SFR03EZPJ [ROHM]
SFR03EZPJ是罗姆的抗硫化贴片电阻器,凭借独创的内部结构,实现了比通用的贴片电阻器更高的抗硫化特性。适用于对高可靠性提出更高要求的组件、电路。;型号: | SFR03EZPJ |
厂家: | ROHM |
描述: | SFR03EZPJ是罗姆的抗硫化贴片电阻器,凭借独创的内部结构,实现了比通用的贴片电阻器更高的抗硫化特性。适用于对高可靠性提出更高要求的组件、电路。 电阻器 |
文件: | 总8页 (文件大小:1054K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Sulfur tolerant chip resistors
SFR series
Datasheet
●Features
1) Special construction prevents sulfur gas penetration, significantly increasing
reliability.
2) ROHM resistors have obtained ISO9001 / IATF16949 certification.
3) Corresponds to AEC-Q200.
●Products list
Limiting
element
voltage
Operating
temperature
range
Rated
power(70°C)
Temperature Resistance
Automotive
Grade
Available
Size
Resistance range
coefficient
tolerance
Part No.
(Ω)
(mm) (inch)
(W)
(V)
50
(ppm/ °C)
+500/-250
±100
(%)
(°C)
1.0≦R<10 (E24/96 series)
10≦R≦2.2M (E24/96 series)
1.0≦R<10 (E24 series)
10≦R≦10M (E24 series)
F(±1%)
J(±5%)
0.063
SFR01
1005
0402
-55 ~ +155
Yes
500/-250
±200
( Jumper type ) Resistance : Max. 50mΩ, Rated current : 1A
±100
±400
±200
F(±1%)
10≦R≦10M (E24/96 series)
1.0≦R<10 (E24 series)
10≦R≦10M (E24 series)
0.1
50
SFR03
SFR10
1608
2012
0603
0805
J(±5%)
-55 ~ +155
-55 ~ +155
Yes
Yes
( Jumper type ) Resistance : Max. 50mΩ, Rated current : 1A
±100
±400
±200
F(±1%)
10≦R≦2.2M (E24/96 series)
1.0≦R<10 (E24 series)
10≦R≦10M (E24 series)
0.125
150
J(±5%)
( Jumper type ) Resistance : Max. 50mΩ, Rated current : 2A
±100
±400
±200
F(±1%)
10≦R≦2.2M (E24/96 series)
1.0≦R<10 (E24 series)
10≦R≦10M (E24 series)
0.25
0.5
200
SFR18
SFR25
3216
3225
1206
1210
J(±5%)
-55 ~ +155
-55 ~ +155
Yes
Yes
( Jumper type ) Resistance : Max. 50mΩ, Rated current : 2A
±100
±200
F(±1%)
J(±5%)
10≦R≦1M (E24/96 series)
1≦R≦1M (E24 series)
200
( Jumper type ) Resistance : Max. 50mΩ, Rated current : 2A
* Design and specifications are subject to change without notice.
Carefully check the specification sheet supplied with the product before using or ordering it.
* E24 : Standard products, E96 : Build to order.
●Part Number Description
SFR
01
MZP
J
105
Resistance
tolerance
F (±1%)
Size (mm)[inch]
Type code
Nominal resistance
Part No.
Resistance code, 3 or 4 digits.
000 denotes jumper type.
SFR
01 (1005) [0402]
03 (1608) [0603]
10 (2012) [0805]
18 (3216) [1206]
25 (3225) [1210]
Packaging
specifications
Quantity
/ Reel
Part No. Code
SFR01
SFR03 EZP
J (±5%)
(Sulfur tolerant chip
resistors)
Resistance
Resistance
code
Paper tape
( 2mmPitch)
Paper tape
MZP
10,000
5,000
5,000
5,000
4,000
tolerance
F
J
:
:
4 digits
3 digits
( 4mmPitch)
Paper tape
EX)
SFR10
SFR18
EZP
EZP
1Ω = 1R0 (±5%)
9.1Ω = 9R1 (±5%)
10Ω = 10R0 (±1%)
( 4mmPitch)
Paper tape
( 4mmPitch)
Embossed tape
( 4mmPitch)
100
1MΩ = 1004 (±1%)
105 (±5%)
(±5%)
SFR25 JZP
www.rohm.com
1/5
© 2022 ROHM Co., Ltd. All rights reserved.
2022.12 - Rev.006
SFR series
Datasheet
●Chip resistor dimensions and markings
■SFR 01
■SFR 03/10/18/25
<Marking method>
・SFR03
For E24 series, There are three or four digits
used for the calculation number and “R” is used
for the decimal point.
For E96 series, the nominal resistance is
expressed in 3 digits. The first 2 digits is symbol
to the resistance value and the last one is
symbol to multipliers.
(Please see P. 5)
・SFR10/18/25
There are three or four digits used for the
calculation number and “R” is used for the
decimal point.
