SH2102WN (新产品) [ROHM]
应用:续流 关于裸芯片的规格和销售事宜,请咨询ROHM销售部门,目前尚未开始网售。;型号: | SH2102WN (新产品) |
厂家: | ROHM |
描述: | 应用:续流 关于裸芯片的规格和销售事宜,请咨询ROHM销售部门,目前尚未开始网售。 |
文件: | 总4页 (文件大小:1299K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SH2102WN
650V 50A Fast Recovery Diode
Datasheet
lOutline
Wafer (W05)
Unsawn on foil (U03)
VRM
IF (Nominal)
650V
50A
VF (Typ.)
1.45V
1976pcs
Notch side
Max. Possible Chips per Wafer
lFeatures
lInner Circuit
1) Light Punch Through Type
2) Low Forward Voltage
3) Very Fast & Soft Recovery
4) Low Recovery Loss
(1)
(1) Anode
(2) Cathode
(2)
lApplication
Free Wheeling
lAbsolute Maximum Ratings
Parameter
Repetitive Peak Reverse Voltage, Tj = 25°C
Forward Current
Symbol
Value
Unit
VRM
650
V
A
*1
*1)
IF
*2
Pulsed Forward Current
200
A
IFP
Tj
Operating Junction Temperature
*1 Depending on thermal properties of assembly
*2 Pulse width limited by Tjmax.
-40 to +175
°C
lElectrical Characteristics (at Tj = 25°C unless otherwise specified, in case of TO-247N package)
Values
Parameter
Breakdown Voltage
Reverse Current
Symbol
BV
Conditions
Unit
V
Min.
650
Typ.
Max.
-
IR = 10μA
-
IR
VR = 650V
-
-
10
μA
IF = 50A,
Tj = 25°C
Tj = 175°C
*3
Forward Voltage
-
-
1.45
1.55
1.9
-
V
VF
*3 Design assurance without measurement
www.rohm.com
© 2022 ROHM Co., Ltd. All rights reserved.
2022.06 - Rev.A
1/2
Datasheet
SH2102WN
lChip Information
①
2950
3600
325
3700
Unit : μm
: Pad Area
: Anode Bonding Pad
①
Backside : Cathode
0.10±0.03
Wafer Size
200mm
Wafer Thickness
Chip Size
0.07±0.01mm
3.70mm×3.70mm
0.10±0.03mm
AlSiCu:5.0μm
Cut Line Width
Top Side Metallization
Back Side Metallization Ti/Ni:0.4μm/Au:0.05μm
Passivation Polyimide
3.70
Unit:mm
lFurther Electrical Characteristics
Switching characteristics and thermal properties are depending strongly on module design
and mounting technology and can therefore not be specified for a bare die.
This chip data sheet refers to the device data sheet
RGTV00TS65D
www.rohm.com
© 2022 ROHM Co., Ltd. All rights reserved.
2022.06 - Rev.A
2/2
Notice
N o t e s
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifica-
tions.
3) Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products specified in this document are not designed to be radiation tolerant.
7) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, and power transmission systems.
8) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
9) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
10) ROHM has used reasonable care to ensure the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
11) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
12) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
13) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
R1107
S
Daattaasshheeeett
General Precaution
1. Before you use our Products, you are requested to carefully read this document and fully understand its contents.
ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any
ROHM’s Products against warning, caution or note contained in this document.
2. All information contained in this document is current as of the issuing date and subject to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales
representative.
3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all
information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or
liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or
concerning such information.
Notice – WE
Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.
相关型号:
SH2103WN (新产品)
Application: Free WheelingFor sale of Bare Die, please contact the specifications in our sales office. Currently, we don't sell Bare Die on the internet distributors now.
ROHM
SH2104WN (新产品)
Application: Free WheelingFor sale of Bare Die, please contact the specifications in our sales office. Currently, we don't sell Bare Die on the internet distributors now.
ROHM
SH2165-FGT
Microprocessor Circuit, CMOS, PQFP64, 10 X 10 MM, 0.50 MM PITCH, ROHS COMPLIANT, LQFP-64
SEMTECH
©2020 ICPDF网 联系我们和版权申明