
SML-P12YT (R)
SML-P12WT (R)
SML-P12Y2T (R)
SML-P12M2T (R)
SML-P12MT (R)
SML-P13FT (R)
SML-P13PT (R)
RELATIVE INTENSITY (%)
SCANNING ANGLE (deg)
RELATIVE INTENSITY (%)
SCANNING ANGLE (deg)
SMLP13EC8T
SMLP13BC8T
SCMP13WBC8W
SMLP13WBC9W
RELATIVE INTENSITY (%)
RELATIVE INTENSITY (%)
________________________________________________________
www.rohm.com
4/10
©2016 ROHM Co., Ltd. All rights reserved
2017.11 - Rev.007
[SML-P12x/P13x series]
[Data Sheet]
ꢀꢀꢀꢀ
■Rank Reference of Brightness*
*Measurement tolerance:±10%
(Ta=25ºC, IF=20mA)
Red(V,U,U2)
Rank
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
Iv(mcd)
1.0〜1.6 1.6〜2.5 2.5〜4.0 4.0〜6.3 6.3〜10 10〜16 16〜25 25〜40 40〜63 63〜100 100〜160 160〜250 250〜400 400〜630 630〜1000 1000〜1600
SML-P12VT
SML-P12UT
SML-P12U2T
(Ta=25ºC, IF=20mA)
Orange(D)
Rank
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
Iv(mcd)
1.0〜1.6 1.6〜2.5 2.5〜4.0 4.0〜6.3 6.3〜10 10〜16 16〜25 25〜40 40〜63 63〜100 100〜160 160〜250 250〜400 400〜630 630〜1000 1000〜1600
SML-P12DT
(Ta=25ºC, IF=20mA)
Yellow(Y3,Y,W,Y2)
Rank
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
Iv(mcd)
1.0〜1.6 1.6〜2.5 2.5〜4.0 4.0〜6.3 6.3〜10 10〜16 16〜25 25〜40 40〜63 63〜100 100〜160 160〜250 250〜400 400〜630 630〜1000 1000〜1600
SML-P12Y3T
SML-P12YT
SML-P12WT
SML-P12Y2T
(Ta=25ºC, IF=20mA)
Yellowish Green(M2,M,)
Rank
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
Iv(mcd)
1.0〜1.6 1.6〜2.5 2.5〜4.0 4.0〜6.3 6.3〜10 10〜16 16〜25 25〜40 40〜63 63〜100 100〜160 160〜250 250〜400 400〜630 630〜1000 1000〜1600
SML-P12M2T
SML-P12MT
(Ta=25ºC, IF=20mA)
Green(F,P)
Rank
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
Iv(mcd)
1.0〜1.6 1.6〜2.5 2.5〜4.0 4.0〜6.3 6.3〜10 10〜16 16〜25 25〜40 40〜63 63〜100 100〜160 160〜250 250〜400 400〜630 630〜1000 1000〜1600
SML-P13FT
SML-P13PT
(Ta=25ºC, IF=5mA)
Green(E)
Rank
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
Iv(mcd)
0.9〜1.4 1.4〜2.2 2.2〜3.6 3.6〜5.6 5.6〜9.0 9〜14
14〜22 22〜36 36〜56 56〜90 90〜140 140〜220 220〜360 360〜560 560〜900
SMLP13EC8T
(Ta=25ºC, IF=5mA)
Blue(B)
Rank
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
Iv(mcd)
0.9〜1.4 1.4〜2.2 2.2〜3.6 3.6〜5.6 5.6〜9.0 9〜14
14〜22 22〜36 36〜56 56〜90 90〜140 140〜220 220〜360 360〜560 560〜900
SMLP13BC8T
(Ta=25ºC, IF=5mA)
White(WB)
Rank
N
P
Q
R
S
T
U
V
W
Iv(mcd)
SCMP13WBC8W
14~22 22~36 36~56 56~90 90~140 140~220 220~360 360~560 560~900
SMLP13WBC9W
■Chromaticity Diagram
0.4
0.3
0.2
0.4
SCMP13WBC8W
SMLP13WBC9W
K
F
3
2
0.3
H
A
1
0.2
0.2
0.3
CIE x
0.4
0.2
0.3
CIE x
0.4
(Ta=25℃、If=5mA)
(Ta=25℃、If=5mA)
1
2
3
A
F
H
K
x
y
x
y
x
y
x
y
x
y
x
y
x
y
0.262
0.252
0.292
0.260
0.297
0.310
0.280
0.296
0.283
0.264
0.248
0.283
0.305
0.287
0.295
0.304
0.330
0.277
0.292
0.280
0.236
0.260
0.282
0.280
0.297
0.306
0.282
0.310
0.283
0.306
0.320
0.316
0.283
0.306
0.342
0.276
0.305
0.267
0.304
0.307
0.287
0.330
0.315
0.295
0.307
0.311
0.296
0.315
0.294
0.276
0.330
0.330
0.311
0.360
0.318
0.294
Measurement tolerance:±0.02
Measurement tolerance:±0.02
________________________________________________________
www.rohm.com
5/10
©2016 ROHM Co., Ltd. All rights reserved
2017.11 - Rev.007
[SML-P12x/P13x series]
[Data Sheet]
ꢀꢀꢀꢀ
±0.1
4.00
■Taping(T86)
+0.1
0
φ1 . 5
A
±0.05
2 .0 0
±0.05
0 .7 0
±0.05
0. 3 2
Enlarged drawing of "A"
±1
11 . 4
Unit:mm
Note)Tolerance is within ±0.1mm unless
otherwise specified.
