R1114N161D-TR-AE [RICOH]
Fixed Positive LDO Regulator;型号: | R1114N161D-TR-AE |
厂家: | RICOH ELECTRONICS DEVICES DIVISION |
描述: | Fixed Positive LDO Regulator 输出元件 调节器 |
文件: | 总26页 (文件大小:696K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
R1114N Series
Low Noise 150 mA LDO Regulator for Automotive Applications
NO.EC-094-131219
OUTLINE
The R1114x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, low supply
current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an
error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. The line transient response and load
transient response of the R1114x Series are excellent, thus these ICs are very suitable for the power supply for
hand-held communication equipment.
The output voltage of these ICs is fixed with high accuracy. Since the package for these ICs is SOT-23-5, the
high density mounting of the ICs on boards is possible.
FEATURES
• Input Voltage Range (Maximum Rating) ............................ 2.0V to 6V (6.5V)
• Supply Current..................................................................... Typ. 75μA
• Standby Mode...................................................................... Typ. 0.1μA
• Dropout Voltage ................................................................... Typ. 0.22V (IOUT=150mA 3.0V Output type)
• Ripple Rejection................................................................... Typ. 70dB (f=1kHz 3.0V Output type)
Typ. 60dB (f=10kHz)
• Output Voltage Range..........................................................1.5V to 4.0V (0.1V steps)
(For other voltages, please refer to MARK SPECIFICATION TABLE)
• Output Voltage Accuracy...................................................... ±2.0%
• Temperature-Drift Coefficient of Output Voltage.................. Typ. ±100ppm/°C
• Line Regulation....................................................................Typ. 0.02%/V
• Output Noise........................................................................ TYP. 30μVrms (BW=10Hz~100kHz)
•
Packages ............................................................................ SOT-23-5
• Built-in Fold Back Protection Circuit .................................... Typ. 40mA (Current at short mode)
•
Ceramic capacitors are recommended to be used with this IC ... CIN=COUT=1μF (VOUT<2.5V)
>
CIN=1μF, COUT=0.47μF (VOUT 2.5V)
=
APPLICATIONS
• Power source for accessories such as car audios, car navigation systems, and ETC systems
1
R1114N
NO.EC-094-131219
BLOCK DIAGRAMS
R1114xxx1A
R1114xxx1B
1
VDD
5
VDD
VOUT
VOUT
-
+
Vref
Vref
Current Limit
CE
3
Current Limit
GND
2
GND
CE
R1114xxx1D
V
DD
VOUT
-
+
Vref
Current Limit
GND
CE
2
R1114N
NO.EC-094-131219
SELECTION GUIDE
The output voltage, auto discharge function, and the taping type, etc. for the ICs can be selected at the user’s
request.
Product Name
R1114Nxx1∗-TR-#E
Package
Quantity per Reel
Pb Free
Halogen Free
SOT-23-5
3,000 pcs
Yes
Yes
xx: The output voltage can be designated in the range from 1.5V(15) to 4.0V(40) in 0.1V steps.
(For other voltages, please refer to MARK SPECIFICATION TABLE)
∗ : CE pin polarity and auto discharge function at off state are options as follows.
(A) "L" active, without auto discharge function at off state
(B) "H" active, without auto discharge function at off state
(D) "H" active, with auto discharge function at off state
# : Specify Automotive Class Code
Operating
Temperature Range
-40°C to 85°C
Guaranteed Specs
Temperature Range
25°C
Screening
A
High Temperature
* Auto-discharge function quickly lowers the output voltage to 0V, when the chip enable signal is switched from the active
mode to the standby mode, by releasing the electrical charge accumulated in the external capacitor.
PIN DESCRIPTIONS
z SOT-23-5
5
4
(mark side)
1
2
3
• R1114N
Pin No.
Symbol
VDD
Description
1
2
3
4
5
Input Pin
GND
Ground Pin
Chip Enable Pin
No Connection
Output pin
CE
or CE
NC
VOUT
3
R1114N
NO.EC-094-131219
ABSOLUTE MAXIMUM RATINGS
Symbol
VIN
Item
Rating
6.5
Unit
V
Input Voltage
VCE
6.5
V
CE
Input Voltage (
Output Voltage
Output Current
or CE Pin)
VOUT
IOUT
V
−0.3~VIN+0.3
200
mA
mW
°C
°C
Power Dissipation (SOT-23-5)∗
PD
420
Tj
Junction Temperature
−40~125
−55~125
Tstg
Storage Temperature Range
∗) Refer to PACKAGE INFORMATION for detailed information.
