R1163N421D-TR-F [RICOH]
Fixed Positive LDO Regulator, PDSO5, LEAD FREE, SOT-23, 5 PIN;
| 型号： | R1163N421D-TR-F |
| 厂家： | 
RICOH ELECTRONICS DEVICES DIVISION |
| 描述： | Fixed Positive LDO Regulator, PDSO5, LEAD FREE, SOT-23, 5 PIN 光电二极管 |
| 文件： | 总29页 (文件大小：679K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
R1163x SERIES
3-MODE 150mA LDO REGULATOR with the Reverse Current Protection
NO.EA-118-081118
OUTLINE
The R1163x Series consist of CMOS-based voltage regulator ICs with high output voltage accuracy and low
supply current. These ICs perform with the chip enable function and realize a standby mode with ultra low supply
current. To prevent the destruction by over current, the current limit circuit is included. The R1163x Series have
3-mode. One is standby mode with CE or standby control pin. Other two modes are realized with ECO pin. Fast
Transient Mode (FT mode) and Low Power Mode (LP mode) are alternative with ECO pin. Consumption current
is reduced at Low Power Mode compared with Fast Transient Mode. The output voltage is maintained between
FT mode and LP mode.
Further, the reverse current protection circuit is built-in. Therefore, if a higher voltage than VDD pin is forced to
the output pin, the reverse current to VDD pin is very small (Max. 0.1μA) , so it is suitable for backup circuit.
Since the packages for these ICs are SOT-23-5, SON-6, and DFN(PLP)1616-6 packages, high density
mounting of the ICs on boards is possible.
FEATURES
• Supply Current..................................................... Typ. 6.0μA (Low Power Mode),
Typ. 70μA (Fast Transient Mode)
• Standby Mode...................................................... Typ. 0.6μA
• Reverse Current................................................... Max. 0.1μA
• Input Voltage Range ............................................ 2.0V to 6.0V
• Output Voltage ..................................................... Stepwise setting with a step of 0.1V
in the range of 1.5V to 5.0V is possible
• Output Voltage Accuracy...................................... ±1.5% (±2.5% at Low Power Mode)
• Temperature-Drift Coefficient of Output Voltage.. Typ. ±100ppm/°C
• Dropout Voltage ................................................... Typ. 0.25V (IOUT=150mA, VOUT=2.8V)
• Ripple Rejection................................................... Typ. 70dB (f=1kHz, Fast Transient Mode)
• Line Regulation.................................................... Typ. 0.02%/V (Fast Transient Mode)
• Package ............................................................. DFN(PLP)1616-6, SON-6, SOT-23-5
• Built-in fold-back protection circuit....................... Typ. 40mA (Current at short mode)
• Performs with Ceramic Capacitors ...................... CIN=Ceramic 1.0μF, COUT=Ceramic 0.47μF
APPLICATIONS
• Precision Voltage References.
• Power source for electrical appliances such as cameras, VCRs and hand-held communication equipment.
• Power source for battery-powered equipment.
1
R1163x
BLOCK DIAGRAM
R1163xxx1B
R1163xxx1D
ECO
ECO
DD
V
DD
V
OUT
V
OUT
V
Vref
Vref
Current Limit
Current Limit
Reverse
Detector
Reverse Detector
CE
CE
GND
GND
R1163xxx1E
ECO
DD
V
OUT
V
Vref
Current Limit
Reverse Detector
CE
GND
2
R1163x
SELECTION GUIDE
The output voltage, the auto-discharge function*, the package and the taping type for the ICs can be selected
at the user's request. The selection can be available by designating the part number as shown below;
R1163xxx1x-xx-x ←Part Number
↑ ↑ ↑ ↑
a b c d
↑
e
Code
Contents
Designation of Package Type :
N: SOT-23-5
D: SON-6
a
K: DFN(PLP)1616-6
Setting Output Voltage (VOUT) :
Stepwise setting with a step of 0.1V in the range of 1.5V to 5.0V is possible.
Exceptions: 1.85V=R1163x181x5-xx-x, 2.75V=R1163x271x5-xx-x,
2.85V=R1163x281x5-xx-x
b
c
Designation of Chip Enable Option :
B: "H" active type and without the auto-discharge function*.
D: "H" active and with the auto-discharge function*.
E: "H" active type and without auto-discharge function*.
ECO logic reverse type (Low Power mode at ECO="H")
Designation of Taping Type :
Refer to Taping Specifications;TR type is the standard direction.
d
e
Designation of composition of pin plating:
-F : Lead free solder plating (SOT-23-5, SON-6)
None: Au plating (DFN(PLP)1616-6)
*) When the mode is into standby with CE signal, auto discharge transistor turns on, and it makes the turn-off
speed faster than normal type.
3
R1163x
PIN CONFIGURATIONS
• SOT-23-5
• SON-6
• DFN(PLP)1616-6
Top View
Bottom View
Top View
Bottom View
5
4
6
5
4
4
5
6
5
5
6
4
4
6
∗
∗
*
(mark side)
1
2
3
3
2
1
3
1
2
3
3
1
2
1
2
PIN DISCRIPTIONS
• SOT-23-5
• SON-6
Pin No
Symbol
VDD
Pin Description
Input Pin
Pin No
Symbol
VDD
Pin Description
Input Pin
1
2
3
4
5
1
2
3
4
5
6
GND
CE
Ground Pin
NC
No Connection
Output pin
Chip Enable Pin
VOUT
MODE alternative pin
Output pin
MODE alternative pin
Ground Pin
ECO
ECO/
ECO
ECO/
VOUT
GND
CE
Chip Enable Pin
*) Tab in the
parts have GND level.
(They are connected to the back side of this IC.)
Do not connect to other wires or land patterns.
