BP5062 [ROHM]

AC100V input, −12V/500mA output; AC100V输入， -12V / 500mA的输出


型号：	BP5062
厂家：	ROHM
描述：	AC100V input, −12V/500mA output AC100V输入， -12V / 500mA的输出
文件：	总3页 (文件大小：39K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

AC/DC converter

AC100V input, −12V/500mA output

BP5062

Dimension(Unit : mm)

Absolute Maximum Ratings

Parameter

Input voltage

Symbol

Limits

−190

Unit

9.9MAX.

34.5MAX.

Output current

500

°C

ESD endurance

Vsurge

Topr

Tstg

Operating temperature range

Storage temperature range

−20 +80

−25 +105

10 12

0.25±0.05

0.5±0.1

P=5.08±0.2

2.54×11=27.94

1.3±0.2

5.05MAX.

4.85MAX.

3.3MAX

Electrical Characteristics

Derating Curve

600

Parameter

Input voltage range

Output voltage

Symbol Min.

Typ.

Max.

Conditions

DC (80 127VAC)

Vi=−141V, Io=300mA

Vi=−141V

Unit

−113

−180

−13.0

500

−141

500

400

300

−11.0

−12.0

−

Output current

−

Operation Range

Line regulation

Vi=−113V

−170V, Io=300mA

0.15

0.20

0.15

−

0.05

0.07

0.05

200

100

Load regulation

Output ripple voltage

Power conversion effciency

Vi=−141V, Io=0 300mA

Vi=−141V, Io=300mA

Vi=−141V, Io=500mA

−

Vp-p

−

-30 -20 -10

0 10 20 30 40 50 60 70 80 90

Ambient Temperature Ta(°C)

1 Maximum output current varies depending on ambient temperature ; please refer to derating curve.

2 Spike noise is not included in output ripple voltage.

Conversion Efficiency

(Ta=25°C, Vi=−141V)

100

Application circuit

Pin No.

Function

Output terminal Vo(−12V)

Not used

Coil connect

Not used

Coil connect

Not used

COMMON

Not used

BP5062

100

200

300

400

500

Please note that pin No.12

side is input.

Output Current Io(mA)

Load Regulation

N.C.

Not used

Input terminal Vi(−141VDC)

12 10 8 7

^F2^UA^SE

Load Regulation

(Ta=25°C, Vi=−141V)

10Ω1/4W

Output

−12V

1SR139-400

470µH

Input

AC100V

50Hz/60Hz

ZNR

220V

−

220µF/50V

0.1µF

47µF/200V

Be sure to use fuse for safety.

For acutual usage, Please kindly evaluate and confirm our part mounted in your product,

Especially, Please make sure to confirm whether the load current exceed Max. rated current

by using the current probe.

100 200 30 400 500 600 700

Output Current Io(mA)

Surface Temperature Rising

External components setting

(Ta=25°C, Vi=−141V)

FUSE: Fuse

Please make sure to use quick acting fuse 2A

C1: Capacitor for input

voltage smoothing

Capacitance : 47µF Rated voltage : 200V or higher

Ripple current is 0.22Arms above.

Capacitance : 0.1µF 0.22µF Rated voltage : 200V or higher

Film capacitor or ceramic capacitor. Reduce the noise terminal voltage.

The constant value should be evaluated in the set.

C2: For noise terminal

voltage reduction

100

200

300

400

500

C3: Capacitor for Output

voltage smooting

Capacitance : 220µF 470µF Rated voltage : 25V or higher,

ESR is 0.25Ω max. Ripple current is 0.4Arms above.

Output Current Io(mA)

Output noise voltage is infulenced.Please evaluate it in the actual set.

D1: Rectifier diode

In the absolute maximum ratings, the reverse peak voltage should be

400V or higher, the average rectifying current should be 1A or higher,

and the peak surge current should be 40A or higher.

(Full-wave rectifier can be used in out part.)

Coil for switching regulator. The inductance should be 470µH,

the rated direct current should be 1.0A above.

L1: Choke coil

Otherwise heating or abnormal oscilation occurs.

10Ω 22Ω 1/4W

R1: For noise terminal

voltage reduction

Reduce the noise terminal voltage.The constant value should be evaluated

in set.

Varistor must be used. It protects this part from lightning surge and static

ZNR: Varistor

electricity.

1/2

Precautions on Use of ROHM Power Module

Safety Precautions

1) The products are designed and produced for application in ordinary electronic equipment (AV equipment,

OA equipment, telecommunication equipment, home appliances, amusement equipment etc.).

