PT6603E [ROCHESTER]
9A SWITCHING REGULATOR, 725kHz SWITCHING FREQ-MAX, PSMA14, SIP-14;![PT6603E](http://pdffile.icpdf.com/pdf2/p00241/img/icpdf/PT6606E_1455121_icpdf.jpg)
型号: | PT6603E |
厂家: | ![]() |
描述: | 9A SWITCHING REGULATOR, 725kHz SWITCHING FREQ-MAX, PSMA14, SIP-14 输入元件 开关 |
文件: | 总10页 (文件大小:2539K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PT6600 Series
9 Amp 5V/3.3V Input Adjustable
Integrated Switching Regulator
SLTS035A
(Revised 6/30/2000)
• Single Device 9A Output
• Input Voltage Range: 3.1V to 6.0V
• Adjustable Output Voltage
• 90% Efficiency
• Remote Sense Capability
• Standby Function
In-line Package) Integrated Switching
Regulators (ISRs), designed for stand-
alone operation in applications
requiring as much as 9A of output
current.
The PT6600 series will operate
off either a 3.3V or 5V input bus and
requires only two external capacitors
for proper operation. Please note that
this product does not include short
circuit protection.
• Over-Temperature Protection
The PT6600 series is a high per-
formance family of 14-Pin SIP (Single
Pin-Out Information Ordering Information PT Series Suffix
(PT1234X)
PT 6601! = +3.3 Volts
Case/Pin
Configuration
Heat
Heat Spreader
Pin Function
†
Spreader with Side Tabs
PT 6602! = +1.5 Volts
PT 6603! = +2.5 Volts
PT 6604! = +3.6 Volts
PT 6605! = +1.2 Volts
PT 6606! = +1.8 Volts
†3.3V Input Bus Capable
1
2
3
4
5
6
Remote Sense
Do not connect
STBY*-Standby
Vin
Vin
Vin
Vertical Through-Hole
Horizontal Through-Hole
Horizontal Surface Mount
P
D
E
R
G
B
Standard Application
†
†
VoADJ
VoSENSE
14
1
7
8
GND
G
VIN
VOUT
4,5,6
11,12,13
PT6600
ND
ND
+
+
3
7,8,9,10
9
G
CIN
COUT
LOAD
10
11
12
13
14
GND
Vout
Vout
Vout
STBY
COM
Q1
Pkg Style 400
COM
Note: Back surface
of product is
conducting metal.
Vout Adjust
C1 = Required 330µF electrolytic (1)
C2 = Required 330µF electrolytic (1)
Q1= NFET-or Open Collector Gate
Specifications
PT6600 SERIES
Characteristics
(T = 25°C unless noted)
a
Symbols
Conditions
Min
Typ
Max
Units
(2)
(2)
(4)
(4)
Output Current
Io
Ta = 60°C, 200 LFM, pkg P
Ta = 25°C, natural convection
0.1
—
—
9.0
7.0
A
0.1
Input Voltage Range
Vin
0.1A ≤ Io ≤ 8.0A
Vo= +2.5/3.3V
4.5
3.1
4.8
—
—
—
6.0
6.0
6.0
V
o ≤ 1.8V
V
V
Vo= +3.6V
Output Voltage Tolerance
∆Vo
Vin = +5V, Io = 8.0A
Ta = 0°C to 65°C
Vo-0.1
—
Vo+0.1
Output Voltage Adjust Range
Voadj
Pin 14 to Vo or ground
Vo= +3.3V
Vo= +1.5V
Vo= +2.5V
Vo= +3.6V
2.25
1.27
1.80
2.50
—
—
—
—
4.20
2.65
3.50
4.30
V
inmin=+3.1V or Vo+1.2V
V
(whichever is greater)
Line Regulation
Load Regulation
Vo Ripple/Noise
Regline
Regload
Vn
4.5V ≤ Vin ≤ 6.0V, Io = 8.0A
3.1V ≤ Vin ≤ 6.0V, Io = 8.0A
4.5V ≤ Vin ≤ 6.0V, Io = 8.0A
Vo= +3.3V
Vo= +1.5V
Vo= +2.5V
—
—
—
7
3
7
17
8
mV
13
Vin = +5V, 0.1 ≤ Io ≤ 8.0A
