M35076 [RENESAS]
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS; 屏幕字符和模式显示控制器型号: | M35076 |
厂家: | RENESAS TECHNOLOGY CORP |
描述: | SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS |
文件: | 总46页 (文件大小:516K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
To all our customers
Regarding the change of names mentioned in the document, such as Mitsubishi
Electric and Mitsubishi XX, to Renesas Technology Corp.
The semiconductor operations of Hitachi and Mitsubishi Electric were transferred to Renesas
Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog
and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.)
Accordingly, although Mitsubishi Electric, Mitsubishi Electric Corporation, Mitsubishi
Semiconductors, and other Mitsubishi brand names are mentioned in the document, these names
have in fact all been changed to Renesas Technology Corp. Thank you for your understanding.
Except for our corporate trademark, logo and corporate statement, no changes whatsoever have been
made to the contents of the document, and these changes do not constitute any alteration to the
contents of the document itself.
Note : Mitsubishi Electric will continue the business operations of high frequency & optical devices
and power devices.
Renesas Technology Corp.
Customer Support Dept.
April 1, 2003
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
DESCRIPTION
PIN CONFIGURATION (TOP VIEW)
The M35076-XXXSP is a character pattern display control IC can
display on the digital camera, the digital video, the digital televi-
sion, the CRT display, the liquid crystal display and the plasma
display. It can display 2 pages ( 24 characters × 12 lines per 1
page) at the same time. It uses a silicon gate CMOS process and
it housed in a 20-pin shrink DIP package (M35076-XXXSP).
For M35076-001SP that is a standard ROM version of M35076-
XXXSP respectively, the character pattern is also mentioned.
←
CPOUT
1
2
20
19
18
17
16
15
14
13
12
11
VDD2
←
←
→
→
→
→
→
→
V
SS2
AC
CS
VERT
→
→
→
↔
→
3
HOR
4
P5/B0
P4/G1
P3/G0
P2/R1
P1/R0
P0/BLNK0
SCK/SCL
SIN/SDA
TCK
5
6
7
V
DD1
8
FEATURES
←
←
P6/B1
9
Screen composition ................ 24 characters × 12 lines × 2 pages
•
P7/BLNK1
10
VSS1
Number of characters displayed.................. 288 (Max.) × 2 pages
•
Character composition .....................................12 ✕✕18 dot matrix
•
•
Characters available.................................. 0 page:256 characters
Outline 20P4B
1 page:256 characters
Character sizes available ....................4 (vertical) ✕✕2 (horizontal)
•
•
Display locations available
Horizontal direction .............................................. 2007 locations
Vertical direction .................................................. 1023 locations
Blinking .................................................................. Character units
•
Cycle : division of vertical synchronization signal into 32 or 64
Duty : 25%, 50%, or 75%
Data input .................................. By the 16-bit serial input function
................ By the I2C-BUS serial input function(at VDD=5V only)
•
Coloring for ROM character
•
Character color .....................................8 colors (Character unit)
Background coloring .............................8 colors (Character unit)
Border (shadow) coloring ........................ 8 colors (RGB output)
Specified by register
Raster coloring ........................................ 8 colors (RGB output)
Specified by register
Blanking
Character size blanking
Border size blanking
•
•
Matrix-outline blanking
All blanking (all raster area)
Output ports
8 shared output ports (toggled between RGB output)
Display RAM erase function
•
•
Display oscillation stop function
<VDD=5V>
Display input frequency range
•
External clock mode 1 ..................... FOSC = 6.3 MHz to 80.0 MHz
External clock mode 2 ................. FOSC = 20.0 MHz to 110.0 MHz
Internal clock mode ..................... FOSC = 20.0 MHz to 110.0 MHz
Horizontal synchronous input frequency
•
........................................................ H.sync = 15 kHz to 130 kHz
<VDD=3V>
Display input frequency range
•
External clock mode 1 ........................ FOSC = 6.3 MHz to 40 MHz
Horizontal synchronous input frequency
•
.......................................................... H.sync = 15 kHz to 60 kHz
APPLICATION
Digital camera, Digital video, Digital television, CRT display, Liquid
crystal display, Plasma display
Rev.1.0
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
PIN DESCRIPTION
Pin
Number
Input/
Output
Symbol
Pin name
Function
1
CPOUT
VSS2
__
Filter output
Output Filter output. Connect loop filter to this pin.
2
3
4
Earthing pin
–
Connect to GND.
AC
__
CS
Auto-clear input
Chip select input
Input
Input
When “L”, this pin resets the internal IC circuit. Hysteresis input. Built-in pull-up resistor.
<at the 16-bit serial communication>
Chip select pin. Set this pin to "L" level at serial data transfer. Hysteresis input. Built-in
pull-up resistor.
<at the I2C-BUS serial communication>
Set this pin to “H” level.
5
6
SCK/SCL Clock input
Input
<at the 16-bit serial communication>
SIN pin serial data is taken in when SCK rises at CS pin "L" level. Hysteresis input.
_____
<at the I2C-BUS serial communication>
SDA pin serial data is taken in synchronized with SCL.
SIN/SDA
Data input
Data I/O
Input
I/O
<at the 16-bit serial communication>
This is the pin for serial input of display control register and display RAM data. Hysteresis
input.
<at the I2C-BUS serial communication>
Hysteresis input. This is the pin for serial input of display control register and display
RAM data. Also this pin output acknowledge signal.
7
TCK
External clock
Power pin
Input
This is the pin for external clock input.
8
VDD1
P6/B1
–
Please connect to +5V with the power pin.
9
Port P6 output
Output This pin can be toggled between port pin output and B1 signal output.
Output This pin can be toggled between port pin output and BLNK1 signal output.
10
11
12
13
14
15
16
17
18
P7/BLNK1 Port P7 output
VSS1 Earthing pin
P0/BLNK0 Port P0 output
–
Please connect to GND using circuit earthing pin.
Output This pin can be toggled between port pin output and BLNK0 signal output.
Output This pin can be toggled between port pin output and R0 signal output.
Output This pin can be toggled between port pin output and R1 signal output.
Output This pin can be toggled between port pin output and G0 signal output.
Output This pin can be toggled between port pin output and G1 signal output.
Output This pin can be toggled between port pin output and B0 signal output.
P1/R0
P2/R1
P3/G0
P4/G1
P5/B0
HOR
Port P1 output
Port P2 output
Port P3 output
Port P4 output
Port P5 output
Horizontal synchro-
nous signal input
Input
Input
–
This pin inputs the horizontal synchronous signal. Hysteresis input.
This pin inputs the vertical synchronous signal. Hysteresis input.
Please connect to +5V with the power pin.
19
20
VERT
VDD2
Vertical synchro-
nous signal input
Power pin
2
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
Polarity switching circuit
Input control circuit
3
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
MEMORY CONSTITUTION
pages : page 0 memory and page 1 memory (their addresses are
common), page controlled by DAF bit of each address when writing
data. For detail, see “Data input”. Memory constitution is shown in
Figure 1 and 2.
