1MC04-025-15 [RMT]
Blank ceramics (not metallized) Metallized (Au plating) Blank, tinned Copper; 空白陶瓷(没有金属)金属化(镀金)空白,镀锡铜型号: | 1MC04-025-15 |
厂家: | RMT Ltd. |
描述: | Blank ceramics (not metallized) Metallized (Au plating) Blank, tinned Copper |
文件: | 总9页 (文件大小:3290K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Thermoelectric Cooling Solutions
Performance Parameters
1MC04-025-XX
ΔTmax Qmax
Imax
A
Umax AC R
H
Type
K
W
V
Ohm mm
1MC04-025-xx (N=25)
1MC04-025-03
1MC04-025-05
1MC04-025-08
1MC04-025-10
1MC04-025-12
1MC04-025-15
70
72
73
73
73
73
4.58
2.86
1.82
1.47
1.23
0.99
2.4
1.5
0.9
0.8
0.6
0.5
0.96
1.58
2.50
3.12
3.74
4.66
0.9
1.1
1.4
1.6
1.8
2.1
3.1
Performance data are given for 300K, vacuum
Dimensions
Manufacturing options
A. TEC Assembly:
C. Ceramics Surface Options:
D. Thermistor (optional)
* 1. Solder SnSb (Tmelt=230°C)
2. Solder AuSn (Tmelt=280°C)
1. Blank ceramics (not metallized)
2. Metallized (Au plating)
Can be mounted to cold side
ceramics edge. Calibration is
available by request.
3. Metallized and pre-tinned with:
3.1 Solder 117 (In-Sn, Tmelt =117°C)
3.2 Solder 138 (Sn-Bi, Tmelt = 138°C)
3.3 Solder 143 (In-Ag, Tmelt = 143°C)
B. Ceramics:
E. Terminal contacts
1. Blank, tinned Copper
2. Insulated Wires
* 1.Pure Al2O3(100%)
2.Alumina (Al2O3- 96%)
3.Aluminum Nitride (AlN)
* - used by default
3.4 Solder 157 (In, Tmelt = 157°C)
3.5 Solder 183 (Pb-Sn, Tmelt =183°C)
3.6 Optional (specified by Customer)
3. Insulated, color coded
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 1 of 9
Thermoelectric Cooling Solutions
1MC04-025-03
Performance Data
ΔTmax Qmax
Imax
A
Umax
V
ΔTmax Qmax
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
K
W
K
W
1MC04-025-03
70
4.58
2.4
3.1
1MC04-025-03
74
5.00
2.4
3.5
Note: Performance data is specified for optimal optimal conditions (TEC hot side is stabilized at ambient temperature).
Heatsink thermal resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
1MC04-025-05
Performance Data
ΔTmax Qmax
Imax
A
Umax
V
ΔTmax Qmax
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
K
W
K
W
1MC04-025-05
72
2.86
1.5
3.1
1MC04-025-05
75
3.12
1.5
3.5
Note: Performance data is specified at optimal optimal conditions (TEC hot side is stabilized at ambient temperature). Any
heatsink thermal resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 2 of 9
Thermoelectric Cooling Solutions
1MC04-025-08
Performance Data
ΔTmax Qmax
Imax
A
Umax
V
ΔTmax Qmax
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
K
W
K
W
1MC04-025-08
73
1.82
0.9
3.1
1MC04-025-08
75
2.00
1.0
3.5
Note: Performance data is specified for optimal optimal conditions (TEC hot side is stabilized at ambient temperature).
Heatsink thermal resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
1MC04-025-10
Performance Data
ΔTmax Qmax
Imax
A
Umax
V
ΔTmax Qmax
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
K
W
K
W
1MC04-025-10
73
1.47
0.8
3.1
1MC04-025-10
75
1.61
0.8
3.5
Note: Performance data is specified for optimal optimal conditions (TEC hot side is stabilized at ambient temperature).
Heatsink thermal resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 3 of 9
Thermoelectric Cooling Solutions
1MC04-025-12
Performance Data
ΔTmax Qmax
Imax
A
Umax
V
ΔTmax Qmax
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
K
W
K
W
1MC04-025-12
73
1.23
0.6
3.1
1MC04-025-12
75
1.35
0.6
3.5
Note: Performance data is specified for optimal optimal conditions (TEC hot side is stabilized at ambient temperature).
Heatsink thermal resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
1MC04-025-15
Performance Data
ΔTmax Qmax
Imax
A
Umax
V
ΔTmax Qmax
Imax
A
Umax
V
@ 27ºC, Vacuum
@50ºC, N2
K
W
K
W
1MC04-025-15
73
0.99
0.5
3.1
1MC04-025-15
74
1.09
0.5
3.5
Note: Performance data is specified for optimal optimal conditions (TEC hot side is stabilized at ambient temperature).
Heatsink thermal resistance is not included into estimations. Use TECCad Software for estimations under different conditions.
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 4 of 9
Thermoelectric Cooling Solutions
Important notes
1. TEC Performance in this datasheet is specified in two standard ambient condition modes (vacuum, +27ºC and dry
nitrogen (N2), +50ºC). The performance may differ under other conditions. Please, use TECCad software from
RMT Ltd web site or contact RMT or its branch specialists directly for additional TEC performance info.
2. TEC ACR and Umax values are sensitive to ambient temperature. These values can be different from those
specified in the datasheet at other ambient conditions. ACR and Umax raise with ambient temperature increasing.
3. TEC cooling capacity (Qmax) raises with ambient temperature. Please, use TECCad software for additional info or
contact RMT specialists directly.
4. Thermoelectric coolers have the best performance in the temperature range from near room up to +80..90ºC. The
performance is lower at temperatures below 0ºC. TEC is not suitable to work at cryogenic temperatures.