• DFN(PLP)1616-6
Pin No
Symbol
Pin Description
Output pin
1
2
3
4
5
6
VOUT
GND
Ground Pin
MODE alternative pin
Chip Enable pin
No Connection
Input Pin
ECO
ECO/
CE
NC
VDD
*) Tab in the
parts have GND level.
(They are connected to the back side of this IC.)
Do not connect to other wires or land patterns.
4
R1163x
ABSOLUTE MAXIMUM RATINGS
Symbol
Item
Rating
6.5
Unit
V
VIN
Input Voltage
VECO
VCE
V
ECO
−0.3 ~ 6.5
−0.3 ~ 6.5
−0.3 ~ 6.5
180
Input Voltage (ECO/
Pin)
Input Voltage (CE Pin)
Output Voltage
V
VOUT
IOUT
V
Output Current
mA
Power Dissipation (SOT-23-5) *
Power Dissipation (SON-6) *
420
PD
mW
500
Power Dissipation (DFN(PLP)1616-6)*
Operating Temperature Range
Storage Temperature Range
560
Topt
Tstg
−40 ~ 85
−55 ~ 125
°C
°C
*) For Power Dissipation, please refer to PACKAGE INFORMATION to be described.
ABSOLUTE MAXIMUM RATINGS
Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the
permanent damages and may degrade the life time and safety for both device and system using the device
in the field.
The functional operation at or over these absolute maximum ratings is not assured.
RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS)
All of electronic equipment should be designed that the mounted semiconductor devices operate within the
recommended operating conditions. The semiconductor devices cannot operate normally over the
recommended operating conditions, even if when they are used over such conditions by momentary
electronic noise or surge. And the semiconductor devices may receive serious damage when they continue
to operate over the recommended operating conditions.
5
R1163x
ELECTRICAL CHARACTERISTICS
R1163xxx1B/D
Topt=25°C
Symbol
Item
Conditions
Min.
Typ.
Max.
Unit
VIN=Set VOUT+1V, VECO=VIN
FT Mode
LP Mode
×0.985
×1.015
×1.025
1mA
IOUT
30mA
=
=
VOUT
Output Voltage
V
VIN=Set VOUT + 1V, VECO=GND
×0.975
1mA
IOUT
30mA
=
=
VOUT > 2.0V
0
0
1.2
24
%
−1.2
−24
150
Output Voltage Deviation
between FT Mode and LP Mode
VIN=Set VOUT+1V,
IOUT=30mA
ΔVOUT
VOUT
2.0V
mV
mA
=
IOUT
Output Current
VIN−VOUT=1.0V
VIN=Set VOUT+1V, VECO=VIN
FT Mode
Load Regulation
20
20
40
45
1mA
IOUT
150mA
=
ΔVOUT/
ΔIOUT
=
mV
VIN=Set VOUT+1V, VECO=GND
LP Mode
1mA
IOUT
150mA
=
=
VDIF
ISS1
Dropout Voltage
Refer to the following table
VIN=Set VOUT+1V
VECO=VIN
VIN=Set VOUT+1V
VECO=GND
Supply Current (FT Mode)
70
100
10.0
1.0
μA
μA
μA
ISS2
Supply Current (LP Mode)
6.0
VIN=Set VOUT+1V, VCE=GND
VECO=GND or VIN
Istandby Supply Current (Standby)
0.6
Set VOUT+0.5V VIN 6.0V
=
=
IOUT=30mA, VECO=VIN
FT Mode
0.02
0.10
0.20
If VOUT 1.6V,
=
then 2.2V VIN 6.0V
ΔVOUT/
ΔVIN
=
=
Line Regulation
%/V
Set VOUT + 0.5V VIN 6.0V
=
=
IOUT =30mA, VECO=GND
LP Mode
0.05
If VOUT 1.6V,
=
then 2.2V VIN 6.0V
=
=
Ripple 0.2Vp-p,
VIN=Set VOUT+1V,
70
60
f=1kHz
RR
Ripple Rejection (FT Mode)
Input Voltage
dB
V
IOUT=30mA, VECO=VIN
If VOUT 1.7V, then
=
f=10kHz
VIN=Set VOUT+1.2V
VIN
2.0
6.0
ppm
/°C
ΔVOUT/ Output Voltage
ΔTopt
IOUT=30mA
±100
Temperature Coefficient
−40°C Topt 85°C
=
=
Ilim
Short Current Limit
40
0.3
5
mA
μA
MΩ
V
VOUT=0V
IPD
CE Pull-down Current
0.6
30
RPDE
VCEH
VCEL
ECO Pull-down Resistance
CE, ECO Input Voltage "H"
CE, ECO Input Voltage "L"
Output Noise "H" (FT Mode)
Output Noise "L" (LP Mode)
2
1.0
0
6.0
0.35
V
30
40
BW=10Hz to 100kHz
BW=10Hz to 100kHz
en
μVrms
Low Output Nch Tr.
ON Resistance (of D version)
RLOW
IREV
60
0
VCE=0V
Ω
Reverse Current
VOUT>0.5V, 0V VIN 6V
0.1
μA
=
=
6
R1163x
R1163xxx1E
Symbol
Topt=25°C
Item
Conditions
Min.
Typ.
Max.