Address 00016 to 11F16 are assigned to the display RAM, address
12016 to 12816 are assigned to the display control registers. The in-
ternal circuit is reset and all display control registers (address 12016
__
to 12816) are set to “0” when the AC pin level is “L”. And then, RAM
is not erased and be undefinited. This memory is consisted of 2
Addresses
00016
DAF
DAE DAD DAC DAB DAA
DA9
G
DA8
R
DA7
C7
DA6
C6
DA5
C5
DA4
C4
DA3
C3
DA2
C2
DA1
C1
DA0
C0
0
0
BB
BB
BG
BG
BR BLINK
BR BLINK
B
B
00116
G
R
C7
C6
C5
C4
C3
C2
C1
C0
Background
coloring
Blink-
ing
Character code
Character color
11E16
11F16
12016
12116
12216
12316
12416
12516
12616
12716
12816
0
0
0
0
0
0
0
0
0
0
0
BB
BB
BG
BG
BR BLINK
BR BLINK
B
B
G
G
R
R
C7
C7
C6
C6
C5
C5
C4
C4
C3
C3
C2
C2
C1
C1
C0
C0
EXCK0 DISV2 DIVS1 DIVS0 DIV10 DIV9 DIV8 DIV7 DIV6 DIV5 DIV4 DIV3 DIV2 DIV1 DIV0
RSEL0 PTD7 PTD6 PTD5 PTD4 PTD3 PTD2 PTD1 PTD0 PTC5 PTC4 PTC3 PTC2 PTC1 PTC0
RSEL1 SPACE2 SPACE1 SPACE0 HP10 HP9
EXCK1 TEST3 TEST2 TEST1 TEST0 VP9
HP8
VP8
HP7
VP7
HP6
VP6
HP5
VP5
HP4
VP4
HP3
VP3
HP2
VP2
HP1
VP1
HP0
VP0
TEST9 PTC67 TEST4 DSP11 DSP10 DSP9 DSP8 DSP7 DSP6 DSP5 DSP4 DSP3 DSP2 DSP1 DSP0
TEST10 VSZ1H1 VSZ1H0 VSZ1L1 VSZ1L0 V1SZ1 V1SZ0 LIN9 LIN8 LIN7 LIN6 LIN5 LIN4 LIN3 LIN2
POPUP VSZ2H1 VSZ2H0 VSZ2L1 VSZ2L0 V18SZ1 V18SZ0 LIN17 LIN16 LIN15 LIN14 LIN13 LIN12 LIN11 LIN10
MODE0 TEST12 HSZ20 TEST11 HSZ10 BETA14 TEST8 TEST7 TEST6 FB
FG
FR
RB
RG
RR
___
MODE1 BLINK2 BLINK1 BLINK0 DSPON STOP RAMERS SYAD BLK1 BLK0 POLH POLV VMASK B/F BCOL
Fig. 1 Memory constitution (page 0 memory)
4
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
Addresses DAF
DAE DAD DAC DAB DAA
DA9
G
DA8
R
DA7
C7
DA6
C6
DA5
C5
DA4
C4
DA3
C3
DA2
C2
DA1
C1
DA0
C0
00016
00116
1
1
BB
BB
BG
BG
BR BLINK
BR BLINK
B
B
G
R
C7
C6
C5
C4
C3
C2
C1
C0
Background
coloring
Blink-
ing
Character code
Character color
11E16
11F16
12016
12116
12216
12316
12416
12516
12616
12716
12816
1
1
1
1
1
1
1
1
1
1
1
BB
BB
–
BG
BG
–
BR BLINK
BR BLINK
B
B
–
–
G
G
–
R
R
C7
C7
–
C6
C6
–
C5
C5
–
C4
C4
–
C3
C3
–
C2
C2
–
C1
C1
–
C0
C0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
SPACE2 SPACE1 SPACE0 HP10 HP9
TEST3 VJT TEST1 TEST0 VP9
HP8
VP8
HP7
VP7
HP6
VP6
HP5
VP5
HP4
VP4
HP3
VP3
HP2
VP2
HP1
VP1
HP0
VP0
–
–
–
TEST4 DSP11 DSP10 DSP9 DSP8 DSP7 DSP6 DSP5 DSP4 DSP3 DSP2 DSP1 DSP0
–
VSZ1H1 VSZ1H0 VSZ1L1 VSZ1L0 V1SZ1 V1SZ0 LIN9 LIN8 LIN7 LIN6 LIN5 LIN4 LIN3 LIN2
VSZ2H1 VSZ2H0 VSZ2L1 VSZ2L0 V18SZ1 V18SZ0 LIN17 LIN16 LIN15 LIN14 LIN13 LIN12 LIN11 LIN10
–
–
TEST12 HSZ20 TEST11 HSZ10 BETA14 TEST8 TEST7 TEST6 FB
BLINK2 BLINK1 BLINK0 DSPON TEST13 RAMERS SYAD BLK1 BLK0
FG
FR
RB
RG
RR
–
–
–
–
–
BCOL
Fig. 2 Memory constitution (page 1 memory)
Note: Page 0 and page 1 registers are found in their respective pages. For example, HP10 to HP0 of the page 0 memory sets the horizontal
display start position of page 0, whereas HP10 to HP0 (same register name) of the page 1 memory sets the horizontal display start
position of page 1. Also, registers common to both page 0 and page 1 are found only in the page 0 memory. For example, PTC0 is the
control register of the P0 pin and is found only in the page 0 memory.
5
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
SCREEN CONSTITUTION
The screen lines and rows are determined from each address of
the display RAM (page 0 and page 1 are common). The screen
constitution is shown in Figure 3.
Row
Line
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
1
00016 00116 00216 00316 00416 00516 00616 00716 00816 00916 00A16 00B16 00C16 00D16 00E16 00F16 01016 01116 01216 01316 01416 01516 01616 01716
01816 01916 01A16 01B16 01C16 01D16 01E16 01F16 02016 02116 02216 02316 02416 02516 02616 02716 02816 02916 02A16 02B16 02C16 02D16 02E16 02F16
03016 03116 03216 03316 03416 03516 03616 03716 03816 03916 03A16 03B16 03C16 03D16 03E16 03F16 04016 04116 04216 04316 04416 04516 04616 04716
04816 04916 04A16 04B16 04C16 04D16 04E16 04F16 05016 05116 05216 05316 05416 05516 05616 05716 05816 05916 05A16 05B16 05C16 05D16 05E16 05F16
06016 06116 06216 06316 06416 06516 06616 06716 06816 06916 06A16 06B16 06C16 06D16 06E16 06F16 07016 07116 07216 07316 07416 07516 07616 07716
07816 07916 07A16 07B16 07C16 07D16 07E16 07F16 08016 08116 08216 08316 08416 08516 08616 08716 08816 08916 08A16 08B16 08C16 08D16 08E16 08F16
09016 09116 09216 09316 09416 09516 09616 09716 09816 09916 09A16 09B16 09C16 09D16 09E16 09F16 0A016 0A116 0A216 0A316 0A416 0A516 0A616 0A716
0A816 0A916 0AA16 0AB16 0AC16 0AD16 0AE16 0AF16 0B016 0B116 0B216 0B316 0B416 0B516 0B616 0B716 0B816 0B916 0BA16 0BB16 0BC16 0BD16 0BE16 0BF16
0C016 0C116 0C216 0C316 0C416 0C516 0C616 0C716 0C816 0C916 0CA16 0CB16 0CC16 0CD16 0CE16 0CF16 0D016 0D116 0D216 0D316 0D416 0D516 0D616 0D716
0D816 0D916 0DA16 0DB16 0DC16 0DD16 0DE16 0DF16 0E016 0E116 0E216 0E316 0E416 0E516 0E616 0E716 0E816 0E916 0EA16 0EB16 0EC16 0ED16 0EE16 0EF16
0F016 0F116 0F216 0F316 0F416 0F516 0F616 0F716 0F816 0F916 0FA16 0FB16 0FC16 0FD16 0FE16 0FF16 10016 10116 10216 10316 10416 10516 10616 10716
10816 10916 10A16 10B16 10C16 10D16 10E16 10F16 11016 11116 11216 11316 11416 11516 11616 11716 11816 11916 11A16 11B16 11C16 11D16 11E16 11F16
2
3
4
5
6
7
8
9
10
11
12
* The hexadecimal numbers in the boxes show the display RAM address.
Fig. 3 Screen constitution
6
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
DISPLAY RAM
Address 00016 to 11F16
Contents
Register
C0
Remarks
DA
0
Status
Function
0
1
Set the displayed ROM character code.
Set display character
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
To write data into page 0 (Note 2), select the data from the ROM
characters (256 types) for page 0 and set the character code. To
write data into page 1, do the same from the ROM characters (256
types) for page 1.
1
C1
2
C2
3
C3
4
C4
5
C5
6
C6
7
C7
G
0
0
1
1
0
0
1
1
B
0
0
0
0
1
1
1
1
R
0
1
0
1
0
1
0
1
Color
Black
Red
Set character color (character unit)
8
R
Green
Yellow
Blue
9
G
Magenta
Cyan
A
B
C
D
E
B
White
Set blinking
See register BLINK2 to BLINK0 (ad-
dress12816)
Do not blink.
Blinking
BLINK
BR
BG
BB
BB
0
BG
BR
0
Color
Black
Red
Set character background
(character unit)
0
0
1
1
0
0
1
1
0
1
0
0
Green
Yellow
Blue
0
1
1
0
1
1
Magenta
Cyan
1
0
1
1
White
____
Notes 1. The display RAM is undefined state at the AC pin.
2. The display RAM consists of 2 pages, page 0 and page 1 (common address). The page in which data is written is controlled by the
DAF bit. When set to "0", data is written into page 0, whereas when set to "1", data is written into page 1.
7
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
REGISTERS DESCRIPTION
(1) Address 12016
Contents
Register
Remarks
DA
0
Status
0
Function
Set display frequency by division value
(multiply value) setting.
Set division value (multiply value) of horizontal oscillation frequency.
DIV0
(Note 3)
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
For details, see REGISTER SUPPLE-
MENTARY DESCRIPTION (1).
10
DIV1
1
2
3
4
5
6
7
8
9
A
B
C
D
n
N1 =
(DIVn × 2 )
Σ
(Note 3)
Also, set the display frequency range by
registers DIVS0, DIVS1(address
12016), RSEL0(address 12116) and
RSEL1(address 12216) in accordance
with the display frequency.
n = 0
N1 : division value (multiply value)
DIV2
(Note 3)
DIV3
(Note 3)
Any of this settings above is required
only when EXCK1 = 0, EXCK0 = 1 and
EXCK1 = 1, EXCK0 = 1.
