MCH183FN224ZC [ROHM]
CAPACITOR, CERAMIC, MULTILAYER, 16V, Y5V, 0.22uF, SURFACE MOUNT, 0603, CHIP;
| 型号： | MCH183FN224ZC |
| 厂家： | 
ROHM |
| 描述： | CAPACITOR, CERAMIC, MULTILAYER, 16V, Y5V, 0.22uF, SURFACE MOUNT, 0603, CHIP 电容器 |
| 文件： | 总15页 (文件大小：204K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MCH18
Ceramic capacitors
Multi-layer ceramic chip capacitors
MCH18 (1608 (0603) size, chip capacitor)
zFeatures
1) Miniture, light weight
2) Achieved high capacitance by thin and multi layer technology
3) Lead-free plating terminal
4) No polarity
zQuick Reference
The design and specifications are subject to change without prior notice. Please check the most recent technical
specifications prior to placing orders or using the product. For more detail information regarding packaging style code,
please check product designation.
zThermal compensation
Temperature characteristics
Capacitance
tolerance
Thickness
(mm)
Operating temp. range
°C
Rated voltage
(V)
Part No.
Size code
Capacitance (pF)
(ppm/°C)
code
(
)
∗
∗
∗
∗
0.5 to 3.9 (E24 Series)
0
0
±
±
120
60(CH)
(CJ)
C
(± 0.25pF
(± 0.5pF
J( 5%
)
4
to 5 (E24 Series)
5.1 to 9.1 (E24 Series)
1608
(0603)
−55 to +125
0.8 ± ±0.1
MCH18
A (AN)
50
D
)
0±
30
10 (E24 Series)
(CG)(C0G
)
11 to 820 (E24 Series)
1,000 to 3,300 (E12 Series)
±
)
∗±:±0.5pF/0.75pF/2pF/3pF/4pF/5pF/6pF/7pF/8pF/9pF available
zHigh dielectric constant
Temperature
characteristics
Capacitance
tolerance
Operating temp. range
Rated voltage
(V)
Thickness
(mm)
Part No.
Size code
Capacitance (pF)
code
(
°C)
50
25
50
25
220 to 22,000 (E6 Series)
33,000 to 100,000 (E6 Series)
220 to 100,000 (E6 Series)
33,000 to 100,000 (E6 Series)
150,000 to 470,000 (E6 Series)
680,000 to 1,000,000 (E6 Series)
2,200,000 (E6 Series)
0± 10%
−25 to +85
(B)
0.8 ± ±0.1
+0.15
0
±
15%
−55 to +125
K
(± 10%)
(
R
) (X7R)
CN
10
0
±
15%
−55 to +85
(X5
R
)
0.8
−0.1
6.3
1,000 to 47,000 (E3 Series)
50
25
16
10
6.3
50
25
16
1608
(0603)
MCH18
100,000 (E3 Series)
220,000 (E3 Series)
470,000 to 2,220,000 (E3 Series)
4,700,000 (E3 Series)
+30% , −80%
−25 to +85
(F)
Z
(+80% , −20%
)
0.8 ± ±0.1
FN
1,000 to 47,000 (E3 Series)
100,000 (E3 Series)
220,000 (E3 Series)
470,000 to 2,200,000 (E3 Series)
4,700,000 (E3 Series)
+22% , −82%
(Y5V)
−30 to +85
10
6.3
Rev.A
1/14
MCH18
Ceramic capacitors
zExternal dimensions (Unit : mm)
1.6± 0.1 ∗1
∗2
0.8± 0.1
0.15Min. 0.4Min.
+0.15
−0.10
∗1 : CN charac. 680,000 to 2,200,000pF : 1.6
∗2 : CN charac. 680,000 to 2,200,000pF : 0.8
+0.15
−0.10
zProduct designation
Code Prduct thickness
Packing specification
Reel
Basic ordering unit (pcs.)
4,000
K
L
0.8mm
0.8mm
0.8mm
Paper tape(width 8mm, pitch 4mm)
φ180mm (7in.)
Paper tape(width 8mm, pitch 4mm) φ330mm (13in.)