Unit
VIN=Set VOUT+1V, VECO=GND
FT Mode
LP Mode
×0.985
×1.015
×1.025
1mA
IOUT
30mA
=
=
VOUT
Output Voltage
V
VIN=Set VOUT +1V, VECO=VIN
×0.975
1mA
IOUT
30mA
=
=
VOUT > 2.0V
0
0
1.2
24
%
−1.2
−24
150
Output Voltage Deviation
between FT Mode and LP Mode
VIN=Set VOUT+1V,
IOUT=30mA
ΔVOUT
VOUT
2.0V
mV
mA
=
IOUT
Output Current
VIN−VOUT=1.0V
VIN=Set VOUT+1V, VECO=GND
FT Mode
Load Regulation
LP Mode
20
20
40
45
1mA
IOUT
150mA
=
ΔVOUT/
ΔIOUT
=
mV
VIN=Set VOUT+1V, VECO=VIN
1mA
IOUT
150mA
=
=
VDIF
ISS1
Dropout Voltage
Refer to the following table
VIN=Set VOUT+1V
VECO=GND
VIN=Set VOUT+1V
VECO=VIN
Supply Current (FT Mode)
70
100
10.0
1.0
μA
μA
μA
ISS2
Supply Current (LP Mode)
6.0
VIN=Set VOUT+1V, VCE=GND
VECO=GND or VIN
Istandby Supply Current (Standby)
0.6
Set VOUT+0.5V VIN 6.0V
=
=
IOUT=30mA, VECO=GND
FT Mode
0.02
0.10
0.20
If VOUT 1.6V,
=
then 2.2V VIN 6.0V
ΔVOUT/
ΔVIN
=
=
Line Regulation
%/V
Set VOUT + 0.5V VIN 6.0V
=
=
IOUT=30mA, VECO=VIN
LP Mode
0.05
If VOUT 1.6V,
=
then 2.2V VIN 6.0V
=
=
Ripple 0.2Vp-p
70
60
f = 1kHz
VIN=Set VOUT+1V,
IOUT=30mA,
RR
Ripple Rejection (FT Mode)
Input Voltage
dB
V
VECO=GND
If VOUT 1.7V, then
=
f = 10kHz
VIN=Set VOUT+1.2V
VIN
2.0
6.0
ppm
/°C
ΔVOUT/ Output Voltage
ΔTopt
IOUT = 30mA
±100
Temperature Coefficient
−40°C Topt 85°C
=
=
Ilim
Short Current Limit
40
mA
μA
V
VOUT = 0V
IPD
CE Pull-down Current
0.3
0.6
6.0
0.4
VCEH
1.0
0
ECO
ECO
CE,
CE,
Input Voltage "H"
Input Voltage "L"
VCEL
V
Output Noise "H" (FT Mode)
Output Noise "L" (LP Mode)
Reverse Current
30
40
0
BW = 10Hz to 100kHz
BW = 10Hz to 100kHz
en
μ
Vrms
IREV
VOUT>0.5V, 0V VIN 6V
0.1
μA
=
=
7
R1163x
ELECTRICAL CHARACTERISTICS by OUTPUT VOLTAGE
Topt=25°C
Dropout Voltage (mV)
Output Voltage
VDIF (ECO=H)
VDIF (ECO=L)
VOUT (V)
Condition
Typ.
Max.
680
550
520
490
425
350
Typ.
420
390
370
350
300
250
Max.
680
550
520
490
430
350
<
1.5 VOUT < 1.6
400
380
350
340
290
250
=
<
1.6 VOUT < 1.7
=
<
1.7 VOUT < 1.8
=
IOUT=150mA
<
1.8 VOUT < 2.0
=
<
2.0 VOUT < 2.8
=
<
<
5.0
=
2.8
VOUT
=
TYPICAL APPLICATION
OUT
V
DD
V
OUT
V
C2
R1163x
Series
C1
ECO
CE
GND
(External Components)
Ex. C1: Ceramic Capacitor 1.0μF
C2: Ceramic Capacitor 0.47μF Murata GRM40B474K
Kyocera CM105B474K
TECHNICAL NOTES
When using these ICs, consider the following points:
Phase Compensation
In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For
this purpose, be sure to use a 0.47μF or more ceramic capacitor C2.
(Test these ICs with as same external components as ones to be used on the PCB.)
When a tantalum capacitor is used with this IC, if the equivalent series resistor (ESR) of the capacitor is large,
output voltage may be unstable.
PCB Layout
Make VDD and GND lines sufficient. If their impedance is high, noise pickup or unstable operation may result.
Connect a capacitor C1 with as much as 1.0μF capacitor between VDD and GND pin as close as possible.
Set external components such as an output capacitor C2, as close as possible to the ICs and make wiring as
short as possible.
8
R1163x
TEST CIRCUITS
VDD
VOUT
VOUT
C2
IOUT
V
R1163x
Series
GND
C1
CE
ECO
C1=Ceramic 1.0μF
C2=Ceramic 0.47μF
Basic Test Circuit
OUT
V
DD
V
OUT
V
SS
I
C2
A
R1163x
Series
C1
GND
ECO
CE
C1=Ceramic 1.0μF
C2=Ceramic 0.47μF
Test Circuit for Supply Current
VDD
VOUT
C2
IOUT
Pulse
Generator
R1163x
Series
GND
P.G.
ECO
CE
C1=Ceramic 1.0μF
C2=Ceramic 0.47μF
Test Circuit for Ripple Rejection, Line Transient Response
9
R1163x
VDD
VOUT
VOUT
C2
R1163x
Series
GND
C1
IOUT a IOUT b
V
ECO
CE
C1=Ceramic 1.0μF
C2=Ceramic 0.47μF
Test Circuit for Load Transient Response
VDD
VOUT
C2
IOUT
R1163x
Series
GND
C1
Pulse
Generator
ECO
CE
P.G.
C1=Ceramic 1.0μF
C2=Ceramic 0.47μF
Test Circuit for Output Voltage at Mode alternative point
VDD
VOUT
C2
IOUT
C1
R1163x
Series
GND
ECO
CE
∗ CE pin Input Waveform
Set VOUT+1.0V
P.G.
0V
Pulse
Generator
C1=Ceramic 1.0μF
C2=Ceramic 0.47μF
Test Circuit for Turn On Speed with CE pin
10
R1163x
TYPICAL CHARACTERISTICS
Unless otherwise provided, capacitors are ceramic type.