5. Driving a TEC at Imax or Umax doesn’t mean max performance mode. The real optimal mode may depend on
operating conditions and heatload. In fact a better performance can be reached at operating current and voltage
lower than Imax and Umax values specified in the datasheet.
6. It is strongly recommended to avoid a direct mounting of thermoelectric cooler to pure Copper, Aluminum or Nickel
materials as well as a mounting of objects from these materials on TEC cold side. Any material with high CTE may
affect TEC lifetime and/or damage it in case of improper mounting, thermal shock or temperature cycling. In case
of above mentioned materials necessity, it is recommended to use soft solders or glues with large modulus of
elasticity (Indium-based solders or silicon-based thermoconductive glues).
7. RMT Ltd confirms that all thermoelectric coolers meet the requirements of Telcordia GR-468 standard. The up-to-
date Reliability Report is available by request. RMT Ltd warranties thermoelectric coolers lifetime no less than
250K-300K operating hours under normal application conditions.
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 5 of 9
Thermoelectric Cooling Solutions
Additional Options
TEC Polarity
TEC Polarity can be modified by request. The
specified polarity in this datasheet is typical.
It can be reversed in accordance to Customer
application requirements.
+
-
-
+
Standard polarity
Reversed polarity
Terminal Wires Options
The standard solution is based on WB pads.
Terminal Wires can be attached by request.
Various options for terminal wires are available.
(blank, isolated wires, isolated color-coded wires,
flexible multicore wires and etc).
Standard solution,
WB pads
Wired solution,
available by request
Optimization for WB process
The solution with WB pads (no posts) is provided
by default. WB posts are available by request. The
dimensions of WB posts can be modified and
optimized for Customers application. WB posts
are made of Copper, Au plated.
WB pads
WB posts
Customized Au Patterns
Customized Au patterns on thermoelectric cooler
cold side are available by request. Selective Pre-
tinning over pattern is also available. Please,
contact RMT Ltd for additional information about
customized Au patterns requirements.
Customized Au pattern
on cold side
Selective pre-tinning
over pattern
TEC Height modification
Standard TEC height can be modified without
performance changes by using ceramics of
different thickness. Standard thermoelectric cooler
height (specified in this datasheet) can be
increased in a range +0.25..+1.5 mm by request.
Standard height
Modified height,
another ceramics
thickness
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 6 of 9
Thermoelectric Cooling Solutions
Thermoelectric Cooler Overview
Cold side Ceramics
(top side)
Al2O3 Ceramics by default
(AlN solution is available by
request)
TE Cooler Lead Free
Internal Assembly
(Lead-Free Solder 230,
Sn-Sb)
Pellets (BiTe posts)
+
TEC Polarity
(can be modified by
request)
Hot Side Ceramics
(bottom side)
-
WB pads
Application Tips
1. Never heat TE module more than 200˚C (TEC
assembled at 230˚C).
1. Connect TE module to DC power supply according
to polarity.
2. Never use TE module without an attached heat sink
at hot (bottom) side.
2. Do not apply DC current higher than Imax.
Installation
1. Mechanical Mounting. TEC is placed between two heat exchangers . This construction is fixed by screws or in
another mechanical way. It is suitable for large modules (with dimensions 30x30mm and larger). Miniature types
require other assembling methods in most cases.
1. Soldering. This method is suitable for a TE module with metallized outside surfaces. RMT provides this option
and also makes pre-tinning for TE modules.
2. Glueing. It is an up-to-date method that is used by many customers due to availability of glues with good
thermoconductive properties. A glue is usually based on some epoxy compound filled with some
thermoconductive material such as graphite or diamond powders, silver, SiN and others. The application of a
specific type depends on application features and the type of a TE module.
Object being cooled
Object being cooled
TEC
TEC
3
1
2
Screw mounting
Heatsink
Soldering
Heatsink
Gluing
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 7 of 9
Thermoelectric Cooling Solutions
Contacts
RMT Ltd. Headquarters
Warshavskoe sh. 46, 115230, Moscow
Russia
Phone: +7-499-678-2082
Fax: +7-499-678-2083
Web: www.rmtltd.ru
Email: info@rmtltd.ru
EUROPE/USA - TEC Microsystems GmbH
Schwarzschildstrasse 3, 12489 Berlin
Germany
Tel. +49 30 6789 3314
Fax+49 30 6789 3315
Web: www.tec-microsystems.com
Email: info@tec-microsystems.com
CHINA - ProTEC Ltd.
深
圳 良 路恒裕 中 心B座207
市南山区登
ꢀꢁ: +86-755-61596066
ꢂ真: +86-755-61596036
ꢃꢄ: 518054
Web: www.protecltd.com
Email: info@protecltd.com
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 8 of 9
Thermoelectric Cooling Solutions
Legal Notice
All logos, images, trademarks and product names (collectively Materials) are proprietary to RMT Ltd and/ or any
of its affiliates, or subsidiaries, or other respective owners that have granted RMT Ltd the permission and/or
license to use such Materials. All images are provided by RMT Ltd. and are subjects of copyright protection.
RMT Ltd, TEC Microsystems GmbH and ProTEC Ltd do not grant a copyright license (express or implied) to the
Recipient, except that Recipient may reproduce the logos, images and text materials in this press-release
without any alteration for non-promotional or editorial purposes only with a written note about materials owner.
Copyright protection warning
Graphic materials and text from this datasheet may not be used commercially without a prior response in
writing on company letterhead and signed by RMT Ltd authority. Thank you for respecting the intellectual
property rights protected by the International Copyright laws.
Warning: All datasheet images contain RMT Ltd hidden watermark for the immediate proof of their origin.
RMT Image
Hidden Watermark
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 9 of 9
相关型号:
©2020 ICPDF网 联系我们和版权申明