ABSOLUTE MAXIMUM RATINGS
Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the permanent
damages and may degrade the life time and safety for both device and system using the device in the field. The
functional operation at or over these absolute maximum ratings is not assured.
RECOMMENDED OPERATING RATINGS
Symbol
Item
Rating
2.0 to 6
Unit
V
VIN
Input Voltage
Operating Temperature Range
Ta
−40 to 85
°C
RECOMMENDED OPERATING RATINGS
All of electronic equipment should be designed that the mounted semiconductor devices operate within the
recommended operating ratings. The semiconductor devices cannot operate normally over the recommended
operating ratings, even if when they are used over such ratings by momentary electronic noise or surge. And the
semiconductor devices may receive serious damage when they continue to operate over the recommended
operating ratings.
4
R1114N
NO.EC-094-131219
ELECTRICAL CHARACTERISTICS
• R1114xxx1A
(Ta=25°C)
Symbol
VOUT
Item
Output Voltage
Output Current
Load Regulation
Conditions
Min.
×0.980
150
Typ.
Max.
Unit
VIN = Set VOUT+1V
V
×1.020
1mA
IOUT
30mA
=
=
IOUT
mA
mV
VIN−VOUT = 1.0V
VIN = Set VOUT+1V
22
40
ΔVOUT/ΔIOUT
1mA
IOUT
150mA
=
=
Refer to the Product-specific
Electrical Characteristics
VDIF
ISS
Dropout Voltage
Supply Current
IOUT = 150mA
75
95
VIN = Set VOUT+1V, IOUT = 0mA
μA
μA
Supply Current
(Standby)
VIN = Set VOUT+1V
VCE = VDD
Istandby
0.1
1.0
VOUT > 1.7V,
Set VOUT+0.5V VIN 6.0V
=
=
Line Regulation
0.02
0.10
%/V
ΔVOUT/ΔVIN
(VOUT
1.7V, 2.2V ≤ VIN 6.0V)
=
=
IOUT = 30mA
ISC
Short Current Limit
40
mA
MΩ
V
VOUT = 0V
RPU
VCEH
VCEL
0.7
1.5
0.0
2.0
8.0
6.0
0.3
CE
CE
CE
Pull-up Resistance
Input Voltage “H”
Input Voltage “L”
V
5
R1114N
NO.EC-094-131219
• R1114xxx1B/D
(Ta=25°C)
Symbol
Item
Conditions
Min.
×0.980
150
Typ.
Max.
Unit
VIN = Set VOUT+1V
VOUT
IOUT
Output Voltage
Output Current
Load Regulation
V
×1.020
1mA
IOUT
30mA
=
=
mA
mV
VIN−VOUT = 1.0V
VIN = Set VOUT+1V
22
40
ΔVOUT/ΔIOUT
1mA
IOUT
150mA
=
=
Refer to the Product-specific
Electrical Characteristics
VDIF
ISS
Dropout Voltage
IOUT = 150mA
Supply Current
75
95
VIN = Set VOUT+1V, IOUT = 0mA
μA
μA
VIN = Set VOUT+1V
VCE = GND
Istandby
Supply Current (Standby)
0.1
1.0
VOUT > 1.7V,
Set VOUT+0.5V VIN 6.0V
=
=
Line Regulation
0.02
0.10
%/V
ΔVOUT/ΔVIN
(VOUT 1.7V, 2.2V ≤
=
VIN
6.0V) IOUT = 30mA
=
ISC
Short Current Limit
40
mA
MΩ
V
VOUT = 0V
RPD
VCEH
VCEL
CE Pull-down Resistance
CE Input Voltage “H”
CE Input Voltage “L”
0.7
1.5
0.0
2.0
8.0
6.0
0.3
V
On Resistance of Nch for
auto-discharge
(Only for D version)
RLOW
60
VCE = 0V
Ω
6
R1114N
NO.EC-094-131219
Product-specific Electrical Characteristics
(Ta=25°C)
V
OUT [V]
VDIF [V]
Product Name
MIN.
TYP.
MAX.
1.530
1.632
1.734
1.836
1.887
1.938
2.040
2.142
2.244
2.346
2.448
2.550
2.652
2.754
2.856
2.907
2.958
3.060
3.162
3.264
3.366
3.468
3.570
3.672
3.774
3.876
3.978
4.080
TYP.
0.38
0.36
0.34
MAX.
