1.5KE16CARL4 [ROCHESTER]
1500W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 41A-04, 2 PIN;
| 型号： | 1.5KE16CARL4 |
| 厂家： | 
Rochester Electronics |
| 描述： | 1500W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 41A-04, 2 PIN 局域网 二极管 电视 |
| 文件： | 总8页 (文件大小：889K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1.5KE6.8CA Series
1500 Watt Mosorb™ Zener
Transient Voltage Suppressors
Bidirectional*
Mosorb devices are designed to protect voltage sensitive
components from high voltage, high−energy transients. They have
excellent clamping capability, high surge capability, low zener
impedance and fast response time. These devices are
ON Semiconductor’s exclusive, cost-effective, highly reliable
Surmetic axial leaded package and are ideally-suited for use in
communication systems, numerical controls, process controls,
medical equipment, business machines, power supplies and many
other industrial/ consumer applications, to protect CMOS, MOS and
Bipolar integrated circuits.
http://onsemi.com
Specification Features:
• Working Peak Reverse Voltage Range − 5.8 V to 214 V
• Peak Power − 1500 Watts @ 1 ms
• ESD Rating of Class 3 (>16 KV) per Human Body Model
• Maximum Clamp Voltage @ Peak Pulse Current
• Low Leakage < 5 μA above 10 V
AXIAL LEAD
CASE 41A
PLASTIC
• UL 497B for Isolated Loop Circuit Protection
• Response Time is typically < 1 ns
L
Mechanical Characteristics:
1N6
CASE: Void-free, transfer-molded, thermosetting plastic
FINISH: All external surfaces are corrosion resistant and leads are
readily solderable
xxxCA
1.5KE
xxxCA
YYWW
MAXIMUM LEAD TEMPERATURE FOR SOLDERING PURPOSES:
230°C, 1/16″ from the case for 10 seconds
POLARITY: Cathode band does not imply polarity
MOUNTING POSITION: Any
L = Assembly Location
1N6xxxCA = JEDEC Device Code
1.5KExxxCA = ON Device Code
YY = Year
WW = Work Week
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
ORDERING INFORMATION
Peak Power Dissipation (Note 1.)
P
PK
1500
Watts
@ T ≤ 25°C
L
Device
Packaging
Shipping
500 Units/Box
Steady State Power Dissipation
P
D
5.0
Watts
1.5KExxCA
Axial Lead
@ T ≤ 75°C, Lead Length = 3/8″
L
Derated above T = 75°C
20
20
mW/°C
°C/W
°C
L
1.5KExxCARL4
Axial Lead 1500/Tape & Reel
Thermal Resistance, Junction−to−Lead
R
q
JL
Operating and Storage
Temperature Range
T , T
J
− 65 to
+175
stg
1. Nonrepetitive current pulse per Figure 4 and derated above T = 25°C per
A
Figure 2.
*Please see 1N6267A to 1N6306A (1.5KE6.8A − 1.5KE250A)
for Unidirectional Devices
© Semiconductor Components Industries, LLC, 2006
1
Publication Order Number:
August, 2006 − Rev. 3
1.5KE6.8CA/D
1.5KE6.8CA Series
ELECTRICAL CHARACTERISTICS
(T = 25°C unless otherwise noted)
A
I
I
PP
Symbol
Parameter
I
Maximum Reverse Peak Pulse Current
PP
I
T
I
V V
R
BR RWM
V
Clamping Voltage @ I
V
C
C
PP
V
I
R
T
V
V
V
V
RWM
Working Peak Reverse Voltage
RWM BR C
I
I
R
Maximum Reverse Leakage Current @ V
RWM
V
BR
Breakdown Voltage @ I
T
I
PP
I
T
Test Current
Bi−Directional TVS
QV
Maximum Temperature Coefficient of V
BR
BR
http://onsemi.com
2
1.5KE6.8CA Series
ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted.)