Vo= +3.3V
Vo= +1.5V
Vo= +2.5V
—
—
—
17
12
13
33
23
25
mV
Vin = 5V, Io = 8.0A
—
50
—
mVpp
Transient Response
with C2 = 330µF
ttr
Io step between 4.0A and 8.0A
Vo over/undershoot
—
—
100
150
—
—
µSec
mV
Vos
Efficiency
η
Vin = +5V, Io = 3.0A
Vo = +3.3/3.6V
Vo = +1.5V
—
—
—
90
76
85
—
—
—
%
Vo = +2.5V
Vin = +5V, Io = 8.0A
Vo = +3.3/3.6V
Vo = +1.5V
—
—
—
83
68
76
—
—
—
%
Vo = +2.5V
Switching Frequency
ƒo
3.1V ≤ Vin ≤ 6.0V
0.1A ≤ Io ≤ 8.0A
475
600
725
kHz
Absolute Maximum
Ta
θja
Over Vin range
–40 (3)
—
—
25
+85 (4)
—
°C
Operating Temperature Range
Thermal Resistance
Free Air Convection (40-60 LFM)
°C/W
Continued
For technical support and more information, see inside back cover or visit www.ti.com/powertrends
PT6600 Series
9 Amp 5V/3.3V Input Adjustable
Integrated Switching Regulator
Specifications (continued)
PT6600 SERIES
Characteristics
(T = 25°C unless noted)
Symbols
Ts
Conditions
Min
-40
—
Typ
—
Max
+125
—
Units
°C
a
Storage Temperature
Mechanical Shock
—
—
Per Mil-STD-883D, Method 2002.3
500
G’s
Mechanical Vibration
—
Per Mil-STD-883D, Method 2007.2,
20-2000 Hz, soldered in a PC board
—
—
7.5
14
—
—
G’s
Weight
—
—
grams
Notes: (1) The PT6600 series requires two 330µF electrolytic capacitors (input and output) for proper operation in all applications. The input capacitance must be rated for a minimum of
1.1Arms of ripple current. See the application note, PT6500/6600 Series Capacitor Recommendations.
(2) ISR will operate down to no load with reduced specifications.
(3) For operation below 0°C, use tantalum capacitors for CIN and COUT. For more information, contact an Application Specialist.
(4) See Safe Operating Curves, or contact the factory for the appropriate derating.
T Y P I C A L
C H A R A C T E R I S T I C S
Safe Operating Area Curves (@ V =+5.0V) (See Note B)
PT6601, 3.3 VDC
(See Note A)
in
PT6601P (Vertical)
Efficiency vs Output Current
90
100
90
80
70
60
50
40
80
70
Airflow
Vin
4.5V
300 LFM
60
150 LFM
5.0V
5.5V
60 LFM
Nat Conv
50
40
30
20
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
Output Current (Amps)
Iout-(Amps)
PT6601D (Horizontal)
Ripple vs Output Current
90
80
70
60
50
40
30
20
30
25
20
15
10
5
Airflow
300 LF M
150 LF M
60 LF M
Vin
5.5V
5.0V
4.5V
Nat Conv.
0
1
2
3
4
5
6
7
8
9
0
0
1
2
3
4
5
6
7
8
9
Output Current (Amps)
Iout-(Amps)
PT6601R (Vertical with Side Tab)
Power Dissipation vs Output Current
9
8
7
6
5
4
3
2
1
0
90
80
70
60
50
40
30
20
Airflow
300 LF M
150 LF M
60 LFM
Vin
5.5V
5.0V
4.5V
Nat Conv
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
P
Output Current (Amps)
Iout-(Amps)
Note A: All data listed in the above graphs has been developed from actual products tested at 25°C. This data is considered typical data for the ISR.