0.70
0.65
0.60
R1114N151x
R1114N161x
R1114N171x
R1114N181x
R1114N181x5
R1114N191x
R1114N201x
R1114N211x
R1114N221x
R1114N231x
R1114N241x
R1114N251x
R1114N261x
R1114N271x
R1114N281x
R1114N281x5
R1114N291x
R1114N301x
R1114N311x
R1114N321x
R1114N331x
R1114N341x
R1114N351x
R1114N361x
R1114N371x
R1114N381x
R1114N391x
R1114N401x
1.470
1.568
1.666
1.764
1.813
1.862
1.960
2.058
2.156
2.254
2.352
2.450
2.548
2.646
2.744
2.793
2.842
2.940
3.038
3.136
3.234
3.332
3.430
3.528
3.626
3.724
3.822
3.920
1.500
1.600
1.700
1.800
1.850
1.900
2.000
2.100
2.200
2.300
2.400
2.500
2.600
2.700
2.800
2.850
2.900
3.000
3.100
3.200
3.300
3.400
3.500
3.600
3.700
3.800
3.900
4.000
0.32
0.55
0.28
0.50
0.22
0.35
7
R1114N
NO.EC-094-131219
TYPICAL APPLICATIONS
CE
CE
R1114Nxx1A
SERIES
R1114xxx1B
SERIES
IN
V
DD
VOUT
OUT IN
V
DD
VOUT
OUT
+
+
+
+
Cap.
Cap.
Cap.
Cap.
GND
GND
(External Components)
Output Capacitor; Ceramic 0.47μF (Set Output Voltage in the range from 2.5 to 4.0V)
Ceramic 1.0μF (Set Output Voltage in the range from 1.5 to 2.4V)
Input Capacitor; Ceramic 1.0μF
TECHNICAL NOTES
When using these ICs, consider the following points:
Phase Compensation
In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For
this purpose, use a capacitor COUT with good frequency characteristics and ESR (Equivalent Series Resistance).
Recommended C2 Values
Output Voltage
RecommendedC2 values
VOUT ≤ 2.4V
2.5V ≤ VOUT
1.0μF or more
0.47μF or more
When using a tantalum type capacitor and the ESR value of the capacitor is large, the output might be unstable.
Evaluate a circuit including consideration of frequency characteristics.
PCB Layout
Make VDD and GND lines sufficient. If their impedance is high, noise pickup or unstable operation may result.
Connect a capacitor with a capacitance value as much as 1.0μF or more between VDD and GND pin, and as
close as possible to the pins.
Set external components, especially the output capacitor, as close as possible to the ICs, and make wiring as
short as possible.
8
R1114N
NO.EC-094-131219
TYPICAL APPLICATION FOR IC CHIP BREAKDOWN PREVENTION
CE
IN
OUT
R1114xxx1B VOUT
Series
VDD
+
+
D1
Cap.
Cap.
GND
(External Components)
Output Capacitor; Ceramic 0.47μF (Set Output Voltage in the range from 2.5 to 4.0V)
Ceramic 1.0μF (Set Output Voltage in the range from 1.5 to 2.4V)
Input Capacitor; Ceramic 1.0μF
When a sudden surge of electrical current travels along the VOUT pin and GND due to a short-circuit, electrical
resonance of a circuit involving an output capacitor and a short circuit inductor generates a negative voltage and
may damage the device or the load devices. Connecting a schottky diode (D1) between the VOUT pin and GND
has the effect of preventing damage to them.
9
R1114N
NO.EC-094-131219
PACKAGE INFORMATION
POWER DISSIPATION (SOT-23-5)
Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the
measurement at the condition below:
(Power Dissipation (SOT-23-5) is substitution of SOT-23-6.)
