BU2396KN [ROHM]
3ch Clock Generator for Digital Cameras; 3通道时钟发生器的数码相机型号: | BU2396KN |
厂家: | ROHM |
描述: | 3ch Clock Generator for Digital Cameras |
文件: | 总17页 (文件大小:675K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TECHNICAL NOTE
High-performance Clock Generator Series
3ch Clock Generator
for Digital Cameras
BU2394KN,BU2396KN
●Description
These clock generators are an IC generating three types of clocks – CCD, USB, and VIDEO clocks – necessary for digital
still camera systems and digital video camera systems, with a single chip through making use of the PLL technology.
Generating these clocks with a single chip allows for the simplification of clock system, little space occupancy, reduction in
the number of components used for mobile camera equipment, which is becoming increasingly downsized and less costly.
●Features
1) Connecting a crystal oscillator generates multiple clock signals with a built-in PLL.
2) The CCD clock provides switching selection outputs.
3) Providing the output of low period-jitter clock.
4) Incorporating compact package VQFN20 most suited for mobile devices.
5) Single power supply of 3.3 V
●Applications
Generation of clocks used in digital still camera and digital video camera systems
●Lineup
BU2394KN
3.0V~3.6V
BU2396KN
3.0V~3.6V
Supply voltage
Operating temperature range
Reference input clock
-5~+70℃
-5~+70℃
14.318182MHz
28.636363MHz
135.000000MHz
110.000000MHz
108.000000MHz
98.181818MHz
48.008022MHz
14.318182MHz
17.734450MHz
12.000000MHz
Output CCD clock
36.000000MHz
30.000000MHz
24.000000MHz
Output USB clock
12.000000MHz
27.000000MHz
Output VIDEO clock
●Absolute Maximum Ratings(Ta=25℃)
Parameter
Symbol
VDD
VIN
Limit
-0.5~7.0
-0.5~VDD+0.5
-30~125
530
Unit
V
Supply voltage
Input voltage
V
Storage Temperature range
Power dissipation
Tstg
℃
PD
mW
*1 Operating temperature is not guaranteed.
*2 In the case of exceeding Ta = 25℃, 5.3mW should be reduced per 1℃.
*3 The radiation-resistance design is not carried out.
*4 Power dissipation is measured when the IC is mounted to the printed circuit board.
Sep. 2008
●Recommended Operating Range
Parameter
Symbol
VDD
VINH
VINL
Topr
Limit
3.0~3.6
Unit
V
Supply voltage
Input H voltage
Input L voltage
Operating temperature
Output load
0.8VDD~VDD
0.0~0.2VDD
-5~70
V
V
℃
CL
15(MAX)
pF
●
Electrical characteristics
BU2394KN(VDD=3.3V, Ta=25℃, unless otherwise specified.)
XTAL_SEL=H with crystal oscillator at a frequency of 28.636363 MHz, while XTAL_SEL=L at 14.318182 MHz
Limit
Parameter
Symbol
Unit
Condition
Min.
Typ.
45
Max.
60
【Action circuit current】
【Output H voltage】
CLK1
At no load
IDD
-
mA
When current load = - 9.0mA
When current load = - 7.0mA
When current load = - 4.5mA
VOH1
VOH2
VOHR
VDD-0.5
VDD-0.5
VDD-0.5
VDD-0.2
VDD-0.2
VDD-0.2
-
-
-
V
V
V
CLK2
REF_CLK
【Output L voltage】
CLK1
When current load =11mA
When current load =9.0mA
When current load =5.5mA
VOL1
VOL2
VOLR
-
-
-
0.2
0.2
0.2
0.5
0.5
0.5
V
V
V
CLK2
REF_CLK
【Pull-Up resistance value】
FS1, FS2, FS3,
Specified by a current value
CLK2ON, XTAL_SEL
Pull-Up
R
running when a voltage of 0V is
applied to a measuring pin.
(R=VDD/I)
125
250
375
Ω
【Output frequency】
CLK1 FS2:H FS3:H
CLK1 FS2:H FS3:L
CLK1 FS2:L FS3:L
CLK1 FS2:L FS3:H
CLK2
XTAL×(1188/63)/2
XTAL×(1056/70)/2
XTAL×(864/63)/2
XTAL×(968/63)/2
XTAL×(228/17)/4
XTAL Output
Fclk1-1
Fclk1-2
Fclk1-3
Fclk1-4
Fclk2-2
Fref1-1
Fref1-2
-
-
-
-
-
-
-
135.000000
108.000000
98.181818
110.000000
48.008022
14.318182
17.734450
-
-
-
-
-
-
-
MHz
MHz
MHz
MHz
MHz
MHz
MHz
REF_CLK FS1:H
REF_CLK FS1:L
【Output waveform】
Duty1 100MHz or less
XTAL×(706/57)/10
Measured at a voltage of 1/2 of
VDD
Duty1
Duty2
45
50
50
55
%
%
Duty2 100MHz or more
Rise time
Measured at a voltage of 1/2 of
VDD
-
-
Period of transition time required
Tr
Tf
-
-
2.5
2.5
-
-
nsec for the output to reach 80% from
20% of VDD.