Note B: SOA curves represent operating conditions at which internal components are at or below manufacturer’s maximum rated operating temperatures.
For technical support and more information, see inside back cover or visit www.ti.com/powertrends
Application Notes
PT6600 Series
Figure 1
Adjusting the Output Voltage of the
PT6600 5V Bus Converters
1
The output voltage of the Power Trends PT6600 Series
ISRs may be adjusted higher or lower than the factory
trimmed pre-set voltage with the addition of a single
external resistor. Table 1 accordingly gives the allowable
adjustment range for each model in the series as Va (min)
and Va (max).
V o(sense)
4,5,6
11,12,13
V in
V out
Vin
PT6600
Vo
STBY
G N D
V o(adj)
3
7,8,9,10 14
(R1)
Adj Down
L
O
A
D
+
+
Cin
Cout
Adjust Up:
An increase in the output voltage is
R2
obtained by adding a resistor R2, between pin 14 (Vo ad-
just) and pins 7-10 (GND).
Adjust
Up
COM
COM
Adjust Down:
Add a resistor (R1), between pin 14 (Vo
adjust) and pins 11-13 (Vout).
The values of (R1) [adjust down], and R2 [adjust up], can
also be calculated using the following formulae.
Refer to Figure 1 and Table 2 for both the placement and value
of the required resistor, either (R1) or R2 as appropriate.
Ro (Va – 1.0)
(Vo – Va)
(R1)
R2
=
=
– Rs kΩ
Notes:
1. Use only a single 1% resistor in either the (R1) or R2
location. Place the resistor as close to the ISR as
possible.
2. Never connect capacitors from Vo adjust to either
GND, Vout, or the Remote Sense pin. Any
capacitance added to the Vo adjust pin will affect the
stability of the ISR.
3. If the Remote Sense feature is being used,
connecting the resistor (R1) between pin 14 (Vo
adjust) and pin 1 (Remote Sense) can benefit load
regulation.
Ro
Va - Vo
– Rs
kΩ
Where: Vo = Original output voltage
Va = Adjusted output voltage
Ro = The resistance value in Table 1
Rs = The series resistance from Table 1
4. The minimum input voltage required by the part is
Vout + 1.2 or 3.1V, whichever is higher.
Table 1
PT6600 ADJUSTMENT AND FORMULA PARAMETERS
Series Pt #
PT6605
PT6607
PT6602
PT6608
PT6606
PT6603
PT6601
PT6604
V (nom)
1.2
1.3
1.5
1.7
1.8
2.5
3.3
2.25
4.2
3.6
2.5
o