* Measurement Conditions
Standard Test Land Pattern
Environment
Board Material
Board Dimensions
Copper Ratio
Mounting on Board (Wind velocity=0m/s)
Glass cloth epoxy plastic (Double sided)
40mm x 40mm x 1.6mm
Top side: Approx. 50%, Back side: Approx. 50%
φ 0.5mm x 44pcs
Through-holes
* Measurement Result:
(Ta=25°C, Tjmax=125°C)
Standard Land Pattern
420mW
Free Air
250mW
400°C/W
Power Dissipation
Thermal Resistance
θja = (125-25°C)/0.42W= 238°C/W
600
500
40
On Board
420
250
400
300
200
100
Free Air
0
0
25
50
75 85 100
125
150
Measurement Board Pattern
Ambient Temperature (°C)
IC Mount Area (Unit: mm)
Power Dissipation
10
R1114N
NO.EC-094-131219
PACKAGE DIMENSIONS (SOT-23-5)
2.9±0.2
1.9±0.2
1.1±0.1
0.8±0.1
(0.95) (0.95)
5
4
0~0.1
1
2
3
+0.1
0.15-0.05
0.4±0.1
Unit : mm
SOT-23-5 Package Dimensions
MARK SPECIFICATION (SOT-23-5)
cde: Product Code … Refer to MARK SPECIFICATION TABLE (SOT-23-5)
fg: Lot Number … Alphanumeric Serial Number
5
4
cdefg
1
2
3
SOT-23-5 Mark Specification
11
R1114N
NO.EC-094-131219
MARK SPECIFICATION TABLE (SOT-23-5)
R1114Nxx1A
Product Name
R1114N151A
R1114N161A
R1114N171A
R1114N181A
R1114N191A
R1114N201A
R1114N211A
R1114N221A
R1114N231A
R1114N241A
R1114N251A
R1114N261A
R1114N271A
R1114N281A
R1114N291A
R1114N301A
R1114N311A
R1114N321A
R1114N331A
R1114N341A
R1114N351A
R1114N361A
R1114N371A
R1114N381A
R1114N391A
R1114N401A
R1114Nxx1B
Product Name
R1114N151B
R1114N161B
R1114N171B
R1114N181B
R1114N191B
R1114N201B
R1114N211B
R1114N221B
R1114N231B
R1114N241B
R1114N251B
R1114N261B
R1114N271B
R1114N281B
R1114N291B
R1114N301B
R1114N311B
R1114N321B
R1114N331B
R1114N341B
R1114N351B
R1114N361B
R1114N371B
R1114N381B
R1114N391B
R1114N401B
R1114N281B5
R1114N181B5
R1114Nxx1D
Product Name
R1114N151D
R1114N161D
R1114N171D
R1114N181D
R1114N191D
R1114N201D
R1114N211D
R1114N221D
R1114N231D
R1114N241D
R1114N251D
R1114N261D
R1114N271D
R1114N281D
R1114N291D
R1114N301D
R1114N311D
R1114N321D
R1114N331D
R1114N341D
R1114N351D
R1114N361D
R1114N371D
R1114N381D
R1114N391D
R1114N401D
R1114N281D5
R1114N181D5
VSET
VSET
VSET
1.5 V
1.6 V
1.7 V
1.8 V
1.9 V
2.0 V
2.1 V
2.2 V
2.3 V
2.4 V
2.5 V
2.6 V
2.7 V
2.8 V
2.9 V
3.0 V
3.1 V
3.2 V
3.3 V
3.4 V
3.5 V
3.6 V
3.7 V
3.8 V
3.9 V
4.0 V
①②③
①②③
①②③
6 1 5
6 1 6
6 1 7
6 1 8
6 1 9
6 2 0
6 2 1
6 2 2
6 2 3
6 2 4
6 2 5
6 2 6
6 2 7
6 2 8
6 2 9
6 3 0
6 3 1
6 3 2
6 3 3
6 3 4
6 3 5
6 3 6
6 3 7
6 3 8
6 3 9
6 4 0
4 1 5 1.5 V
4 1 6 1.6 V
4 1 7 1.7 V
4 1 8 1.8 V
4 1 9 1.9 V
5 1 5 1.5 V
5 1 6 1.6 V
5 1 7 1.7 V
5 1 8 1.8 V
5 1 9 1.9 V
4 2 0
4 2 1
4 2 2
4 2 3
4 2 4
4 2 5
4 2 6
4 2 7
4 2 8
4 2 9
4 3 0
4 3 1
4 3 2
4 3 3
4 3 4
4 3 5
4 3 6
4 3 7
4 3 8
4 3 9
4 4 0
5 2 0
5 2 1
5 2 2
5 2 3
5 2 4
5 2 5
5 2 6
5 2 7
5 2 8
5 2 9
5 3 0
5 3 1
5 3 2
5 3 3
5 3 4
5 3 5
5 3 6
5 3 7
5 3 8
5 3 9
5 4 0
2.0 V
2.1 V
2.2 V
2.3 V
2.4 V
2.5 V
2.6 V
2.7 V
2.8 V
2.9 V
3.0 V
3.1 V
3.2 V
3.3 V
3.4 V
3.5 V
3.6 V
3.7 V
3.8 V
3.9 V
4.0 V
2.0 V
2.1 V
2.2 V
2.3 V
2.4 V
2.5 V
2.6 V
2.7 V
2.8 V
2.9 V
3.0 V
3.1 V
3.2 V
3.3 V
3.4 V
3.5 V
3.6 V
3.7 V
3.8 V
3.9 V
4.0 V
R1114N281A5 4 4 1 2.85 V
R1114N181A5 4 4 2 1.85 V
5 4 1 2.85 V
5 4 2 1.85 V
6 4 1 2.85 V
6 4 2 1.85 V
12
R1114N
NO.EC-094-131219
TEST CIRCUITS
CE
CE
V
OUT
V
DD
V
OUT
VDD
IN
OUT
IN
I
OUT
R1114xxx1B/D
SERIES
R1114xxx1B/D
SERIES
I
OUT
SS
1.0μF
1.0
μ
F
1.0
μF
1.0μF
GND
GND
Standard test Circuit
Supply Current Test Circuit
CE
CE
VOUT
V
OUT
VDD
VDD
IN
OUT
IN
OUT
R1114xxx1B/D
SERIES
R1114xxx1B/D
SERIES
IOUT
1.0μF
P.G.