Packing quantity
5,000pcs/reel
Pulling
Direction
■Part No. Construction
*"-"will be taken out for emitting color
WB/B/E series.
Special Code will be applied for
Emitting color WB/B/E series.
Chromaticity rank
(for white LED)
Rank sign
(Brightness Rank)*
S
M
L
-
P
1
2
M
T
T
8
6
P
Series name
Package Type
Chip type Emitting Color
Resin Color
Taping Specification
Standard Type
SML
Chip LED
1.0x0.6 t=0.2mm
1.6x0.8 t=0.36mm
1.6x0.8 t=0.55mm
P1
0
1
2
3
4
5
6
7
8
V
Red
Red
T
W
B
Transparent Colorless
Milkey White
Black
T86 Cathode at sprocket hole side(the top)
T87 Anode at sprocket hole side(the top)
Low Current Type
E1
D1
H1
M1
01
Z1/ZN
A1
81/82
K1
S1
P2
52
P34
P36
U
High Brightness type
U2
For white LED,
1
Red
csthode at sprocket hole side
D
Orange
Yellow
Yellow
Yellow
Yellow
3
2.0x1.25 t=0.8mm
Y3
3.0x2.0 t=1.3mm
3.5x2.8 t=1.9mm
1.6x1.15 t=0.55mm
3.4x1.25 t=1.1mm
4.5x2.0 t=0.6mm
3.2x1.6 t=1.85mm
1.0x1.0 t=0.2mm
1.3x1.5 t=0.6mm
1.0x1.0 t=0.2mm
1.5x1.0 t=0.2mm
3.5x2.8 t=0.6mm
Y2
notice)S1 series、81 seires
T86 Cathode at sprocket hole side(the back)
T68 Cathode at sprocket hole side(the top)
Ultra High Brightness type
Y
W
M2 Yellowish green
M
F
Yellowish green
Green
*Concerning the Brightness rank.
*Please refer to the rank chart above for
luminous intensity classification.
*Part name is individual for each rank.
*When shipped as sample,the part name will
be a representative part name.
General products are free of ranks.
Please contact sales if rank appointment
is needed.
P
Green
E
Green
B
Blue
WB
T
White
VN
Phototransistors
RGB Red/Green/Blue
SCM
Chip LED
3.0x1.5 t=2.2mm
01
■Packing Specification
ROHM LED products are being shipped with desiccant (silica gel) included in moisture-proof bags.
Pasting the moisture sensitive label on the outer surface of the moisture-proof bags
or enclosing the humidity indication card inside the bag is available upon request.
Please contact the nearest sales office or distributer if necessary.
________________________________________________________
www.rohm.com
6/10
©2016 ROHM Co., Ltd. All rights reserved
2017.11 - Rev.007
[SML-P12x/P13x series]
[Data Sheet]
ꢀꢀꢀꢀ
■Precaution (Surface Mount Device)
1.Storage
If the product is heated during the reflow under the condition of hygroscopic state,
it may vaporize and expand which will influence the performance of the product.
Therefore, the package is waterproof. Please use the product following the conditions:
・Using Conditions
Classification
Temperature
Humidity
Expiration Date
Within 1 year
from Receiving
Remark
①Before using 5~30℃
30~70%RH
Storage with waterproof package
②After opening
Please storing in the airtight container
with our desiccant (silica gel)
5~30℃ Below 70%RH
Within 168h
package
・Baking
Bake the product in case of below:
①The expiration date is passed.
②The color of indicator (silica gel) turned from blue to colorless or from green to pink.
(Even if the product is within the expiration date.)
・Baking Conditions
Temperature
Time
Humidity
60±3℃
12~24h
Below 20%RH
・Bake products in reel.
・Reel and embossed tape are easy to be deformed when baking,
so please try not to apply stress on it.
Remark
・Recommend bake once.