16,000
C
Bulk case
−
15,000
Reel (
) : compatible with EIAJ ET-7200A
φ180, φ330mm
Bulk case : compatible with EIAJ ET-7201A
Part No.
Packing Style
M C H 1 8
5
F
N
1 0 3 Z K
Rated voltage
Code Voltage
Temperature characteristics code
: Refer to quick reference table.
Capacitance tolerance
Nominal
capacitance
Code
Tolerance
8
4
3
2
5
6.3V
10V
16V
25V
50V
C
D
J
±
±
±
0.25pF (0.5 to 5pF)
0.5pF (5.1 to 10pF)
5% (11pF or more)
3-digit
designation
according
to IEC
K
Z
±
10%
+80%, −20%
Rev.A
2/14
MCH18
Ceramic capacitors
zProduct No. list
•Thermal compensation capacitors
Temperature
Rated voltage (V)
Temperature
Capacitance
(pF)
Capacitance
Rated voltage (V)
(pF)
50V
Product No.
50V
Product No.
Tolerance Product thickness (mm)
Tolerance Product thickness (mm)
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
1,000
1,200
1,500
1,800
2,200
2,700
3,300
MCH185A (AN) 300J∗
MCH185A (AN) 330J∗
MCH185A (AN) 360J∗
MCH185A (AN) 390J∗
MCH185A (AN) 430J∗
MCH185A (AN) 470J∗
MCH185A (AN) 510J∗
MCH185A (AN) 560J∗
MCH185A (AN) 620J∗
MCH185A (AN) 680J∗
MCH185A (AN) 750J∗
MCH185A (AN) 820J∗
MCH185A (AN) 910J∗
MCH185A (AN) 101J∗
MCH185A (AN) 111J∗
MCH185A (AN) 121J∗
MCH185A (AN) 131J∗
MCH185A (AN) 151J∗
MCH185A (AN) 161J∗
MCH185A (AN) 181J∗
MCH185A (AN) 201J∗
MCH185A (AN) 221J∗
MCH185A (AN) 241J∗
MCH185A (AN) 271J∗
MCH185A (AN) 301J∗
MCH185A (AN) 331J∗
MCH185A (AN) 361J∗
MCH185A (AN) 391J∗
MCH185A (AN) 431J∗
MCH185A (AN) 471J∗
MCH185A (AN) 511J∗
MCH185A (AN) 561J∗
MCH185A (AN) 621J∗
MCH185A (AN) 681J∗
MCH185A (AN) 751J∗
MCH185A (AN) 821J∗
MCH185A (AN) 102J∗
MCH185A (AN) 122J∗
MCH185A (AN) 152J∗
MCH185A (AN) 182J∗
0.5
0.75
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.0
4.3
4.7
5.0
5.1
5.6
6
6.2
6.8
7
7.5
8
8.2
9
9.1
10
11
12
13
15
16
18
20
22
24
27
MCH185A (AN) 0R5C∗
MCH185A (AN) R75C∗
MCH185A (AN) 010C∗
MCH185A (AN) 1R1C∗
MCH185A (AN) 1R2C∗
MCH185A (AN) 1R3C∗
MCH185A (AN) 1R5C∗
MCH185A (AN) 1R6C∗
MCH185A (AN) 1R8C∗
MCH185A (AN) 020C∗
MCH185A (AN) 2R2C∗
MCH185A (AN) 2R4C∗
MCH185A (AN) 2R7C∗
MCH185A (AN) 030C∗
MCH185A (AN) 3R3C∗
MCH185A (AN) 3R6C∗
MCH185A (AN) 3R9C∗
MCH185A (AN) 040C∗
MCH185A (AN) 4R3C∗
MCH185A (AN) 4R7C∗
MCH185A (AN) 050C∗
MCH185A (AN) 5R1D∗
MCH185A (AN) 5R6D∗
MCH185A (AN) 060D∗
MCH185A (AN) 6R2D∗
MCH185A (AN) 6R8D∗
MCH185A (AN) 070D∗
MCH185A (AN) 7R5D∗
MCH185A (AN) 080D∗
MCH185A (AN) 8R2D∗
MCH185A (AN) 090D∗
MCH185A (AN) 9R1D∗
MCH185A (AN) 100D∗
MCH185A (AN) 110J∗
MCH185A (AN) 120J∗
MCH185A (AN) 130J∗
MCH185A (AN) 150J∗
MCH185A (AN) 160J∗
MCH185A (AN) 180J∗
MCH185A (AN) 200J∗
MCH185A (AN) 220J∗
MCH185A (AN) 240J∗
C (± 0.25pF)
J (±
5%)
0.8 ± ±0.1
0.8 ± ±0.1
D (± 0.5pF)
J (± 5%)
MCH185A (AN) 222J∗
MCH185A (AN) 272J∗
MCH185A (AN) 332J∗
MCH185A (AN) 270J∗
∗ : Packaging Code
Rev.A
3/14
MCH18
Ceramic capacitors
•High dielectric constant capacitors
Tempertature
CN (R) (B) (X7R) Characteristics
CN (X5R) Characteristics
Capacitance
Rated voltage (V)
(pF)
50V
25V
10V
6.3V
Tolerance Product rhickness (mm)
Product No.