1) Output Voltage vs. Output Current
R1163x151x ECO=H
R1163x151x ECO=L
1.6
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
1.4
V
IN=2V
V
IN=2V
1.2
1.0
0.8
0.6
0.4
0.2
0.0
•
•
V
IN=2.5V 3.5V
V
IN=2.5V 3.5V
0
0
0
100
200
300
400
400
400
0
0
0
100
200
300
400
400
400
Output Current IOUT(mA)
Output Current IOUT(mA)
R1163x281x ECO=H
R1163x281x ECO=L
3.0
2.5
2.0
1.5
1.0
0.5
0.0
3.0
2.5
2.0
1.5
1.0
0.5
0.0
VIN=3.1V
VIN=3.1V
V
IN=3.3V
IN=3.8V 4.8V
V
IN=3.3V
•
•
V
IN=3.8V 4.8V
V
100
200
300
100
200
300
Output Current IOUT(mA)
Output Current IOUT(mA)
R1163x40x ECO=H
R1163x40x ECO=L
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
V
IN=4.5V
V
IN=4.3V
V
IN=4.3V
•
V
IN=5V 6V
V
IN=4.5V
IN=5V 6V
•
V
100
200
300
100
200
300
Output Current IOUT(mA)
Output Current IOUT(mA)
11
R1163x
2) Output Voltage vs. Input Voltage
R1163x151x ECO=H
R1163x15x ECO=L
1.6
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
IOUT=1mA
IOUT=30mA
IOUT=50mA
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
0
0
0
1
2
3
4
5
6
6
6
0
0
0
1
2
3
4
5
6
6
6
Input Voltage VIN(V)
Input Voltage VIN(V)
R1163x28x ECO=H
R1163x28x ECO=L
3.0
2.5
2.0
1.5
1.0
0.5
0.0
3.0
2.5
2.0
1.5
1.0
0.5
0.0
IOUT=1mA
IOUT=30mA
IOUT=50mA
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
1
2
3
4
5
1
2
3
4
5
Input Voltage VIN(V)
Input Voltage VIN(V)
R1163x40x ECO=H
R1163x40x ECO=L
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
IOUT=1mA
IOUT=30mA
IOUT=50mA
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
1
2
3
4
5
1
2
3
4
5
Input Voltage VIN(V)
Input Voltage VIN(V)
12
R1163x
3) Supply Current vs. Input Voltage
R1163x151x ECO=H
R1163x151x ECO=L
80
8
7
6
5
4
3
2
1
0
70
60
50
40
30
20
10
0
0
0
0
1
2
3
4
5
5
5
6
6
6
0
0
0
1
2
3
4
5
5
5
6
6
6
Input Voltage VIN(V)
Input Voltage VIN(V)
R1163x281x ECO=H
R1163x281x ECO=L
80
70
60
50
40
30
20
10
0
8
7
6
5
4
3
2
1
0
1
2
3
4
1
2
3
4
Input Voltage VIN(V)
Input Voltage VIN(V)
R1163x401x ECO=H
R1163x401x ECO=L
80
70
60
50
40
30
20
10
0
8
7
6
5
4
3
2
1
0
1
2
3
4
1
2
3
4
Input Voltage VIN(V)
Input Voltage VIN(V)
13
R1163x
4) Output Voltage vs. Temperature
R1163x151x ECO=H
R1163x151x ECO=L
1.53
1.53
1.52
1.51
1.50
1.49
1.48
1.47
1.46
1.52
1.51
1.50
1.49
1.48
1.47
1.46
-50 -25
0
25
50
75
75
75
100
100
100
-50 -25
0
25
50
75
75
75
100
100
100
Temperature Topt(°C)
Temperature Topt(°C)
R1163x281x ECO=H
R1163x281x ECO=L
2.83
2.82
2.81
2.80
2.79
2.78
2.77
2.76
2.83
2.82
2.81
2.80
2.79
2.78
2.77
2.76
-50 -25
0
25
50
-50 -25
0
25
50
Temperature Topt(°C)
Temperature Topt(°C)
R1163x401x ECO=H
R1163x401x ECO=L
4.05
4.04
4.03
4.02
4.01
4.00
3.99
3.98
3.97
4.06
4.05
4.04
4.03
4.02
4.01
4.00
3.99
3.98
-50 -25
0
25
50
-50 -25
0
25
50
Temperature Topt(°C)
Temperature Topt(°C)
14
R1163x
5) Supply Current vs. Temperature
R1163x151x ECO=H
R1163x151x ECO=L
V
IN=2.5V
VIN=2.5V
90
80
70
60
50
40
30
20
10
0
10
9
8
7
6
5
4
3
2
1
0
-50 -25
0
25
50
75
100
-50 -25
0
25
50
75
100
Temperature Topt(°C)
Temperature Topt(°C)
R1163x281x ECO=H
R1163x281x ECO=L
V
IN=3.8V
VIN=3.8V
90
80
70
60
50
40
30
20
10
0
10
9
8
7
6
5
4
3
2
1
0
-50 -25
0
25
50
75
100
-50 -25
0
25
50
75
100
Temperature Topt(°C)
Temperature Topt(°C)
R1163x401x ECO=H
R1163x401x ECO=L
V
IN=5.0V
VIN=5.0V
90
80
70
60
50
40
30
20
10
0
10
9
8
7
6
5
4
3
2
1
0
-50 -25
0
25
50
75
100
-50 -25
0
25
50
75
100
Temperature Topt(°C)
Temperature Topt(°C)
15
R1163x
6) Standby Current vs. Input Voltage
2.5
Topt=85°C
Topt=25°C
Topt=-40°C
2.0
1.5
1.0
0.5
0.0
0
1
2
3
4
5
6
Input Voltage VIN(V)
7) Reverse Current vs. Output Voltage