If the products are to be used in devices requiring extremely high reliability (medical equipment, transport

equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car

accessories, safety devices, etc.) and whose malfunction or operational error may endanger human life

and sufficient fail-safe measures, please consult with the Company's sales staff in advance. If product

malfunctions may result in serious damage, including that to human life, sufficient fail-safe measures

must be taken, including the following:

[a] Installation of protection circuits or other protective devices to improve system safety

[b] Installation of redundant circuits in the case of single-circuit failure

2) The products are designed for use in a standard environment and not in any special environments.

Application of the products in a special environment can deteriorate product performance. Accordingly,

verification and confirmation of product performance, prior to use, is recommended if used under the

following conditions:

[a] Use in various types of liquid, including water, oils, chemicals, and organic solvents

[b] Use outdoors where the products are exposed to direct sunlight, or in dusty places

[c] Use in places where the products are exposed to sea winds or corrosive gases, including

Cl2, H2S, NH3, SO2, and NO2

[d] Use in places where the products are exposed to static electricity or electromagnetic waves

[e] Use in proximity to heat-producing components, plastic cords, or othe flammable items

[f] Use involving sealing or coating the products with resin or other coating materials

[g] Use involving unclean solder or use of water or water-soluble cleaning agents for cleaning after

soldering

[h] Use of the products in places subject to dew condensation

3) The products are not radiation resistant.

4) The Company is not responsible for any problems resulting from use of the products under conditions not

recommended herein.

5) The Company should be notified of any product safety issues. Moreover, product safety issues should be

periodically monitored by the customer.

Precautions Regarding Application Example and External Circuits

1) If change is made to the constant of an external circuit, allow a sufficient margin due to variations of the

characteristics of the products and external components, including transient characteristics, as well as

static characteristics. Please be informed that the Company has not conducted investigations on whether

or not particular changes in the application examples or external circuits would result in the infringement

of patent rights of a third party.

2) The application examples, their constants, and other types of information contained herein are applicable

only when the products are used in accordance with standard methods.

Therefore, if mass production is intended, sufficient consideration to external conditions must be made.

Prohibitions Regarding Industrial Property

1) These Specifications contain information related to the Company’s industrial property. Any use of them

other than pertaining to the usage of appropriate products is not permitted. Duplication of these

Specifications and its disclosure to a third party without the Company’s permission is prohibited.

2) Information and data on products, including application examples, contained in these specifications are

simply for reference; the Company does not guarantee any industrial property rights, intellectual property

rights, or any other rights of a third party regarding this information or data. Accordingly, the Company

does not bear any responsibility for:

[a] infringement of the intellectual property rights of a third party

[b] any problems incurred by the use of the products listed herein.

3) The Company prohibits the purchaser of its products to exercise or use the intellectual property rights,

industrial property rights, or any other rights that either belong to or are controlled by the Company, other

than the right to use, sell, or dispose of the products.

2/2

Appendix

Notes

No technical content pages of this document may be reproduced in any form or transmitted by any

means without prior permission of ROHM CO.,LTD.

The contents described herein are subject to change without notice. The specifications for the

product described in this document are for reference only. Upon actual use, therefore, please request

that specifications to be separately delivered.

Application circuit diagrams and circuit constants contained herein are shown as examples of standard

use and operation. Please pay careful attention to the peripheral conditions when designing circuits

and deciding upon circuit constants in the set.

Any data, including, but not limited to application circuit diagrams information, described herein

are intended only as illustrations of such devices and not as the specifications for such devices. ROHM

CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any

third party's intellectual property rights or other proprietary rights, and further, assumes no liability of

whatsoever nature in the event of any such infringement, or arising from or connected with or related

to the use of such devices.

Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or

otherwise dispose of the same, no express or implied right or license to practice or commercially

exploit any intellectual property rights or other proprietary rights owned or controlled by

ROHM CO., LTD. is granted to any such buyer.

Products listed in this document use silicon as a basic material.

Products listed in this document are no antiradiation design.

The products listed in this document are designed to be used with ordinary electronic equipment or devices

(such as audio visual equipment, office-automation equipment, communications devices, electrical

appliances and electronic toys).

Should you intend to use these products with equipment or devices which require an extremely high level of

reliability and the malfunction of with would directly endanger human life (such as medical instruments,

transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other

safety devices), please be sure to consult with our sales representative in advance.

About Export Control Order in Japan

Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control

Order in Japan.

In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)

on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.

Appendix1-Rev1.0

BP5062 [ROHM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E