R5104V003A-E2-F [RICOH]

Power Supply Management Circuit, Fixed, 1 Channel, CMOS, PDSO10, 3.10 X 6.40 MM, 0.50 MM PITCH, LEAD FREE, SSOP-10;
R5104V003A-E2-F
型号: R5104V003A-E2-F
厂家: RICOH ELECTRONICS DEVICES DIVISION    RICOH ELECTRONICS DEVICES DIVISION
描述:

Power Supply Management Circuit, Fixed, 1 Channel, CMOS, PDSO10, 3.10 X 6.40 MM, 0.50 MM PITCH, LEAD FREE, SSOP-10

光电二极管
文件: 总2页 (文件大小:173K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
R5104V Series  
Watchdog Timer with VD and VR  
The R5104V Series are CMOS-based system power ICs with a voltage regulator, voltage detector, and watchdog timer integrated in a single chip.  
The R5104V 's input voltage of Max. 36V (absolute maximum rating: Max. 50V) makes it suitable for use in car applications. The voltage regulator  
with an external output transistor is capable of outputting approximately 1A, using the PNP transistor of hFE=100 to 300. R5104V monitors the power  
system of devices equipped with microprocessors and prevents system runaway with a reset signal when a malfunction occurs.  
FEATURES  
Supply Current (ISS) ························Typ. 60μA (IOUT=0mA)  
Operating Voltage Range (VDD) ······Max. 36V  
(VR Section)  
Detector Threshold Accuracy ·······± 2%  
···Typ. ± 50ppm/°C  
TPeomwpe.r-coonefrfe. osef Dt teimteectocar nThbreesshpoeldcified with an external capacitor  
Output Voltage Range (VOUT)··········3.3V to 5.0V (internally fixed)  
Output Voltage Accuracy ················± 2%  
Temp. coeff. of Output Voltage ·······Typ. ± 50ppm/°C  
Output Current (IOUT)·······················1A∗∗  
Fold-back Protection Circuit ···········Current limit Typ. 0.5mA  
(Base current limit of PNP Tr.)  
(WDT Section)  
Watchdog Timeout Period (tWD)······Can be set with an external capacitor.  
(Typ. 300ms at CTW=0.1μF)  
····-100ms, +210ms (CTW=0.1μF)  
WThaetcwhdaotgchTdimoegotuimt PeerrcioadnAbcecusratocpyped by the CE pin. (A Version),  
(VD Section)  
TPhaeckdaegveic·e···c··a··n···b··e···p··u··t··i·n··t·o···s··t·a··n··d··b··y·SmSoOdeP-(1B0Version)  
Detector Threshold Range (-VDET)  
·······2.8V to 4.0V (internally fixed)  
) For information about combination of set output voltage period, please check our website.  
) The value depends on an external transistor.  
∗∗  
BLOCK DIAGRAMS  
TYPICAL APPLICATION  
R5104VxxxA  
(Watchdog timer OFF type)  
R5104VxxxB  
(Standby type)  
Microprocessor  
RESET  
VIN  
9
CE  
RESET  
5
1
2
4
3
6
CE  
9
CE  
9
5
VDD  
ISENSE  
EXT  
R
Level Shift  
WDT  
SCK  
6
2
Level Shift  
WDT  
SCK  
6
2
RESET  
5
RESET  
I
SENSE  
Current Limit  
Current Limit  
ISENSE  
C
TW  
7
8
CTW  
CD  
7
C
TW  
7
1
EXT  
4
3
EXT  
4
3
VDD  
1
V
DD  
VOUT  
SCK  
VDD  
VOUT  
V
OUT  
COUT  
Vref  
Vref  
CIN CTW CD  
10  
GND  
DOUT  
Vref  
Vref  
C
D
8
CD  
8
GND  
10  
GND  
10  
C
C
C
D
: Capacitor for setting the output delay time for the  
voltage detector (10pF or more)  
TW : Capacitor for setting the watchdog timeout period  
and reset hold time (100pF or more)  
OUT :10μF or more  
R : Resistor for limiting the regulator output current. The  
SENSE pin monitors the voltage drop that occurs in R and  
triggers the current limiter when Typ. 0.3V is exceeded.  
I
SELECTION GUIDE  
.
xxx : Specify combination of the output voltage and detector threshold  
using serial numbers.  
Package  
SSOP-10  
Quantity per Reel  
2,000 pcs  
Part No.  
R5104V  
.
xxx-E2-F  
: Select the operation of the CE pin from (  
.
.
) watchdog timer OFF or  
.
A
(.  
B
.
) standby.  
PACKAGE (Top View)  
TYPICAL CHARACTERISTIC  
Watchdog Timeout Period, Watchdog Timeout Reset Time  
vs. Capacitance of CTW Pin  
SSOP-10  
10  
9 8 7 6  
10000  
1000  
tWD  
100  
10  
1
1
2 3 4 5  
t
WR  
1
2
3
4
5
VDD  
6
7
8
9
SCK  
CTW  
CD  
ISENSE  
VOUT  
EXT  
CE  
0.1  
0.001  
0.01  
0.1  
1
10 GND  
RESET  
Capacitance of CTW Pin CTW (µF)  
APPLICATION  
Monitoring of the power system of devices equipped with microprocessors  
No.EK-141-091101  
CMOS Microprocessor Supervisory  
1.The products and the product specifications described in this document are subject to change or  
discontinuation of production without notice for reasons such as improvement. Therefore, before  
deciding to use the products, please refer to Ricoh sales representatives for the latest  
information thereon.  
2.The materials in this document may not be copied or otherwise reproduced in whole or in part  
without prior written consent of Ricoh.  
3.Please be sure to take any necessary formalities under relevant laws or regulations before  
exporting or otherwise taking out of your country the products or the technical information  
described herein.  
4.The technical information described in this document shows typical characteristics of and  
example application circuits for the products. The release of such information is not to be  
construed as a warranty of or a grant of license under Ricoh's or any third party's intellectual  
property rights or any other rights.  
5.The products listed in this document are intended and designed for use as general electronic  
components in standard applications (office equipment, telecommunication equipment,  
measuring instruments, consumer electronic products, amusement equipment etc.). Those  
customers intending to use a product in an application requiring extreme quality and reliability,  
for example, in a highly specific application where the failure or misoperation of the product  
could result in human injury or death (aircraft, spacevehicle, nuclear reactor control system,  
traffic control system, automotive and transportation equipment, combustion equipment, safety  
devices, life support system etc.) should first contact us.  
6.We are making our continuous effort to improve the quality and reliability of our products, but  
semiconductor products are likely to fail with certain probability. In order to prevent any injury to  
persons or damages to property resulting from such failure, customers should be careful enough  
to incorporate safety measures in their design, such as redundancy feature, firecontainment  
feature and fail-safe feature. We do not assume any liability or responsibility for any loss or  
damage arising from misuse or inappropriate use of the products.  
7.Anti-radiation design is not implemented in the products described in this document.  
8.Please contact Ricoh sales representatives should you have any questions or comments  
concerning the products or the technical information.  
RICOH COMPANY., LTD. Electronic Devices Company  
Ricoh awarded ISO 14001 certification.  
Ricoh presented with the Japan Management Quality Award for 1999.  
The Ricoh Group was awarded ISO 14001 certification, which is an international standard for  
environmental management systems, at both its domestic and overseas production facilities.  
Our current aim is to obtain ISO 14001 certification for all of our business offices.  
Ricoh continually strives to promote customer satisfaction, and shares the achievements  
of its management quality improvement program with people and society.  
Ricoh completed the organization of the Lead-free production for all of our products.  
After Apr. 1, 2006, we will ship out the lead free products only. Thus, all products that  
will be shipped from now on comply with RoHS Directive.  
http://www.ricoh.com/LSI/  
RICOH COMPANY, LTD.  
Electronic Devices Company  
● Shin-Yokohama office (International Sales)  
3-2-3, Shin-Yokohama, Kohoku-ku, Yokohama City, Kanagawa 222-8530, Japan  
Phone: +81-45-477-1697 Fax: +81-45-477-1698  
RICOH EUROPE (NETHERLANDS) B.V.  
● Semiconductor Support Centre  
Prof. W.H.Keesomlaan 1, 1183 DL Amstelveen, The Netherlands  
P.O.Box 114, 1180 AC Amstelveen  
Phone: +31-20-5474-309 Fax: +31-20-5474-791  
RICOH ELECTRONIC DEVICES KOREA Co., Ltd.  
11 floor, Haesung 1 building, 942, Daechidong, Gangnamgu, Seoul, Korea  
Phone: +82-2-2135-5700 Fax: +82-2-2135-5705  
RICOH ELECTRONIC DEVICES SHANGHAI Co., Ltd.  
Room403, No.2 Building, 690#Bi Bo Road, Pu Dong New district, Shanghai 201203,  
People's Republic of China  
Phone: +86-21-5027-3200 Fax: +86-21-5027-3299  
RICOH COMPANY, LTD.  
Electronic Devices Company  
● Taipei office  
Room109, 10F-1, No.51, Hengyang Rd., Taipei City, Taiwan (R.O.C.)  
Phone: +886-2-2313-1621/1622 Fax: +886-2-2313-1623  

