MCR100EZHFL9R10 [ROHM]
Low Ohmic Thick Film Chip Resistors; 低电阻厚膜贴片电阻型号: | MCR100EZHFL9R10 |
厂家: | ROHM |
描述: | Low Ohmic Thick Film Chip Resistors |
文件: | 总7页 (文件大小:137K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Low Ohmic Thick Film Chip Resistors
MCR Series < General Purpose >
Features
1) Very-low ohmic resistance from 47mis in lineup by thick-film resistive element.
2) ROHM resistors have obtained ISO9001 / ISO / TS16949 certification.
3) "Automotive" product is AEC-Q200 compliant.
Size
Type Code
Packing
Specification
AUTOMOTIVE
∗Corresponds to
AEC−Q200
Part No.
Quantity / Reel
GENERAL PURPOSE
(mm)
0603
1005
1608
2012
3216
3225
5025
6432
(inch)
0201
0402
0603
0805
1206
1210
2010
2512
YRT
MRT
ERT
YZP
MZP
EZP
15,000
10,000
MCR006
MCR01
MCR03
MCR10
MCR18
MCR25
MCR50
MCR100
Paper tape
(2mm Pitch)
Paper tape
(4mm Pitch)
5,000
4,000
EZH
EZH
JZH
JZH
JZH
Embossed tape
(4mm Pitch)
∗Please contact us for status of AEC-Q200 on "General purpose" products.
Part Number Description
1 0
E Z H
J
L
1 R 0
M C R
Special part code
(mm [inch])
Part No.
Type Code
Size
Resistance
Tolerance
Nominal Resistance
Resistance code, 3 or 4 digits.
0.1 to 9.1Ω ( 1% )
0.1 to 0.91Ω ( 5% )
006 (0603 [0201])
01 (1005 [0402])
03 (1608 [0603])
10 (2012 [0805])
18 (3216 [1206])
25 (3225 [1210])
50 (5025 [2010])
100 (6432 [2512])
MCR
L
(Micro chip resistors)
F ( 1% )
J ( 5% )
Resistance
tolerance
Resistance
S
0.047 to 0.091Ω
code
+
Special P / N
FL, FS, JS
JL
:
:
4 digits
3 digits
Ex.)
0.047Ω = R047
9.1 Ω = 9R10
(
(
1%, 5% )
1% )
9R1 ( 5% )
www.rohm.com
2012.11 - Rev.C
1/6
c
○ 2012 ROHM Co., Ltd. All rights reserved.
MCR series - Low Ohmic - < General Purpose >
Data Sheet
Products List
Rated Power Limiting Element Maximum Temperature Resistance
Operating
Temperature
Range
(70°C)
Voltage
Overload
Voltage
(V)
Coefficient Tolerance
Part No.
Type Code
Resistance Range
Series
(W)
(V)
(ppm / °C
)
(%)
(°C)
600 / −200
F( 1%)
1.0Ω to
9.1Ω
−55 to +125
MCR006
YRT
MRT
ERT
EZH
EZH
JZH
JZH
0.05
0.063
0.1
0.67
0.76
0.95
1.51
1.51
2.13
2.13
1.34
1.52
1.90
3.02
3.02
4.26
4.26
400
F( 1%)
1.0Ω
1.0Ω
9.1Ω
9.1Ω
MCR01
MCR03
MCR10
MCR18
MCR25
MCR50
MCR100
to
to
400
F( 1%)
J( 5%)
500 300
400 200
250
0.047Ω to 0.091Ω
0.1Ω
0.13Ω
0.91Ω
to
0.15Ω
to
0.25
0.25
0.5
0.047Ω to 0.091Ω
500 300
400 200
250
0.1Ω
0.13Ω
9.1Ω
F( 1%)
J( 5%)
to
0.15Ω
to
E24
−55 to +155
500 300
400 200
250
0.047Ω to 0.091Ω
0.1Ω
0.13Ω
0.91Ω
to
0.15Ω
to
0.047Ω to 0.091Ω
500 300
400 200
250
0.1Ω
0.13Ω
9.1Ω
F( 1%)
J( 5%)
to
0.15Ω
to
300 300
200
0.047Ω
0.1Ω
0.091Ω
0.91Ω
to
to
300 300
200
0.047Ω
0.1Ω
0.091Ω
9.1Ω
to
to
F( 1%)
J( 5%)
500 300
400 200
250
0.047Ω
0.1Ω
0.15Ω
0.091Ω
0.13Ω
0.91Ω
to
to
to
0.5
500 300
400 200
250
0.047Ω
0.1Ω
0.15Ω
0.091Ω
0.13Ω
9.1Ω
to
to
to
F( 1%)
J( 5%)
500 300
400 200
250
0.047Ω
0.1Ω
0.15Ω
0.091Ω
0.13Ω
0.91Ω
to
to
to
−55 to +125
JZH
1
3.01
6.02
500 300
400 200
250
0.047Ω
0.1Ω
0.15Ω
0.091Ω
0.13Ω
9.1Ω
to
to
to
F( 1%)
∗Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product
before using or ordering it.
www.rohm.com
2012.11 - Rev.C
2/6
c
○ 2012 ROHM Co., Ltd. All rights reserved.