V
IN=1V
VIN=0V
Topt=85°C
Topt=25°C
Topt=-40°C
0.020
0.018
0.016
0.014
0.012
0.010
0.008
0.006
0.004
0.002
0.000
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Topt=85°C
Topt=25°C
Topt=-40°C
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Output Voltage VOUT(V)
Output Voltage VOUT(V)
8) Dropout Voltage vs. Output Current
R1163x151x ECO=H
R1163x151x ECO=L
0.5
0.5
0.4
0.3
0.2
0.1
0.0
Topt=85°C
Topt=25°C
Topt=-40°C
Topt=85°C
Topt=25°C
Topt=-40°C
0.4
0.3
0.2
0.1
0.0
0
25
50
75
100 125 150
0
25
50
75
100 125 150
Output Current IOUT(mA)
Output Current IOUT(mA)
16
R1163x
R1163x161x ECO=H
R1163x161x ECO=L
0.5
0.4
0.3
0.2
0.1
0.0
0.5
0.4
0.3
0.2
0.1
0.0
Topt=85°C
Topt=25°C
Topt=-40°C
Topt=85°C
Topt=25°C
Topt=-40°C
0
0
0
25
50
75
100 125 150
0
0
0
25
50
75
100 125 150
Output Current IOUT(mA)
Output Current IOUT(mA)
R1163x171x ECO=H
R1163x171x ECO=L
0.5
0.4
0.3
0.2
0.1
0.0
0.5
0.4
0.3
0.2
0.1
0.0
Topt=85°C
Topt=25°C
Topt=-40°C
Topt=85°C
Topt=25°C
Topt=-40°C
25
50
75
100 125 150
25
50
75
100 125 150
Output Current IOUT(mA)
Output Current IOUT(mA)
R1163x181x ECO=H
R1163x181x ECO=L
0.5
0.4
0.3
0.2
0.1
0.0
0.5
0.4
0.3
0.2
0.1
0.0
Topt=85°C
Topt=25°C
Topt=-40°C
Topt=85°C
Topt=25°C
Topt=-40°C
25
50
75
100 125 150
25
50
75
100 125 150
Output Current IOUT(mA)
Output Current IOUT(mA)
17
R1163x
R1163x211x ECO=H
R1163x211x ECO=L
0.4
0.4
0.3
0.2
0.1
0.0
Topt=85°C
Topt=25°C
Topt=-40°C
Topt=85°C
Topt=25°C
Topt=-40°C
0.3
0.2
0.1
0.0
0
0
0
25
50
75
100 125 150
0
0
0
25
50
75
100 125 150
Output Current IOUT(mA)
Output Current IOUT(mA)
R1163x281x ECO=H
R1163x281x ECO=L
0.30
0.25
0.20
0.15
0.10
0.05
0.00
0.30
0.25
0.20
0.15
0.10
0.05
0.00
Topt=85°C
Topt=25°C
Topt=-40°C
Topt=85°C
Topt=25°C
Topt=-40°C
25
50
75
100 125 150
25
50
75
100 125 150
Output Current IOUT(mA)
Output Current IOUT(mA)
R1163x401x ECO=H
R1163x401x ECO=L
0.30
0.25
0.20
0.15
0.10
0.05
0.00
0.30
0.25
0.20
0.15
0.10
0.05
0.00
Topt=85°C
Topt=25°C
Topt=-40°C
Topt=85°C
Topt=25°C
Topt=-40°C
25
50
75
100 125 150
25
50
75
100 125 150
Output Current IOUT(mA)
Output Current IOUT(mA)
18
R1163x
9) Dropout Voltage vs. Set Output Voltage
R1163x ECO=H
R1163x ECO=L
0.50
0.50
0.40
0.30
0.20
0.10
0.00
I
I
I
I
I
OUT=10mA
OUT=30mA
OUT=50mA
OUT=100mA
OUT=150mA
IOUT=10mA
IOUT=30mA
IOUT=50mA
IOUT=100mA
IOUT=150mA
0.40
0.30
0.20
0.10
0.00
1.5
2.0
2.5
3.0
3.5
4.0
1.5
2.0
2.5
3.0
3.5
4.0
Set Output Voltage VREG(V)
Set Output Voltage VREG(V)
10) Ripple Rejection vs. Input Bias Voltage
R1163x281x ECO=H
R1163x281x ECO=H
CIN=none, COUT=0.47μF,
IOUT=1mA Ripple=0.2Vp-p
CIN=none, COUT=0.47μF,
IOUT=1mA Ripple=0.5Vp-p
90
90
80
70
60
50
40
30
20
10
0
80
70
60
50
40
30
f=1kHz
20
f=1kHz
f=10kHz
f=100kHz
f=10kHz
f=100kHz
10
0
2.9
3.0
3.1
3.2
3.3
2.9
3.0
3.1
3.2
3.3
Input Voltage VIN(V)
Input Voltage VIN(V)
R1162x281x ECO=H
R1162x281x ECO=H
CIN=none, COUT=0.47μF,
IOUT=30mA Ripple=0.2Vp-p
CIN=none, COUT=0.47μF,
IOUT=30mA Ripple=0.5Vp-p
90
90
80
70
60
50
40
30
20
10
0
80
70
60
50
40
30
20
10
0
f=1kHz
f=10kHz
f=100kHz
f=1kHz
f=10kHz
f=100kHz
2.9
3.0
3.1
3.2
3.3
2.9
3.0
3.1
3.2
3.3
Input Voltage VIN(V)
Input Voltage VIN(V)
19
R1163x
R1163x281x ECO=H
R1163x281x ECO=H
CIN=none, COUT=0.47μF,
IOUT=50mA Ripple=0.2Vp-p
CIN=none, COUT=0.47μF,
IOUT=50mA Ripple=0.5Vp-p
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
f=1kHz
f=10kHz
f=100kHz
f=1kHz
f=10kHz
f=100kHz
2.9
3.0
3.1
3.2
3.3
2.9
3.0
3.1
3.2
3.3
Input Voltage VIN(V)
Input Voltage VIN(V)
11) Ripple Rejection vs. Frequency
R1163x151x ECO=H