A
Breakdown Voltage
V
V
@ I (Note 3)
C
PP
V
RWM
V
BR
(Note 2) (Volts)
@ I
I
PP
(Note 1)
I
R
@ V
QV
BR
T
C
RWM
(Volts)
(μA)
Min
Nom
Max
(mA)
(Volts)
(A)
(%/°C)
Device
1.5KE6.8CA
1.5KE7.5CA
1.5KE8.2CA
1.5KE9.1CA
5.8
6.4
7.02
7.78
1000
500
200
50
6.45
7.13
7.79
8.65
6.8
7.5
8.2
9.1
7.14
7.88
8.61
9.55
10
10
10
1
10.5
11.3
12.1
13.4
143
132
124
112
0.057
0.061
0.065
0.068
1.5KE10CA
1.5KE11CA
1.5KE12CA
1.5KE13CA
8.55
9.4
10.2
11.1
10
5
5
9.5
10
11
12
13
10.5
11.6
12.6
13.7
1
1
1
1
14.5
15.6
16.7
18.2
103
96
90
0.073
0.075
0.078
0.081
10.5
11.4
12.4
5
82
1.5KE15CA
1.5KE16CA
1.5KE18CA
1.5KE20CA
12.8
13.6
15.3
17.1
5
5
5
5
14.3
15.2
17.1
19
15
16
18
20
15.8
16.8
18.9
21
1
1
1
1
21.2
22.5
25.2
27.7
71
67
59.5
54
0.084
0.086
0.088
0.09
1.5KE22CA
1.5KE24CA
1.5KE27CA
1.5KE30CA
18.8
20.5
23.1
25.6
5
5
5
5
20.9
22.8
25.7
28.5
22
24
27
30
23.1
25.2
28.4
31.5
1
1
1
1
30.6
33.2
37.5
41.4
49
45
40
36
0.092
0.094
0.096
0.097
1.5KE33CA
1.5KE36CA
1.5KE39CA
1.5KE43CA
28.2
30.8
33.3
36.8
5
5
5
5
31.4
34.2
37.1
40.9
33
36
39
43
34.7
37.8
41
1
1
1
1
45.7
49.9
53.9
59.3
33
30
28
0.098
0.099
0.1
45.2
25.3
0.101
1.5KE47CA
1.5KE51CA
1.5KE56CA
1.5KE62CA
40.2
43.6
47.8
53
5
5
5
5
44.7
48.5
53.2
58.9
47
51
56
62
49.4
53.6
58.8
65.1
1
1
1
1
64.8
70.1
77
23.2
21.4
19.5
17.7
0.101
0.102
0.103
0.104
85
1.5KE68CA
1.5KE75CA
1.5KE82CA
1.5KE91CA
58.1
64.1
70.1
77.8
5
5
5
5
64.6
71.3
77.9
86.5
68
75
82
91
71.4
78.8
86.1
95.5
1
1
1
1
92
16.3
14.6
13.3
12
0.104
0.105
0.105
0.106
103
113
125
1.5KE100CA
1.5KE110CA
1.5KE120CA
1.5KE130CA
85.5
94
102
111
5
5
5
5
95
100
110
120
130
105
116
126
137
1
1
1
1
137
152
165
179
11
0.106
0.107
0.107
0.107
105
114
124
9.9
9.1
8.4
1.5KE150CA
1.5KE160CA
1.5KE170CA
1.5KE180CA
128
136
145
154
5
5
5
5
143
152
162
171
150
160
170
180
158
168
179
189
1
1
1
1
207
219
234
246
7.2
6.8
6.4
6.1
0.108
0.108
0.108
0.108
1.5KE200CA
1.5KE220CA
1.5KE250CA
171
185
214
5
5
5
190
209
237
200
220
250
210
231
263
1
1
1
274
328
344
5.5
4.6
5
0.108
0.109
0.109
1. A transient suppressor is normally selected according to the maximum working peak reverse voltage (V
greater than the dc or continuous peak operating voltage level.