MCR series - Low Ohmic - < General Purpose >
Data Sheet
Chip Resistor Dimensions and Markings
L
<Marking method>
There are three or four digits used for the calculation number
according to IEC code and “R”is used for the decimal point.
W
t
47Y
a
b
(Unit : mm)
Marking
existence
Part No.
Type Code
(mm)
(inch)
L
W
t
a
b
0.6 0.03
1.0 0.05
1.6 0.1
2.0 0.1
3.2 0.15
3.2 0.15
5.0 0.15
6.3 0.15
0.3 0.03
0.5 0.05
0.8 0.1
1.25 0.1
1.6 0.15
2.5 0.15
2.5 0.15
3.2 0.15
0.23 0.03
0.35 0.05
0.45 0.1
0.55 0.1
0.55 0.1
0.55 0.15
0.55 0.15
0.55 0.15
0.15 0.05
0.2 0.1
0.3 0.2
0.4 0.2
0.5 0.25
0.5 0.25
0.6 0.25
0.6 0.25
0.15 0.05
No
No
MCR006
MCR01
MCR03
MCR10
MCR18
MCR25
MCR50
MCR100
YRT
MRT
ERT
EZH
EZH
JZH
JZH
JZH
0603
1005
1608
2012
3216
3225
5025
6432
0201
0402
0603
0805
1206
1210
2010
2512
+0.05
0.25
−0.1
0.3 0.2
0.4 0.2
Yes ∗
Yes
Yes
Yes
Yes
Yes
0.5 0.25
0.5 0.25
0.6 0.25
0.6 0.25
Symbol for E96 Series nominal resistance value
Marking method of MCR03
The description of markings on the chip resistor are as shown below.
Symbol
E96
Symbol
E96
Symbol
E96
Symbol
E96
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
178
182
187
191
196
200
205
210
215
221
226
232
237
243
249
255
261
267
274
280
287
294
301
309
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
316
324
332
340
348
357
365
374
383
392
402
412
422
432
442
453
464
475
487
499
511
523
536
549
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
562
576
590
604
619
634
649
665
681
698
715
732
750
768
787
806
825
845
866
887
909
931
953
976
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
100
102
105
107
110
113
115
118
121
124
127
130
133
137
140
143
147
150
154
158
162
165
169
174
①
Marking method :
・
For the resistance value contained in E96 series.
The nominal resistance is expressed in 3 digits. The first 2 digits is
symbol to the resistance value and the last one is symbol to multipliers.
3
×
Example : 100k = 01d
Example : 3.01k = 47b (47b 301 10 = 3010 = 3.01k )
(01d 100 10 = 100,000 = 100k )
1
×
・
For the resistance value not contained in E96 series and contained
in E-24 series.
The marking is expressed by E-24 series in 3 digits and one short bar
under the last marking letter.
Example : 390 = 391
Symbol for multipliers
Symbol
A
b
C
d
E
F
X
Y
0
1
2
3
4
5
multipliers 10
10
10
10
10
10
10−1
10−2
(Unit : mm)
D
Land pattern Example
Dimensions
Part No.
Type Code
YRT
A
B
C
MCR006
0.3
0.5
1.0
1.2
2.2
2.2
3.8
5.1
0.84
1.3
2.0
2.6
4.0
4.0
6.0
8.1
0.3
0.5
0.8
1.15
1.5
2.3
2.3
3.0
0.27
0.4
0.5
0.7
0.9
0.9
1.1
1.5
B
MCR01
MCR03
MCR10
MCR18
MCR25
MCR50
MCR100
MRT
ERT
D
EZH
land
C
EZH
A
JZH
JZH
JZH
www.rohm.com
2012.11 - Rev.C
3/6
c
○ 2012 ROHM Co., Ltd. All rights reserved.
MCR series - Low Ohmic - < General Purpose >
Data Sheet
Derating Curve
When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curves below.
ꢀ
ꢀ
MCR006 / 100
MCR01 / 03 / 10 / 18 / 25 / 50
100
100
80
60
40
20
0
80
60
40
20
0
−55
0
70
100 125
−55
0
70
100
C)
155
AMBIENT TEMPERATURE (°C)
AMBIENT TEMPERATURE (
°
Characteristics
Test Items
Test Conditions
Guaranteed Value
See "Products List"
Resistance
20°C
Variation of resistance
with temperature
See "Products List"
Measurement : +20 / −55 / +20 / +125°C
Rated voltage (current) ×2.5, 2s.
Maximum overload voltage
Overload
(2.0%+0.005Ω)
Rosin·Ethanol : 25% (weight)
Soldering condition : 235 5°C
Duration of immersion : 2.0 0.5s
A new uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
Solderability
(1.0%+0.005Ω)
Resistance to
soldering heat
Soldering condition : 260 5°C
Duration of immersion : 10 1s
No remarkable abnormality on the appearance.
Test temp.