Fall time
Period of transition time required
nsec for the output to reach 20% from
80% of VDD.
【Jitter】
Period-Jitter 1σ
Period-Jitter MIN-MAX
※1
※2
P-J1σ
P-J
-
-
-
30
180
-
-
-
1
psec
psec
msec
MIN-MAX
【Output Lock-Time】
※3
Tlock
Note) The output frequency is determined by the arithmetic (frequency division) expression of a frequency input to XTALIN. If the
input frequency is set to values shown below, the output frequency will be as listed above.
When XTAL_SEL is set to H, the input frequency on XTALIN will be 28.636363 MHz.
When XTAL_SEL is set to L, the input frequency on XTALIN will be 14.318182 MHz.
2/16
BU2396N(VDD=3.3V, Ta=25℃, Crystal =12.000000MHz, unless otherwise specified.)
Limit
Parameter
Symbol
IDD
Unit
mA
Condition
Min.
Typ.
23
Max.
35
【Action circuit current】
At no load
-
【Output H voltage】
TGCLK
When current load =-5.0mA
When current load =-5.0mA
When current load =-5.0mA
VOHT
VOHV
VOHU
VDD-0.5
VDD-0.5
VDD-0.5
-
-
-
-
-
-
V
V
V
VCLK
UCLK
【Output L voltage】
TGCLK
When current load =5.0mA
When current load =5.0mA
When current load =5.0mA
VOLT
VOLV
VOLU
-
-
-
-
-
-
0.5
0.5
0.5
V
V
V
VCLK
UCLK
【Pull-Up resistance value】
TGCLK_SEL1
TGCLK_SEL2
Specified by a current value
running when a voltage of 0V is
applied to a measuring pin.
(R=VDD/I)
Pull-up
R
125
25
250
50
375
75
KΩ
KΩ
【Pull-Down resistance value】
TGCLK_EN, TGCLK_PD
Specified by a current value
running when a VDD is applied to
a measuring pin.
VCLK_EN, VCLK_PD
Pull-down
R
(R=VDD/I)
【Output frequency】
TGCLK SEL1:L SEL2:L
TGCLK SEL1:L SEL2:H
TGCLK SEL1:H
VCLK
XTAL×(48/4)/6
XTAL×(60/4)/6
XTAL×(54/3)/6
XTAL×(54/3)/8
XTAL output
TGCLK1
TGCLK2
TGCLK3
VCLK
24.000000
30.000000
36.000000
27.000000
12.000000
MHz
MHz
MHz
MHz
MHz
UCLK
UCLK
【Output waveform】
Duty
Measured at a voltage of 1/2 of VDD
Period of transition time required
Duty
Tr
45
50
55
%
Rise time
2.0
nsec for the output to reach 80% from
20% of VDD.
Fall time
Period of transition time required
nsec for the output to reach 20% from
80% of VDD.
Tf
2.0
【Jitter】
Period-Jitter 1σ
Period-Jitter MIN-MAX
※1
※2
P-J1σ
P-J
50
psec
psec
msec
300
MIN-MAX
Tlock
【Output Lock-Time】
※3
1
Note) The output frequency is determined by the arithmetic (frequency division) expression of a frequency input to XTALIN.
If the input frequency is set to 12.000000MHz, the output frequency will be as listed above.
Common to BU2394KN, BU2396KN
※1 Period-Jitter 1σ
This parameter represents standard deviation (=1σ) on cycle distribution data at the time when the output clock cycles are
sampled 1000 times consecutively with the TDS7104 Digital Phosphor Oscilloscope of Tektronix Japan, Ltd.
※2 Period-Jitter MIN-MAX
This parameter represents a maximum distribution width on cycle distribution data at the time when the output clock cycles are
sampled 1000 times consecutively with the TDS7104 Digital Phosphor Oscilloscope of Tektronix Japan, Ltd.
※3 Output Lock-Time
The Lock-Time represents elapsed time after power supply turns ON to reach a 3.0V voltage, after the system is switched from
Power-Down state to normal operation state, or after the output frequency is switched, until it is stabilized at a specified frequency,
respectively.