V (min)
a
1.14
2.35
2.49
2.0
1.19
2.45
2.49
2.0
1.27
2.65
2.49
2.0
1.36
2.85
2.49
2.0
1.4
1.8
V (max)
a
2.95
2.49
2.0
3.5
4.3
R (kΩ)
o
4.99
4.22
12.1
12.1
10.0
12.1
R (kΩ)
s
For technical support and more information, see inside back cover or visit www.ti.com/powertrends
Application Notes continued
PT6600 Series
Table 2
PT6600 ADJUSTMENT RESISTOR VALUES
Series Pt #
V (nom)
PT6605
1.2
PT6607
1.3
PT6602
1.5
PT6608
1.7
PT6606
1.8
PT6603
2.5
PT6601
3.3
PT6604
3.6
o
V (req’d)
a
1.15
1.2
(5.5)kΩ
(3.0)kΩ
1.25
1.3
47.8kΩ
22.9kΩ
14.6kΩ
10.5kΩ
8.0kΩ
6.3kΩ
5.1kΩ
4.2kΩ
3.5kΩ
3.0kΩ
2.5kΩ
2.2kΩ
1.8kΩ
1.6kΩ
1.3kΩ
1.1kΩ
0.9kΩ
0.8kΩ
0.6kΩ
0.5kΩ
0.4kΩ
0.3kΩ
0.2kΩ
(10.5)kΩ
(1.7)kΩ
(3.8)kΩ
(8.0)kΩ
(20.4)kΩ
1.35
1.4
47.8kΩ
22.9kΩ
14.6kΩ
10.5kΩ
8.0kΩ
6.3kΩ
4.1kΩ
4.2kΩ
3.5kΩ
3.0kΩ
2.5kΩ
2.2kΩ
1.8kΩ
1.6kΩ
1.3kΩ
1.1kΩ
0.9kΩ
0.8kΩ
0.6kΩ
0.5kΩ
0.4kΩ
0.3kΩ
0.2kΩ
(1.3)kΩ
(2.5)kΩ
(4.2)kΩ
(7.1)kΩ
(12.9)kΩ
(30.4)kΩ
(0.5)kΩ
(1.2)kΩ
(2.2)kΩ
(3.5)kΩ
(5.5)kΩ
(8.8)kΩ
(15.4)kΩ
(35.4)kΩ
1.45
1.5
1.55
1.6
47.8kΩ
22.9kΩ
14.6kΩ
10.5kΩ
8.0kΩ
6.3kΩ
5.1kΩ
4.2kΩ
3.5kΩ
3.0kΩ
2.5kΩ
2.2kΩ
1.8kΩ
1.6kΩ
1.3kΩ
1.1kΩ
0.9kΩ
0.8kΩ
0.6kΩ
0.5kΩ
0.4kΩ
0.3kΩ
0.2kΩ
1.65
1.7
1.75
1.8
47.8kΩ
22.9kΩ
14.6kΩ
10.5kΩ
8.0kΩ
6.3kΩ
5.1kΩ
4.2kΩ
3.5kΩ
3.0kΩ
2.5kΩ
2.2kΩ
1.8kΩ
1.6kΩ
1.3kΩ
1.1kΩ
0.9kΩ
0.8kΩ
0.6kΩ
0.5kΩ
0.4kΩ
0.3kΩ
0.2kΩ
(1.5)kΩ
(2.3)kΩ
1.85
1.9
47.8kΩ
22.9kΩ
14.6kΩ
10.5kΩ
8.0kΩ
6.3kΩ
5.1kΩ
4.2kΩ
3.5kΩ
3.0kΩ
2.5kΩ
2.2kΩ
1.8kΩ
1.6kΩ
1.3kΩ
1.1kΩ
6.9kΩ
0.8kΩ
0.6kΩ
0.5kΩ
0.4kΩ
0.3kΩ
0.2kΩ
(3.3)kΩ
1.95
2.0
(4.4)kΩ
(5.8)kΩ
2.05
2.1
(7.4)kΩ
(9.5)kΩ
2.15
2.2
(12.2)kΩ
(15.7)kΩ
(20.7)kΩ
(28.2)kΩ
(40.7)kΩ
(65.6)kΩ
(140.0)kΩ
2.25
2.3
(2.3)kΩ
(3.6)kΩ
2.35
2.4
(5.1)kΩ
(6.7)kΩ
2.45
2.5
(8.5)kΩ
(10.6)kΩ
(12.9)kΩ
(15.6)kΩ
(18.6)kΩ
(22.2)kΩ
(26.4)kΩ
(31.5)kΩ
(37.6)kΩ
(45.4)kΩ
(55.3)kΩ
(68.6)kΩ
(115.0)kΩ
(254.0)kΩ
(1.5)kΩ
(2.7)kΩ
2.55
2.6
95.6kΩ
45.7kΩ
29.0kΩ
20.7kΩ
15.7kΩ
12.4kΩ
10.0kΩ
8.3kΩ
0.9kΩ
5.8kΩ
4.1kΩ
2.9kΩ
2.0kΩ
1.3kΩ
0.8kΩ
(3.9)kΩ
2.65
2.7
(5.3)kΩ
(6.8)kΩ
2.75
2.8
(8.5)kΩ
(10.4)kΩ
(12.6)kΩ
(15.0)kΩ
(17.9)kΩ
(21.2)kΩ
(29.9)kΩ
(42.9)kΩ
(64.6)kΩ
(108.0)kΩ
(238.0)kΩ
2.85
2.9
2.95
3.0
3.1
3.2
3.3
3.4
109.0kΩ
48.4kΩ
28.2kΩ
18.2kΩ
12.1kΩ
8.1kΩ
3.5
3.6
3.7
87.9kΩ
37.9kΩ
21.2kΩ
12.9kΩ
7.9kΩ
3.8
4/.
