MNA028CN105MK [ROHM]
(1005 (0402) x 2 size, chip capacitor networks); （ 1005 （ 0402 ）× 2尺寸，贴片电容网络）
| 型号： | MNA028CN105MK |
| 厂家： | 
ROHM |
| 描述： | (1005 (0402) x 2 size, chip capacitor networks) |
| 文件： | 总7页 (文件大小：87K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MNA02
Ceramic capacitors
(1005 (0402)
MNA02
×2 size, chip capacitor networks)
zFeatures
Two multi-layer ceramic capacitors are integrated on a single chip providing reduced cost and mounting space.
zQuick Reference
The design and specifications are subject to change without prior notice. Please check the most recent technical
specifications prior to placing orders or using the product. For more detail information regarding packaging style code,
please check product designation.
zHigh dielectric constant
Temperature characteristics
Operating temp. range
°C
Rated voltage
(V)
Capacitance
tolerance
Thickness
(mm)
Part No.
Size code
Capacitance(pF)
1,000,000
code
(
)
1005x2
(0402x2)
15
(X5R)
%
0.8+0.05
−0.10
MNA02
CN
−25 to +85
6.3
M( 20%)
zExternal dimensions (Unit : mm)
1.37 0.15
0.36 0.1
C1 C2
C1 =C2
0.64 0.1
zProduct designation
(
)
Code Product thickness
Packaging specifications
Reel
Basic ordering unit pcs.
(
)
,
φ
K
0.8mm
Paper tape(width 8 mm, pitch 4 mm)
180mm 7in.
4 000
Reel(φ180mm) : compatible with EIAJ ET-7200A
Part No.
Packaging style
M N A 0 2 8 C N 1 0 5 M K
Temperature characteristic code
:Refer to quick reference table.
Rated voltage
Code Voltage
Nominal
capacitance
Capacitance tolerance
Code
tolerance
8
6.3V
3-digit designation
according to IEC
M
±20%
1/6
MNA02
Ceramic capacitors
zPerformance and test method
No.
Items
Performance
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
1
Appearance and
dimensions
No marked defects shall be allowed As per 4.4 of JIS C 5101-1.
for appearance. As per 4.5 of JIS C 5101-10
Dimensions shall be as specified the Using a Magnifier.
clause 4.
Withstanding voltage
No dielectrical breakdown or other
damage shall be allowed.
2
As per 4.6 of JIS C 5101-1.
As per 4.6.4 of JIS C 5101-10
Voltage shall be applied as per Table1.
Table 1
Characteristic
CN
Voltage
250% Rated voltage
Voltage shall be applied for 1 to 5s with
50mA charging and discharging current.
3
4
Insulation resistance
Capacitance
As per 4.5 of JIS C 5101-1.
As per 4.6.3 of JIS C 5101-10
Measurements shall be made after
60+/−5s period of the rated voltage
applied.
Not less than 100MΩ µF
within +/−20%
As per 4.7 of JIS C 5101-1.
As per 4.6.1 of JIS C 5101-10
Measurements shall be made under the
conditions specified in Table 2.
Table 2
Frequency Voltage
Characteristic
CN
1+/−0.1kHz
1+/−0.1Vrms.
Dielectric loss tangent
<
As per 4.8 of JIS C 5101-1.
5
6
tan δ 10.0%
−
As per 4.6.2 of JIS C 5101-10
Measurements shall be made under the
conditions specified in Table 2.
As per 4.24 of JIS C 5101-1.
As per 4.7 of JIS C 5101-10
If required, measurements shall be made
at a given temperature.
Measurements shall be made under the
conditions specified in Table 2.
Temperature
characteristic
Applied Capacitance Temperature
voltage
range
0Vdc
Within
+/−15%
−55°C~
+85°C
0Vdc
Within
+/−10%
−25°C~
+85°C
Table 2
Characteristic
CN
Frequency Voltage
3.15
Vdc
Within
+0/−30%
−25°C~
+85°C
1+/−0.1kHz
1+/−0.1Vrms.
Solderability
More than 3/4 of each end
termination shall be covered with
new solder.
As per 4.15.2 of JIS C 5101-1.
As per 4.11 of JIS C 5101-10
The solder specified in JIS Z 3282 H63A
shall be used. And the flux containing 25%
rosin and ethanol solution shall be used.
The specimens shall be immersed into the
7
solder at 235+/−5°C for 2+/−0.5s
So that both end terminations are
completely under solder.
2/6
MNA02
Ceramic capacitors
No.
8
Items
Performance
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
Resistance
to soldering
heat
As per 4.14 of JIS C 5101-1.
As per 4.10 of JIS C 5101-10
Appearance Without mechanical damage.
Change
The solder specified in JIS Z 3282. H63A
shall be used.
The specimens shall be immersed into the
solder at 260+/−5°C for 5+/−0.5s so that
both end terminations are completely
under the solder.
Pre-heating at 150+/−10°C for 1 to 2min
Initial measurements prior to test shall be
performed after the thermal
Pre-conditioning specified in Remarks (1).
Final measurements shall be made after the
specimens have been left at room
temperature as per Table3.
rate from
initial value
Within +/−7.5%
Dielectric
loss
tangent
Within specified initial value.
Insulation
resistance
Within specified initial value.
No defects shall be allowed.
Withstanding
voltage
Table 3
Characteristic
CN
Time
48+/−4 h
9
End termination
adherence
Without peeling or sign of
peeling shall be allowed
on the end terminations.
As per 4.13 of JIS C 5101-1.
As per 4.8 ofJIS C 5101-10
A 2N weight for 10+/−1s shall be applied
to the soldered specimens as shown by the
arrow mark in the below sketch.