(Unit : mm)
Marking existence
*Including jumper type
Part No. (mm)
(inch)
0402
L
W
t
a
b
0.25+0.05
-0.10
SFR01
SFR03
SFR10
SFR18
SFR25
1005
1608
2012
3216
3225
1.00±0.05
0.50±0.05
0.35±0.05
0.33±0.08
No
0603
0805
1206
1210
1.60±0.10
2.00±0.10
0.80±0.10
1.25±0.10
1.60±0.15
2.50±0.15
0.45±0.10
0.55±0.10
0.55±0.10
0.55±0.10
0.40±0.20
0.40±0.20
0.50±0.25
0.50±0.25
0.30±0.20
0.40±0.20
0.50±0.25
0.50±0.25
Yes
Yes
Yes
Yes
3.20+0.15
-0.20
3.20+0.15
-0.20
●Land pattern example
(Unit : mm)
D
Dimensions
Part No.
A
B
C
SFR01
SFR03
SFR10
SFR18
SFR25
0.50
1.30
2.00
2.60
4.00
4.00
0.50
0.80
1.15
1.50
2.30
0.40
0.50
0.70
0.90
0.90
1.00
1.20
2.20
2.20
www.rohm.com
2/5
© 2022 ROHM Co., Ltd. All rights reserved.
2022.12 - Rev.006
SFR series
Datasheet
●Derating curve
When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curve below.
■SFR 01/03/10/18/25
●Characteristics
Guaranteed value
Test items
Test conditions
Resistor type
Jumper type
Resistance
See P.1
See P.1
20°C
Variation of resistance
with temperature
Overload
Measurement : +25/+125°C
±(2.0%+0.1Ω)
MAX. 50mΩ
Rated voltage(current)×2.5, 2s
Test voltage is the smaller one of ① or ②
①Rated voltage (current)X2.5, 2s
②Maximumꢀoverload voltage※
Solderability
A new uniformcoating of minimumof 95% of the Rosin-ethanol solution(25% mass)
surface being immersed and no soldering
Soldering condition : 245±5℃
Duration of immersion : 2.0±0.5s
damage.
Resistance to soldering
heat
±(1.0%+0.05Ω)
MAX. 50mΩ
Soldering condition : 260±5°C
No remarkable abnormality on the appearance.
Duration of immersion : 10±1s
Rapid change of
temperature
±(1.0%+0.05Ω)
MAX. 50mΩ
Test temp : -55℃~+125°C 1,000cycles
Damp heat, steady state
±(3.0%+0.1Ω)
±(3.0%+0.1Ω)
MAX. 100mΩ
MAX. 100mΩ
85°C,85%(Relative humidity)
Test time : 1,000h
Rated voltage(current),70°C
1.5h:ON-0.5h:OFF
Test time : 1,000h
Endurance at 70°C
Endurance
±(3.0%+0.1Ω)
MAX. 100mΩ
155°C
Test time : 1,000h
Resistance to solvent
±(1.0%+0.05Ω)
±(1.0%+0.05Ω)
MAX. 50mΩ
MAX. 50mΩ
23±5°C, , Immersion cleaning, 5±0.5min
Solvent: 2-propanol
Bend strength of the end
face plating
Endurance with 90mm width
Deflection : 3mm (SFR01/03/10/18)
Without mechanical damage such as breaks.
±(1.0%+0.05Ω) MAX. 50mΩ
Deflection : 1mm (SFR25)
Resistance in Sulfur vapor
Put specimen and sulfur powder 10g
in the desiccator which is placed under
110°C environment after sealed.
Test time : 1,000h
Compliance Standard(s) : IEC60115-1 / IEC60115-8
JIS C 5201-1 / JIS C 5201-8
※Maximum overload voltage (Voltage of overload test)
SFR01
100V
SFR03
100V
SFR10
200V
SFR18
400V
SFR25
400V
www.rohm.com
3/5
© 2022 ROHM Co., Ltd. All rights reserved.
2022.12 - Rev.006
SFR series
Datasheet
●Tape dimensions
■Paper tape
(Unit : mm)
P0
P2
Part No.
SFR01
SFR03
SFR10
SFR18
W
F
E
A0
B0
8.0±0.3
8.0±0.3
8.0±0.3
8.0±0.3
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
1.75±0.1
1.75±0.1
1.75±0.1
1.75±0.1
0.7±0.1
1.2±0.1
E
1.1±0.1
1.9±0.1
2.4+0.2
-0.1
3.5+0.15
-0.05
F
A0
B0
W
1.65+0.2
-0.1
1.95+0.1
-0.05
P1
Top tape
Base paper
Part No.
SFR01
SFR03
SFR10
SFR18
D0
P0
P1
P2
T2
(Bottom tape)
Cavity
Components
Φ1.5+0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
2.0±0.05
4.0±0.1
4.0±0.1
4.0±0.1
2.0±0.05
2.0±0.05
2.0±0.05
2.0±0.05
MAX1.1
MAX1.1
MAX1.1
MAX1.1
T2
0
Φ1.5+0.1
0
Φ1.5+0.1
0
Φ1.5+0.1
0
(Unit : mm)
■Embossed tape
Part No.