Product No.
Product No.
Product No.
220
330
470
MCH185CN221K∗
MCH185CN331K∗
MCH185CN471K∗
MCH185CN681K∗
MCH185CN102K∗
MCH185CN152K∗
MCH185CN222K∗
MCH185CN332K∗
MCH185CN472K∗
MCH185CN682K∗
MCH185CN103K∗
MCH185CN153K∗
MCH185CN223K∗
680
1,000
1,500
2,200
3,300
4,700
6,800
10,000
15,000
K (±
10%)
0.8 ± ±0.1
22,000
33,000
MCH182CN333K∗
MCH182CN473K∗
MCH182CN683K∗
MCH182CN104K∗
47,000
68,000
100,000
150,000
220,000
330,000
470,000
680,000
1,000,000
2,200,000
MCH184CN154K∗
MCH184CN224K∗
MCH184CN334K∗
MCH184CN474K∗
MCH184CN684K∗
MCH184CN105K∗
MCH188CN225K∗
: Packaging code
∗
Temperature
Rated voltage (V)
FN (F) (Y5V) Characteristics
16V
Capacitance
(pF)
50V
25V
10V
6.3V
Tolerance Product thickness (mm)
Product No.
Product No.
Product No.
Product No.
Product No.
1,000
2,200
4,700
10,000
22,000
47,000 Z (
MCH185FN102Z∗
MCH185FN222Z∗
MCH185FN472Z∗
MCH185FN103Z∗
MCH185FN223Z∗
MCH185FN473Z∗
+
80%,
−20%)
0.8 ± ±0.1
100,000
220,000
470,000
MCH185FN104Z∗ MCH182FN104Z∗
MCH183FN224Z∗
MCH184FN474Z∗
MCH184FN105Z∗
MCH184FN225Z∗
1,000,000
2,200,000
4,700,000
MCH188FN475Z∗
∗
: Packaging code
Rev.A
4/14
MCH18
Ceramic capacitors
•Performance and test method
No.
Items
Performance
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
1
Appearance and
dimensions
No marked defects shall be allowed As per 4.4 of JIS C 5101-1.
for appearance. As per 4.5 of JIS C 5101-10
Dimensions shall be as specified in Using a Magnifier.
the clause 4.
Withstanding voltage
No dielectrical breakdown or other
damage shall be allowed.
2
As per 4.6 of JIS C 5101-1.
As per 4.6.4 of JIS C 5101-10
Voltage shall be applied as per Table1.
Table 1
Charac-
teristic
Voltage
300% Rated voltage
250% Rated voltage
A (AN)
CN
FN
Voltage shall be applied for 1 to 5s with
50mA charging and discharging current.
3
4
Insulation resistance
Capacitance
As per 4.5 of JIS C 5101-1.
As per 4.6.3 of JIS C 5101-10
Measurements shall be made after
60+/−5s period of the rated voltage
applied.
Not less than 10000MΩ or
500MΩ±±±µF, whichever is less.