2.Application Methods
2-1.Precaution for Drive System and Off Mode
Design the circuit without the electric load exceeding the ABSOLUTE MAXIMUM RATING that
applies on the products. If drive by constant voltage, it may cause current deviation of the LED and
result in deviation of luminous intensity, so we recommend to drive by constant current.
(Deviation of VF Value will cause deviation of current in LED.) Furthermore, for off mode,
please do not apply voltage neither forward nor reverse. Especially, for the products with the
Ag-paste used in the die bonding, there’s high possibility to cause electro migration and result
in function failure.
2-2.Derating
ꢀThe Derating Characteristics are based on the lifetime of luminous intensity and assumption
of degradation & color change of sealing resin or reflector. About its reliability,
please evaluate its using conditions and environment and use it after confirmed there is no problem.
2-3.Operation Life Span
There’s possibility for intensity of light drop according to working conditions and environments
(applied current, surrounding temperature and humidity, corrosive gases), please call our Sales
staffs for inquiries about the concerned application below.
①Longtime intensity of light life
②On mode all the time
2-4.Applied Stress on Product
No resin hardening agent such as filler is used in the sealing resin of the product.
Therefore, please pay attention to the overstress on it which may influence its reliability.
2-5.Usage
The Product is LED. We are not responsible for the usage as the diode such as Protection Chip,
Rectifier, Switching and so on.
________________________________________________________
www.rohm.com
7/10
©2016 ROHM Co., Ltd. All rights reserved
2017.11 - Rev.007
[SML-P12x/P13x series]
[Data Sheet]
ꢀꢀꢀꢀ
3.Others
3-1.Surrounding Gas
Notice that if it is stored under the condition of acid gas (chlorine gas, sulfured gas) or
alkali gas (ammonia), it may result in low soldering ability (caused by the change in quality of
the plating surface ) or optical characteristics changes (light intensity, chrominance) and change
in quality of cause die bonding (Ag-paste) materials. All of the above will function failure of
the products.
Therefore, please pay attention to the storage environment for mounted product (concern the
generated gas of the surrounding parts of the products and the atmospheric environment).
3-2.Electrostatic Damage
The product is part of semiconductor and electrostatic sensitive, there’s high possibility to be damaged
by the electrostatic discharge. Please take appropriate measures to avoid the static electricity from
human body and earthing of production equipment. Especially, InGaN type LEDs have lower resistance
value of electrostatic discharge and it is recommended to introduce the ESD protection circuit.
The resistance values of electrostatic discharge (actual values) vary with products, therefore,
please call our Sales staffs for inquiries.
3-3. Electromagnetic Wave
Applications with strong electromagnetic wave such as, IH cooker, will influence the reliability of LED,
therefore please evaluate before using it.
________________________________________________________
www.rohm.com
8/10
©2016 ROHM Co., Ltd. All rights reserved
2017.11 - Rev.007
[SML-P12x/P13x series]
[Data Sheet]
ꢀꢀꢀꢀ
4.Mounting
4-1. Soldering
・No resin hardening agent such as filler is used in the sealing resin of the product. Therefore, resin
expansion and moisture absorption at humidity will cause heat stress during soldering process and
finally has bad influence on the product’s reliability.
・The product is not guaranteed for flow soldering.
・Do not expose the product in the environment of high temperature (over 100℃) or rapid temperature
shift (within 3℃/sec. of temperature gradient) during the flow soldering of surrounding parts.
In case of carrying out flow soldering of surrounding parts without recommended conditions, please
contact us for inquiries.
・Please set appropriate reflow temperature based on our product usage conditions and specification.
・The max for reflowing is 2 times, please finish the second reflow soldering and flow soldering
with other parts within the usage limitation after open the moistureproof package.
・Compare with N2 reflow, during air reflow, because of the heat and surrounding conditions,
it may cause the discoloration of the resin.
・For our product that has no solder resist, because of its solder amount and soldering conditions,
ꢀone of its specific characteristics is that solder will penetrate into LED. Thus, there's high possibility
that will influence its reliability.Therefore, please be informed, concerning it before using it.
4-2. Automatic Mounting
4-2-1. Silicon Resin Sealing Product
The sealing resin of LED is very soft, so please select adsorption nozzle that would not apply stress
directly on the sealing section.
4-2-2. Mini Package (Smaller than 1608 size)
・Vibration may result in low mounting rate since it will cause the static electricity of product and
adhere to top cover tape. Therefore, the magnet should be set on parts feeder cassette of
the mounter to control the product stabilization. In addition, it is recommended to set ionizer
to prevent electrostatic charge.
4-3. Mounting Location
The stress like bending stress of circuit board dividing after mounting, may cause LED package crack
or damage of LED internal junction, therefore, please concern the mounting direction and position
to avoid bending or screwing with great stress of the circuit board.
