DTC124TMFHAT2L [ROHM]

Small Signal Bipolar Transistor;


型号：	DTC124TMFHAT2L
厂家：	ROHM
描述：	Small Signal Bipolar Transistor
文件：	总10页 (文件大小：1984K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DTC124T series

NPN 100mA 50V Digital Transistors (Bias Resistor Built-in Transistors)

Datasheet

AEC-Q101 Qualified

llOutline

Parameter

Value

50V

VMT3

EMT3

CEO

100mA

ꢀ

22kΩ

DTC124TM

DTC124TMFHA

DTC124TE

DTC124TEFRA

(SC-105AA)

SOT-416(SC-75A)

ꢀ

UMT3

SMT3

llFeatures

1) Built-In Biasing Resistor

ꢀ

2) Built-in bias resistors enable the configuration of

ꢀan inverter circuit without connecting external

ꢀinput resistors (see inner circuit) .

DTC124TUA

SOT-323(SC-70)

DTC124TKA

SOT-346(SC-59)

DTC124TUAFRA

DTC124TKAFRA

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀ ꢀ ꢀ

3) The bias resistors consist of thin-film resistors

ꢀwith complete isolation to allow negative biasing

ꢀof the input. They also have the advantage of

ꢀcompletely eliminating parasitic effects.

4) Only the on/off conditions need to be set

ꢀfor operation, making the circuit design easy.

5) Complementary PNP Types: DTA124T series

6) Lead Free/RoHS Compliant.

llInner circuit

llApplication

B: BASE

Switching circuit, Inverter circuit, Interface circuit,

Driver circuit

C: COLLECTOR

E: EMITTER

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

llPackaging specifications

Basic

Package

size

Taping

code

Reel size Tape width

Part No.

Package

ordering

Marking

(mm)

unit.(pcs)

DTC124TMFHA

DTC124TM

VMT3

EMT3

UMT3

SMT3

1212

1616

2021

2928

T2L

180

8000

3000

DTC124TEFRA

DTC124TE

DTC124TUAFRA

DTC124TUA

T106

T146

DTC124TKAFRA

DTC124TKA

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

www.rohm.com

1/7

20121023 - Rev.001

ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

DTC124T series

Datasheet

llAbsolute maximum ratings (T_a= 25°C)

Parameter

Symbol

V_CBO

V_CEO

V_EBO

I_C

Values

Unit

Collector-base voltage

Collector-emitter voltage

Emitter-base voltage

Collector current

100

DTC124TMFHA

DTC124TM

150

DTC124TEFRA

DTC124TE

150

P_D

Power dissipation

DTC124TUAFRA

DTC124TUA

200

DTC124TKA

DTC124TKAFRA

200

T_j

Junction temperature

150

℃

T_stg

Range of storage temperature

-55 to +150

llElectrical characteristics (T_a= 25°C)

Values

Parameter

Symbol

Conditions

Unit

Min.

Typ.

Max.

Collector-base breakdown

voltage

BV_CBO

BV_CEO

I = 50μA

Collector-emitter breakdown

voltage

I = 1mA

BV_EBO

I_CBO

I = 50μA

Emitter-base breakdown voltage

Collector cut-off current

μA

= 50V

= 4V

0.5

0.3

600

28.6

I_EBO

Emitter cut-off current

Collector-emitter saturation voltage

V_CE(sat)I / I = 5mA / 0.5mA

h_FE

R₁

= 5V, I = 1mA

DC current gain

Input resistance

100

15.4

250

kΩ

= 10V, I = -5mA,

f_T

Transition frequency

250

MHz

f = 100MHz

*1 Each terminal mounted on a reference footprint

*2 Characteristics of built-in transistor

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀꢀ ꢀ ꢀ ꢀ

ꢀ

ꢀꢀ ꢀ ꢀ ꢀꢀꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

www.rohm.com

2/7

20121023 - Rev.001

ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

DTC124T series

Datasheet

llElectrical characteristic curves(Ta=25℃)

Fig.1 Grounded emitter propagation characteristics

Fig.2 Grounded emitter output characteristics

Fig.3 DC Current gain vs. Collector Current

Fig.4 Collector-emitter saturation voltage vs.