3/16
●Reference data (BU2394KN basic data)
RBW=1KHz
VBW=100Hz
500psec/div
1.0nsec/div
10KHz/div
Fig.1 135MHz output wave
At VDD=3.3V and CL=15pF
Fig.2 135MHz Period-Jitter
At VDD=3.3V and CL=15pF
Fig.3 135MHz Spectrum
At VDD=3.3V and CL=15pF
RBW=1KHz
VBW=100Hz
500psec/div
2.0nsec/div
10KHz/div
Fig.4 110MHz output wave
At VDD=3.3V and CL=15pF
Fig.5 110MHz Period-Jitter
At VDD=3.3V and CL=15pF
Fig.6 110MHz Spectrum
At VDD=3.3V and CL=15pF
RBW=1KHz
VBW=100Hz
500psec/div
2.0nsec/div
10KHz/div
Fig.7 108MHz output wave
At VDD=3.3V and CL=15pF
Fig.8 108MHz Period-Jitter
At VDD=3.3V and CL=15pF
Fig.9 108MHz Spectrum
At VDD=3.3V and CL=15pF
RBW=1KHz
VBW=100Hz
500psec/div
2.0nsec/div
10KHz/div
Fig.10 98MHz output wave
At VDD=3.3V and CL=15pF
Fig.11 98MHz Period-Jitter
At VDD=3.3V and CL=15pF
Fig.12 98MHz Spectrum
At VDD=3.3V and CL=15pF
4/16
●Reference data (BU2394KN basic data)
RBW=1KHz
VBW=100Hz
500psec/div
5.0nsec/div
10KHz/div
Fig.13 48MHz output wave
At VDD=3.3V and CL=15pF
Fig.14 48MHz Period-Jitter
At VDD=3.3V and CL=15pF
Fig.15 48MHz Spectrum
At VDD=3.3V and CL=15pF
RBW=1KHz
VBW=100Hz
500psec/div
10.0nsec/div
10KHz/div
Fig.16 17.7MHz output wave
At VDD=3.3V and CL=15pF
Fig.17 17.7MHz Period-Jitter
At VDD=3.3V and CL=15pF
Fig.18 17.7MHz Spectrum
At VDD=3.3V and CL=15pF
RBW=1KHz
VBW=100Hz
500psec/div
10.0nsec/div
10KHz/div
Fig.19 14.3MHz output wave
At VDD=3.3V and CL=15pF
Fig.20 14.3MHz Period-Jitter
At VDD=3.3V and CL=15pF
Fig.21 14.3MHz Spectrum
At VDD=3.3V and CL=15pF
5/16
●Reference data (BU2394KN Temperature and Supply voltage variations data)
600
500
400
300
200
100
0
100
90
80
70
60
50
40
30
20
10
0
55
54
53
52
51
50
49
48
47
46
45
VDD=2.9V
VDD=3.3V
VDD=3.7V
VDD=2.9V
VDD=3.3V
VDD=3.7V
VDD=2.9V
VDD=3.3V
VDD=3.7V
-25
0
25
50
75
100
-25
0
25
50
75
100
-25
-25
-25
-25
0
25
50
75
100
Temperature:T[℃]
Temperature:T[℃]
Temperature:T[℃]
Fig.24 135MHz
Fig.23 135MHz
Fig.22 135MHz
Temperature-Period-Jitter MIN-MAX
Temperature-Period-Jitter 1σ
Temperature-Duty
600
500
400
100
90
80
70
60
50
40
30
20
10
0
55
54
53
52
51
50
49
48
47
46
45
300
VDD=2.9V
VDD=3.3V
VDD=3.7V
VDD=2.9V
VDD=3.3V
VDD=3.7V
VDD=2.9V
VDD=3.3V
VDD=3.7V
200
100
0
-25
0
25
50
75
100
-25
0
25
50
75
100
0
25
50
75
100
Temperature:T[℃]
Temperature:T[℃]
Temperature:T[℃]
Fig.26 110MHz
Fig.27 110MHz
Fig.25 110MHz
Temperature-Period-Jitter 1σ
Temperature-Period-Jitter MIN-MAX
Temperature-Duty
600
500
400
100
90
80
70
60
50
40
30
20
10
0
55
54
53
52
51
50
49
48
47
46
45
VDD=2.9V
VDD=3.3V
VDD=3.7V
300
200
100
0
VDD=2.9V
VDD=3.3V
VDD=3.7V
VDD=2.9V
VDD=3.3V
VDD=3.7V
-25
0
25
50
75
100
-25
0
25
50
75
100
0
25
50
75
100
Temperature:T[℃]
Temperature:T[℃]
Fig.29 108MHz
Temperature:T[℃]
Fig.30 108MHz
Fig.28 108MHz
Temperature-Period-Jitter 1σ
Temperature-Period-Jitter MIN-MAX
Temperature-Duty
600
500
400
100
90
80
70
60
50
40
30
20
10
0
55
54
53
52
51
50
49
48
47
46
45
VDD=2.9V
300
VDD=2.9V
VDD=3.3V
VDD=3.7V
VDD=3.3V
VDD=3.7V
VDD=2.9V
VDD=3.3V
VDD=3.7V
200
100
0
-25
0
25
50
75
100
-25
0
25
50
75
100
0
25
50
75
100
Temperature:T[℃]
Temperature:T[℃]
Temperature:T[℃]
Fig.32 98MHz
Fig.33 98MHz
Fig.31 98MHz
Temperature-Period-Jitter 1σ