DIV4
(Note 3)
DIV5
(Note 3)
DIV6
(Note 3)
DIV7
(Note 3)
DIV8
(Note 3)
DIV9
(Note 3)
DIV10
(Note 3)
For setting, see REGISTER SUPPLEMENTARY DESCRIPTION
(2).
Set display frequency range.
DIVS0
(Note 3)
DIVS1
(Note 3)
DISV2
(Note 3)
EXCK1 EXCK0
Display clock input
External clock mode 1
Internal clock mode
Do not set
Display clock setting
See REGISTER SUPPLEMENTARY
DESCRIPTION (1)
0
1
0
0
1
1
0
1
0
1
E
EXCK0
(Note 3)
EXCK1 : address12316
External clock mode 2
____
Notes 1. The mark
around the status value means the reset status by the "L" level is input to AC pin.
2. The page in which data is written is controlled by the DAF bit. When set to "0", data is written into page 0, whereas when set to "1",
data is written into page 1.
3. Registers marked with (Note 3) are found only in page 0, therefore the register value does not change when the DAF bit is set to "1".
8
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
(2) Address 12116
Contents
Function
Register
DA
0
Remarks
Status
0
P0 output (port P0).
BLNK0 output.
PTC0
P0 pin output control.
P1 pin output control.
P2 pin output control.
P3 pin output control.
P4 pin output control.
P5 pin output control.
P0 pin data control.
P1 pin data control.
P2 pin data control.
P3 pin data control.
P4 pin data control.
P5 pin data control.
P6 pin data control.
P7 pin data control.
Set display frequency range.
(Note 3)
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
P1 output (port P1).
R0 signal output.
P2 output (port P2).
R1 signal output.
P3 output (port P3).
G0 signal output.
P4 output (port P4).
G1 signal output.
P5 output (port P5).
B0 signal output.
PTC1
1
2
3
4
5
6
7
8
9
A
B
C
D
E
(Note 3)
PTC2
(Note 3)
PTC3
(Note 3)
PTC4
(Note 3)
PTC5
(Note 3)
“L” output or negative polarity output (BLNK0 output).
“H” output or positive polarity output (BLNK0 output).
“L” output or negative polarity output (R0 signal output).
“H” output or positive polarity output (R0 signal output).
“L” output or negative polarity output (R1 signal output).
“H” output or positive polarity output (R1 signal output).
“L” output or negative polarity output (G0 signal output).
“H” output or positive polarity output (G0 signal output).
“L” output or negative polarity output (G1 signal output).
“H” output or positive polarity output (G1 signal output).
“L” output or negative polarity output (B0 signal output).
“H” output or positive polarity output (B0 signal output).
“L” output or negative polarity output (B1 signal output).
“H” output or positive polarity output (B1 signal output).
“L” output or negative polarity output (BLNK1 signal output).
“H” output or positive polarity output (BLNK1 signal output).
PTD0
(Note 3)
PTD1
(Note 3)
PTD2
(Note 3)
PTD3
(Note 3)
PTD4
(Note 3)
PTD5
(Note 3)
PTD6
(Note 3)
PTD7
(Note 3)
For setting, see REGISTER SUPPLYMENTARY DESCRIPTION
(2).
RSEL0
(Note 3)
____
Notes 1. The mark
around the status value means the reset status by the "L" level is input to AC pin.
2. The page in which data is written is controlled by the DAF bit. When set to "0", data is written into page 0, whereas when set to "1",
data is written into page 1.
3. Registers marked with (Note 3) are found only in page 0, therefore the register value does not change when the DAF bit is set to "1".
9
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
(3) Address 12216
Contents
Function
DA
0
Register
HP0
Remarks
Status
0
If HS is the horizontal display start location,
Horizontal display start location is
specified using the 11 bits from HP10
to HP0.
HP10 to HP0 = (000000000002) and
(000001001112) setting is forbidden.
10
n
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
HS = T × 2 HPn + 6)
(Σ
n = 0
T : Period of display frequency
1
2
3
4
5
6
7
8
9
A
B
C
D
E
HP1
HP2
2007 settings are possible.
HOR
HP3
VS
Note 4
HP4
HS
OSD Display area
Note 4
Note 4
HP5
Note 4
HS* (shown left) shows horizontal
display start location that is register B/F
(address 12816) = 0 is set.
__
Monitor Screen
HP6
HP7
HP8
HP9
HP10
SPACE0
SPACE1
SPACE2
SPACE
Leave one line worth of space in the ver-
tical direction.
For example, 6 (S) 6 indicates two sets
of 6 lines with a line of spaces between
lines 6 and 7.
A line is 18 × N horizontal scan lines.
N is determined by the character size in
the vertical direction
Number of Lines and Space
<(S) represents space>
2
0
0
0
0
1
1
1
1
1
0
0
1
1
0
0
1
1
0
0
1
0
1
0
1
0
1
12
1 (S) 10 (S) 1
2 (S) 8 (S) 2
3 (S) 6 (S) 3
4 (S) 4 (S) 4
5 (S) 2 (S) 5
6 (S) 6
6 (S)(S) 6
(S) represents one line worth of spac
Set display frequency range.
For setting, see REGISTER SUPPLEMENTARY DESCRIPTION
(2).
RSEL1
(Note 3)
____
Notes 1. The mark
around the status value means the reset status by the "L" level is input to AC pin.
2. The page in which data is written is controlled by the DAF bit. When set to "0", data is written into page 0, whereas when set to "1",
data is written into page 1.
3. Registers marked with (Note 3) are found only in page 0, therefore the register value does not change when the DAF bit is set to "1".
4. Set up the horizontal and vertical display start location so that display range may not exceed it.
Set the character code "FF16" (blank without background) for the display RAM of the part which the display range exceeds.
10
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
(4) Address 12316
Contents
Function
DA
0
Register
VP0
Remarks
Status
0
If VS is the vertical display start location,
The vertical start location is specified
using the 10 bits from VP9 to VP0.
VP9 to VP0 = (00000000002) setting is
forbidden.
9
n
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
VS = H × 2 VPn
Σ
n = 0
H: Cycle with the horizontal synchronizing pulse
VP1
VP2
1
2
3
4
5
6
7
8
9
A
B
C
D
E
1023 settings are possible.
HOR
VP3
VS
Note 4
VP4
HS
OSD Display area
Note 4
Note 4
VP5
HS* (shown left) shows horizontal
display start location that is register B/F
(address 12816) = 0 is set.
__
Note 4
Monitor Screen
VP6
VP7
VP8
VP9
It should be fixed to “0”.
Can not be used.
TEST0
TEST1
VJT
It should be fixed to “0”.
Can not be used.
It should be fixed to “0”.
Can not be used.
It should be fixed to “0”.
Can not be used.
TEST3
Display clock setting
For setting, see Register EXCK0 (address 12016).
EXCK1
(Note 3)
____
Notes 1. The mark
around the status value means the reset status by the "L" level is input to AC pin.
2. The page in which data is written is controlled by the DAF bit. When set to "0", data is written into page 0, whereas when set to "1",
data is written into page 1.
3. Registers marked with (Note 3) are found only in page 0, therefore the register value does not change when the DAF bit is set to "1".
4. Set up the horizontal and vertical display start location so that display range may not exceed it.
Set the character code "FF16" (blank without background) for the display RAM of the part which the display range exceeds.
11
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
(5) Address 12416
Contents
Function
DA
0
Register
DSP0
Remarks
Status
0
The display mode (blanking mode) for line n on the display
screen is set line-by-line, using DSPn (n = 0 to 11).
Sets the display mode of line 1.
Sets the display mode of line 2.
Sets the display mode of line 3.
Sets the display mode of line 4.
Sets the display mode of line 5.
Sets the display mode of line 6.
Sets the display mode of line 7.
Sets the display mode of line 8.
Sets the display mode of line 9.
Sets the display mode of line 10.
Sets the display mode of line 11.
Sets the display mode of line 12.
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
The display mode is determined by the combination of registers
BLK1 and BLK0 (address 12816). Settings are given below.
1
2
3
4
5
6
7
8
9
A
B
C
D
E
DSP1
DSP2
DSP3
DSP4
DSP5
DSP6
DSP7
DSP8
DSP9
DSP10
DSP11
TEST4
DSPn= “0”
Matrix-outline border
Character
DSPn= “1”
Matrix-outline
Border
BLK1
BLK0
0
0
1
1
0
1
0
1
Border
Matrix-outline
Character
Matrix-outline
(At register BCOL = “0”)
For detail, see DISPLAY FORM1(1).
It should be fixed to “0”.