W
F
E
A0
B0
SFR25
8.0±0.3
3.5±0.05
1.75±0.1
3.0±0.1
3.5±0.1
Part No.
D0
P0
P1
P2
K
Φ1.5+0.1
SFR25
4.0±0.1
4.0±0.1
2.0±0.05
MAX1.1
0
●Reel dimensions
Using two kinds of reels for taping.
(Unit : mm)
D
Part No.
SFR01
SFR03
SFR10
SFR18
SFR25
A
B
C
Φ180 0
Φ60 +1.0
9 +1.0
Φ13±0.2
-1.5
0
0
www.rohm.com
© 2022 ROHM Co., Ltd. All rights reserved.
4/5
2022.12 - Rev.006
SFR series
Datasheet
●Markings of SFR03
1. Marking method :
For E24 series, there are three digits used for the calculation number and
“R” is used for the decimal point.
Example : 100kΩ = 104
2.2Ω = 2R2
For E96 series, the nominal resistance is expressed in 3 digits. The first 2 digits is symbol
to the resistance value and the last one is symbol to multipliers.
But E24 series in E96 follows original E24 series Marking.
Example : 10.2kΩ=102×102Ω⇒02C
2.05Ω=205×10-2Ω⇒31Y
Symbol
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
E96
100
102
105
107
110
113
115
118
121
124
127
130
133
137
140
143
147
150
154
158
162
165
169
174
Symbol
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
E96
178
182
187
191
196
200
205
210
215
221
226
232
237
243
249
255
261
267
274
280
287
294
301
309
Symbol
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
E96
316
324
332
340
348
357
365
374
383
392
402
412
422
432
442
453
464
475
487
499
511
523
536
549
Symbol
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
E96
562
576
590
604
619
634
649
665
681
698
715
732
750
768
787
806
825
845
866
887
909
931
953
976
*Hatching areas are overlapping E24 series
Alphabet
Y
X
A
H
C
D
E
10-2
10-1
100
101
102
103
104
Multipliers
2. Marking direction: Standard, Resistor surface marking.
3. Marking colors: Yellowish white marking or other appropriate marking.
www.rohm.com
5/5
© 2022 ROHM Co., Ltd. All rights reserved.
2022.12 - Rev.006
Notice
Precaution on using ROHM Products
1. Our Products are designed and manufactured for application in ordinary electronic equipment (such as AV equipment,
OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you
intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport
equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car
accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or
serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.
Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any
damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific
Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU
CHINA
CLASSⅢ
CLASSⅣ
CLASSⅡb
CLASSⅢ
CLASSⅢ
CLASSⅢ
2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3. Our Products are designed and manufactured for use under standard conditions and not under any special or
extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any
special or extraordinary environments or conditions. If you intend to use our Products under any special or
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of
product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (Exclude cases where no-clean type fluxes is used.
However, recommend sufficiently about the residue.) ; or Washing our Products by using water or water-soluble
cleaning agents for cleaning residue after soldering
[h] Use of the Products in places subject to dew condensation
4. The Products are not subject to radiation-proof design.
5. Please verify and confirm characteristics of the final or mounted products in using the Products.
6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse, is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7. De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in
the range that does not exceed the maximum junction temperature.
8. Confirm that operation temperature is within the specified range described in the product specification.
9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice-PGA-E
Rev.004
© 2015 ROHM Co., Ltd. All rights reserved.
Precautions Regarding Application Examples and External Circuits
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2. You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper
caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be
applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).
Precaution for Storage / Transportation
1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is
exceeding the recommended storage time period.
3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads
may occur due to excessive stress applied when dropping of a carton.
4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of
which storage time is exceeding the recommended storage time period.
Precaution for Product Label
A two-dimensional barcode printed on ROHM Products label is for ROHM’s internal use only.
Precaution for Disposition
When disposing Products please dispose them properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act
Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign
trade act, please consult with ROHM in case of export.
Precaution Regarding Intellectual Property Rights
1. All information and data including but not limited to application example contained in this document is for reference
only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any
other rights of any third party regarding such information or data.
2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the
Products with other articles such as components, circuits, systems or external equipment (including software).
3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM
will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to
manufacture or sell products containing the Products, subject to the terms and conditions herein.
Other Precaution
1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
4. The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
Notice-PGA-E
Rev.004
© 2015 ROHM Co., Ltd. All rights reserved.
Daattaasshheeeett
General Precaution
1. Before you use our Products, you are requested to carefully read this document and fully understand its contents.
ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any
ROHM’s Products against warning, caution or note contained in this document.
2. All information contained in this document is current as of the issuing date and subject to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales
representative.
3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all
information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or
liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or
concerning such information.
Notice – WE
Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.
相关型号:
SFR10-1STE1
Card Edge Connector, 10 Contact(s), 1 Row(s), Right Angle, 0.031 inch Pitch, Brown Insulator
AMPHENOL
©2020 ICPDF网 联系我们和版权申明