QUANTAFOB-4S2 [RFSOLUTIONS]
Remote Control System;型号: | QUANTAFOB-4S2 |
厂家: | RFSOLUTIONS.LTD |
描述: | Remote Control System |
文件: | 总8页 (文件大小:2320K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
QUANTAFOB
Remote Control System
Features
• Up to 150m Range
• 433MHz FM Technology
• 1 – 4 Channels each 1000W
• 12-30Vac/dc or 230VAC versions
• Waterproof Receiver (IP68)
• New High Security RF Protocol
• 4 Changeover Relays 5A @ 230Vac
• Outputs Momentary or Latching
• Any Switch Map to Any Relay
• Systems supplied ’ready to Go’
• FCC Certified and CE Compliant
Applications
• General Purpose Remote Switching
• Electric Gates
• Roller Shutter Doors
• Garden Lighting.
Description
A highly versatile general purpose Remote Control System for many different applications.
Housed in a rugged IP68 weatherproof enclosure, The new QUANTAFOB system is ideally suited
to any remote switch requirement. Each receiver has 4 relays, using the ‘easy-learn’ process each
relay can be controlled from any switch on any transmitter. Additional transmitters may be added
to the system using the same ‘easy-learn’ process.
Installation is by screw terminals to the power supply and the output relay contacts. The output
relays are activated by the button press on the transmitter encoder.
DS QUANTAFOB-1
QUANTAFOB
Systems Part Numbers
Part Number
Description
1 ch System
Power Supply
12-30Vac/dc
Frequency
433
QUANTAFOB-4S1
QUANTAFOB-4S2
QUANTAFOB-4S3
QUANTAFOB-4S4
2 ch System
3 ch System
4 ch System
12-30Vac/dc
12-30Vac/dc
12-30Vac/dc
433
433
433
Additional Transmitters
Part Number
FOBBER-4T1
Description
1 Sw
Range*
150m
Frequency
433
FOBBER-4T2
FOBBER-4T3
FOBBER-4T4
FOBBER-4T6
FOBBER-4T8
2 Sw
3Sw
150m
150m
150m
150m
150m
433
433
433
433
433
4 Sw
6 Sw
8 Sw
**Range stated is optimum, direct line of sight. In worst conditions this can be reduced by over 50%
Custom Systems
Fobbers can be customised with logo, colour or complete
custom plastic housing for unique Branding
Please contact Sales for further info.
DS-QUANTAFOB-1
QUANTAFOB
Relay Outputs
The receiver provides 4 changeover relay switches each capable of switching up to 1.2KW (5A @ 230V). Each relay is
independent and separately controlled, and can therefore be used to switch most voltages either ac or dc.
Each output relay provides an isolated switch. Connections are Common (COM), Normally Open (NO) and Normally
Closed (NC).
Installation
Below is a simple example showing one possible way to wire a relay in order to provide switched power to an external
load:
When the relay is energised the ‘COM’ connects to ’NO’ and power is applied to the Load.
1.
Open the enclosure by removing fixing screws from the enclosure
2.
3.
4.
5.
6.
7.
Remove the antenna and slide out the circuit board.
Connect the power supply screw terminals 12-32V ac or dc to the supply terminals.
Wire your desired connections to the relay switches
Once all required wiring is complete, use the handheld QUANTA transmitter to switch the outputs on and off.
As supplied, the handheld will operate the outputs - button 1 to output 1, button 2 to output 2 etc.
Change the output functions to latching, / Momentary Operation.
DS-QUANTAFOB-1
QUANTAFOB
Configuring receivers Relays
Receivers can be used for many applications. The link pins LK1 and LK2 set the action of the relays
1/2 sec Mom = Relay will operate for half a second no matter how long a transmitter switch is operated
Mom
Latch
= Relay will operate for as long as transmitter switch operated
= Relay will toggle ON/OFF on each transmitter button press
Link Positions
Relays
LK1
LK2
RLY 1
RLY 2
RLY 3
RLY 4
Fitted
Fitted
Open
Open
Fitted
Open
Fitted
Open
1/2 sec Mom 1/2 sec Mom 1/2 sec Mom 1/2 sec Mom
Mom
Mom
Latch
Mom
Mom
Latch
Latch
Mom
Latch
Latch
Mom
Latch
DS-QUANTAFOB-1
QUANTAFOB
Advanced operation - Pairing a transmitter button with a magnet
With this system, you can pair together any individual transmitter button with
any receiver relay output. Without opening either enclosure.
All you need is a magnet.
1.
Briefly (less than 1 second) place the transmitter next to the receiver in
the position shown and then remove it.
2.
The receiver will buzz once (One beep means the receiver unit is ready to
allocate a transmitter to relay switch 1)
3.
4.
5.
Press the button on the transmitter which you wish to pair
The receiver will beep twice to confirm pairing
Repeat for any additional transmitter switches
NOTE: Each receiver has a maximum memory for up to 28 pairings, these can
be from any buttons on any transmitters!