Collector Current

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

www.rohm.com

3/7

20121023 - Rev.001

DTC124T series

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

Datasheet

llDimensions

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

www.rohm.com

4/7

20121023 - Rev.001

DTC124T series

ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

Datasheet

llDimensions

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

www.rohm.com

5/7

20121023 - Rev.001

DTC124T series

ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

Datasheet

llDimensions

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

www.rohm.com

6/7

20121023 - Rev.001

DTC124T series

ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

Datasheet

llDimensions

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

www.rohm.com

7/7

20121023 - Rev.001

Daattaasshheeeett

Notice

Precaution on using ROHM Products

(Note 1)

1. If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment

aircraft/spacecraft, nuclear power controllers, etc.) and whose malfunction or failure may cause loss of human life,

bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales

representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way

responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any

ROHM’s Products for Specific Applications.

(Note1) Medical Equipment Classification of the Specific Applications

JAPAN

USA

CHINA

CLASSⅢ

CLASSⅣ

CLASSⅡb

CLASSⅢ

2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor

products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate

safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which

a failure or malfunction of our Products may cause. The following are examples of safety measures:

[a] Installation of protection circuits or other protective devices to improve system safety

[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure

3. Our Products are not designed under any special or extraordinary environments or conditions, as exemplified below.

Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the

use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our

Products under any special or extraordinary environments or conditions (as exemplified below), your independent

verification and confirmation of product performance, reliability, etc, prior to use, must be necessary:

[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents

[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust

[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,

H2S, NH3, SO2, and NO2

[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves

[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items

[f] Sealing or coating our Products with resin or other coating materials

[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of

flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning

residue after soldering

[h] Use of the Products in places subject to dew condensation

4. The Products are not subject to radiation-proof design.

5. Please verify and confirm characteristics of the final or mounted products in using the Products.

6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,

confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power

exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect

product performance and reliability.

7. De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual

ambient temperature.

8. Confirm that operation temperature is within the specified range described in the product specification.

9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in

this document.

Precaution for Mounting / Circuit board design

1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product

performance and reliability.

2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must

be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,

please consult with the ROHM representative in advance.

For details, please refer to ROHM Mounting specification

Notice-PAA-E

Rev.001

Daattaasshheeeett

Precautions Regarding Application Examples and External Circuits

1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the

characteristics of the Products and external components, including transient characteristics, as well as static

characteristics.

2. You agree that application notes, reference designs, and associated data and information contained in this document

are presented only as guidance for Products use. Therefore, in case you use such information, you are solely

responsible for it and you must exercise your own independent verification and judgment in the use of such information

contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses

incurred by you or third parties arising from the use of such information.

Precaution for Electrostatic

This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper

caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be

applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,

isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).

Precaution for Storage / Transportation

1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:

[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2

[b] the temperature or humidity exceeds those recommended by ROHM

[c] the Products are exposed to direct sunshine or condensation

[d] the Products are exposed to high Electrostatic

2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period

may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is

exceeding the recommended storage time period.

3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads

may occur due to excessive stress applied when dropping of a carton.

4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of

which storage time is exceeding the recommended storage time period.

Precaution for Product Label

QR code printed on ROHM Products label is for ROHM’s internal use only.

Precaution for Disposition

When disposing Products please dispose them properly using an authorized industry waste company.

Precaution for Foreign Exchange and Foreign Trade act

Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign

trade act, please consult with ROHM in case of export.

Precaution Regarding Intellectual Property Rights

1. All information and data including but not limited to application example contained in this document is for reference

only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any

other rights of any third party regarding such information or data.

2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the

Products with other articles such as components, circuits, systems or external equipment (including software).

3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any

third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM

will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to

manufacture or sell products containing the Products, subject to the terms and conditions herein.

Other Precaution

1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.

2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written

consent of ROHM.

3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the

Products or this document for any military purposes, including but not limited to, the development of mass-destruction

weapons.

4. The proper names of companies or products described in this document are trademarks or registered trademarks of

ROHM, its affiliated companies or third parties.

Notice-PAA-E

Rev.001

Daattaasshheeeett

General Precaution

1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents.

ROHM shall not be in an y way responsible or liable for failure, malfunction or accident arising from the use of a ny

ROHM’s Products against warning, caution or note contained in this document.

2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior

notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s

representative.

3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all

information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or

liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or

concerning such information.

Notice – WE

Rev.001

DTC124TMFHAT2L [ROHM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E