), which should be equal to or
RWM
2. V measured at pulse test current I at an ambient temperature of 25°C.
BR
T
3. Surge current waveform per Figure 4 and derate per Figures 1 and 2.
http://onsemi.com
3
1.5KE6.8CA Series
100
NONREPETITIVE
ꢀ
PULSE WAVEFORM
SHOWN IN FIGURE 4
100
80
60
10
40
20
0
1
0.1 μs 1 μs
10 μs
100 μs
1 ms
10 ms
0
25
50
75 100 125 150 175 200
T , AMBIENT TEMPERATURE (ꢀ C)
A
t , PULSE WIDTH
P
Figure 1. Pulse Rating Curve
Figure 2. Pulse Derating Curve
PULSE WIDTH (t ) IS
P
DEFINED AS THAT
tr ≤ 10 μs
PEAK VALUE − I
3/8″
POINT WHERE THE
PEAK CURRENT
DECAYS TO 50% OF I .
PP
100
50
0
3/8″
PP
5
4
3
I
PP
2
HALF VALUE −
2
t
P
1
0
0
1
2
3
4
0
25
50
75
100 125 150 175 200
T , LEAD TEMPERATURE (ꢀ C)
L
t, TIME (ms)
Figure 3. Steady State Power Derating
Figure 4. Pulse Waveform
1N6373, ICTE-5, MPTE-5,
through
1.5KE6.8CA
through
1N6389, ICTE-45, C, MPTE-45, C
1.5KE200CA
1000
500
1000
500
V
= 6.8 to 13 V
BR(NOM)
V
= 6.8 to 13 V
T = 25ꢀ C
P
T = 25ꢀ C
L
P
BR(NOM)
L
20 V
20 V
24 V
t
= 10 μs
t = 10 μs
43 V
43 V
24 V
200
100
50
200
100
50
75 V
20
20
180 V
10
5
10
5
120 V
2
1
2
1
0.3 0.5 0.7
1
2
3
5
7
10
20 30
0.3 0.5 0.7
1
2
3
5
7
10
20 30
ΔV , INSTANTANEOUS INCREASE IN V
ΔV , INSTANTANEOUS INCREASE IN V
BR
BR
BR BR
ABOVE V
(VOLTS)
ABOVE V
(VOLTS)
BR(NOM)
BR(NOM)
Figure 5. Dynamic Impedance
http://onsemi.com
4
1.5KE6.8CA Series
1
0.7
0.5
0.3
0.2
PULSE WIDTH
10 ms
0.1
0.07
0.05
1 ms
0.03
0.02
100 μs
10 μs
0.01
0.1
0.2
0.5
1
2
5
10
20
50 100
D, DUTY CYCLE (%)
Figure 6. Typical Derating Factor for Duty Cycle
APPLICATION NOTES
RESPONSE TIME
circuit layout, minimum lead lengths and placing the
suppressor device as close as possible to the equipment or
components to be protected will minimize this overshoot.
In most applications, the transient suppressor device is
placed in parallel with the equipment or component to be
protected. In this situation, there is a time delay associated
with the capacitance of the device and an overshoot
condition associated with the inductance of the device and
the inductance of the connection method. The capacitance
effect is of minor importance in the parallel protection
scheme because it only produces a time delay in the
transition from the operating voltage to the clamp voltage as
shown in Figure 7.
The inductive effects in the device are due to actual
turn-on time (time required for the device to go from zero
current to full current) and lead inductance. This inductive
effect produces an overshoot in the voltage across the
equipment or component being protected as shown in
Figure 8. Minimizing this overshoot is very important in the
application, since the main purpose for adding a transient
suppressor is to clamp voltage spikes. These devices have
excellent response time, typically in the picosecond range
and negligible inductance. However, external inductive
effects could produce unacceptable overshoot. Proper
Some input impedance represented by Z is essential to
in
prevent overstress of the protection device. This impedance
should be as high as possible, without restricting the circuit
operation.
DUTY CYCLE DERATING
The data of Figure 1 applies for non-repetitive conditions
and at a lead temperature of 25°C. If the duty cycle increases,
the peak power must be reduced as indicated by the curves
of Figure 6. Average power must be derated as the lead or
ambient temperature rises above 25°C. The average power
derating curve normally given on data sheets may be
normalized and used for this purpose.