Can not be used.
P6 output (port P6) and P7 output (port P7).
B1 output and BLNK output.
P6 pin and P7 pin output control.
PTC67
(Note 3)
Set to “0” in internal clock mode.
Set to “1” in external clock mode.
TEST9
(Note 3)
____
Notes 1. The mark
around the status value means the reset status by the "L" level is input to AC pin.
2. The page in which data is written is controlled by the DAF bit. When set to "0", data is written into page 0, whereas when set to "1",
data is written into page 1.
3. Registers marked with (Note 3) are found only in page 0, therefore the register value does not change when the DAF bit is set to "1".
12
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
(6) Address 12516
Contents
DA
0
Register
LIN2
Remarks
Function
Status
0
Character size setting in the vertical
direction for the 2nd line.
The vertical dot size for line n in the character dot lines (18 vertical
lines) is set using LINn (n = 2 to 17).
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Character size setting in the vertical
direction for the 3rd line.
Dot size can be selected between 2 types for each dot line.
1
2
3
4
5
6
7
8
9
A
B
C
D
E
LIN3
LIN4
For dot size, see the below registers. Line 1 and lines 2 to 12 can
be set independent of one another.
Character size setting in the vertical
direction for the 4th line.
LINn = “0”
LINn = “1”
Refer to VSZ1L0 Refer to VSZ1H0
and VSZ1L1 and VSZ1H1
1st line
Character size setting in the vertical
direction for the 5th line.
LIN5
Refer to VSZ2L0 Refer to VSZ2H0
2nd to 12th
line
and VSZ2L1
and VSZ2H1
Character size setting in the vertical
direction for the 6th line.
LIN6
Character size setting in the vertical
direction for the 7th line.
LIN7
Character size setting in the vertical
direction for the 8th line.
LIN8
Character size setting in the vertical
direction for the 9th line.
LIN9
H: Cycle with the horizontal synchronizing pulse
V1SZ1 V1SZ0 Vertical direction size
Character size setting in the vertical
direction for the 1st line.
(display monitor 1 to 12 line)
V1SZ0
V1SZ1
VSZ1L0
VSZ1L1
VSZ1H0
VSZ1H1
0
0
1
1
0
1
0
1
1H/dot
2H/dot
3H/dot
4H/dot
H: Cycle with the horizontal synchronizing pulse
VSZ1L1 VSZ1L0 Vertical direction size
Character size setting in the vertical
direction (display monitor 1 line) at “0”
state in register LIN2 to LIN17
(address 12516, 12616).
0
0
1
1
0
1
0
1
1H/dot
2H/dot
3H/dot
4H/dot
H: Cycle with the horizontal synchronizing pulse
VSZ1H1 VSZ1H0 Vertical direction size
Character size setting in the vertical
direction (display monitor 1 line) at “1”
state in register LIN2 to LIN17
(address 12516, 12616).
0
0
1
1
0
1
0
1
1H/dot
2H/dot
3H/dot
4H/dot
It should be fixed to “0”.
Can not be used.
TEST10
(Note 3)
____
Notes 1. The mark
around the status value means the reset status by the "L" level is input to AC pin.
2. The page in which data is written is controlled by the DAF bit. When set to "0", data is written into page 0, whereas when set to "1",
data is written into page 1.
3. Registers marked with (Note 3) are found only in page 0, therefore the register value does not change when the DAF bit is set to "1".
13
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
(7) Address 12616
Contents
DA
0
Register
LIN10
Remarks
Function
Status
0
Character size setting in the vertical
direction for the 10th line.
The vertical dot size for line n in the character dot lines (18 vertical
lines) is set using LINn (n = 2 to 17).
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Character size setting in the vertical
direction for the 11th line.
1
2
3
4
5
6
7
8
9
A
B
C
D
E
LIN11
LIN12
Dot size can be selected between 2 types for each dot line.
For dot size, see the below registers. Line 1 and lines 2 to 12 can
be set independent of one another.
Character size setting in the vertical
direction for the 12th line.
LINn = “0”
LINn = “1”
Character size setting in the vertical
direction for the 13th line.
Refer to VSZ1L0 Refer to VSZ1H0
and VSZ1L1 and VSZ1H1
LIN13
1st line
Refer to VSZ2L0 Refer to VSZ2H0
2nd to 12th
line
and VSZ2L1
and VSZ2H1
Character size setting in the vertical
direction for the 14th line.
LIN14
Character size setting in the vertical
direction for the 15th line.
LIN15
Character size setting in the vertical
direction for the 16th line.
LIN16
Character size setting in the vertical
direction for the 17th line.
LIN17
H: Cycle with the horizontal synchronizing pulse
V18SZ1 V18SZ0 Vertical direction size
Character size setting in the vertical
direction for the 18th line.
(display monitor 1 to 12 line)
V18SZ0
V18SZ1
VSZ2L0
VSZ2L1
VSZ2H0
VSZ2H1
0
0
1
1
0
1
0
1
1H/dot
2H/dot
3H/dot
4H/dot
H: Cycle with the horizontal synchronizing pulse
VSZ2L1 VSZ2L0 Vertical direction size
Character size setting in the vertical
direction (display monitor for 2 to 12
line) at “0” state in register LIN2 to
LIN17 (address 12516, 12616).
0
0
1
1
0
1
0
1
1H/dot
2H/dot
3H/dot
4H/dot
H: Cycle with the horizontal synchronizing pulse
VSZ2H1 VSZ2H0 Vertical direction size
Character size setting in the vertical
direction (display monitor for 2 to 12
line) at “0” state in register LIN2 to
LIN17 (address 12516, 12616).
0
0
1
1
0
1
0
1
1H/dot
2H/dot
3H/dot
4H/dot
Sets the priority page for when 2 pages are
displayed at the same time. The setting is
effective only when the standard display
mode is set as MODE0 = "0" , MODE1 = "0".
See "DISPLAY FORM 2" .
0
1
Page 1 priority display
Page 0 priority display
POPUP
(Note 3)
____
Notes 1. The mark
around the status value means the reset status by the "L" level is input to AC pin.
2. The page in which data is written is controlled by the DAF bit. When set to "0", data is written into page 0, whereas when set to "1",
data is written into page 1.
3. Registers marked with (Note 3) are found only in page 0, therefore the register value does not change when the DAF bit is set to "1".
14
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
(8) Address 12716
Contents
Function
DA
0
Register
RR
Remarks
Status
0
RB
0
RG
0
RR
0
Color
Sets the raster color of all blankings.
Black
Red
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
0
1
0
1
0
Green
Yellow
Blue
0
1
1
1
2
3
4
5
6
7
8
9
A
B
C
D
E
RG
RB
1
0
0
1
0
1
Magenta
Cyan
1
1
0
1
1
1
White
Sets the blanking color of the Border
size, or the shadow size.
FB
0
FG
0
FR
0
Color
Black
Red
FR
0
0
1
0
1
0
Green
Yellow
Blue
0
1
1
FG
1
0
0
1
0
1
Magenta
Cyan
1
1
0
1
1
1
White
FB
It should be fixed to “0”.
Can not be used.
TEST6
TEST7
TEST8
BETA14
HSZ10
TEST11
It should be fixed to “0”.
Can not be used.
It should be fixed to “0”.
Can not be used.
Matrix-outline display (12 × 18 dot)
Matrix-outline display (14 × 18 dot)
Character size setting in the horizontal
direction for the first line.
T : Display frequency cycle
Horizontal direction size
HSZ10
0
1
1T/dot
2T/dot
It should be fixed to “0”.
Can not be used.
HSZ20
0
1
Horizontal direction size
1T/dot
2T/dot
HSZ20
Character size setting in the horizontal
direction for the 2nd line to 12th line.
T : Display frequency cycle
It should be fixed to “0”.
Can not be used.
TEST12
Display mode
Standard.(Note4)
AND
Sets the RGB signal output system
and the display mode for when 2
pages are displayed at the same time.
See “DISPLAY FORM 2”.
Output system
MODE1 MODE0
1 system
1 system
2 system
1 system
0
0
1
1
0
1
0
1
MODE0
(Note 3)
OR
MODE1(address12816) .
____
Notes 1. The mark
around the status value means the reset status by the "L" level is input to AC pin.
2. The page in which data is written is controlled by the DAF bit. When set to "0", data is written into page 0, whereas when set to "1", data is written into
page 1.
3. Registers marked with (Note 3) are found only in page 0, therefore the register value does not change when the DAF bit is set to "1".
4. 2 way settings are available by POPUP (address 12616).
15
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
(9) Address 12816
Contents
Function
DA
0
Register
BCOL
Remarks
Status
0
Blanking of BLK0, BLK1
All raster blanking
Sets all raster blanking
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Synchronize with the leading edge of horizontal synchronization.