1.0 F
1.0μF
GND
GND
I1 I2
Ripple Rejection, Line Transient
Response Test Circuit
Load Transient Response Test Circuit
13
R1114N
NO.EC-094-131219
TYPICAL CHARACTERISTICS
Note: Typical Characteristics are intended to be used as reference data; they are not guaranteed.
1) Output Voltage vs. Output Current (Ta=25°C)
R1114x151x
R1114x281x
3.0
2.5
2.0
1.5
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
V
IN=4.8V
1.8V
3.1V
300
1.0
0.5
0.0
V
IN=3.5V
3.8V
200
3.5V
2.5V
2.0V
200
0
100
400
0
100
300
400
Output Current IOUT(mA)
Output Current IOUT(mA)
R1114x401x
4.5
4.0
3.5
3.0
VIN=6.0V
2.5
2.0
1.5
4.3V
4.5V
5.0V
1.0
0.5
0.0
0
100
200
300
400
Output Current IOUT(mA)
2)
Output Voltage vs. Input Voltage (Ta=25°C)
R1114x151x
R1114x281x
2.9
2.8
2.7
2.6
2.5
2.4
2.3
2.2
2.1
2.0
1.7
1.6
1.5
1.4
1.3
I
I
I
OUT=1mA
I
I
I
OUT=1mA
1.2
1.1
1.0
OUT=30mA
OUT=50mA
OUT=30mA
OUT=50mA
2
3
4
5
6
1
2
3
4
5
6
Input Voltage VIN(V)
Input Voltage VIN(V)
14
R1114N
NO.EC-094-131219
R1114x401x
4.2
4.0
3.8
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
3.6
3.4
3.2
3.0
1
2
3
4
5
6
Input Voltage VIN(V)
3) Supply Current vs. Input Voltage (Ta=25°C)
R1114x151x
R1114x281x
90
90
80
70
60
50
40
30
20
10
0
80
70
60
50
40
30
20
10
0
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage VIN(V)
Input Voltage VIN(V)
R1114x401x
90
80
70
60
50
40
30
20
10
0
0
1
2
3
4
5
6
Input Voltage VIN(V)
15
R1114N
NO.EC-094-131219
4) Output Voltage vs. Temperature
R1114x151x
R1114x281x
2.86
2.84
2.82
2.80
2.78
2.76
1.53
1.52
1.51
1.50
1.49
1.48
1.47
1.46
2.74
-40
-15
10
35
60
85
-40
-15
10
35
60
85
Temperature Topt(°C)
Temperature Topt(°C)
R1114x401x
4.08
4.06
4.04
4.02
4.00
3.98
3.96
3.94
3.92
-40
-15
10
35
60
85
Temperature Topt(°C)
5) Supply Current vs. Temperature
R1114x151x
R1114x281x
90
90
80
70
60
50
40
30
20
10
0
80
70
60
50
40
30
20
10
0
-40
-15
10
35
60
85
-40
-15
10
35
60
85
Temperature Topt(°C)
Temperature Topt(°C)
16
R1114N
NO.EC-094-131219
R1114x401x
90
80
70
60
50
40
30
20
10
0
-40
-15
10
35
60
85
Temperature Topt(°C)
6) Dropout Voltage vs. Temperature
R1114x151x
R1114x161x
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0.6
85°C
25°C
-40°C
85°C
0.5
0.4
0.3
0.2
0.1
0.0
25°C
-40°C
0
25
50
75
100 125 150
0
25
50
75
100 125 150
Output Current IOUT(mA)
Output Current IOUT(mA)
R1114x171x
R1114x181x
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0.6
85°C
25°C
-40°C
85°C
25°C
-40°C
0.5
0.4
0.3
0.2
0.1
0.0
0
25
50
75
100 125 150
0
25
50
75
100 125 150
Output Current IOUT(mA)
Output Current IOUT(mA)
17
R1114N
NO.EC-094-131219
R1114x211x
R1114x281x
0.40
0.35
0.30
0.25
0.20
0.40
0.35
0.30
0.25