Applied pressure
Substrate
Capacitor
Bending
strength
Appearance Without mechanical damage.
As per 4.35 of JIS C 5101-1.
As per 4.9 of JIS C 5101-10
10
Glass epoxy board with soldered
specimens shall be bent till 1mm by
1.0mm/s.
11 Vibration
As per 4.17 of JIS C 5101-1.
The specimens shall be soldered on the
specified test jig.
Appearance Without mechanical damage.
Change
rate from
initial value
Within +/−7.5%
Initial measurements shall be made after
the thermal pre-conditioning specified in
Remarks(1).
Final measurements shall be made after the
specimens have been left at room
temperature as per Table3.
[Condition]
Dielectric
loss
tangent
Within specified initial value.
Directions : 2h each X, Y and Z directions
Total : 6h
Frequency range : 10 to 55 to 10Hz(1min)
Applitude : 1.5mm
(shall not exceed acceleration196m/s2)
Table 3
Characteristic
CN
Time
48+/−4 h
3/6
MNA02
Ceramic capacitors
No.
Items
Performance
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
12 Temperature
cycling
As per 4.16 of JIS C 5101-1
As per 4.12 of JIS C 5101-10
Appearance Without mechanical damage.
Change
The specimens shall be soldered on the test
jig shown in Remarks.
Temperature cycle : 100cycles Initial
measurements prior to test shall be
performed after the thermal
per-conditioning specified in Remarks (1).
Final measurements shall be made after the
specimens have been left at room
temperature as per Table3.
rate from
initial value
Within +/−15.0%
Dielectric
loss
Within specified initial value.
tangent
Insulation
resistance
Within specified initial value.
No defects shall be allowed.
Test condition
Withstanding
voltage
Step
Temp. (°C)
Min operating temp.
Room temp.
Time (min)
1
2
3
4
30+/−3
<
3
−
30+/−3
<
3
−
Max operating temp.
Room temp.
Table 3
Characteristic
CN
Time
48+/−4 h
13 Humidity
(Steady)
As per 4.22 of JIS C 5101-1
As per JIS C 5101-10
Test temperature : 60+/−2°C
Relative humidity : 90 to 95%
Appearance Without mechanical damage.
Change
rate from
Within +/−25%
initial value
Test time
: 500 +24/−0 h
Initial measurements prior to test shall
be made after the voltage
pre-conditioning specified in
Remarks (2).
Dielectric
tangent
Less than 200% of initial spec.
Final measurements have been left at
room temperature as per Table3.
Table 3
Insulation
resistance
Not less than 10MΩ.
Characteristic
CN
Time
48+/−4 h
14 Humidity
life test
As per 4.22 of JIS C 5101-1
As per 4.14 of JIS C 5101-10
Test temperature : 60+/−2°C
Relative humidity : 90 to 95%
Voltage : Rated voltage
Test time : 500 +24/−0 h
Initial measurements prior to test shall
be made after the voltage
pre-conditioning specified in
Remarks (2).
Final measurements shall be made after
the specimens have been left at room
temperature as per Table3.
Table 3
Appearance Without mechanical damage.
Change
rate from
initial value
Within +/−25.0%
Dielectric
loss
Less than 200% of initial spec.
tangent
Insulation
resistance
Not less than 5MΩ.
Characteristic
CN
Time
48+/−4 h
4/6
MNA02
Ceramic capacitors
No.
Items
Performance
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
15 Heat life
test
As per 4.23 of JIS C 5101-1.
As per 4.15 of JIS C 5101-10
Appearance Without mechanical damage.
Change
rate from
initial value
Within +/−25.0%
Test
temperature
Test
time (h)
Voltage
Dielectric
loss
tangent
Less than 200% of initial spec.
1000
+48/−0
Rated
voltage
85°C
Insulation
resistance
Not less than 10MΩ.
Initial measurements prior to test shall be
made after the voltage pre-conditioning
specified in Remarks (2).
Final measurements shall be made after
the specimens have been left at room
temperature
Table 3
Characteristic
CN
Time
48+/−4 h
[Remarks]
Pre-conditioning
If specified in test method of as per 3(Performance and test method), capacitors of CNcharacteristics
shall be pre-conditionded as follows.
(1) Thermal pre-conditioning
Prior to initial measurements, specimens shall be conditioned at a temperature of 150 0/−10°C
for a period of 1hr., and shall be allowed to stabilize at room temperature for 48+/−4h
(2) Voltage pre-conditioning
Prior to initial measurements, voltage specified as a test condition shall be applied to specimens
for a period of 1hr., and the specimens shall be allowed to stabilize at room temperature for 48+/−4h
< T e s t j i g >
Soldering
Glass epoxy
substrate
5/6
MNA02
Ceramic capacitors
zPackaging specifications
Taping dimensions
Reel dimensions
t
φ
J
E
D
A
+1.0
9.0
−0
C
B
Pulling direction
F
G
H
t
1
K, L
Pulling direction
J
t
t
1
H
C
D
E
G
Symbol
Dimensions
F
3.5
0.95
+/ −0.05 MAX.
1.05
8.00
1.75
4.0
2.0
4.0
φ1.5
+/ −0.20 +/ −0.05 +/ −0.10 +/ −0.10 +/ −0.05 +/ −0.10 +0.1/ −0
Label pasting
Symbol
A
B
Style
As per EIAJ ET−7200A
Unit : mm)
(
MNA02
1.30+/−0.051.70+/−0.05
(Unit : mm)
zElectrical characteristics curves
30
20
30
0
−10
−20
−30
15
10
5
−80
−40
0
40
80
120
Fig.1 Temperature (°C)
6/6
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1
相关型号：
©2020 ICPDF网 联系我们和版权申明