相关型号:

R5104V003A-E2-KG

Power Supply Management Circuit, Fixed, 1 Channel, CMOS, PDSO10, HALOGEN FREE AND LEAD FREE, SSOP-10
RICOH

R5104V003B

Microprocessor power management with Watchdog Timer
RICOH

R5104V003B-E2-F

Power Supply Management Circuit, Fixed, 1 Channel, CMOS, PDSO10, 3.10 X 6.40 MM, 0.50 MM PITCH, LEAD FREE, SSOP-10
RICOH

R5104V003B-E2-KG

Power Supply Management Circuit, Fixed, 1 Channel, CMOS, PDSO10, HALOGEN FREE AND LEAD FREE, SSOP-10
RICOH

R5104V004A

Microprocessor power management with Watchdog Timer
RICOH

R5104V004A-E2-F

Power Supply Management Circuit, Fixed, 1 Channel, CMOS, PDSO10, 3.10 X 6.40 MM, 0.50 MM PITCH, LEAD FREE, SSOP-10
RICOH

R5104V004B

Microprocessor power management with Watchdog Timer
RICOH

R5104V006B-E2-F

Power Supply Management Circuit, Fixed, 1 Channel, CMOS, PDSO10, 3.10 X 6.40 MM, 0.50 MM PITCH, LEAD FREE, SSOP-10
RICOH

R5104V007A

Microprocessor power management with Watchdog Timer
RICOH

R5104V007A-E2-F

Power Supply Management Circuit, Fixed, 1 Channel, CMOS, PDSO10, 3.10 X 6.40 MM, 0.50 MM PITCH, LEAD FREE, SSOP-10
RICOH

R5104V007B

Microprocessor power management with Watchdog Timer
RICOH

R5104V007B-E2-F

Power Supply Management Circuit, Fixed, 1 Channel, CMOS, PDSO10, 3.10 X 6.40 MM, 0.50 MM PITCH, LEAD FREE, SSOP-10
RICOH