0.20
85°C
25°C
-40°C
85°C
25°C
-40°C
0.15
0.10
0.05
0.00
0.15
0.10
0.05
0.00
0
25
50
75
100 125 150
0
25
50
75
100 125 150
Output Current IOUT(mA)
Output Current IOUT(mA)
R1114x401x
0.40
0.35
0.30
0.25
0.20
85°C
25°C
-40°C
0.15
0.10
0.05
0.00
0
25
50
75
100 125 150
Output Current IOUT(mA)
7) Dropout Voltage vs. Set Output Voltage (Ta=25°C)
0.60
10mA
30mA
0.50
50mA
150mA
0.40
0.30
0.20
0.10
0.00
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Set Output Voltage VREG(V)
18
R1114N
NO.EC-094-131219
8) Ripple Rejection vs. Input Bias Voltage (Ta=25°C, CIN=none, COUT=ceramic0.47μF)
R1114x281x R1114x281x
Ripple 0.2Vp-p, IOUT=1mA
Ripple 0.5Vp-p, IOUT=1mA
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
f=1kHz
f=10kHz
f=100kHz
f=1kHz
f=10kHz
f=100kHz
2.9
3.0
3.1
3.2
3.3
2.9
3.0
3.1
3.2
3.3
Input Voltage VIN(V)
Input Voltage VIN(V)
R1114x281x
R1114x281x
Ripple 0.2Vp-p, IOUT=30mA
Ripple 0.5Vp-p, IOUT=30mA
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
f=1kHz
f=10kHz
f=100kHz
f=1kHz
f=10kHz
f=100kHz
2.9
3.0
3.1
3.2
3.3
2.9
3.0
3.1
3.2
3.3
Input Voltage VIN(V)
Input Voltage VIN(V)
R1114x281x
R1114x281x
Ripple 0.2Vp-p, IOUT=50mA
Ripple 0.5Vp-p, IOUT=50mA
f=1kHz
f=10kHz
f=100kHz
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
f=1kHz
f=10kHz
f=100kHz
2.9
3.0
3.1
3.2
3.3
2.9
3.0
3.1
3.2
3.3
Input Voltage VIN(V)
Input Voltage VIN(V)
19
R1114N
NO.EC-094-131219
9) Ripple Rejection vs. Frequency (CIN=none)
R1114x151x
R1114x151x
VIN=2.5VDC+0.5Vp-p,
V
IN=2.5VDC+0.5Vp-p,
C
OUT=Ceramic 1.0
μ
F
C
OUT=Ceramic 2.2μF
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
0.1
1
10
100
0.1
1
10
100
Frequency f(kHz)
Frequency f(kHz)
R1114x281x
R1114x281x
V
IN=3.8VDC+0.5Vp-p,
V
IN=3.8VDC+0.5Vp-p,
C
OUT=Ceramic 0.47
μ
F
C
OUT=Ceramic 1.0
μ
F
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
0.1
1
10
100
0.1
1
10
100
Frequency f(kHz)
Frequency f(kHz)
R1114x401x
R1114x401x
V
IN=5.0VDC+0.5Vp-p,
VIN=5.0VDC+0.5Vp-p,
C
OUT=Ceramic 0.47
μ
F
C
OUT=Ceramic 1.0
μ
F
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
I
I
I
OUT=1mA
OUT=30mA
OUT=50mA
0
0.1
0.1
1
10
100
1
10
100
Frequency f(kHz)
Frequency f(kHz)
20
R1114N
NO.EC-094-131219
10) Input Transient Response (IOUT=30mA, CIN=none, tr=tf=5μs, COUT=Ceramic 0.47μF)
R1114x151x
1.55
4
3
2
1
0
1.54
1.53
1.52
1.51
1.50
1.49
Input Voltage
Output Voltage
0
10
20
30
40
50
60
70
80
90
100
Time T(μs)
R1114x281x
2.85
2.84
2.83
2.82
2.81
2.80
2.79
6
5
4
3
Input Voltage
2
1
0
Output Voltage
0
10
20
30
40
50
60
70
80
90
100
Time T(μs)
11)
Load Transient Response (tr=tf=0.5μs, CIN=Ceramic 1.0μF)
R1114x151x
V
IN=2.5V, COUT=Ceramic 1.0
μ
F