Synchronize with the trailing edge of horizontal synchronization.
Do not mask by VERT input signal
Mask by VERT input signal
__
B/F
Synchronize with the front porch or
back porch of the horizontal
synchronazation signal.
1
2
3
4
5
6
7
8
9
A
B
C
D
E
(Note 3)
Set mask at phase comparison
operating.
VMASK
(Note 3)
VERT pin is negative polarity
Set VERT pin polarity.
Set HOR pin polarity.
POLV
(Note 3)
VERT pin is positive polarity
HOR pin is negative polarity
POLH
(Note 3)
HOR pin is positive polarity
Set blanking mode.
See “DISPLAY SHAPE 2”.
Blanking mode
BLK1
BLK0
BLK0
BLK1
0
1
0
1
Matrix-outline size
Character size
Border size
0
0
1
1
Matrix-outline size
(When DSPn (address 12416) = “0”)
Border display of character
See “DISPLAY FORM1 (2)”.
SYAD
Shadow display of character
RAM not erased
When register RAMERS is set to
“1”,do not stop the display clock.
There is no need to reset because
there is no register for this bit.
RAMERS
STOP
RAM erased
Oscillation of clock for display
Stop the oscillation of clock for display
Display OFF
It is a test bit (TEST13) in the page 1
register, therefore fix it to “0”.
DSPON
BLINK0
BLINK1
BLINK2
Display ON
BLINK
Duty
Set blinking duty ratio.
1
0
0
1
1
0
0
1
0
1
Blinking OFF
25%
50%
75%
Divided into 64 of vertical synchronous signal
Divided into 32 of vertical synchronous signal
For setting, see MODE0 (address 12716).
Set blinking frequency.
Sets the RGB signal output system
and the display mode for when 2
pages are displayed at the same time.
MODE1
(Note 3)
____
Notes 1. The mark
around the status value means the reset status by the "L" level is input to AC pin.
2. The page in which data is written is controlled by the DAF bit. When set to "0", data is written into page 0, whereas when set to "1",
data is written into page 1.
3. Registers marked with (Note 3) are found only in page 0, therefore the register value does not change when the DAF bit is set to "1".
16
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
REGISTER SUPPLEMENTARY DESCRIPTION
(1) Setting external clock input and display frequency mode
Setting external clock input and display frequency mode (by
use of EXCK0 (12016), EXCK1 (12316) and DIV10 to DIV0
(12016), as explained here following.
(c) When (EXCK1, EXCK0) = (1, 0) ......… Setting disabled
(d) When (EXCK1, EXCK0) = (1, 1) ......External clock mode 2
Fosc = 20 to 110 MHz (VDD = 4.75 to 5.25 V)
Input from the TCK pin a constant-period continuous external
clock that synchronizes with the horizontal synchronous
signal. And input from HOR pin a constant-period continuous
horizontal synchronous signal.
(a) When (EXCK1, EXCK0) = (0, 0) ......External clock mode 1
Fosc = 6.3 to 80 MHz (VDD = 4.75 to 5.25 V)
Fosc = 6.3 to 40 MHz (VDD = 2.50 to 3.50 V)
Input from the TCK pin a constant-period continuous
external clock that synchronizes with the horizontal
synchronous signal. And input from HOR pin a constant
period continuous horizontal synchronous signal.
Never stop inputting the clock while displaying.
Do not have to set a display frequency because the clock
just as it is entered from outside is used as the display
clock.
Never stop inputting the clock while displaying.
An internal clock which is in sync with the external input clock
is used as the display clock.
Because the display frequency equals the external clock
frequency, set N1 (division value) that satisfies the below
expressions to DIV10 to DIV0 (address 12016) for make the
display frequency is equal to the external clock frequency.
N1 = external clock frequency / horizontal synchronous
frequency
10
(b) When (EXCK1, EXCK0) = (0, 1) ......Internal clock mode
Fosc = 20 to 110 MHz (VDD = 4.75 to 5.25 V)
n
N1 =
Σ
2 DIVn
n = 0
Also, set the display frequency range. (See the next page.)
Clock input from the TCK pin is unnecessary. The multiply
clock of the internally generated horizontal synchronous
signal is used as the display clock.
The display frequency is set by setting the multiply value of
the horizontal synchronous frequency (of the display
frequency) in DIV10 to DIV0 (address 12016). Also, set the
display frequency range. (See the next page.)
Display frequency is calculated using the below expression.
Display frequency = Horizontal synchronous frequency x
Multiply value
Horizontal synchronous signal
1H
External clock
Number of clock (N1)
Fig. 4 Example of external clock input
17
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
(2) To set display frequency range
Whenever setting display frequency (when EXCK1 = "0",
EXCK0 = "1", or EXCK1 = "1", EXCK0 = "1"), always set the
display frequency range in accordance with the display
frequency. This range is set from DIVS0, DIVS1, DIVS2
(address 12016), RSEL0 address 12116) and RSEL1 (address
12216). Frequency ranges are given here below.
Display frequency range(MHz)
RSEL1
DIVS2 DIVS1 DIVS0
RSEL0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
100.0 to 110.0
92.0 to 100.0
73.0 to 92.0
66.5 to 73.0
61.0 to 66.5
49.0 to 61.0
45.5 to 49.0
36.5 to 45.5
33.5 to 36.5
30.5 to 33.5
24.5 to 30.5
23.0 to 24.5
20.0 to 23.0
(3) Notes on setting display frequency
To change external clock (display) frequency or horizontal
synchronization frequency, always use the following
procedures.
To set EXCK1 = "0", EXCK0 = "1"
(a) Turn the display OFF. … DSPON (address 12816) = "0"
(b) Set the display frequency. … Set from DIV10 to DIV0,
DIVS0, DIVS1, DIVS2 (address 12016), RSEL0 (address
12116) and RSEL1 (address 12216).
(c) Wait 20 ms while the horizontal synchronization signal is
being input.
(d) Turn the display ON. … DSPON (address 12816) = "1"
To set EXCK1 = "1", EXCK0 = "1"
(a) Turn the display OFF. … DSPON (address 12816) = "0"
(b) Set the display frequency. … Set from DIV10 to DIV0,
DIVS0, DIVS1, DIVS2 (address 12016), RSEL0 (address
12116) and RSEL1 (address 12216).
(c) Wait 20 ms while the horizontal synchronization signal
and external clock are being input.
(d) Turn the display ON. … DSPON (address 12816) = "1"
18
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
DISPLAY FORM 1
Matrix-outline size
M35076-XXXSP has the following four display forms.
: Blanking the background 12 × 18 dot.
All blanking size
(1) Blanking mode
Character size
: When set register BCOL to “1”, all raster area is blanking.
: Blanking same as the character size.
Border size
The display mode and blanking mode can be set line-by-line, as fol-
lows, from registers BCOL, BLK1, BLK0 (address 12816), DSP0 to
DSP11 (address 12416).
: Blanking the background as a size from character.
Line of DSPn = “0”
Display mode
All matrix-outline border display All matrix-outline size All matrix-outline display All matrix-outline size
Line of DSPn = “1”
BLK0
BLK1
BCOL
0
Blanking mode
Display mode Blanking mode
0
1
0
1
0
1
0
1
0
0
1
1
0
0
1
1
Character display
Border display
Border display
Border size
Character size
Border size
All matrix-outline display All matrix-outlinesize
All matrix-outline display All matrix-outline size
All matrix-outline border display
Character display
All matrix-outline display
Border display
Character size
Character display
1
All blanking size
All blanking size
Border display
All matrix-outline display
Character display
All matrix-outline display
<Register BCOL=“0”>
(Note 1)
12 dots (Note 2)
12 dots
12 dots
12 dots (Note 2)
Scanning
(Note 2)
R0,G0 or B0 output
R1,G1 or B1 output
BLNK0 output
BLNK1 output
Character color: R,G,B of display RAM
(Character unit)
color setting
Character color : R,G,B of display RAM
(Character unit)
Character color
: R,G,B of display RAM
(Character unit)
Character color
: R,G,B of display RAM
(Character unit)
Border color :Register FR,FG,FB
(Display unit)
Matrix-outline color :BR,BG,BB of display RAM
(Character unit)
Matrix-outline color :BR,BG,BB of displayRAM
(Character unit)
Matrix-outline color :BR,BG,BB of display RAM
(Character unit)
(c) Border display
(Border size)
(b) Character display
(Character size)
(a) Matrix-outline and border
display (Matrix-outline size)
(d) Matrix-outline display
(Matrix-outline size)
(
) is blankin mode.
Note 1. When register BCOL is set to “1”, the raster range of the display modes set respectively by BLK1 and BLK0 are colored by registers RR, RG, and RB
(address 12716). And the blanking mode is set all blanking size (all raster size) regardless of the BLK1 and BLK0 settings.
