PS9115-F3-AX [RENESAS]
1 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 10 Mbps, LEAD FREE, PLASTIC, SOP-5;
| 型号： | PS9115-F3-AX |
| 厂家： | 
RENESAS TECHNOLOGY CORP |
| 描述： | 1 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 10 Mbps, LEAD FREE, PLASTIC, SOP-5 输出元件 光电 |
| 文件： | 总16页 (文件大小：296K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6.
7.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8.
9.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
DATA SHEET
PHOTOCOUPLER
PS9115
HIGH CMR, 10 Mbps TOTEM POLE OUTPUT TYPE
−NEPOC Series−
5-PIN SOP (SO-5) PHOTOCOUPLER
DESCRIPTION
The PS9115 is an optically coupled high-speed, totem pole output isolator containing a GaAlAs LED on the input
side and a photodiode and a signal processing circuit on the output side on one chip.
The PS9115 is specified high CMR, high CTR and pulse width distortion with operating temperature.
FEATURES
•
•
•
•
•
•
•
•
•
High common mode transient immunity (CMH, CML = 20 kV/μs TYP.)
Small package (SO-5)
PIN CONNECTION
(Top View)
Pulse width distortion (⏐tPHL − tPLH⏐ = 7 ns TYP.)
High-speed (10 Mbps)
5
1
4
3
1. Anode
2. Cathode
3. GND
High isolation voltage (BV = 3 750 Vr.m.s.)
Totem pole output
4. VO
Ordering number of taping product: PS9115-F3, F4: 2 500 pcs/reel
Pb-Free product
5. VCC
2
Safety standards
• UL approved: File No. E72422
• DIN EN60747-5-2 (VDE0884 Part2) approved No. 40008902 (Option)
TRUTH TABLE
APPLICATIONS
•
•
•
Measurement equipment
PDP
LED
ON
Output
L
Line Receiver for FA Network
OFF
H
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PN10267EJ05V0DS (5th edition)
Date Published March 2008 NS
Printed in Japan
2003, 2008
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
PS9115
<R>
PACKAGE DIMENSIONS (UNIT: mm)
+0.3
3.4
–0.1
5
4
3
7.0 0.3
4.4
1
2
0.5 0.3
1.27
0.25 M
+0.10
0.4
–0.05
<R>
MARKING EXAMPLE
SnBi PLATING
Ni/Pd/Au PLATING
Type Number
Type Number
Assembly Lot
*1
9115
N831
9115
N831
Assembly Lot
No. 1 pin Mark
N
No. 1 pin Mark
N
*1
Initial of NEC
Initial of NEC
(Engraved mark)
(Engraved mark)
N
8
31
Week Assembled
N
8
31
Week Assembled
Year Assembled
(Last 1 Digit)
Year Assembled
(Last 1 Digit)
Rank Code
Rank Code
*1 Bar : Pb-Free
*1 Bar : Pb-Free
2
Data Sheet PN10267EJ05V0DS
PS9115
<R>
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Safety Standard
Approval
Application Part
Number*1
PS9115
PS9115-A
Pb-Free
(SnBi)
20 pcs (Tape 20 pcs cut)
Standard products
PS9115
PS9115-F3
PS9115-F4
PS9115-V
PS9115-F3-A
PS9115-F4-A
PS9115-V-A
Embossed Tape 2 500 pcs/reel (UL approved)
20 pcs (Tape 20 pcs cut)
DIN EN60747-5-2
PS9115-V-F3
PS9115-V-F4
PS9115
PS9115-V-F3-A
PS9115-V-F4-A
PS9115-AX
Embossed Tape 2 500 pcs/reel (VDE0884 Part2)
Approved (Option)
Pb-Free
20 pcs (Tape 20 pcs cut)
Standard products
PS9115-F3
PS9115-F4
PS9115-V
PS9115-F3-AX
PS9115-F4-AX
PS9115-V-AX
PS9115-V-F3-AX
PS9115-V-F4-AX
(Ni/Pd/Au)
Embossed Tape 2 500 pcs/reel (UL approved)
20 pcs (Tape 20 pcs cut)
DIN EN60747-5-2
PS9115-V-F3
PS9115-V-F4
Embossed Tape 2 500 pcs/reel (VDE0884 Part2)
Approved (Option)
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
IF
Ratings
Unit
mA
V
Diode
Forward Current*1
Reverse Voltage
30
VR
5
Detector Supply Voltage
Output Voltage
VCC
VO
7
V
7
−5
V
High Level Output Current
IOH
mA
mA
mW
Vr.m.s.