At first glance the derating curves of Figure 6 appear to be
in error as the 10 ms pulse has a higher derating factor than
the 10 μs pulse. However, when the derating factor for a
given pulse of Figure 6 is multiplied by the peak power value
of Figure 1 for the same pulse, the results follow the
expected trend.
http://onsemi.com
5
1.5KE6.8CA Series
TYPICAL PROTECTION CIRCUIT
Z
in
LOAD
V
in
V
L
V
in
(TRANSIENT)
OVERSHOOT DUE TO
INDUCTIVE EFFECTS
V
V
V
in
(TRANSIENT)
V
L
V
L
V
in
t
d
t
D
= TIME DELAY DUE TO CAPACITIVE EFFECT
t
t
Figure 7.
Figure 8.
UL RECOGNITION*
The entire series has Underwriters Laboratory
Recognition for the classification of protectors (QVGV2)
under the UL standard for safety 497B and File #116110.
Many competitors only have one or two devices recognized
or have recognition in a non-protective category. Some
competitors have no recognition at all. With the UL497B
recognition, our parts successfully passed several tests
including Strike Voltage Breakdown test, Endurance
Conditioning, Temperature test, Dielectric Voltage-
Withstand test, Discharge test and several more.
Whereas, some competitors have only passed a
flammability test for the package material, we have been
recognized for much more to be included in their Protector
category.
*Applies to 1.5KE6.8CA − 1.5KE250CA
CLIPPER BIDIRECTIONAL DEVICES
1. Clipper-bidirectional devices are available in the
1.5KEXXA series and are designated with a “CA”
suffix; for example, 1.5KE18CA. Contact your nearest
ON Semiconductor representative.
3. The 1N6267A through 1N6303A series are JEDEC
registered devices and the registration does not include
a “CA” suffix. To order clipper-bidirectional devices
one must add CA to the 1.5KE device title.
2. Clipper-bidirectional part numbers are tested in both
directions to electrical parameters in preceeding table
(except for V which does not apply).
F
http://onsemi.com
6
1.5KE6.8CA Series
OUTLINE DIMENSIONS
Transient Voltage Suppressors − Axial Leaded
1500 Watt Mosorb
ꢁ
MOSORB
CASE 41A−04
ISSUE D
B
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
D
2. CONTROLLING DIMENSION: INCH.
3. LEAD FINISH AND DIAMETER UNCONTROLLED
IN DIMENSION P.
4. 041A−01 THRU 041A−03 OBSOLETE, NEW
STANDARD 041A−04.
K
A
INCHES
DIM MIN MAX
MILLIMETERS
P
MIN
8.50
4.80
0.96
25.40
−−−
MAX
9.50
5.30
1.06
−−−
A
B
D
K
P
0.335
0.189
0.038
1.000
−−−
0.374
0.209
0.042
−−−
P
0.050
1.27
K
Mosorb is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
1.5KE6.8CA/D
相关型号：
1.5KE16CE3/1
Trans Voltage Suppressor Diode, 1500W, 12.9V V(RWM), Bidirectional, 1 Element, Silicon,
VISHAY
1.5KE16CE3/100
Trans Voltage Suppressor Diode, 1500W, 12.9V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY
1.5KE16CE3/4
Trans Voltage Suppressor Diode, 1500W, 12.9V V(RWM), Bidirectional, 1 Element, Silicon,
VISHAY
1.5KE16CE3/4G
Trans Voltage Suppressor Diode, 1500W, 12.9V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY
1.5KE16CE3/51
Trans Voltage Suppressor Diode, 1500W, 12.9V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY
1.5KE16CE3/70
Trans Voltage Suppressor Diode, 1500W, 12.9V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY
1.5KE16CE3/71
Trans Voltage Suppressor Diode, 1500W, 12.9V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY
1.5KE16CE3/72
Trans Voltage Suppressor Diode, 1500W, 12.9V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY
1.5KE16CE3/73
Trans Voltage Suppressor Diode, 1500W, 12.9V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY
1.5KE16CE3/93
Trans Voltage Suppressor Diode, 1500W, 12.9V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY
1.5KE16CE3TR
Trans Voltage Suppressor Diode, 1500W, 12.9V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC, CASE 1, 2 PIN
MICROSEMI
©2020 ICPDF网 联系我们和版权申明