1.75
1.70
1.65
1.60
1.55
1.50
1.45
150
100
50
Output Current
0
Output Voltage
0
2
4
6
8
10
12
14
16
18
20
Time T(μs)
21
R1114N
NO.EC-094-131219
R1114x151x
V
IN=2.5V, COUT=Ceramic 2.2
Output Current
μ
μ
μ
F
1.75
1.70
1.65
1.60
1.55
1.50
1.45
150
100
50
0
Output Voltage
0
0
0
2
2
2
4
4
4
6
6
6
8
8
8
10
12
14
16
18
20
F
Time T(μs)
R1114x281x
V
IN=3.8V, COUT=Ceramic 0.47
Output Current
3.05
3.00
2.95
2.90
2.85
2.80
2.75
150
100
50
0
Output Voltage
10
12
14
16
18
20
F
Time T(μs)
R1114x281x
V
IN=3.8V, COUT=Ceramic 1.0
Output Current
3.05
3.00
2.95
2.90
2.85
2.80
2.75
150
100
50
0
Output Voltage
10
12
14
16
18
20
Time T(μs)
22
R1114N
NO.EC-094-131219
R1114x281x
V
IN=3.8V, COUT=Ceramic 2.2
Output Current
μF
3.05
3.00
2.95
2.90
2.85
2.80
2.75
150
100
50
0
Output Voltage
0
2
4
6
8
10
12
14
16
18
20
Time T(μs)
12) Turn-on/off speed with CE pin (D version)
R1114x151D (VIN=2.5V, CIN=Ceramic 1.0μF, COUT=Ceramic 1.0μF)
4
3
2
1
0
6
4
3
2
1
0
6
5
4
3
2
1
0
5
4
3
2
1
0
V
IN
IOUT= 0mA
IOUT= 30mA
IOUT= 150mA
V
IN
I
I
I
OUT= 0mA
OUT= 30mA
OUT= 150mA
-5
0
5
10
15
20
25
-50
0
50 100 150200250 300 350 400450
Time T(μs)
Time T(μs)
R1114x281D (VIN=3.8V, CIN=Ceramic 0.47μF, COUT=Ceramic 0.47μF)
4
3
8
4
8
7
7
3
2
V
IN
2
6
5
4
3
2
1
0
6
5
4
3
2
1
0
I
I
I
OUT= 0mA
OUT= 30mA
OUT= 150mA
1
1
0
0
V
IN
-1
-1
I
I
I
OUT= 0mA
OUT= 30mA
OUT= 150mA
-5
0
5
10
15
20
25
-20
0
20 40 60 80 100 120 140160180
Time T(μs)
Time T(μs)
23
R1114N
NO.EC-094-131219
R1114x401D (VIN=5.0V, CIN=Ceramic 0.47μF, COUT=Ceramic 0.47μF)
8
14
12
10
8
8
14
12
10
8
6
4
6
4
V
IN
I
I
I
OUT= 0mA
OUT= 30mA
OUT= 150mA
V
IN
2
2
I
I
I
OUT= 0mA
OUT= 30mA
OUT= 150mA
0
0
6
6
-2
4
4
-2
2
2
0
0
-2
160
180
-2
-20
0
20 40 60 80 100120140
-5
0
5
10
15
20
25
Time T(μs)
Time T(μs)
ESR vs. Output Current
When using these ICs, consider the following points:
In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For
this purpose, use a capacitor COUT with good frequency characteristics and ESR (Equivalent Series Resistance)
of which is in the range described as follows:
CE
VOUT
Ceramic
Cap.
R1114xxx1B/D
Spectrum
Analyzer
S.A.
VIN
Ceramic
Cap.
GND
ESR
V
IN
IOUT
Measuring Circuit for white noise; R1114xxx1B/D
The relations between IOUT (Output Current) and ESR of an output capacitor are shown below. The conditions
when the white noise level is under 40μV (Avg.) are marked as the hatched area in the graph.
(Note: If additional ceramic capacitors are connected to the Output Pin with Output capacitor for phase
compensation, the operation might be unstable. Because of this, test these ICs with as same external
components as ones to be used on the PCB.)