°C
Low Level Output Current
Power Dissipation*2
IOL
13
PC
130
Isolation Voltage*3
BV
TA
3 750
Operating Ambient Temperature
Storage Temperature
−40 to +85
−55 to +125
Tstg
°C
*1 Reduced to 0.3 mA/°C at TA = 25°C or more.
*2 TA = −40 to +85°C, Applies to output pin VO and power supply pin VCC. Reduced to 2.36 mW/°C at TA = 70°C or
more.
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-5 shorted together.
3
Data Sheet PN10267EJ05V0DS
PS9115
RECOMMENDED OPERATING CONDITIONS
Parameter
High Level Input Current
Low Level Input Voltage
Supply Voltage
Symbol
IFH
MIN.
7.5
0
TYP.
5.0
MAX.
12.5
0.8
Unit
mA
V
VFL
VCC
N
4.5
5.5
V
TTL (loads)
3
Operating Ambient Temperature
TA
0
+85
°C
ELECTRICAL CHARACTERISTICS (TA = 0 to +85°C, unless otherwise specified)
Parameter
Symbol
VF
Conditions
IF = 10 mA, TA = 25°C
MIN.
1.4
TYP.*1
1.65
MAX.
1.9
Unit
V
Diode
Forward Voltage
Reverse Current
Terminal Capacitance
IR
VR = 3 V, TA = 25°C
10
μA
pF
μA
V
Ct
V = 0 V, f = 1 MHz, TA = 25°C
VCC = VO = 5.5 V, VF = 0.8 V
VCC = 4.5 V, VF = 0.8 V, IOH = −2 mA
VCC = 4.5 V, IF = 7 mA, IOL = 8 mA
VCC = 5.5 V, IF = 0 mA, VO = open
VCC = 5.5 V, IF = 10 mA, VO = open
30
0.003
3.0
Detector High Level Output Current*2
High Level Output Voltage
Low Level Output Voltage
High Level Supply Current
Low Level Supply Current
IOH
200
VOH
VOL
ICCH
ICCL
IOSH
2.4
0.25
12
0.6
16
16
V
mA
mA
mA
13
High Level Output Short
Circuit Current
VCC = 5.5 V, VO = GND, IF = 0 mA,
10 ms or less
−26
Low Level Output Short
Circuit Current
IOSL
IFHL
VCC = VO = 5.5 V, IF = 8 mA,
10 ms or less
34
mA
mA
Coupled Threshold Input Current
(H → L)
TA = 25°C
2.3
5
6
VCC = 5 V, VO = 0.6 V
Isolation Resistance
RI-O
VI-O = 1 kVDC, RH = 40 to 60%,
1011
Ω
TA = 25°C
Isolation Capacitance
Propagation Delay Time
(H → L)*3
CI-O
tPHL
V = 0 V, f = 1 MHz, TA = 25°C
TA = 25°C
0.6
33
pF
ns
15
10
15
10
65
85
65
85
50
VCC = 5 V, IF = 7.5 mA
TA = 25°C
Propagation Delay Time
(L → H)*3
tPLH
40
ns
VCC = 5 V, IF = 7.5 mA
Pulse Width Distortion
(PWD)*3
⏐tPHL-tPLH⏐ VCC = 5 V, IF = 7.5 mA
7
ns
Common Mode
CMH
CML
VCC = 5 V, TA = 25°C, IF = 0 mA,
VO (MIN.) = 2 V, VCM = 1 kV
10
10
20
kV/μs
Transient Immunity at High
Level Output*4
Common Mode
VCC = 5 V, TA = 25°C, IF = 7.5 mA,
20
kV/μs
Transient Immunity at Low
Level Output*4
VO (MAX.) = 0.8 V, VCM = 1 kV
4
Data Sheet PN10267EJ05V0DS
PS9115
*1 Typical values at TA = 25°C
*2 Because a high-level output current (IOH) of 300 μA or more may be output when the temperature is 0°C or less
and when VCC is around 3 to 4 V, it is important to confirm the characteristics (operation with the power supply
on and off) during design, before using this device.