R1163x151x ECO=L
CIN=none, COUT=0.47μF,
CIN=none, COUT=0.47μF,
VIN=2.5VDC+0.2Vp-p
VIN=2.5VDC+0.2Vp-p
80
70
60
50
40
30
20
10
0
70
60
50
40
30
20
10
0
IOUT=1mA
IOUT=30mA
IOUT=50mA
IOUT=1mA
IOUT=30mA
IOUT=50mA
0.1
1
10
100
0.1
1
10
100
Frequency f(kHz)
Frequency f(kHz)
R1163x281x ECO=H
R1163x281x ECO=L
CIN=none, COUT=0.47μF,
CIN=none, COUT=0.47μF,
VIN=3.8VDC+0.2Vp-p
VIN=3.8VDC+0.2Vp-p
80
70
60
50
40
30
20
10
0
70
60
50
40
30
20
10
0
IOUT=1mA
IOUT=30mA
IOUT=50mA
IOUT=1mA
IOUT=30mA
IOUT=50mA
0.1
1
10
100
0.1
1
10
100
Frequency f(kHz)
Frequency f(kHz)
20
R1163x
R1163x401x ECO=H
R1163x401x ECO=L
CIN=none, COUT=0.47μF,
CIN=none, COUT=0.47μF,
VIN=5.0VDC+0.2Vp-p
VIN=5.0VDC+0.2Vp-p
80
70
60
50
40
30
20
10
0
70
60
50
40
30
20
10
0
IOUT=1mA
IOUT=30mA
IOUT=50mA
IOUT=1mA
IOUT=30mA
IOUT=50mA
0.1
1
10
100
0.1
1
10
100
Frequency f(kHz)
Frequency f(kHz)
12) Input Transient Response
R1163x151x ECO=H
R1163x151x ECO=L
C
IN=none, COUT=0.47μF IOUT=30mA
C
IN=none, COUT=0.47μF IOUT=10mA
1.58
1.56
1.54
1.52
1.50
1.48
1.46
4
3
3.5
4
3
3.0
2.5
2.0
1.5
1.0
0.5
Input Voltage
Input Voltage
2
2
1
1
0
0
Output Voltage
Output Voltage
-1
-2
-1
-2
0
10 20 30 40 50 60 70 80 90 100
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Time t(μs)
Time t(ms)
R1163x151x ECO=L
R1163x281x ECO=H
C
IN=none, COUT=1μF IOUT=10mA
C
IN=none, COUT=1μF IOUT=30mA
3.5
3.0
2.5
2.0
1.5
1.0
0.5
4
3
2.88
2.86
2.84
2.82
2.80
2.78
2.76
6
5
4
3
2
1
0
Input Voltage
Input Voltage
2
1
0
Output Voltage
Output Voltage
-1
-2
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0
10 20 30 40 50 60 70 80 90 100
Time t(ms)
Time t(μs)
21
R1163x
R1163x281x ECO=H
C
IN=none, COUT=1μF IOUT=10mA
5.0
6
5
4
3
2
1
0
4.5
4.0
3.5
3.0
2.5
2.0
Input Voltage
Output Voltage
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Time t(ms)
13) Load Transient Response
R1163x151x ECO=H
R1163x151x ECO=H
V
IN=2.5V, CIN=1μF COUT=0.47μF
V
IN=2.5V, CIN=1μF COUT=1.0μF
1.9
1.8
1.7
1.6
1.5
1.4
1.3
150
100
50
1.9
1.8
1.7
1.6
1.5
1.4
1.3
150
100
50
Output Current
Output Current
0
0
-50
-100
-150
-50
-100
-150
Output Voltage
Output Voltage
0
2
4
6
8
10 12 14 16 18 20
0
2
4
6
8
10 12 14 16 18 20
Time t(μs)
Time t(μs)
R1163x151x ECO=H
R1163x151x ECO=H
V
IN=2.5V, CIN=1μF COUT=0.47μF
V
IN=2.5V, CIN=1μF COUT=1.0μF
1.9
1.8
1.7
1.6
1.5
1.4
1.3
60
30
1.9
1.8
1.7
1.6
1.5
1.4
1.3
60
30
Output Current
Output Current
0
0
-30
-60
-90
-120
-30
-60
-90
-120
Output Voltage
Output Voltage
0
2
4
6
8
10 12 14 16 18 20
0
2
4
6
8
10 12 14 16 18 20
Time t(μs)
Time t(μs)
22
R1163x
R1163x151x ECO=L
R1163x151x ECO=L
V
IN=2.5V, CIN=1μF COUT=0.47μF
VIN=3.8V, CIN=1μF COUT=1μF
1.9
1.8
1.7
1.6
1.5
1.4
1.3
20
10
1.9
1.8
1.7
1.6
1.5
1.4
1.3
20
10
Output Current
Output Current
0
0
-10
-20
-30
-40
-10
-20
-30
-40
Output Voltage
Output Voltage
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Time t(ms)
Time t(ms)
R1163x281x ECO=H
R1163x281x ECO=H
V
IN=3.8V, CIN=1μF COUT=0.47μF
VIN=3.8V, CIN=1μF COUT=1μF
3.2
3.1
3.0
2.9
2.8
2.7
2.6
150
100
50
3.2
3.1
3.0
2.9
2.8
2.7
2.6
150
100
50
Output Current
Output Current
0
0
-50
-100
-150
-50
-100
-150
Output Voltage
Output Voltage
0
2
4
6
8
10 12 14 16 18 20
0
2
4
6
8
10 12 14 16 18 20
Time t(μs)
Time t(μs)
R1163x281x ECO=H
R1163x281x ECO=H
V
IN=3.8V, CIN=1μF COUT=0.47μF
VIN=3.8V, CIN=1μF COUT=1μF
3.2
3.1
3.0
2.9
2.8
2.7
2.6
60
30
3.2
3.1
3.0
2.9
2.8
2.7
2.6
60
30
Output Current
Output Current
0
0
-30
-60
-90
-120
-30
-60
-90
-120
Output Voltage
Output Voltage
0
2
4
6
8
10 12 14 16 18 20
0
2
4
6
8
10 12 14 16 18 20