Temperature-Period-Jitter MIN-MAX
Temperature-Duty
6/16
●Reference data (BU2394KN Temperature and Supply voltage variations data)
600
500
400
300
200
100
0
100
90
80
70
60
50
40
30
20
10
0
55
54
53
52
51
50
49
48
47
46
45
VDD=3.7V
VDD=3.3V
VDD=2.9V
VDD=3.7V
VDD=3.3V
VDD=2.9V
VDD=2.9V
VDD=3.3V
VDD=3.7V
-25
0
25
50
75
100
-25
0
25
50
75
100
-25
-25
-25
-25
0
25
50
75
100
Temperature:T[℃]
Temperature:T[℃]
Temperature:T[℃]
Fig.36 98MHz
Fig.35 48MHz
Fig.34 48MHz
Temperature-Period-Jitter MIN-MAX
Temperature-Period-Jitter 1σ
Temperature-Duty
600
500
100
90
80
70
60
50
40
30
20
10
0
55
54
53
52
51
50
49
48
47
46
45
VDD=3.7V
VDD=3.3V
VDD=2.9V
VDD=3.7V
400
VDD=3.3V
VDD=2.9V
300
VDD=2.9V
VDD=3.3V
VDD=3.7V
200
100
0
-25
0
25
50
75
100
-25
0
25
50
75
100
0
25
50
75
100
Temperature:T[℃]
Temperature:T[℃]
Temperature:T[℃]
Fig.38 17.7MHz
Fig.39 17.7MHz
Fig.37 17.7MHz
Temperature-Period-Jitter 1σ
Temperature-Period-Jitter MIN-MAX
Temperature-Duty
600
500
100
90
80
70
60
50
40
30
20
10
0
55
54
53
52
51
50
49
48
47
46
45
VDD=3.7V
VDD=3.3V
VDD=2.9V
VDD=3.7V
VDD=3.3V
VDD=2.9V
400
300
200
100
0
VDD=2.9V
VDD=3.3V
VDD=3.7V
-25
0
25
50
75
100
-25
0
25
50
75
100
0
25
50
75
100
Temperature:T[℃]
Temperature:T[℃]
Fig.41 14.3MHz
Temperature:T[℃]
Fig.42 14.3MHz
Fig.40 14.3MHz
Temperature-Period-Jitter 1σ
Temperature-Period-Jitter MIN-MAX
Temperature-Duty
60
50
40
30
20
10
0
VDD=3.7V
VDD=3.3V
VDD=2.9V
0
25
50
75
100
Temperature:T[℃]
Fig.43 At 1chip operation
Temperature-Consumption current
7/16
●Reference data (BU2396KN basic data)
z
RBW=1KHz
VBW=100Hz
500psec/div
5.0nsec/div
10KHz/div
Fig.44 36MHz output waveform
At VDD=3.3V and CL=15pF
Fig.45 136MHz Period-Jitter
At VDD=3.3V and CL=15pF
Fig.46 36MHz Spectrum
At VDD=3.3V and CL=15pF
RBW=1KHz
VBW=100Hz
500psec/div
5.0nsec/div
10KHz/div
Fig.47 30MHz output waveform
At VDD=3.3V and CL=15pF
Fig.48 30MHz Period-Jitter
At VDD=3.3V and CL=15pF
Fig.49 30MHz Spectrum
At VDD=3.3V and CL=15pF
RBW=1KHz
VBW=100Hz
500psec/div
5.0nsec/div
10KHz/div
Fig.50 24MHz output waveform
At VDD=3.3V and CL=15pF
Fig.51 24MHz Period-Jitter
At VDD=3.3V and CL=15pF
Fig.52 24MHz Spectrum
At VDD=3.3V and CL=15pF
RBW=1KHz
VBW=100Hz
500psec/div
5.0nsec/div
10KHz/div
Fig.53 27MHz output waveform
At VDD=3.3V and CL=15pF
Fig.54 27MHz Period-Jitter
At VDD=3.3V and CL=15pF
Fig.55 27MHz Spectrum
At VDD=3.3V and CL=15pF
8/16
●Reference data (BU2396KN basic data)
RBW=1KHz
VBW=100Hz
500psec/div
5.0nsec/div
10KHz/div
Fig.56 12MHz output waveform
At VDD=3.3V and CL=15pF
Fig.57 12MHz Period-Jitter
At VDD=3.3V and CL=15pF
Fig.58 12MHz Spectrum
At VDD=3.3V and CL=15pF
●Reference data (BU2396KN Temperature and Supply voltage variations data)
600
500
400
300
200
100
0
100
90
80
70
60
50
40
30
20
10
0
55
54
53
52
51
50
49
48
47
46
45
VDD=2.9V
VDD=3.3V
VDD=3.7V
VDD=2.9V
VDD=3.3V
VDD=3.7V
VDD=2.9V
VDD=3.3V
VDD=3.7V
-25
0
25
50
75
100
-25
0
25
50
75
100
-25
-25
-25
0
25
50
75
100
Temperature T[
]
℃
:
Temperature:T[℃]
Temperature:T[℃]
Fig.60 36MHz
Temperature-Period-Jitter 1σ
Fig.59 36MHz
Temperature-Duty
Fig.61 36MHz
Temperature-Period-Jitter MIN-MAX
600
500
400
100
55
54
53
52
51
50
49
48
47
46
45
90
80
70
60