Note 2. When register MODE1,0=1,0 setting, RGB signal of page 0 is output from R0,G0,B0 and BLNK0 pin, and RGB signal of page 1 is output from R1,
G1,B1 and BLNK1 pin.
Note 3. The horizontal size of the full matrix-outline size can be set to 14 dots by register BETA14 (address 12716). BLNK0 and BLNK1 can also be output at 14 dots.
Fig. 5 Example of R0,G0,B0,BLNK0,R1,G1,B1 and BLNK1 signal output
19
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
(2) Shadow display
When border display mode, if set SYAD (address 12816) = “0” to
“1”, it change to shadow display mode.
Border and shadow display are shown below.
Set shadow display color by BR, BG or BB of display RAM or by
register FR, FG and FB (address 12716).
Register SYAD(12816 address) = “0”
Register SYAD(12816 address) = “1”
Border display
Shadow display
Fig. 6 Border and shadow display
20
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
DISPLAY FORM 2
This IC can display both page 0 and page 1 at the same time.
Page 0: Set the DAF bit in each addresses to "0".
Page 1: Set the DAF bit in each addresses to "1".
Example 1
Example 2
Page 0 (24 columns ✕ 12 line)
Page 0 (24 columns ✕ 12 line)
Menu
Menu
Setting
Setting
Help
End
Help
End
Screen size
Tone
Screen size
Tone
Page 1 (24 columns ✕ 12 line)
Page 1 (24 columns ✕ 12 line)
Monitor display
Monitor display
Fig. 7 Example of 2 pages display
Example 1: Display position, display size, color, etc., can be freely set for each page, and the 2 pages can be displayed on top of each other
or side-by-side.
Example 2: RGB output of two pages can be outputted by one line or two lines by registers MODE0 (address 12716) and MODE1 (address
12816) and POPUP (address 12616). And, when the display range of the 2 pages overlap on the monitor screen at the time of an
one-line output, they can perform the following displays. (The POPUP register is effective only when MODE0 = "0" and MODE1
= "0".)
Output system
1 system
Display mode
MODE1
0
MODE0
0
POPUP
Standard (Page 1 priority)
0
1
Standard (Page 0 priority)
1 system
AND
–
0
1
1
1
0
1
1 system
2 systems
1 system
OR
(1) Output system
(a) 1 system : Output RBG signal of both of page 0 and 1 from R0,G0,B0 and BLNK0 pin (For overlapping areas, refer to below.)
(b) 2 systems : RBG signal of page 0 is output from R0,G0,B0 and BLNK0 pin, RBG signal of page 1 is output from R1,G1,B1 and
BLNK1 pin.
(2) Display mode (Overlapping areas of Page 0 and 1)
(a) Standard (page 1 priority).. Page 1 has priority in overlapping areas. Page 0 is not displayed in those areas.
(b) Standard (page 0 priority).. Page 0 has priority in overlapping areas. Page 1 is not displayed in those areas.
(c) AND .................................. In overlapping areas, the RGB output of the 2 pages is AND processed and output.
(d) OR .................................... In overlapping areas, the RGB output of the 2 pages is OR processed and output.
Note : Set 0 (port output) to control register PTC2, PTC4 and PT67 except at 2 systems output setting (MODE1=1,MODE0=0.)
21
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
CHARACTER FONT
Images are composed on a 12 ✕ 18 dot matrix, and characters can
be linked vertically and horizontally with other characters to allow the
display the continuous symbols.
Character code FF16 is fixed as a blank without background.
Therefore, cannot register a character font in this code.
12 dots
When the character extends
to the top line of the matrix,
no border is left at the top.
When the character extends
to the bottom (18th) line of the
matrix, no border is left at the
bottom.
Note: Hatching represents border.
Fig. 8 Example of border display
22
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
DATA INPUT EXAMPLE
Data of display RAM and display control registers can be set by the
16-bit serial input function or the I2C-BUS serial input function. Ex-
ample of data setting is shown in Figure 9 (at EXCK0 = “1”, EXCK1 =
“0” setting).
Data input example (M35076-XXXSP)
DAF
Remarks
Address/data
DAD DAC DAB DAA DA9 DA8 DA7 DA6 DA5 DA4 DA3 DA2 DA1 DA0
(Note1) DAE
200m sec hold
System set up (Note 4)
Address 12016
0
DIV0
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
1
0
0
0
0
1
0
0
1
0
0
0
0
Address setting
0
Frequency value setting (Note2)
Data
Data
Data
Data
Data
Data
Data
Data
Data
12016
12116
12216
12316
12416
12516
12616
12716
12816
DIVS2DIVS1
DIV10 DIV9 DIV8 DIV7 DIV6 DIV5 DIV4 DIV3 DIV2 DIV1
DIVS0
Output setting
RSEL0 PTD7 PTD6
PTD4
1
PTD2
1
1
1
0
1
0
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Horizontal display location setting
HP0
VP0
0
RSEL1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
HP10 HP9 HP8 HP7 HP6 HP5 HP4 HP3 HP2 HP1
Vertical display location setting
Display form setting
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
VP9 VP8 VP7 VP6 VP5 VP4 VP3 VP2 VP1
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
Character size setting
Character size setting
Color, character size setting
0
0
0
0
POLHPOLV
Page 0 display OFF
Address setting
Address 12216
0
0
0
Horizontal display location setting
HP0
VP0
0
Data
Data
Data
Data
Data
Data
Data
12216
12316
12416
12516
12616
12716
12816
HP10 HP9 HP8 HP7
HP4 HP3 HP2 HP1
VP4 VP3 VP2 VP1
HP6 HP5
VP9 VP8 VP7
VP6 VP5
Vertical display location setting
Display form setting
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Character size setting
Character size setting
Color, character size setting
Page 1 display OFF
0
0
0
200m sec hold
C7
Be stable / Waiting time
Data
00016
C0
0
BB BG BR
B
G
R
C4 C3 C2 C1
Character code
C6 C5
BLINK
Background
coloring
Blink
-ing
Character setting
Character color
Data
11F16
C0
0
0
0
1
BB BG BR
B
0
G
0
R
0
C7 C6 C5 C4 C3 C2 C1
BLINK
0
Address 00016
0
0
0
0
0
0
0
0
0
0
0
Data
00016
C0
BB BG BR
B
G
R
C4 C3 C2 C1
C6 C5
BLINK
Background
coloring
Blink
-ing
Character color
Character code
Character setting
Address setting
Data
11F16
C0
0
1
0
BB BG BR
B
0
0
0
R
1
0
0
C4 C3 C2 C1
C6 C5
BLINK
0
Address 12816
Data 12816
Address 12816
Data 12816
0
0
0
0
1
0
0
0
1
1
1
Page 1 display ON
1
0
0
0
0
1
0
0
0
0
0
0
0
0
Display form setting (Note 3)
Address setting
0
0
0
0
0
0
0
0
0
1
0
0
1
0
0
0
0
1
0
0
0
0
0
0
0
1
1
1
0
0
Page 0 display ON
POLH POLV
Display form setting (Note 3)
Notes 1 : The page in which data is written is controlled by the address. To write data into page 0, set "0". To write data into page 1, set "1".
2 : Input a continuous clock of constant period from the TCK pin. Also, input a horizontal synchronous signal into the HOR pin and
a vertical synchronous signal into the VERT pin.
3 : Matrix-outline display in this data.
4 : Secure the waiting time of 200ms after releasing AC, and set data from setting the display frequency (setting of the register).
5 : Set data to display RAM at internal clock (display clock) is stabilized.
Fig 9. Example of data setting
23
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
Horizontal synchronors signal (5V or 3V)
+5V or +3V
Synchronous signal
generator
Vertical synchronors signal (5V or 3V)
1
20
19
18
17
16
15
14
13
12
11
CPOUT
2
VDD2
V
SS2
VERT
HOR
1µF
–
3
4
+
AC
B0
G1
CS
P5/B0
5
Microcomputer
SCK/SCL
SIN/SDA
TCK
P4/G1
6
P3/G0
G0
7
External clock
P2/R1
R1
8
V
DD1
P1/R0
R0
9
B1
P6/B1
P0/BLNK0
BLNK0
10
BLNK1
P7/BLNK1
VSS1
100µF
100µF
+5V or +3V
+
–
–
+
1µF
1µF
0.01µF
0.01µF
Note1. CPOUT pin can be opened when use only EXCK1 = "0" and EXCK0 = "0".
2
Note2. Connect to VDD with CS pin at the I C-Bus serial communication.