(For products with rated voltage less
than 16V, it is not less than 10000MΩ
or 100MΩ±±±µF, whichever is less.)
Capacitance shall be
As per 4.7 of JIS C 5101-1.
within specified tolerance range.
As per 4.6.1 of JIS C 5101-10
Measurements shall be made under the
conditions specified in Table 2.
Table 2
Charac-
teristic
Frequency Voltage
<
1000 pF
> 1000 pF
1+/−0.1kHz
−
1+/−0.1MHz
A (AN)
1+/−0.1Vrms. 1+/−0.1Vrms.
CN
FN
1+/−0.1kHz
1+/−0.1Vrms.
Dielectric loss tangent
5
As per 4.8 of JIS C 5101-1.
<
A (AN) Capacitance 30pF
As per 4.6.2 of JIS C 5101-10
Measurements shall be made under the
conditions specified in Table 2.
<
tan δ 100/(400+20C)%
−
<
Capacitance 30pF
−
<
tan δ 0.1%
−
C N
F N
Rated voltage=25V
<
tan δ 3.0%
−
Rated voltage=16V
<
tan δ 5.0%
−
Rated voltage=50V
<
tan δ 5.0%
−
Rated voltage=25V
<
tan δ 7.5%
−
Rated voltage=16V
<
tan δ 10.0%
−
Rated voltage=10V
<
tan δ 12.5%
−
Rev.A
5/14
MCH18
Ceramic capacitors
No.
6
Items
Performance
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
CG
C0G
0+/−30ppm / °C
Temperature
characteristic
A (AN)
As per 4.24 of JIS C 5101-1.
(−55°C to +125°C)
As per 4.7 of JIS C 5101-10
Temperature coefficient shall be calculated
at 20°C and 85°C.
0+/−60ppm / °C
CH
(−55°C to +125°C)
0+/−120ppm / °C
CJ
(−55°C to +125°C)
+/−15%
X7R
R
As per 4.24 of JIS C 5101-1.
As per 4.7 of JIS C 5101-10
If required, measurements shall be made
at a given temperature.
C N
F N
(−55°C to +125°C)
+/−10%
B
(−25°C to +85°C)
+/−15%
X5R
F
(−55°C to +85°C)
+30%, −80%
(−25°C to +85°C)
+22%, −82%
Y5V
(−30°C to +85°C)
Solderability
More than 3/4 of each end
termination shall be covered with
new solder.
As per 4.15.2 of JIS C 5101-1.
As per 4.11 of JIS C 5101-10
The solder specified in JIS Z 3282 H63A
shall be used. And the flux containing 25%
rosin and ethanol solution shall be used.
The specimens shall be immersed into the
7
solder at 235+/−5°C for 2+/−0.5s
So that both end terminations are
completely under solder.
Resistance Appearance Without mechanical damage.
8
As per 4.14 of JIS C 5101-1.
to solderin
heat
As per 4.10 of JIS C 5101-10
The solder specified in JIS Z 3282. H63A
shall be used.
The specimens shall be immersed into the
solder at 260+/−5°C for 5+/−0.5s so that
both end terminations are completely
under the solder.
Pre-heating at 150+/−10°C for 1 to 2min
Initial measurements prior to test shall be
performed after the thermal
Within +/−2.5% or
+/−0.25pF whichever
is larger.
Change
rate from
initial value
A (AN)
C N
Within +/−7.5%
Within +/−20%
F N
Pre-conditioning specified in Remarks (1).
Final measurements shall be made after the
specimens have been left at room
temperature as per Table3.
Dielectric
loss
tangent
Within specified initial value.
Within specified initial value.
Table3
Insulation
resistance
Charac-
teristic
Time
A (AN)
24+/−2 h
48+/−4 h
Withstanding No defects shall be allowed.
voltage
CN, FN
End termination
adherence
Without peeling or sign of
peeling shall be allowed
on the end terminations.
9
As per 4.13 of JIS C 5101-1.
As per 4.8 ofJIS C 5101-10
A 5N weight for 10+/−1s shall be applied
to the soldered specimens as shown by the
arrow mark in the below sketch.