50
40
30
20
10
0
VDD=2.9V
VDD=3.3V
VDD=3.7V
VDD=2.9V
VDD=3.3V
VDD=3.7V
VDD=2.9V
300
VDD=3.3V
VDD=3.7V
200
100
0
-25
0
25
50
75
100
-25
0
25
50
75
100
0
25
50
75
100
Temperature T[
]
℃
:
Temperature:T[℃]
Temperature:T[℃]
Fig.64 30MHz
Fig.62 30MHz
Temperature-Duty
Fig.63 30MHz
Temperature-Period-Jitter 1σ
Temperature-Period-Jitter MIN-MAX
600
500
100
90
80
70
60
50
40
30
20
10
0
55
54
53
52
51
50
49
48
47
46
45
VDD=2.9V
VDD=3.3V
VDD=3.7V
400
VDD=2.9V
VDD=3.3V
VDD=3.7V
VDD=2.9V
VDD=3.3V
300
VDD=3.7V
200
100
0
-25
0
25
50
75
100
-25
0
25
50
75
100
0
25
50
75
100
Temperature:T[℃]
Temperature:T[℃]
Temperature:T[℃]
Fig.65 24MHz
Fig.66 24MHz
Fig.67 24MHz
Temperature-Duty
Temperature-Period-Jitter 1σ
Temperature-Period-Jitter MIN-MAX
9/16
●Reference data (BU2396KN Temperature and Supply voltage variations data)
600
500
400
300
200
100
0
100
90
80
70
60
50
40
30
20
10
0
55
54
53
52
51
50
49
48
47
46
45
VDD=2.9V
VDD=3.3V
VDD=3.7V
VDD=3.7V
VDD=3.3V
VDD=2.9V
VDD=3.7V
VDD=3.3V
VDD=2.9V
-25
0
25
50
75
100
-25
0
25
50
75
100
-25
-25
-25
0
25
50
75
100
Temperature T[
]
℃
:
Temperature:T[℃]
Fig.69 27MHz
Temperature-Period-Jitter 1σ
Temperature:T[℃]
Fig.70 27MHz
Temperature-Period-Jitter MIN-MAX
Fig.68 27MHz
Temperature-Duty
600
500
100
90
80
70
60
50
40
30
20
10
0
55
54
53
52
51
50
49
48
47
46
45
VDD=2.9V
VDD=3.3V
VDD=3.7V
400
VDD=2.9V
VDD=3.3V
VDD=3.7V
200
VDD=2.9V
VDD=3.3V
VDD=3.7V
300
100
0
-25
0
25
50
75
100
-25
0
25
50
75
100
0
25
50
75
100
Temperature T[
]
℃
:
Temperature:T[℃]
Fig.72 12MHz
Temperature-Period-Jitter 1σ
Temperature:T[℃]
Fig.73 12MHz
Temperature-Period-Jitter MIN-MAX
Fig.71 12MHz
Temperature-Duty
40
30
20
10
0
VDD=3.7V
VDD=3.3V
VDD=2.9V
0
25
50
75
100
Temperature:T[℃]
Fig.74 At 1chip operation
Temperature-Consumption current
10/16
●List of BU2396KN Operation Modes
When XTAL_SEL=L, (When a crystal oscillator of 14.318182-MHz frequency is used)
Xtal(MHz)
14.318182
14.318182
14.318182
14.318182
14.318182
14.318182
14.318182
14.318182
14.318182
14.318182
14.318182
14.318182
14.318182
14.318182
14.318182
14.318182
CLK2ON
H
FS1
H
L
H
L
H
L
H
L
H
L
H
L
H
L
H
L
FS2
H
H
H
H
H
H
H
H
L
L
L
L
L
L
L
L
FS3
H
H
H
H
L
L
L
L
L
L
L
L
H
H
H
H
CLK1(MHz)
135.000000
135.000000
135.000000
135.000000
108.000000
108.000000
108.000000
108.000000
98.181818
98.181818
98.181818
98.181818
110.000000
110.000000
110.000000
110.000000
CLK2(MHz)
48.008022
48.008022
Fixed to L
Fixed to L
48.008022
48.008022
Fixed to L
Fixed to L
48.008022
48.008022
Fixed to L
Fixed to L
48.008022
48.008022
Fixed to L
Fixed to L
REF_CLK(MHz)
14.318182
17.734450
14.318182
17.734450
14.318182
17.734450
14.318182
17.734450
14.318182
17.734450
14.318182
17.734450
14.318182
17.734450
14.318182
17.734450
H
L
L
H
H
L
L
H
H
L
L
H
H
L
L
When XTAL_SEL=H, (When a crystal oscillator of 28.636363MHz frequency is used)
Xtal(MHz)
28.636363
28.636363
28.636363
28.636363
28.636363
28.636363
28.636363
28.636363
28.636363
28.636363
28.636363
28.636363
28.636363
28.636363
28.636363
28.636363
CLK2ON
H
FS1
H
L
H
L
H
L
H
L
H
L
H
L
H
L
H
L
FS2
H
H
H
H
H
H
H
H
L
L
L
L
L
L
L
L
FS3
H
H
H
H
L
L
L
L
L
L
L
L
H
H
H
H
CLK1(MHz)
135.000000
135.000000
135.000000