Fig 10. Example of the M35076-XXXSP peripheral circuit ( External clock mode 1. At EXCK1 = “0”, EXCK0 = “0”)
Horizontal synchronors signal (5V)
Synchronous signal
+5V
Vertical synchronors signal (5V)
generator
1
20
19
18
17
16
15
14
13
12
11
CPOUT
VDD2
1.0kΩ(Note 1)
0.1µF(Note 2)
470PF (Note 2)
2
3
V
SS2
VERT
HOR
1µF
+
–
AC
4
B0
CS
P5/B0
5
G1
G0
SCK/SCL
SIN/SDA
TCK
P4/G1
Microcomputer
6
P3/G0
7
P2/R1
R1
8
R0
V
DD1
P1/R0
9
BLNK0
B1
P6/B1
P0/BLNK0
10
BLNK1
P7/BLNK1
VSS1
100
µ
F
100
µ
F
+5V
+
+
–
–
1µF
1µF
0.01µF
0.01µF
Note 1: Use this 1% precision element
Note 2: Use this 10% precision element
2
Note3. Connect to VDD with CS pin at the I C-Bus serial communication.
Fig 11. Example of the M35076-XXXSP peripheral circuit ( Internal clock mode. At EXCK1 = “0”, EXCK0 = “1”)
24
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
Horizontal synchronors signal (5V)
+5V
Synchronous signal
generator
Vertical synchronors signal (5V)
1
20
19
18
17
16
15
14
13
12
11
CPOUT
VDD2
1.0kΩ(Note 1)
0.1µF(Note 2)
470PF (Note 2)
2
3
V
SS2
VERT
HOR
1µF
+
–
AC
4
B0
G1
CS
P5/B0
5
Microcomputer
SCK/SCL
SIN/SDA
TCK
P4/G4
6
G0
P3/G0
7
R1
External clock
P2/R1
8
R0
V
DD1
P1/R0
9
BLNK0
B1
P6/B1
P0/BLNK0
10
BLNK1
P7/BLNK1
VSS1
100µF
100µF
+5V
+
–
–
+
1µF
1µF
0.01µF
0.01µF
Note 1: Use this 1% precision element
Note 2: Use this 10% precision element
2
Note3. Connect to VDD with CS pin at the I C-Bus serial communication.
Fig 12. Example of the M35076-XXXSP circuit (External clock mode 2. At EXCK1 = “1”, EXCK0 = “1”)
25
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
DATA INPUT 1
__
(d)The 16 bits in the SCK after the CS signal has fallen are the
(1) The16-bit communication function
(a)Serial data should be input with the LSB first.
(b)The address consists of 16 bits.
(c)The data consists of 16 bits.
address, and for succeeding input data, the address is
incremented every 16 bits. Therefore, it is not necessary to in
put the address from the second data.
___
__
Note. Stop the input to SCK pin and fix it to “H” at CS pin
“H” level.
CS
SCK
SIN
LSB
MSB LSB
MSB LSB
MSB
Address(16 bits)
Data(16 bits)
N
Data(16 bits)
N + 1
………
N = 1,2,3
Fig.13 Serial input timing
26
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
(2)Timing requirements
Data input
Limits
Symbol
Parameter
Unit
Remarks
Min.
200
200
2
Typ.
—
Max.
—
tw(SCK)
__
SCK width
__
ns
ns
µs
ns
ns
µs
tsu(CS)
__
—
—
CS setup time
__
CS hold time
th(CS)
tsu(SIN)
th(SIN)
tword
—
—
See Figure 14
200
200
10
—
—
SIN setup time
SIN hold time
—
—
—
—
1 word writing time
tw(CS)
1µs(min.)
CS
tsu(CS)
tw(SCK)
tw(SCK)
th(CS)
SCK
tsu(SIN)
th(SIN)
SIN
CS
tword
more than 2 µs
SCK
…
…
1
2
12
13
14
15
16
1
12
13
14
15
16
Fig. 14 Serial input timing requirements
27
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
DATA INPUT 2
2
(1) The I C-Bus communication function (at VDD=5V only)
This IC has a built-in data transmission interface which utilizes
2 unidirectional buses. In communications, this IC functions as
__
2
a slave reception device. Set CS pin to “H” level at the I C-Bus
serial input communication.
The IC is synchronized with the serial clock (SCL) sent from
the master device and receives the data (SDA). Communica-
tions are controlled from the start/stop states. Also, always in-
put the control byte after attaining the start state.
The below chart shows the start/stop state and control byte
configuration.
SCL
SDA
Start state
Data receive Data modify
enable
Stop state
Note1. Connect to VDD with CS pin.
Fig. 15 Start state / Stop state
Control byte: 7C16(Fixed)
Slave address
R/W
0
0
1
1
1
1
1
0
(0: Written)
Fig. 16 Control byte configuration
28
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
(2) Data input (Sequence)
(a) Addresses are consists of 16 bits.
(b) Data is consists of 16 bits.
(c) Addresses and data are communicated in 8-bit units. Input the
lower 8 bits before the upper 8 bits. Make input from the MSB
side.
(d) After the start state has been attained and the control byte
(7CH) received, the next 16 bits (2 bytes) are for inputting the
address. Addresses are increased in increments for every 16
bits (2 bytes) of data input thereafter. As a result, it is not
necessary to input the address from the second data.
Note: During external synchronous, stop the external clock input
from the TCK pin while inputting data.
S
T
A
R
T
S
T
O
P
Control byte
Upper data
Lower address
Upper address
Lower data
lower data
(
)
( )
N
( )
N
( )
N
( )
N
(
)
7 CH
N + 1
M
S
B
L
S
B
M
S
B
L
S
B
M
S
B
L
S
B
M
S
B
L
S
B
M
S
B
L
S
B
SDA
S
P
A
C
K
A
C
K
A
C
K
A
C
K
A
C
K
*
A
C
K
ACK* (Acknowledge) : Output the acknowledge signal whenever one byte input after the start state.
Output the acknowledge signal and recieve the data thereafter when mach the slave
address (7CH).
Fig. 17 Data input sequence
29
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
(3) Timing requirement
Data input
Limits
Remarks
Typ. mode
Unit
High-speed mode
Symbol
fCLK
Parameter
Max.
Max.
400
–
Min.
0
Min.
0
100
–
Clock frequency
HIGH period of Clock
KHz
ns
600
tHIGH
tLOW
4000
4700
–
–
1300
LOW period of Clock
ns
20+(Note)
0.1CB
20+(Note)
0.1CB
600
1000
300
tR
tF
–
–
SDA & SCL rise time
ns
300
–
300
–
SDA & SCL fall time
ns
ns
tHD : STA
tSU : STA
Hold time at START status
Set up time at START status
4000
4700
Only at START state
repeating generation
600
–
–
ns
0
tHD : DAT
tSU : DAT
tSU : STO
Data input hold time
0
–
–
–
–
–
–
ns
ns
ns
100
600
Data input setup time
Set up time at STOP state
250
4000
Time must be re-
leased bus before
next transmission
1300
0
tBUF
Bus release time
4700
N/A
–
–
ns
ns
tSP
Input filter / spike suppress (SDA & SCL pin)
N/A
50
Note. CB = total capacitance of 1 bus line.
t
R
t
F
t
HIGH
t
LOW
SCL
t
SU : STO
t
HD : DAT
tsu : STA
t
SU : DAT
t
HD : STA
SDA
tSP
t
BUF
Fig. 18 Data input timing
30
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
ABSOLUTE MAXIMUM RATINGS (VDD = 5.00V, Ta = –20 to +85°C, unless otherwise noted)
Symbol
VDD
VI
Parameter
Conditions
With respect to VSS.
Ratings
–0.3 to +6.0
Unit
V
Supply voltage
Input voltage
VSS –0.3 ≤ VI ≤ VDD +0.3
VSS ≤ VO ≤ VDD
+300
V
VO
Output voltage
Power dissipation
V
Pd
Ta = +25°C
mW
°C
°C
Topr
Tstg
Operating temperature
Storage temperature
–20 to +85
–40 to +125
RECOMMENDED OPERATING CONDITIONS (VDD = 5.00V, Ta = –20 to +85°C, unless otherwise noted)
Limits
Symbol
Parameter
5V
Unit
Min.
4.75
Typ.
5.0
Max.
5.25
V
V
VDD
VIH
Supply voltage
3V
__ __
2.50
0.8VDD
0.7VDD
0
3.0
VDD
VDD
0
3.50
VDD
AC, CS, HOR, VERT
V
“H” level input voltage
SCK/SCL, SIN/SDA
__ __
VDD
V
0.2VDD
0.3VDD
80.0
V
AC, CS, HOR, VERT
SCK/SCL, SIN/SDA
VIL
“L” level input voltage
0
0
V
6.3
VDD = 4.75 to 5.25 V
VDD = 2.50 to 3.50 V
VDD = 4.75 to 5.25 V
VDD = 4.75 to 5.25 V
VDD = 4.75 to 5.25 V
VDD = 2.50 to 3.50 V
—
MHz
MHz
MHz
MHz
kHz
kHz
External clock mode 1
Oscillating frequency
for display
6.3
—
40.0
FOSC
20.0
20.0
15.0
15.0
External clock mode 2
Internal clock mode
—
110.0
110.0
130.0
60.0
—
Horizontal synchronous signal input frequeney
H.sync
—
—
ELECTRICAL CHARACTERISTICS 1 VDD=5V (VDD = 5.00V, Ta = 25°C, unless otherwise noted)
Limits
Typ.