3.9
V
>3.8Vdc requires V >5.0Vdc !
in
out
4.0
5.2kΩ
4.1
3.0kΩ
4.2
1.3kΩ
4.6kΩ
4.3
2.2kΩ
R1 = (Blue)
R2 = Black
For technical support and more information, see inside back cover or visit www.ti.com/powertrends
Application Notes
PT6600 Series
Figure 1
Using the Standby Function on the
PT6600 5V Bus Converters
1
Vo(sense)
For applications requiring output voltage On/Off control,
the 14-pin PT6600 ISR series incorporates a standby
function. This function may be used in applications that
require power-up/shutdown sequencing, and wherever
there is a requirement for the output status of the module
to be controlled by external circuitry.
4,5,6
11,12,13
Vin
Vo
Vin
Vo
PT6600
STBY
GND
Vo(adj)
+
+
3
7,8,9,10 14
Cin
Cout
COM
COM
The standby function is provided by the STBY* control,
pin 3. If pin 3 is left open-circuit the regulator operates
normally, and provides a regulated output when a valid
supply voltage is applied to Vin (pins 4, 5, & 6) with re-
spect to GND (pins 7-10). If a low voltage2 is then
applied to pin-3 the regulator output will be disabled and
the input current drawn by the ISR will drop to less than
50mA4. The standby control may also be used to hold-off
the regulator output during the period that input power is
applied.
Q1
BSS138
Inhibit
+5V Vin
Turn-On Time: In the circuit of Figure 1, turning Q1 on applies a
low voltage to the Standby control (pin 3) and disables the
regulator ouput. Correspondingly, turning Q1 off releases the
low-voltage signal and enables the output. The PT6600 ISR
series regulators have a fast response and will provide a fully
regulated output voltage within 250 µsec. The actual turn-on
time will vary with load and the total amount of output capaci-
tance. The waveform of Figure 2 shows the typical output
voltage response of a PT6601 (3.3V) following the turn-off of
Q1 at time t = 0.0 secs. The waveform was measured with a
5Vdc input voltage, and 0.6Ω load.
The standby control pin is ideally controlled using an
open-collector (or open-drain) discrete transistor (See
Figure 1). It may also be driven directly from a dedicated
TTL3 compatible gate. Table 1 provides details of the
threshold requirements.
(2,3)
Table 1 Inhibit Control Thresholds
Parameter
Min
Max
Enable (V
Disable (V
)
)
1V
–0.1V
5V
0.35V
IH
IL
Notes:
1. The Standby/Inhibit control logic is similar for all Power
Trends’ modules, but the flexibility and threshold
tolerances will be different. For specific information on
this function for other regulator models, consult the
applicable application note.
Figure 2
2. The Standby control pin is ideally controlled using an
open-collector (or open-drain) discrete transistor and
requires no external pull-up resistor. The control input has
an open-circuit voltage of about 1Vdc. To disable the
regulator output, the control pin must be pulled to less
than 0.35Vdc with a low-level 0.5mA sink to ground.
3. The Standby input on the PT6600 series may be driven by
a differential output device, making it compatible with
TTL logic. A standard TTL logic gate will meet the
Vo (2V / Div)
0.35V VIL(max) requirement (Table 1 ) at 0.5mA IOL
Do not use devices that can drive the Standby control input
above 5Vdc.
.
-50
0
50
100
150
t ( s )
200
250
300
350
µ
4. When the regulator output is disabled the current drawn
from the input source is reduced to approximately 30–
40mA (50mA maximum).