Applied pressure
Substrate
Capacitor
Rev.A
6/14
MCH18
Ceramic capacitors
No.
10
Items
Performance
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
Bending
strength
Appearance Without mechanical damage.
As per 4.35 of JIS C 5101-1.
As per 4.9 of JIS C 5101-10
Glass epoxy board with soldered
specimens shall be bent till 1mm by
1.0mm/s.
Vibration
Appearance Without mechanical damage.
11
As per 4.17 of JIS C 5101-1.
The specimens shall be soldered on the
specified test jig.
Initial measurements shall be made after
the thermal pre-conditioning specified in
Remarks(1).
Capacitance shall be
Change
A (AN)
within specified
tolerance range.
rate from
initial value
Final measurements shall be made after the
specimens have been left at room
temperature as per Table3.
[Condition]
Directions : 2h each X, Y and Z directions
Total : 6h
Frequency range : 10 to 55 to 10Hz(1min)
Applitude : 1.5mm
(shall not exceed acceleration196m/s2)
C N
Within +/−7.5%
Within +/−20%
F N
Dielectric
loss
tangent
Within specified initial value.
Table3
Charac-
teristic
Time
A (AN)
24+/−2 h
48+/−4 h
CN, FN
Temperature Appearance Without mechanical damage.
cycling
12
As per 4.16 of JIS C 5101-1
As per 4.12 of JIS C 5101-10
The specimens shall be soldered on the test
jig shown in Remarks.
Temperature cycle : 100cycles Initial
measurements prior to test shall be
performed after the thermal
per-conditioning specified in Remarks (1).
Final measurements shall be made after the
specimens have been left at room
temperature as per Table3.
Change
rate from
initial value
A (AN)
Within +/−2.5% or
+/−0.25pF whichever
is larger.
C N
F N
Within +/−7.5%
Within +/−20%
Test condition
Step
Temp. (°C)
Min operating temp.
Room temp.
Time (min)
1
2
3
4
30+/−3
Dielectric
loss
Within specified initial value.
Within specified initial value.
<
3
−
tangent
Max operating temp.
Room temp.
30+/−3
Insulation
resistance
<
3
−
Table3
Withstanding No defects shall be allowed.
voltage
Charac-
teristic
Time
A (AN)
24+/−2 h
48+/−4 h
CN, FN
Rev.A
7/14
MCH18
Ceramic capacitors
No.
13
Items
Performance
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
Humidity
(Steady)
Appearance Without mechanical damage.
Change
rate from
initial value
As per 4.22 of JIS C 5101-1
JIS C 5101-10
Test temperature : 60+/−2°C
Relative humidity : 90 to 95%
A (AN)
Within +/−5.0% or
+/−0.5pF whichever
is larger.
Test time
: 500 +24/−0 h
Initial measurements prior to test shall
be made after the voltage
pre-conditioning specified in
Remarks (2).
C N
F N
Within +/−12.5%
Within +/−30%
Final measurements have been left at
room temperature as per Table3.
<
tan δ 0.3%
Dielectric
tangent
A (AN)
C N
−
Less than 200% of
initial spec.
Table3
Charac-
Time
Less than 150% of
initial spec.
F N
teristic
A (AN)
24+/−2 h
48+/−4 h
Insulation
resistance
Not less than 1000MΩ±or
50MΩ±±±µF, whichever is less.
(For products with rated
CN, FN
voltage less than 16V, it is not less
than 1000MΩ±or 10MΩ±±±µF,
whichever is less.)
Humidity
life test
14
Appearance Without mechanical damage.
Change
rate from
initial value
As per 4.22 of JIS C 5101-1
As per 4.14 of JIS C 5101-10
Test temperature : 60+/−2°C
Relative humidity : 90 to 95%
Voltage : Rated voltage
Within +/−7.5% or
+/−7.5pF whichever
is larger.
A (AN)
Test time : 500 +24/−0 h
Initial measurements prior to test shall
be made after the voltage
pre-conditioning specified in
Remarks (2).
Final measurements shall be made after
the specimens have been left at room
temperature as per Table3.