NOTE: The switch that is operated by the magnet is on the left of the antenna.
Advanced Note: It is possible to select relay outputs 2-4, by repeating step 3
and counting the number of beeps. 2 beeps for relay 2, 3 for 3 and 4 f or 4.
Advanced operation - Erasing receiver memory with a magnet
1.
Hold the magnet in the position shown for ~5 seconds.
The receiver will sound a long ’Beep’ to confirm erased
2.
DS-QUANTAFOB-1
QUANTAFOB
Advanced Operation - Pairing a transmitter button using the internal learn switch
To pair a new transmitter switch follow this procedure
Open the receiver enclosure and extract the Circuitboard assembly
Note!: Any transmitter button can be configured to operate any of the receiver relays.
1.
Select the receiver output relay to learn to:
2.
3.
4.
5.
6.
7.
Briefly press the receiver Pairing switch (S2) once
The Learn LED will flash once to indicate relay 1 is selected
After the LED stops flashing, press the Learn switch again to select the next relay channel
Repeat step 4 until the required relay is selected.
Press the button on the transmitter you want to learn to the chosen relay.
The Learn LED will flash to indicate Pairing is complete.
Pairing a Transmitter to a Receiver
The only limitation is that each receiver has a maximum memory for up to 30 pairings, these can be
from the same or any number of transmitters.
Erasing Receivers Memory
1.
Press and hold the receiver Learn Switch for approx 10 seconds.
When the Learn LED turns ON all memory is erased
2.
NOTE: You cannot erase individual Tx encoders
DS-QUANTAFOB-1
QUANTAFOB
Technical specifications
Transmitters: FOBBER Transmitter
Enclosure Rating:
Battery Type:
Battery Life:
Standard IP68
CR2032 (supplied)
2 years @ approx. 50 1/2second presses p/day
90 x 54 x 27 mm
Dimensions:
Changing the Battery: Remove the 2 enclosure screws. replace battery, taking care of contacts and the battery polarity
Electrical Characteristics
Supply Voltage
Min
2.9
Typical
3
Max
3.3
Units
V
Supply Current
17
mA
Frequency:
433.92
MHz
mW
RF Output Power (ERP)
-
10
RF Bandwidth
60
KHz
Receiver Unit
Enclosure Rating:
IP68
Dimensions:
130 x 112 x 42 mm (not including antenna)
Operating Temperature: -10 to +50o Celsius.
Electrical Characteristics
MIN
11
TYPICAL
MAX
DIMENSION
Supply Voltage for
32
12
Vdc or ac
A
Relay Rating* (230Vac) RLY1-4
5
Supply Current :
Quiescent
25
All relays operating*
Time delay from Tx on Switch to Rx Relay operation
140
30
mA
mS
Time delay from Tx sw relax to Rx Relay release
30
mS
*The relay contacts in this unit are for functional use only and must not be used for isolation purposes
DS-QUANTAFOB-1
QUANTAFOB
Mechanical Dimensions
RED Directive
This product meets the requirements of directive 2014/53/EU.
Full declaration is available at:-
https://www.rfsolutions.co.uk/certification-i59
RF Solutions Ltd. Recycling Notice
Meets the following EC Directives:
DO NOT
Waste Batteries and Accumulators
Directive 2006/66/EC
Where batteries are fitted, before recycling the product,
the batteries must be removed and disposed of at a
licensed collection point.
Discard with normal waste, please recycle.
ROHS Directive 2002/95/EC
Environment Agency producer registration number:
WEE/JB0104WV.
Specifies certain limits for hazardous substances.
WEEE Directive 2002/96/EC
Waste electrical & electronic equipment. This product must be disposed of through a licensed WEEE collection point. RF Solutions Ltd., fulfills its WEEE
obligations by membership of an approved compliance scheme.
Disclaimer:
Whilst the information in this document is believed to be correct at the time of issue, RF Solutions Ltd does not accept any liability whatsoever for its accuracy, adequacy or completeness. No express or
implied warranty or representation is given relating to the information contained in this document. RF Solutions Ltd reserves the right to make changes and improvements to the product(s) described
herein without notice. Buyers and other users should determine for themselves the suitability of any such information or products for their own particular requirements or specification(s). RF Solutions
Ltd shall not be liable for any loss or damage caused as a result of user’s own determination of how to deploy or use R F Solutions Ltd’s products. Use of RF Solutions Ltd products or components in life
support and/or safety applications is not authorised except with express written approval. No licences are created, implicitly or otherwise, under any of RF Solutions Ltd’s intellectual property rights.
Liability for loss or damage resulting or caused by reliance on the information contained herein or from the use of the product (including liability resulting from
negligence or where RF Solutions Ltd was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict RF Solutions Ltd’s liability for death or
personal injury resulting from its negligence.
相关型号:
©2020 ICPDF网 联系我们和版权申明