For technical support and more information, see inside back cover or visit www.ti.com/powertrends
PACKAGE OPTION ADDENDUM
www.ti.com
30-Aug-2012
PACKAGING INFORMATION
Status (1)
Eco Plan (2)
MSL Peak Temp (3)
Samples
Orderable Device
Package Type Package
Drawing
Pins
Package Qty
Lead/
Ball Finish
(Requires Login)
PT6601B
PT6601D
PT6601E
PT6601ET
PT6601F
PT6601L
PT6601P
PT6601Q
PT6601S
PT6602D
PT6602E
PT6602F
PT6602G
PT6602L
PT6602M
PT6602P
PT6602Q
PT6602R
PT6603B
PT6603F
PT6603L
PT6603P
PT6603Q
PT6603R
PT6603S
PT6604B
PT6604D
PT6604E
PT6604F
PT6604G
OBSOLETE SIP MODULE
EEK
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
TBD
Pb-Free (RoHS)
Pb-Free (RoHS)
TBD
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
EEA
EEC
EEC
EEF
EEL
EED
EEQ
EES
EEA
EEC
EEF
EEG
EEL
EEM
EED
EEQ
EEE
EEK
EEF
EEL
EED
EEQ
EEE
EES
EEK
EEA
EEC
EEF
EEG
12
12
N / A for Pkg Type
Level-1-215C-UNLIM
Call TI
TBD
Call TI
TBD
Call TI
12
Pb-Free (RoHS)
TBD
N / A for Pkg Type
Call TI
TBD
Call TI
12
12
Pb-Free (RoHS)
Pb-Free (RoHS)
TBD
N / A for Pkg Type
Level-1-215C-UNLIM
Call TI
TBD
Call TI
TBD
Call TI
TBD
Call TI
12
12
Pb-Free (RoHS)
TBD
N / A for Pkg Type
Call TI
TBD
Call TI
Pb-Free (RoHS)
TBD
Level-1-215C-UNLIM
Call TI
12
12
Pb-Free (RoHS)
Pb-Free (RoHS)
TBD
Level-1-215C-UNLIM
N / A for Pkg Type
Call TI
12
Pb-Free (RoHS)
TBD
N / A for Pkg Type
Call TI
TBD
Call TI
TBD
Call TI
TBD
Call TI
TBD
Call TI
TBD
Call TI
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
30-Aug-2012
Status (1)
Eco Plan (2)
MSL Peak Temp (3)
Samples
Orderable Device
Package Type Package
Drawing
Pins
Package Qty
Lead/
Ball Finish
(Requires Login)
PT6604L
PT6604M
PT6604P
PT6604Q
PT6604R
PT6605B
PT6605E
PT6605ET
PT6605F
PT6605G
PT6605L
PT6605M
PT6605Q
PT6605R
PT6606B
PT6606F
PT6606L
PT6606M
PT6606Q
PT6606R
NRND
NRND
NRND
NRND
NRND
NRND
NRND
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
EEL
EEM
EED
EEQ
EEE
EEK
EEC
EEC
EEF
EEG
EEL
EEM
EEQ
EEE
EEK
EEF
EEL
EEM
EEQ
EEE
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
TBD
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
TBD
Call TI
TBD
Call TI
TBD
Call TI
TBD
Call TI
12
Pb-Free (RoHS)
Level-1-215C-UNLIM
Call TI
TBD
TBD
OBSOLETE SIP MODULE
Call TI
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
NRND
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
SIP MODULE
TBD
Call TI
TBD
Call TI
TBD
Call TI
TBD
Call TI
TBD
Call TI
TBD
Call TI
12
12
Pb-Free (RoHS)
TBD
Level-1-215C-UNLIM
Call TI
TBD
Call TI
TBD
Call TI
TBD
Call TI
Pb-Free (RoHS)
N / A for Pkg Type
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
30-Aug-2012
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 3
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明