*3 Test circuit for propagation delay time
VCC = 5 V
VCC = 5 V
I
F
(ON)
(ON)
Pulse input (I
F
)
Input
VO
(monitor)
50% I
F
1.3 kΩ
(PW = 500 ns,
Duty cycle = 1/2)
0.1
μ
F
V
OH
Output
Input
(monitor)
C
30 pF
L
=
2.5 kΩ
1.5 V
VOL
47 Ω
tPHL
t
PLH
CL includes probe and stray wiring capacitance.
*4 Test circuit for common mode transient immunity
1 kV
0 V
SW I
F
90%
10%
VCM
V
CC = 5 V
0.1 μF
V
O
(Monitor)
tr
tf
CL = 15 pF
VO
V
OH
(IF = 0 mA)
2 V
VCM
0.8 V
V
O
VOL
(IF = 7.5 mA)
CL includes probe and stray wiring capacitance.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of 0.1 μF is used between VCC and GND near device. Also, ensure that the distance between
the leads of the photocoupler and capacitor is no more than 10 mm.
3. Avoid storage at a high temperature and high humidity.
5
Data Sheet PN10267EJ05V0DS
PS9115
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
MAXIMUM FORWARD CURRENT
vs. AMBIENT TEMPERATURE
DETECTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
40
30
20
10
150
100
50
0
0
20
40
60
8085
100
20
40
60
8085
100
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
SUPPLY CURRENT vs.
AMBIENT TEMPERATURE
FORWARD CURRENT vs.
FORWARD VOLTAGE
100
10
20
16
VCC = 5.5 V
ICCL (IF = 10 mA)
ICCH (IF = 0 mA)
TA = +85˚C
+50˚C
+25˚C
0˚C
12
8
1
0.1
–25˚C
4
0
0.01
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
–50
–25
0
25
50
75
100
Forward Voltage VF (V)
Ambient Temperature TA (˚C)
PROPAGATION DELAY TIME,
PULSE WIDTH DISTORTION
vs. AMBIENT TEMPERATURE
HIGH LEVEL OUTPUT VOLTAGE vs.
AMBIENT TEMPERATURE
5
4
50
40
VCC = 4.5 V,
VF = 0.8 V,
IOH = 2.0 mA
tPLH
IF = 7.5 mA
VCC = 5.0 V
tPHL
3
2
30
20
1
0
10
0
PWD
–50
–25
0
25
50
75
100
–50
–25
0
25
50
75
100
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
Remark The graphs indicate nominal characteristics.
6
Data Sheet PN10267EJ05V0DS
PS9115
LOW LEVEL OUTPUT VOLTAGE vs.
AMBIENT TEMPERATURE
THRESHOLD INPUT CURRENT vs.
AMBIENT TEMPERATURE
0.5
0.4
5
4
3
2
1
0
V
CC = 4.5 V,
= 7.5 mA,
V
CC = 5.0 V
I
I
F
OL = 8.0 mA
0.3
0.2
0.1
0
–50
–25
0
25
50
75
100
–50
–25
0
25
50
75
(˚C)
100
Ambient Temperature T
A
(˚C)
Ambient Temperature T
A
HIGH LEVEL OUTPUT VOLTAGE vs.
HIGH LEVEL OUTPUT CURRENT
LOW LEVEL OUTPUT VOLTAGE vs.