<Measurement conditions>
(1) VIN=VOUT+1V
(2) Frequency Band: 10Hz to 2MHz
(3) Temperature: −40°C to 25°C
24
R1114N
NO.EC-094-131219
R1114x151x
R1114x161x
C
IN=Ceramic 1.0
μ
F,
μ
C
IN=Ceramic 0.47
μ
F,
μ
C
OUT=Ceramic 1.0
F
C
OUT=Ceramic 0.68
F
100
10
100
10
1
1
0.1
0.01
0.1
0.01
0
30
60
90
120
150
F,
0
30
60
90
120
150
F,
Load Current IOUT (mA)
Load Current IOUT (mA)
R1114x211x
R1114x281x
CIN=Ceramic 0.47
μ
CIN=Ceramic 0.47
μ
C
OUT=Ceramic 0.47
μ
F
C
OUT=Ceramic 0.47
μ
F
100
10
100
10
1
1
0.1
0.01
0.1
0.01
0
30
60
90
120
150
0
30
60
90
120
150
Load Current IOUT (mA)
Load Current IOUT (mA)
25
1.The products and the product specifications described in this document are subject to change or
discontinuation of production without notice for reasons such as improvement. Therefore, before
deciding to use the products, please refer to Ricoh sales representatives for the latest
information thereon.
2.The materials in this document may not be copied or otherwise reproduced in whole or in part
without prior written consent of Ricoh.
3.Please be sure to take any necessary formalities under relevant laws or regulations before
exporting or otherwise taking out of your country the products or the technical information
described herein.
4.The technical information described in this document shows typical characteristics of and
example application circuits for the products. The release of such information is not to be
construed as a warranty of or a grant of license under Ricoh's or any third party's intellectual
property rights or any other rights.
5.The products in this document are designed for automotive applications. However, when using
the products for automotive applications, please make sure to contact Ricoh sales
representative in advance due to confirming the quality level.
6.We are making our continuous effort to improve the quality and reliability of our products, but
semiconductor products are likely to fail with certain probability. In order to prevent any injury to
persons or damages to property resulting from such failure, customers should be careful enough
to incorporate safety measures in their design, such as redundancy feature, firecontainment
feature and fail-safe feature. We do not assume any liability or responsibility for any loss or
damage arising from misuse or inappropriate use of the products.
7.Anti-radiation design is not implemented in the products described in this document.
8.Please contact Ricoh sales representatives should you have any questions or comments
concerning the products or the technical information.
For the conservation of the global environment, Ricoh is advancing the decrease of the negative environmental impact material.
After Apr. 1, 2006, we will ship out the lead free products only. Thus, all products that will be shipped from now on comply with RoHS Directive.
Basically after Apr. 1, 2012, we will ship out the Power Management ICs of the Halogen Free products only. (Ricoh Halogen Free products are
also Antimony Free.)
Halogen Free
RICOH COMPANY, LTD.
Electronic Devices Company
http://www.ricoh.com/LSI/
RICOH COMPANY, LTD.
Electronic Devices Company
● Higashi-Shinagawa Office (International Sales)
3-32-3, Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-8655, Japan
Phone: +81-3-5479-2857 Fax: +81-3-5479-0502
RICOH EUROPE (NETHERLANDS) B.V.
● Semiconductor Support Centre
“Nieuw Kronenburg”Prof. W.H. Keesomlaan 1, 1183 DJ, Amstelveen, The Netherlands
P.O.Box 114, 1180 AC Amstelveen
Phone: +31-20-5474-309 Fax: +31-20-5474-791
RICOH ELECTRONIC DEVICES KOREA Co., Ltd.
11 floor, Haesung 1 building, 942, Daechidong, Gangnamgu, Seoul, Korea
Phone: +82-2-2135-5700 Fax: +82-2-2135-5705
RICOH ELECTRONIC DEVICES SHANGHAI Co., Ltd.
Room403, No.2 Building, 690#Bi Bo Road, Pu Dong New district, Shanghai 201203,
People's Republic of China
Phone: +86-21-5027-3200 Fax: +86-21-5027-3299
RICOH COMPANY, LTD.
Electronic Devices Company
● Taipei office
Room109, 10F-1, No.51, Hengyang Rd., Taipei City, Taiwan (R.O.C.)
Phone: +886-2-2313-1621/1622 Fax: +886-2-2313-1623
相关型号:
R1114N161D-TR-FE
Fixed Positive LDO Regulator, 1.6V, 0.65V Dropout, CMOS, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, SOT-23, 5 PIN
RICOH
R1114N171A-TR-FE
Fixed Positive LDO Regulator, 1.7V, 0.6V Dropout, CMOS, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, SOT-23, 5 PIN
RICOH
©2020 ICPDF网 联系我们和版权申明