135.000000
108.000000
108.000000
108.000000
108.000000
98.181818
98.181818
98.181818
98.181818
110.000000
110.000000
110.000000
110.000000
CLK2(MHz)
48.008022
48.008022
Fixed to L
Fixed to L
48.008022
48.008022
Fixed to L
Fixed to L
48.008022
48.008022
Fixed to L
Fixed to L
48.008022
48.008022
Fixed to L
Fixed to L
REF_CLK(MHz)
14.318182
17.734450
14.318182
17.734450
14.318182
17.734450
14.318182
17.734450
14.318182
17.734450
14.318182
17.734450
14.318182
17.734450
14.318182
17.734450
H
L
L
H
H
L
L
H
H
L
L
H
H
L
L
11/16
●List of BU2396KN Operation Modes
TGCLK_SEL
TGCLK
Output
VCLK
Output
UCLK
Output
PLL1
30M,24M
PLL2
36M,27M
TGCLK_SEL1
TGCLK_EN
VCLK_EN
TGCLK_PD
VCLK_PD
2
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
0
0
1
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
Fixed to L
Power-Down
Power-Down
1
0
1
0
1
0
1
0
Fixed to L
Normal
operation
Power-Down
Fixed to L
Normal
operation
Power-Down
24MHz output
30MHz output
36MHz output
36MHz output
Normal
operation
Power-Down
Normal
operation
Power-Down
1
0
1
Normal
operation
Power-Down
Fixed to L
Normal
operation
Power-Down
24MHz output
30MHz output
36MHz output
36MHz output
Normal
operation
Power-Down
Normal
operation
Power-Down
12MHz
output
Fixed to L
Fixed to L
Power-Down
27MHz
output
Normal
operation
1
Normal
operation
Fixed to L
Power-Down
Fixed to L
24MHz output
30MHz output
36MHz output
36MHz output
Normal
operation
Power-Down
Normal
operation
Fixed to L
Power-Down
27MHz
output
24MHz output
30MHz output
36MHz output
36MHz output
Normal
operation
Power-Down
12/16
●BU2394KN Application Circuit
/
Description of Terminal
for Video
14.318182MHz
0.1uF
17.734450MHz
for USB
DATA
PLL1
135.000000MHz
108.000000MHz
110.000000MHz
98.181818MHz
48.008022MHz
CLK1
CLK2
11
16
4
5
XIN
XTAL
OSC
1
2
AVDD
AVDD
:
15 VDD1
:
XOUT
14 VDD1
:
:
48.008022MHz
PLL2
PLL3
1
1
4
/
0.1uF
0.1uF
BU2394KN
VQFN-20
3
AVSS
:
13 VSS1
:
1
2
/
4
:
XIN
12
:CLK2ON
XTAL_SEL
CLK2ON
7
11
12
10
9
5
:
XOUT
:CLK1OUT
R
for CCD
17.734450MHz
14.318182MHz
135.000000MHz
110.000000MHz
108.000000MHz
98.181818MHz
10
/
FS1
FS2
REF_CLK
19
FS3
8
Fig.76
Fig.75
Description of Terminal
PIN No.
1
PIN NAME
AVDD
Function
Analog power source
Analog power source
Analog GND
2
AVDD
AVSS
3
4
XIN
Crystal IN
5
XOUT
Crystal OUT
6
TEST1
XTAL_SEL
FS3
TEST pin, normally open, equipped with pull-down
7
Crystal oscillator selection, H: 28.636 MHz, L: 14.318 MHz, equipped with pull-up
CLK1,2 output selection, equipped with pull-up
CLK1,2 output selection, equipped with pull-up
REFCLK output selection, equipped with pull-up
110M/98M/108M/135M output
8
9
FS2
10
11
12
13
14
15
16
17
18
19
20
FS1
CLK1OUT
CLK2ON
VSS1
CLK2 output control, H: Enable, L: Disable, equipped with pull-up
CLK1/CLK2 & Internal digital GND
VDD1
CLK1/2 & Internal digital power supply
CLK1/2 & Internal digital power supply
48M output
VDD1
CLK2OUT
VSS2
REFCLK GND
VDD2
REFCLK power supply
REF_CLK
TEST2
14.3M/17.7M output
TEST pin, normally open, equipped with pull-down
Note) Basically, mount ICs to the substrate for use. If the ICs are not mounted to the substrate, the characteristics of ICs may
not be fully demonstrated.