LOW LEVEL OUTPUT CURRENT
5
4
0.5
0.4
V
V
CC = 4.5 V,
= 0.8 V
V
CC = 4.5 V,
= 5.0 mA
TA
= 85˚C
25˚C
F
I
F
T
A
= 85˚C
0˚C
0˚C
25˚C
3
2
0.3
0.2
1
0
0.1
0
2.5
5
7.5
10
12.5 13
–1
–2
–3
–4
–5
Low Level Output Current IOL (mA)
High Level Output Current IOH (mA)
PROPAGATION DELAY TIME,
PULSE WIDTH DISTORTION
vs. FORWARD CURRENT
HIGH LEVEL OUTPUT VOLTAGE vs.
HIGH LEVEL OUTPUT CURRENT
4
3
2
1
60
40
20
T = 25˚C,
A
V
CC = 4.5 V,
TA
= 85˚C
25˚C
0˚C
V
CC = 5 V
I
F
= 250
μA
t
PHL
PLH
t
PWD
0
–5
–10 –15 –20 –25 –30 –35
0
5
10
15
20
(mA)
25
30
High Level Output Current IOH (mA)
Forward Current I
F
Remark The graphs indicate nominal characteristics.
7
Data Sheet PN10267EJ05V0DS
PS9115
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Tape)
2.0 0.05
4.0 0.1
+0.1
–0
3.45 MAX.
1.5
1.55 0.1
3.0 0.1
3.9 0.1
8.0 0.1
0.3 0.05
Tape Direction
PS9115-F4
PS9115-F3
Outline and Dimensions (Reel)
2.0 0.5
2.0 0.5
13.0 0.2
R 1.0
φ
φ
φ
21.0 0.8
13.5 1.0
17.5 1.0
11.9 to 15.4
Outer edge of
flange
Packing: 2 500 pcs/reel
8
Data Sheet PN10267EJ05V0DS
PS9115
<R>
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
1.45
5.5
9
Data Sheet PN10267EJ05V0DS
PS9115
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
10 seconds or less
• Time of peak reflow temperature
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C 120 30 s
• Number of reflows
• Flux
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260˚C MAX.
220˚C
to 60 s
180˚C
120˚C
120 30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
• Time
260°C or below (molten solder temperature)
10 seconds or less
• Preheating conditions
• Number of times
• Flux
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature) 350°C or below
• Time (each pins)
• Flux
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100°C
10
Data Sheet PN10267EJ05V0DS
PS9115
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
11
Data Sheet PN10267EJ05V0DS
PS9115
<R>
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Speck
Unit
Application classification (DIN EN 60664-1 VDE0110 Part 1)
for rated line voltages ≤ 300 Vr.m.s.
for rated line voltages ≤ 600 Vr.m.s.
IV
III
Climatic test class (DIN EN 60664-1 VDE0110)
40/85/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.5 × UIORM, Pd < 5 pC
UIORM
707
Vpeak
Upr
1 061
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr
1 326
Vpeak
Vpeak
Upr = 1.875 × UIORM, Pd < 5 pC
Highest permissible overvoltage
UTR
6 000
2
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
Clearance distance
>4.2
mm
mm
Creepage distance
>4.2
Comparative tracking index (DIN IEC 112/VDE 0303 Part 1)
Material group (DIN EN 60664-1 VDE0110 Part 1)
Storage temperature range
CTI
175
III a
Tstg
TA
–55 to +125
–40 to +85
°C
°C
Operating temperature range
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
Ris MIN.
Ris MIN.
1012
1011
Ω
Ω
VIO = 500 V dc at TA MAX. at least 100°C
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Tsi
Isi
150
200
300
°C
mA
mW
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
Psi
VIO = 500 V dc at TA = Tsi
Ris MIN.
109
Ω
12
Data Sheet PN10267EJ05V0DS
PS9115
•
The information in this document is current as of March, 2008. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or
data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all
products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
•
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
•
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2)
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
13
Data Sheet PN10267EJ05V0DS
PS9115
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
Caution GaAs Products
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
相关型号：
©2020 ICPDF网 联系我们和版权申明