SE2004-DC94A [ROHM]
Hight Speed Thermal Printhead (8dots / mm); 海特高速热敏打印头( 8dots /毫米)型号: | SE2004-DC94A |
厂家: | ROHM |
描述: | Hight Speed Thermal Printhead (8dots / mm) |
文件: | 总5页 (文件大小:97K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SE2004-DC94A
Printheads
Hight Speed Thermal Printhead
(8dots / mm)
SE2004-DC94A
High speed, high quality, and high durability are achieved by using step free structure with high performance partial glaze
and highly conductive overcoat layer. SE200*-DC94A series are lined up which can accommodate with all types of
barcode labeling printers from Direct to Thermal Transfer, normal to high speed (over 300mm/s).
zApplications
Bar code label printers
Ticket printers
General purpose compact printers
zFeatures
1) Anti Sticking Treatment reduces sticking problems and achieves high print quality at any environmental conditions.
2) ROHM new technology “STEP FREE” structure will provide, high corrosion resistance, better resistance against
scratching damage, high efficiency.
3) Standard glazed components to accommodate thick paper.
4) Using a hard conductive film as a protective film on the heating element offers excellent resistance to electrostatic
damage.
5) Compatible with the SE3004-DC94A (300dpi) in mechanical specifications, to facilitate the making of a series of
printers.
zDimensions (Unit : mm)
DOT No.1
Max.φ20
124±0.5
112
6±0.2
(6)
Max.5
Max.10
#26
#25
#1
#2
#6
TYPE OF PRINTHEAD
#1
JST B6PS-VH
HIROSE HIF3FC-26PA-2.54DS
3-M3
EFFECTIVE DEPTH 3
100±0.2
10±0.2
16
±
0.2
φ
3 H10 LENGTH 4
EFFECTIVE DEPTH
φ3 H10
EFFECTIVE DEPTH 3
40
±
0.3
3
(22)
80±0.3
DOT No.1
Note: No heat history control function inside the thermal printhead. External heat history control is required for high speed printing.
1/4
SE2004-DC94A
Printheads
zEquivalent circuit
DOT #896
DOT #1
VH(COM)
V
DD
0.1µF
50V
#896
#449
#448
#1
GND
BEO
/ STB2
/ STB1
LATCH REGISTER
/ LAT
CLK
DI2
DI1
SHIFT REGISTER
SHIFT REGISTER
SENS1
SENS2
SENS3
TM
TM
CONNECTOR
DI No.
DI2
DOT No.
STB No.
DOT No.
896 to 449
/ STB2
/ STB1
896 to 449
448 to
1
DI1
448 to
1
zPin configuration
HIROSE
JST
No.
No.
Circuit
GND
DI2
No.
Circuit
VDD
Circuit
1
2
1
2
3
4
5
6
COM
COM
COM
GND
GND
GND
3
4
CLK(CP)
/STB2
DI1
5
/LAT
NC
6
7
8
9
/STB1
TM
10
12
14
16
18
20
22
24
26
NC
11
13
15
17
19
21
23
25
TM
SENS3
SENS1
NC
SENS2
BEO
NC
NC
NC
NC
NC
NC
NC
NC
NC
2/4
SE2004-DC94A
Printheads
zTiming chart
Min.45ns
CLK
Min.10ns
Min.30ns
DI
(DATA IN)
BEO
Min.100ns
Min.50ns
Min.12.5µs
/LAT
(LATCH)
Min.100ns
Min.300ns
/STB
(STROBE)
Max.12.5µs
Max.12.5µs
DRIVER
OUT
zCharacteristics
Parameter
Symbol
Typical
Unit
−
−
Effective printing width
Dot pitch
112
0.125
896
mm
mm
−
Total dot number
dots
Ω
Average resistance value
Applied voltage
Applied power
Rave
550
VH
24
V
P
O
0.91
0.42
896
W/dot
ms
SLT
−
Print cycle
dots
MHz
mm
Maximum number of dots energized simultaneously
Maximum clock frequency
−
10
−
Maximum roller diameter
20
50 / 1×108
5 to 45
km / pulses
°C
−
Running life / pulse life
−
Operating temperature
3/4
SE2004-DC94A
Printheads
zData sheet
1.5
1.4
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
180
160
140
120
100
80
R25=30kΩ
B=3950k
1.2
1.0
0.8
0.6
0.4
0.2
0.0
60
40
20
0
0.10
0.15
0.20
0.25
0.300.32
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2
SCANNING LINE TIME(ms / line)
-10
0
10 20 30 40 50 60 70
ENERGY(mJ / dot)
TEMPERATURE : (°C)
Fig. 1 Representative density curve
Fig. 2 Maximum energy curve
Fig. 3 Thermistor curve
4/4
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
THE AMERICAS / EUROPE / ASIA / JAPAN
ROHM Customer Support System
Contact us : webmaster@ rohm.co.jp
www.rohm.com
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Copyright © 2008 ROHM CO.,LTD.
21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
Appendix1-Rev2.0
相关型号:
SE204F10500/10500FQ
Array/Network Resistor, Divider, Metal Foil, 1W, 105ohm, 1% +/-Tol, -5,5ppm/Cel,
VISHAY
SE204F118R0/118R0DF
Array/Network Resistor, Divider, Metal Foil, 1W, 118ohm, 0.5% +/-Tol, -5,5ppm/Cel,
VISHAY
SE204F11K10/11K10DF
Array/Network Resistor, Divider, Metal Foil, 1W, 11100ohm, 0.5% +/-Tol, -5,5ppm/Cel,
VISHAY
SE204F11K70/11K70AA
Array/Network Resistor, Divider, Metal Foil, 1W, 11700ohm, 0.05% +/-Tol, -5,5ppm/Cel,
VISHAY
SE204F1K910/1K910BF
Array/Network Resistor, Divider, Metal Foil, 1W, 1910ohm, 0.1% +/-Tol, -5,5ppm/Cel,
VISHAY
SE204F32K80/32K80AA
Array/Network Resistor, Divider, Metal Foil, 1W, 32800ohm, 0.05% +/-Tol, -5,5ppm/Cel,
VISHAY
SE204F344R0/344R0AB
Array/Network Resistor, Divider, Metal Foil, 1W, 344ohm, 0.05% +/-Tol, -5,5ppm/Cel,
VISHAY
SE204F379R0/379R0DQ
Array/Network Resistor, Divider, Metal Foil, 1W, 379ohm, 0.5% +/-Tol, -5,5ppm/Cel,
VISHAY
SE204F3K740/3K740DQ
Array/Network Resistor, Divider, Metal Foil, 1W, 3740ohm, 0.5% +/-Tol, -5,5ppm/Cel,
VISHAY
SE204F3K790/3K790BB
Array/Network Resistor, Divider, Metal Foil, 1W, 3790ohm, 0.1% +/-Tol, -5,5ppm/Cel,
VISHAY
SE204F42K70/42K70AA
Array/Network Resistor, Divider, Metal Foil, 1W, 42700ohm, 0.05% +/-Tol, -5,5ppm/Cel,
VISHAY
SE204F46R40/46R40FF
Array/Network Resistor, Divider, Metal Foil, 1W, 46.4ohm, 1% +/-Tol, -5,5ppm/Cel,
VISHAY
©2020 ICPDF网 联系我们和版权申明