Mount 0.1uF as bypass capacitors in the vicinity of the IC pins between 1&2 PIN and 3PIN, 13PIN and 14&15PIN, and
17PIN and 18PIN, respectively.
※Even though we believe that the example of the application circuit is worth of a recommendation, please be sure to
thoroughly recheck the characteristics before use.
※As to the jitters, the TYP values vary with the substrate, power supply, output loads, noises, and others.
Besides, for the use, the operating margin should be thoroughly checked.
13/16
●BU2396KN Application Circuit
/
Description of Terminal
XIN
4
5
XTAL
OSC
12.000000MHz
UCLK
XOUT
16
for Video
27.000000MHz
TGCLK_EN
0.1uF
10
7
for USB
12.000000MHz
DATA
PLL1
TGCLK_SEL2
30.000000MHz
24.000000MHz
11 TGCLK
36.000000MHz
1
:
2
:
3
:
AVDD
AVDD
AVSS
15 VDD1
:
8
9
TGCLK_SEL1
TGCLK_PD
14 VDD1
:
0.1uF
0.1uF
1
6
/
BU2396KN
VQFN-20
13 VSS1
:
4
:
XIN
12 VCLK_EN
:
11 TGCLK
:
1
8
/
5
:
XOUT
PLL2
VCLK
19
for
R
CCD
36.000000MHz
30.000000MHz
24.000000MHz
27.000000MHz
20
12
VCLK_PD
VCLK_EN
Fig.77
Fig.78
Description of Terminal
PIN No.
1
PIN NAME
AVDD
Function
Analog power source
Analog power source
Analog GND
2
AVDD
3
AVSS
4
XIN
Crystal IN
5
XOUT
Crystal OUT
6
TEST
TEST pin, normally open, equipped with pull-down
TGCLK frequency selection, equipped with pull-up
TGCLK frequency selection, equipped with pull-up
7
TGCLK_SEL2
TGCLK_SEL1
TGCLK_PD
TGCLK_EN
TGCLK
VCLK_EN
VSS1
8
9
TGCLK Power-Down control, H:enable, L:Power-Down, equipped with pull-down
TGCLK output control, H: Enable, L: Output fixed to L, equipped with pull-down
36M, 30M, 24M output
10
11
12
13
14
15
16
17
18
19
20
VCLK output control, H:enable, L: Output fixed to L, equipped with pull-down
TGCLK,UCLK & Internal digital GND
VDD1
TGCLK,UCLK & Internal digital power supply
TGCLK,UCLK & Internal digital power supply
12M output
VDD1
UCLK
VSS2
VCLK GND
VDD2
VCLK power source
VCLK
27M output
VCLK_PD
VCLK Power-Down control, H:enable, L:Power-Down, equipped with pull-down
Note) Basically, mount ICs to the substrate for use. If the ICs are not mounted to the substrate, the characteristics of ICs may
not be fully demonstrated.
Mount 0.1uF as bypass capacitors in the vicinity of the IC pins between 1&2 PIN and 3PIN, 13PIN and 14&15PIN, and
17PIN and 18PIN, respectively.
※Even though we believe that the example of the application circuit is worth of a recommendation, please be sure to
thoroughly recheck the characteristics before use.
※As to the jitters, the TYP values vary with the substrate, power supply, output loads, noises, and others. Besides, for the
use, the operating margin should be thoroughly checked.
14/16
●Cautions on use
(1) Absolute Maximum Ratings
An excess in the absolute maximum ratings, such as applied voltage (VDD or VIN), operating temperature range (Topr),
etc., can break down devices, thus making impossible to identify breaking mode such as a short circuit or an open circuit.
If any special mode exceeding the absolute maximum ratings is assumed, consideration should be given to take
physical safety measures including the use of fuses, etc.
(2) Recommended operating conditions
These conditions represent a range within which characteristics can be provided approximately as expected. The
electrical characteristics are guaranteed under the conditions of each parameter.
(3) Reverse connection of power supply connector
The reverse connection of power supply connector can break down ICs. Take protective measures against the
breakdown due to the reverse connection, such as mounting an external diode between the power supply and the IC’s
power supply terminal.
(4) Power supply line
Design PCB pattern to provide low impedance for the wiring between the power supply and the GND lines.
In this regard, for the digital block power supply and the analog block power supply, even though these power supplies
has the same level of potential, separate the power supply pattern for the digital block from that for the analog block,
thus suppressing the diffraction of digital noises to the analog block power supply resulting from impedance common to
the wiring patterns. For the GND line, give consideration to design the patterns in a similar manner.