Time t(μs)
Time t(μs)
23
R1163x
R1163x281x ECO=L
R1163x281x ECO=L
V
IN=3.8V, CIN=1μF COUT=0.47μF
VIN=3.8V, CIN=1μF COUT=1μF
3.6
3.4
3.2
3.0
2.8
2.6
2.4
20
10
3.6
3.4
3.2
3.0
2.8
2.6
2.4
20
10
Output Current
Output Current
0
0
-10
-20
-30
-40
-10
-20
-30
-40
Output Voltage
Output Voltage
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Time t(ms)
Time t(ms)
14) Turn on speed with CE pin
R1163x151x ECO=H
R1163x151x ECO=L
V
IN=2.5V,
VIN=2.5V,
C
IN=1μF COUT=0.47μF IOUT=0mA
C
IN=1μF COUT=0.47μF IOUT=0mA
3
2
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
3
2
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
CE Input Voltage
CE Input Voltage
1
1
0
0
-1
-2
-3
-4
-5
-1
-2
-3
-4
-5
Output Voltage
Output Voltage
-8 -4
0
4
8
12 16 20 24 28 32
-40 -20
0
20 40 60 80 100 120
Time t(μs)
Time t(ms)
R1163x151x ECO=H
R1163x151x ECO=L
V
IN=2.5V,
V
IN=2.5V,
C
IN=1μF COUT=0.47μF IOUT=30mA
C
IN=1μF COUT=0.47μF IOUT=30mA
3
2
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
3
2
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
CE Input Voltage
CE Input Voltage
1
1
0
0
-1
-2
-3
-4
-5
-1
-2
-3
-4
-5
Output Voltage
Output Voltage
-8 -4
0
4
8
12 16 20 24 28 32
-0.2 -0.1
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Time t(ms)
Time t(μs)
24
R1163x
R1163x151x ECO=H
R1163x151x ECO=L
VIN=2.5V,
VIN=2.5V,
C
IN=1μF COUT=0.47μF IOUT=150mA
C
IN=1μF COUT=0.47μF IOUT=150mA
3
2
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
3
2
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
CE Input Voltage
CE Input Voltage
1
1
0
0
-1
-2
-3
-4
-5
-1
-2
-3
-4
-5
Output Voltage
Output Voltage
-8 -4
0
4
8
12 16 20 24 28 32
-0.2 -0.1
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Time t(ms)
Time t(μs)
R1163x281x ECO=H
R1163x281x ECO=L
VIN=3.8V,
VIN=3.8V,
CIN=1μF COUT=0.47μF IOUT=0mA
CIN=1μF COUT=0.47μF IOUT=0mA
6
4
7
6
6
4
7
6
2
5
2
5
CE Input Voltage
CE Input Voltage
0
4
0
4
-2
-4
-6
-8
-10
3
-2
-4
-6
-8
-10
3
2
2
Output Voltage
Output Voltage
1
1
0
0
-1
-1
-20 -10 0 10 20 30 40 50 60 70 80
-20 -10 0 10 20 30 40 50 60 70 80
Time t(μs)
Time t(ms)
R1163x281x ECO=H
R1163x281x ECO=L
VIN=3.8V,
VIN=3.8V,
CIN=1μF COUT=0.47μF IOUT=30mA
CIN=1μF COUT=0.47μF IOUT=30mA
6
4
7
6
6
4
7
6
2
5
2
5
CE Input Voltage
CE Input Voltage
0
4
0
4
-2
-4
-6
-8
-10
3
-2
-4
-6
-8
-10
3
2
2
Output Voltage
Output Voltage
1
1
0
0
-1
-1
-20 -10 0 10 20 30 40 50 60 70 80
-0.1 -0
0
0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32
Time t(μs)
Time t(ms)
25
R1163x
R1163x281x ECO=H
R1163x281x ECO=L
V
IN=3.8V,
VIN=3.8V,
CIN=1μF COUT=0.47μF IOUT=150mA
CIN=1μF COUT=0.47μF IOUT=150mA
6
4
7
6
6
4
7
6
2
5
2
5
CE Input Voltage
CE Input Voltage
0
4
0
4
-2
-4
-6
-8
-10
3
-2
-4
-6
-8
-10
3
2
2
Output Voltage
Output Voltage
1
1
0
0
-1
-1
-20 -10 0 10 20 30 40 50 60 70 80
-0.1 -0
0
0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32
Time t(μs)
Time t(ms)
R1163x401x ECO=H
R1163x401x ECO=L
V
IN=5.0V,
VIN=5.0V,
CIN=1μF COUT=0.47μF IOUT=0mA
CIN=1μF COUT=0.47μF IOUT=0mA
6
4
8
7
6
4
8
7
CE Input Voltage
CE Input Voltage
2
6
2
6
0
5
0
5
-2
-4
-6
-8
-10
-12
4
-2
-4
-6
-8
-10
-12
4
3
3
Output Voltage
Output Voltage
2
2
1
1
0
0
-1
-1
-20 -10 0 10 20 30 40 50 60 70 80
-8 -4
0
4
8
12 16 20 24 28 32
Time t(μs)
Time t(ms)
R1163x401x ECO=H
R1163x401x ECO=L
V
IN=5.0V,
VIN=5.0V,
CIN=1μF COUT=0.47μF IOUT=30mA
CIN=1μF COUT=0.47μF IOUT=30mA
6
4
8
7
6
4
8
7
CE Input Voltage
CE Input Voltage
2
6
2
6
0
5
0
5
-2
-4
-6
-8
-10
-12
4
-2
-4
-6
-8
-10
-12
4
3
3
Output Voltage
Output Voltage
2