Within +/−12.5%
Within +/−30%
C N
F N
<
Dielectric
loss
tangent
A (AN)
tan δ 0.5%
−
C N
F N
Less than 200% of
initial spec.
Table3
Less than 150% of
initial spec.
Charac-
Time
teristic
Insulation
resistance
Not less than 500MΩ±or
A (AN)
24+/−2 h
48+/−4 h
25MΩ±±±µF, whichever is less.
(For products with rated voltage less
than 16V, it is not less than 500mΩ
or 5MΩ±±±µF, whichever is less.)
CN, FN
Rev.A
8/14
MCH18
Ceramic capacitors
No.
Items
Performance
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
15 Heat life
test
Appearance Without mechanical damage.
As per 4.23 of JIS C 5101-1.
As per 4.15 of JIS C 5101-10
Change
A (AN)
Within +/−3.0% or
+/−0.3pF whichever
is larger.
rate from
initial value
Test
Voltage
Test
time (h)
temperature(°C)
C N
F N
Within +/−15%
Within +/−30%
A (AN)
CN
125
85
200%
Rated
voltage
1000
±±±±+48/−0
200%
1000
Rated
voltage
200%
Rated
voltage
200%
±±±±+48/−0
<
tan δ 0.3%
Dielectric
loss
tangent
A (AN)
−
125
85
C N
F N
Less than 200% of
initial spec.
FN
1000
±±±±+48/−0
Rated
voltage
Less than 150% of
initial spec.
Initial measurements prior to test shall be
made after the voltage pre-conditioning
specified in Remarks (2).
Final measurements shall be made after
the specimens have been left at room
Insulation
resistance
Not less than 1000MΩ±or
50MΩ±±±µF, whichever is less.
(For products with rated voltage less
than 16V, it is not less than 1000mΩ temperature
or 10MΩ±±±µF, whichever is less.)
Table3
Time
Charac-
teristic
A (AN)
24+/−2 h
48+/−4 h
CN, FN
[Remarks]
Pre-conditioning
If specified in test method of as per 3(Performance and test method), capacitors of CN, FN
characteristics shall be pre-conditionded as follows.
(1) Thermal pre-conditioning
Prior to initial measurements, specimens shall be conditioned at a temperature of 150 0/−10°C
for a period of 1hr., and shall be allowed to stabilize at room temperature for 48+/−4h
(2) Voltage pre-conditioning
Prior to initial measurements, voltage specified as a test condition shall be applied to specimens
for a period of 1hr., and the specimens shall be allowed to stabilize at room temperature for 48+/−4h
< T e s t j i g >
Soldering
Glass epoxy
substrate
Rev.A
9/14
MCH18
Ceramic capacitors
zPackaging specifications
Taping dimensions
Reel dimensions
t
φ
J
E
D
A
+1.0
9.0
−0
+
9.5 0.5
−
B
C
t
1
F
G
H
K : Paper tape
Pulling direction
t1
J
t
H
C
D
E
G
Symbol
F
1.05
MAX. MAX.
1.2
8.0
3.5
1.75
4.0
2.0
4.0
φ1.5
Dimensions
Label pasting
+/±−0.2 +/±−0.05 +/±−0.1 +/±−0.1 +/±−0.05 +/±−0.1 +0.1/±−0
(Unit : mm)
Symbol
A
B
Style
As per EIAJ ET−7200A
1.0
+/±−0.05
1.8
+/±−0.05
MCH18
(Unit : mm)
(1) The quantity for one reel is as bellows.
Paper tape
Quantity Symbol
Kind of reel
Series
φ180 reel
φ330 reel
MCH18 4,000 pcs.
MCH18 16,000 pcs.
K
L
(2) When the tape is pulled out towards the operator with the cover tape facing
upward, the feeding holes shall be found on the right portion of the tape.
(3) Specification of beginning and ending of the tape are as follows.
Ending(reel's center)
Beginning(reel's round)
: Approx. Over 300mm (no chips)
: Approx. Over 270mm (no chips)
: Approx. 30mm (no pasted tape)
: Approx. 260mm (cover tape only)
(4) No juncture of tape shall be allowed.
(5) The share strength of tape shall be more than 5N at the break down strength.