Rapid change of
temperature
(1.0%+0.005Ω)
(3.0%+0.005Ω)
−55°C to +125°C 100cycle (MCR006)
−55°C to +125°C 5cycle (MCR01 / 03 / 10 / 18 / 25 / 50 / 100)
40°C, 93%RH (Relative Humidity)
Test time : 1,000h to 1,048h
Damp heat, steady state
70°C
Rated voltage (current)
1.5h : ON − 0.5h : OFF
Test time : 1,000h to 1,048h
Endurance at 70°C
(3.0%+0.005Ω)
(3.0%+0.005Ω)
125°C (MCR006 / 100)
155°C (MCR01 / 03 / 10 / 18 / 25 / 50)
Test time : 1,000h to 1,048h
Endurance
23 5°C, Immersion cleaning, 5 0.5min
Solvent : 2−propanol
(1.0%+0.005Ω) ※MCR006 only
(0.5%+0.005Ω)
Resistance to solvent
Bend strength of
the end face plating
Without Open.
−
Compliance Standard(s) : IEC60115−8
JISC 5201−8
Chip weight (typical value)
MCR006
YRT
MCR01
MRT
MCR03
ERT
MCR10
EZH
MCR18
EZH
MCR25
JZH
MCR50
JZH
MCR100
JZH
Parameter
Unit
Weight
mg/pc
0.150
0.565
2.03
5.00
9.78
16.5
25.8
42.0
www.rohm.com
2012.11 - Rev.C
4/6
c
○ 2012 ROHM Co., Ltd. All rights reserved.
MCR series - Low Ohmic - < General Purpose >
Data Sheet
Tape Dimensions
(Unit : mm)
Paper Tape
Part No.
Type Code
W
F
E
A
0
B0
P
0
MCR006
YRT
MRT
ERT
EZH
EZH
8.0 0.2
3.5 0.05
1.75 0.1
0.38 0.03 0.68 0.03
P
2
P1
φD
0
E
MCR01
MCR03
MCR10
MCR18
8.0 0.3
8.0 0.3
8.0 0.3
8.0 0.3
3.5 0.05
3.5 0.05
3.5 0.05
3.5 0.05
1.75 0.1
1.75 0.1
1.75 0.1
1.75 0.1
0.7 0.1
1.0 0.2
1.2 0.1
1.8 0.1
F
W
B0
+0.2
1.65
+0.2
2.4
A0
−0.1
−0.1
Top tape
(Bottom tape)
+0.1
1.95
+0.15
3.5
−0.05
−0.05
Base paper
Components
Cavity
T2
Part No.
Type Code
YRT
D
0
P
0
P
1
P
2
T2
+0.1
MCR006
φ1.5
4.0 0.1
4.0 0.1
2.0 0.05
2.0 0.1
2.0 0.05
2.0 0.05
Max 0.5
Max 1.1
0
+0.1
MCR01
MCR03
MCR10
MCR18
MRT
ERT
EZH
EZH
φ1.5
φ1.5
φ1.5
φ1.5
0
+0.1
4.0 0.1
4.0 0.1
4.0 0.1
4.0 0.1
2.0 0.05
2.0 0.05
Max 1.1
Max 1.1
0
+0.1
0
+0.1
4.0 0.1
4.0 0.1
2.0 0.05
Max 1.1
0
(Unit : mm)
Embossed Tape
Part No.
Type Code
JZH
W
F
E
A
0
B0
P0
P2
MCR25
8.0 0.3
12 0.3
12 0.3
3.5 0.05
1.75 0.1
3.0 0.1
3.4 0.2
3.5 0.2
3.5 0.1
5.6 0.2
6.7 0.2
D
φ
MCR50
JZH
JZH
5.5 0.05
5.5 0.05
1.75 0.1
1.75 0.1
MCR100
A0
P1
T2
Part No.
Type Code
JZH
D
0
P
0
P
1
P
2
T2
+0.1
MCR25
φ1.5
4.0 0.1
4.0 0.1
4.0 0.1
4.0 0.1
4.0 0.1
4.0 0.1
2.0 0.05
2.0 0.05
2.0 0.05
Max 1.1
Max 1.1
Max 1.1
0
+0.1
MCR50
JZH
JZH
φ1.5
φ1.5
0
+0.1
MCR100
0
www.rohm.com
2012.11 - Rev.C
5/6
c
○ 2012 ROHM Co., Ltd. All rights reserved.
MCR series - Low Ohmic - < General Purpose >
Data Sheet
Reel Dimensions
A
B
D
C
Label
ACCORDING TO EIAJ ET-7200B
(Unit : mm)
Part No. Type Code
A
B
C
D
YRT
MRT
ERT
EZH
EZH
JZH
JZH
JZH
MCR006
MCR01
MCR03
MCR10
MCR18
MCR25
MCR50
MCR100
+1.0
9
0
0
−1.5
+1.0
0
φ13 0.2
φ180
φ60
+1.0
13
0
www.rohm.com
2012.11 - Rev.C
6/6
c
○ 2012 ROHM Co., Ltd. All rights reserved.
Notice
N o t e s
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
R1120A
相关型号:
©2020 ICPDF网 联系我们和版权申明