Stress strength according to
he mounting position:
A>B>C>D
0.6mm
4―4. Mechanical Stress after Mounting
The mechanical stress may damage the LED after Circuit Mounting,
so please pay attention to the touch on product.
4-5.Soldering Pattern for Recommendation
We recommend the soldering pattern that shows on the right.
It will be different according to mounting situation of circuit board,
therefore, please concern before designing.
0.5mm
0.4mm
0.5mm
PCB Bonding Direction
※The product has adopted the electrode structure that it should solder
with back electrode of the product.
Reference
Mask open area ratio:80%
Mask thickness:80~100μm
Thus, please be informed that the shape of electrode pin of
solder fillet formation is not guaranteed.
The through hole on electrode surface is for conduction of front
_ꢀ_a_nd_r_ea_r_el_ec_tr_od_e_s_bu_t_n_ot_fo_r_fo_rm_a_ti_on_o_f_so_ld_e_r f_ill_et_. ________________________
www.rohm.com
9/10
©2016 ROHM Co., Ltd. All rights reserved
2017.11 - Rev.007
[SML-P12x/P13x series]
[Data Sheet]
ꢀꢀꢀꢀ
4-6.Reflow Profile
For reflow profile, please refer to the conditions below:(※)
■Meaning of marks, Conditions
Mark
Tsmax
Tsmin
ts
Meanings
Maximum of pre-heating temperature
Conditions
180℃
140℃
Over 60sec.
230~260℃
Minimum of pre-heating temperature
Time from Tsmin to Tsmax
Reference temperature
TL
tL
Retention time for TL Within 40sec.
TP
tP
ΔTR/Δt
ΔTD/Δt
Peak temperature
Time for peak temperature
Temperature rising rate
Temperature decreasing rate
260℃(Max)
Within 10sec.
Under 3℃/sec.
Over -3℃/sec.
※Above conditions are for reference. Therefore, evaluate by customer’s own circuit boards and
reflow furnaces before using, because stress from circuit boards and temperature variations of reflow
furnaces vary by customer’s own conditions.
4-7.Attention Points in Soldering Operation
This product was developed as a surface mount LED especially suitable for reflow soldering.
So reflow soldering is recommended. In case of implementing manual soldering,
please take care of following points.
①SOLDER USED
Sn-Cu,Sn-Ag-Cu,Sn-Ag-Bi-Cu
②HAND SOLDERING CONDITION
LED products do not contain reinforcement material such as a glass fillers.
So thermal stress by soldering greatly influence its reliability.
Please keep following points for manual soldering.
ITEM
RECOMMENDED CONDITION
Condition ) Temp. of iron top less than
400℃ within 3 sec.
Heating on PCB pattern, not direct to the
LED. (Fig-1)
a) Heating method
SOLDERING IRON
Fig-1
Handling after
Please handle after the part temp.
goes down to room temp.
b)
soldering
SOLDERING
LAND
4-8.Cleaning after Soldering
Please follow the conditions below if the cleaning is necessary after soldering.
Solvent
Temperature
Ultrasonic Cleaning
Drying
We recommend to use alcohols solvent such as, isopropyl alcohols
Under 30℃ within 3 minutes
15W/Below 1 liter (capacity of tank)
Under 100℃ within 3 minutes
________________________________________________________
www.rohm.com
10/10
©2016 ROHM Co., Ltd. All rights reserved
2017.11 - Rev.007
Notice
N o t e s
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifica-
tions :
3) Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi-
cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1102
A
Datasheet
Buy
SML-P12DT(R) - Web Page
Distribution Inventory
Part Number
Package
SML-P12DT(R)
SML-P1
Unit Quantity
5000
Minimum Package Quantity
Packing Type
Constitution Materials List
RoHS
5000
Taping
inquiry
Yes
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00242/img/page/SMLP34RGB1WT_1464223_files/SMLP34RGB1WT_1464223_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00242/img/page/SMLP34RGB1WT_1464223_files/SMLP34RGB1WT_1464223_2.jpg)
SMLP34RGB1WT1
Triple Color LED, Red/green/blue, Milky White, 1mm, 1 X 1 MM, 0.20 MM HEIGHT, ROHS COMPLIANT, 0404, 4 PIN
ROHM
![](http://pdffile.icpdf.com/pdf2/p00361/img/page/SMLP34RGBN1W_2214419_files/SMLP34RGBN1W_2214419_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00361/img/page/SMLP34RGBN1W_2214419_files/SMLP34RGBN1W_2214419_2.jpg)
SMLP34RGBN1W
ROHM的PICOLED™-利用其在尺寸方面超小超薄的优势,可以生成超越以往的超精细矩阵,从而能够更大程度地发挥出应用的潜力。另外,该系列产品将会成为未来应用产品要实现小型化和薄型化所不可或缺的主力产品。
ROHM
©2020 ICPDF网 联系我们和版权申明