(6) The peel strength of the cover tape shall be 0.1 to 0.7(N) when the cover tape are
peeled 0 to 15 degree from the surface.
(7) The number of missing components shall not exceed 0.1% of the total number
of components (marked number) or one whichever is the larger, and no consecutive
missing exceeding two is allowed.
(8) The reels made from resin shall be used, as per EIAJ ET-7200A.
Rev.A
10/14
MCH18
Ceramic capacitors
zBulk case
Bulk case
Bulk case dimensions (As per EIAJ ET - 7201A)
C
Knob
Shutter
B
D
Coupled portion
A
E
A
B
C
D
E
5
Symbol
Dimensions 110
36
12
19
(Unit : mm)
(a)Quantity of package
T
Style
Quantity (pcs)
dimensions(mm)
MCH18
0.8
15,000 +10/−0
zMarking
No marking shall be performed on the chip.
Trademark, parts number, quantity, lot No. , and country of origin shall be labeled on each reel, bulk case.
zNumbering system for LOT No.
04
(1)
01
(2)
A0001
(3)
J
(4)
Example
(1) The end of the Christian Era < two digits> of production finish.
(2) Week in completing part of production finish.
(3) Manufacture continuity number.
(4) The symbol of manufacturing plant.
Rev.A
11/14
MCH18
Ceramic capacitors
zLabel expression
The Figure below is label expression
< Label Example > Part Number : MCH185A101JK
① Part Number
② Division cord
③ Quantity
④ Lot No.
⑤ The Country of origin
⑥ Inspector
⑦ QR code
⑧ Trademark
zPacking method
1) φ180mm Reel
EIAJ cole
C'
B'
2
(reel)
Label
A'
[width of 9mm
: 5reel]
1
A
(interior box of R-26)
Packing slip
B
C
(R-26)
Rev.A
12/14
MCH18
Ceramic capacitors
< Packaging unit >
Dimensions
Packaging
interior box of R-26
Symbol
K
5
R-26
195
Quantity of reel in
interior box
Quantity of reel in
box of R-26
A (A’)
B (B’)
C (C’)
185
255
190
60
20
185
(Unit : mm)
< Appearance >
Carton
< Accumulation >
You must do accumulation by ten boxes
< Packaging slip >
1. Customer
2. Parts number
3. Quantity
4. Box quantity
5. Trade mark
zWeight / Piece
(Unit : mg)
Size
Item
Thickness
0.8mm
Characteristics
Weight / Piece
A
5.5
4.5
5.5
5.5
AN
CN
FN
1608
MCH18
Note) The measured values in the table are for reference only.
Actual weight of these chips may vary slightly lot by lot.
zElectrical characteristics
A (C0G) Characteristics
1000000
100000
10000
1000
100
5
4
3
2
1
0
1pF
−
−
−
−
−
1
2
3
4
5
10
10pF
1
100pF
0.1
−
50
0
50
100
1
10
100
1000
10000
FREQUENCY (MHz)
TEMPERATURE : (°C)
Fig.1 Capacitance - temperature
characteristics
Fig.2 Impedance - frequency
characteristics
Rev.A
13/14
MCH18
Ceramic capacitors
30
20
10000
1000
100
10
10
0
−10
−20
−30
1
1,000pF
10,000pF
0.1
10
5
0.01
0.001
100,000pF
−80
−40
0
40
80
120
160
1
10
100
1000
10000
FREQUENCY (MHz)
TEMPERATURE : (°C)
Fig.4 Impedance - frequency
characteristics
Fig.3 Capacitance - temperature
characteristics
20
10000
1000
100
10
10
0
−10
−20
−30
−40
−50
−60
−70
−80
1
60
50
40
30
20
10
1,000pF
0.1
10,000pF
100,000pF
0.01
0.001
−80
−40
0
40
80
120
160
1
10
100
1000
10000
TEMPERATURE : (°C)
FREQUENCY (MHz)
Fig.5 Capacitance - temperature
characteristics
Fig.6 Impedance - frequency
characteristics
Rev.A
14/14
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1
相关型号：
©2020 ICPDF网 联系我们和版权申明