Furthermore, for all power supply terminals to ICs, mount a capacitor between the power supply and the GND terminal.
At the same time, in order to use an electrolytic capacitor, thoroughly check to be sure the characteristics of the
capacitor to be used present no problem including the occurrence of capacity dropout at a low temperature, thus
determining the constant.
(5) GND voltage
Make setting of the potential of the GND terminal so that it will be maintained at the minimum in any operating state.
Furthermore, check to be sure no terminals are at a potential lower than the GND voltage including an actual electric
transient.
(6) Short circuit between terminals and erroneous mounting
In order to mount ICs on a set PCB, pay thorough attention to the direction and offset of the ICs. Erroneous mounting
can break down the ICs. Furthermore, if a short circuit occurs due to foreign matters entering between terminals or
between the terminal and the power supply or the GND terminal, the ICs can break down.
(7) Operation in strong electromagnetic field
Be noted that using ICs in the strong electromagnetic field can malfunction them.
(8) Inspection with set PCB
On the inspection with the set PCB, if a capacitor is connected to a low-impedance IC terminal, the IC can suffer stress.
Therefore, be sure to discharge from the set PCB by each process. Furthermore, in order to mount or dismount the set
PCB to/from the jig for the inspection process, be sure to turn OFF the power supply and then mount the set PCB to the
jig. After the completion of the inspection, be sure to turn OFF the power supply and then dismount it from the jig. In
addition, for protection against static electricity, establish a ground for the assembly process and pay thorough attention
to the transportation and the storage of the set PCB.
(9) Input terminals
In terms of the construction of IC, parasitic elements are inevitably formed in relation to potential. The operation of the
parasitic element can cause interference with circuit operation, thus resulting in a malfunction and then breakdown of
the input terminal. Therefore, pay thorough attention not to handle the input terminals, such as to apply to the input
terminals a voltage lower than the GND respectively, so that any parasitic element will operate. Furthermore, do not
apply a voltage to the input terminals when no power supply voltage is applied to the IC. In addition, even if the power
supply voltage is applied, apply to the input terminals a voltage lower than the power supply voltage or within the
guaranteed value of electrical characteristics.
(10) Ground wiring pattern
If small-signal GND and large-current GND are provided, It will be recommended to separate the large-current GND
pattern from the small-signal GND pattern and establish a single ground at the reference point of the set PCB so that
resistance to the wiring pattern and voltage fluctuations due to a large current will cause no fluctuations in voltages of
the small-signal GND. Pay attention not to cause fluctuations in the GND wiring pattern of external parts as well.
(11) External capacitor
In order to use a ceramic capacitor as the external capacitor, determine the constant with consideration given to a
degradation in the nominal capacitance due to DC bias and changes in the capacitance due to temperature, et
15/16
●Name selection of ordered type
-
B
U
2
3
9
X
K
N
E
2
Part No.
Type
Package Type
Packing specification
2394, 2396
KN:VQFN20
E2: Reel-like emboss taping
VQFN20
<Tape and Reel information>
<Dimension>
Embossed carrier tape(with dry pack)
Tape
4.2 0.1
4.0 0.1
2500pcs
E2
Quantity
(1.1)
16
15
11
3
−
10
Direction
of feed
(0
.35)
(0
.5)
(The direction is the 1pin of product is at the upper left when you hold
reel on the left hand and you pull out the tape on the right hand)
6
20
(0.22)
1
5
0.5
0.22 0.05
0.05
(0.6−+00..31
)
0.05
Direction of feed
1pin
Reel
(Unit:mm)
※When you order , please order in times the amount of package quantity.
Catalog No.08T802A '08.9 ROHM ©
Appendix
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM
CO.,LTD.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you
wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM
upon request.
Examples of application circuits, circuit constants and any other information contained herein illustrate the
standard usage and operations of the Products. The peripheral conditions must be taken into account
when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document. However, should
you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no re-
sponsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and examples
of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to
use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no re-
sponsibility whatsoever for any dispute arising from the use of such technical information.
The Products specified in this document are intended to be used with general-use electronic equipment
or devices (such as audio visual equipment, office-automation equipment, communication devices, elec-
tronic appliances and amusement devices).
The Products are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or
malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard against the
possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as
derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your
use of any Product outside of the prescribed scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or system
which requires an extremely high level of reliability the failure or malfunction of which may result in a direct
threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment,
aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear
no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intend-
ed to be used for any such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may be controlled under
the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
THE AMERICAS / EUROPE / ASIA / JAPAN
ROHM Customer Support System
Contact us : webmaster@ rohm.co.jp
www.rohm.com
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Copyright © 2009 ROHM CO.,LTD.
21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
Appendix-Rev4.0
相关型号:
©2020 ICPDF网 联系我们和版权申明