2
1
1
0
0
-1
-1
-20 -10 0 10 20 30 40 50 60 70 80
-0.1 -0
0
0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32
Time t(μs)
Time t(ms)
26
R1163x
R1163x401x ECO=H
R1163x401x ECO=L
VIN=5.0V,
VIN=5.0V,
CIN=1μF COUT=0.47μF IOUT=150mA
CIN=1μF COUT=0.47μF IOUT=150mA
6
4
8
7
6
4
8
7
CE Input Voltage
CE Input Voltage
2
6
2
6
0
5
0
5
-2
-4
-6
-8
-10
-12
4
-2
-4
-6
-8
-10
-12
4
3
3
Output Voltage
Output Voltage
2
2
1
1
0
0
-1
-1
-20 -10 0 10 20 30 40 50 60 70 80
-0.1 -0
0
0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32
Time t(μs)
Time t(ms)
15) Turn off speed with CE pin
R1163x151xD
R1163x281xD
V
IN=2.5V, CIN=1μF COUT=0.47μF
V
IN=3.8V, CIN=1μF COUT=0.47μF
3
2
3.5
4
3
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
-1.0
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
CE Input Voltage
CE Input Voltage
2
1
1
0
0
-1
-2
-3
-4
-5
I
I
I
OUT=0mA
I
I
I
OUT=0mA
-1
-2
-3
-4
-5
OUT=30mA
OUT=150mA
OUT=30mA
OUT=150mA
Output Voltage
Output Voltage
-0.1 -0
0
0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32
-0.1 -0
0
0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32
Time t(ms)
Time t(ms)
R1163x401xD
V
IN=5.0V, CIN=1μF COUT=0.47μF
6
5
4
11
10
9
CE Input Voltage
3
8
2
7
1
6
0
5
-1
-2
-3
-4
-5
-6
4
3
2
1
0
-1
I
I
I
OUT=0mA
OUT=30mA
OUT=150mA
Output Voltage
-0.1 -0
0
0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32
Time t(ms)
27
R1163x
16) Output Voltage at Mode alternative point
R1163x151B/D
R1163x281B/D
V
IN=2.5V, CIN=Ceramic 1.0μF,
OUT=Ceramic 0.47μF
V
IN=3.8V, CIN=Ceramic 1.0μF,
C
COUT=Ceramic 0.47μF
3
2
4
3
1
2
0
1
-1
0
1.52
1.50
1.48
1.52
1.50
1.48
1.52
1.50
1.48
1.52
1.50
1.48
1.52
1.50
1.48
2.82
2.80
2.78
2.82
2.80
2.78
2.82
2.80
2.78
2.82
2.80
2.78
2.82
2.80
2.78
-1
I
OUT=1mA
I
I
OUT=1mA
IOUT=10mA
OUT=10mA
IOUT=50mA
I
I
OUT=50mA
IOUT=100mA
OUT=100mA
IOUT=150mA
I
OUT=150mA
-0.1 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
-0.1 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
Time t(ms)
Time t(ms)
1.56
1.55
1.54
1.53
1.52
1.51
1.50
1.49
1.48
3
2
1
0
2.86
2.85
2.84
2.83
2.82
2.81
2.80
2.79
2.78
4
3
2
1
0
-1
-2
-3
-4
-5
-1
-2
-3
-4
IOUT=0mA
I
OUT=0mA
-10 0 10 20 30 40 50 60 70 80 90
-10 0 10 20 30 40 50 60 70 80 90
Time t(ms)
Time t(ms)
28
R1163x
TECHNICAL NOTES
When using these ICs, consider the following points:
In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For
this purpose, be sure to use a capacitor COUT with good frequency characteristics and ESR (Equivalent Series
Resistance) in the range described as follows:
The relations between IOUT (Output Current) and ESR of Output Capacitor are shown below. The conditions
when the white noise level is under 40µV (Avg.) are marked as the hatched area in the graph.
<Test conditions>
(1) Frequency band: 10Hz to 2MHz
R1163x151x ECO=H
R1163x151x ECO=L
V
IN=2.0V to 6.0V, CIN=1μF COUT=0.47μF
VIN=2.0V to 6.0V, CIN=1μF COUT=0.47μF
100
10
100
10
Topt=85°C Topt=25°C
Topt=-40°C
1
1
0.1
0.01
0.1
0.01
0
20 40 60 80 100 120 140
Load Current IOUT(mA)
0
20 40 60 80 100 120 140
Load Current IOUT(mA)
R1163x281x ECO=H
R1163x281x ECO=L
V
IN=3.1V to 6.0V, CIN=1μF COUT=0.47μF
VIN=3.1V to 6.0V, CIN=1μF COUT=0.47μF
100
10
100
10
Topt=85°C Topt=25°C
Topt=-40°C
1
1
0.1
0.01
0.1
0.01
0
20 40 60 80 100 120 140
Load Current IOUT(mA)
0
20 40 60 80 100 120 140
Load Current IOUT(mA)
29
相关型号：
R1163N431D-TR-FE
Fixed Positive LDO Regulator, 4.3V, 0.35V Dropout, CMOS, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, SOT-23, 5 PIN
RICOH
©2020 ICPDF网 联系我们和版权申明