Parameter
Symbol
Test conditions
Unit
Max.
5.25
60
Min.
4.75
—
Supply voltage
Supply current
VDD
IDD
Ta = –20 to +85°C
V
5.0
40
VDD = 5.00V
mA
P0 to P7 (Note1)
CPOUT
VDD = 4.75V, IOH = -0.4mA
VDD = 4.75V, IOH = -0.05mA
VDD = 4.75V, IOL = 0.4mA
VDD = 4.75V, IOL = 0.05mA
VDD = 4.75V, IOL = 3.0mA
VDD = 5.00V
“H” level output voltage
VOH
VOL
3.5
—
V
V
—
P0 to P7 (Note2)
CPOUT
“L” level output voltage
0.4
—
—
SIN/SDA
__ __
RI
100
10
30
Pull-up resistance AC, CS
External clock input width
kΩ
VTCK
4.75V ≤ VDD ≤ 5.25V
0.9VDD
0.6VDD
—
V
Notes 1. The current from the IC must not exceed – 0.4 mA/port at any of the port pins (P0 to P7).
2. The current flowing into the IC must not exceed 0.4 mA/port at any of port pins (P0 to P7).
31
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
ELECTRICAL CHARACTERISTICS 2 VDD=3V (VDD = 3.00V, Ta = 25°C, unless otherwise noted)
Limits
Typ.
Symbol
Unit
Parameter
Test conditions
Max.
3.50
30
Min.
2.50
—
VDD
IDD
V
Supply voltage
Supply current
Ta = –20 to +85°C
3.00
mA
VDD = 3.00V
20
2.30
—
VDD = 2.70V, IOH = -0.1mA
VDD = 2.70V, IOH = 0.1mA
VDD = 3.00V
VOH
V
P0 to P7 (Note1)
P0 to P7 (Note2)
“H” level output voltage
“L” level output voltage
—
—
—
—
—
VOL
RI
V
0.4
__ __
30
kΩ
Pull-up resistance AC, CS
External clock input width
150
VDD
0.7VDD
VTCK
V
2.20V ≤ VDD ≤ 3.50V
Notes 1. The current from the IC must not exceed – 0.1 mA/port at any of the port pins (P0 to P7).
2. The current flowing into the IC must not exceed 0.1 mA/port at any of port pins (P0 to P7).
32
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
NOTE FOR SUPPLYING POWER
After supplying the power (VDD and VSS) to M35076-XXXSP and
__
(1)Timing of power supplying to AC pin
the supply voltage becomes more than 0.8 × VDD, it needs to keep
__
The internal circuit of M35076-XXXSP is reset when the level of
__
VIL time; tw of the AC pin for more than 1ms.
__
the auto clear input pin AC is “L”. This pin in hysteresis input with
Start inputting from microcomputer after AC pin supply voltage
the pull-up resistor.
__
becomes more than 0.8 × VDD and keeping 200ms wait time.
The timing about power supplying of AC pin is shown in Figure 19.
(2)Timing of power supplying to VDD1 and VDD2.
Supply power to VDD1 and VDD2 at the same time.
Voltage [V]
Data input disable
V
DD
Supply voltage
V
AC
(AC pin input voltage)
0.8 x VDD
0.2 x VDD
Time t [s]
t
W
more than 1ms
tS
__
Fig. 19 Timing of power supplying to AC pin
PRECAUTION FOR USE
Notes on noise and latch-up
DATA REQUIRED FOR MASK ROM
ORDERING
In order to avoid noise and latch-up, connect a bypass capacitor
(≈0.1µF) directly between the VDD1 pin and VSS1 pin, and the VDD2
pin and VSS2 pin using a heavy wire.
Please send the following data for mask orders.
(1) M35076-XXXSP mask ROM order confirmation form
(2) 20P4B mark specification form
(3) ROM data : EPROMs or floppy disks
*In the case of EPROMs, thres sets of EPROMs are required
per pattern.
Note for waveform timing of the horizontal signals to the HOR pin
Set horizontal synchronous signal edge waveform timing to under
5ns and input to HOR pin.
_
*In the case of floppy disks, 3.5-inch 2HD disk (1BM format) is
required per pattern.
Set only the side which set by B/F register waveform timing under
5ns and input to HOR pin.
_
: Set front porch edge or back porch edge by B/F register.
tf
tr
90%
Horizontal synchronous signal
10%
33
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
STANDARD ROM TYPE : M35076-001SP
M35076-001SP is a standard ROM type of M35076-XXXSP.
The character patterns for 0 page are fixed to the contents of Figure
20 to 23, the character patterns for page 1 are fixed to the contents
of Figure 24 to 27.
34
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
0016
0816
1016
1816
2016
2816
3016
3816
0116
0916
1116
1916
2116
2916
3116
3916
0216
0A16
1216
1A16
2216
2A16
3216
3A16
0316
0B16
1316
1B16
2316
2B16
3316
3B16
0416
0C16
1416
1C16
2416
2C16
3416
3C16
0516
0D16
1516
1D16
2516
2D16
3516
3D16
0616
0E16
1616
1E16
2616
2E16
3616
3E16
0716
0F16
1716
1F16
2716
2F16
3716
3F16
Fig. 20 M35076-001SP character pattern for page 0 (1)
35
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
4016
4816
5016
5816
6016
6816
7016
7816
4116
4916
5116
5916
6116
6916
7116
7916
4216
4A16
5216
5A16
6216
6A16
7216
7A16
4316
4B16
5316
5B16
6316
6B16
7316
7B16
4416
4C16
5416
5C16
6416
6C16
7416
7C16
4516
4D16
5516
5D16
6516
6D16
7516
7D16
4616
4E16
5616
5E16
6616
6E16
7616
7E16
4716
4F16
5716
5F16
6716
6F16
7716
7F16
Fig. 21 M35076-001SP character pattern for page 0 (2)
36
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
8016
8816
9016
9816
A016
A816
B016
B816
8116
8916
9116
9916
A116
A916
B116
B916
8216
8A16
9216
9A16
A216
AA16
B216
BA16
8316
8B16
9316
9B16
A316
AB16
B316
BB16
8416
8C16
9416
9C16
A416
AC16
B416
BC16
8516
8D16
9516
9D16
A516
AD16
B516
BD16
8616
8E16
9616
9E16
A616
AE16
B616
BE16
8716
8F16
9716
9F16
A716
AF16
B716
BF16
Fig. 22 M35076-001SP character pattern for page 0 (3)
37
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
C016
C816
D016
D816
E016
E816
F016
F816
C116
C916
D116
D916
E116
E916
F116
F916
C216
CA16
D216
DA16
E216
EA16
F216
FA16
C316
CB16
D316
DB16
E316
EB16
F316
FB16
C416
CC16
D416
DC16
E416
EC16
F416
FC16
C516
CD16
D516
DD16
E516
ED16
F516
FD16
C616
CE16
D616
DE16
E616
EE16
F616
FE16
C716
CF16
D716
DF16
E716
EF16
F716
FF16 blank
Fig. 23 M35076-001SP character pattern for page 0 (4)
38
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
0016
0816
1016
1816
2016
2816
3016
3816
0116
0916
1116
1916
2116
2916
3116
3916
0216
0A16
1216
1A16
2216
2A16
3216
3A16
0316
0B16
1316
1B16
2316
2B16
3316
3B16
0416
0C16
1416
1C16
2416
2C16
3416
3C16
0516
0D16
1516
1D16
2516
2D16
3516
3D16
0616
0E16
1616
1E16
2616
2E16
3616
3E16
0716
0F16
1716
1F16
2716
2F16
3716
3F16
Fig. 24 M35076-001SP character pattern for page 1 (1)
39
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
4016
4816
5016
5816
6016
6816
7016
7816
4116
4916
5116
5916
6116
6916
7116
7916
4216
4A16
5216
5A16
6216
6A16
7216
7A16
4316
4B16
5316
5B16
6316
6B16
7316
7B16
4416
4C16
5416
5C16
6416
6C16
7416
7C16
4516
4D16
5516
5D16
6516
6D16
7516
7D16
4616
4E16
5616
5E16
6616
6E16
7616
7E16
4716
4F16
5716
5F16
6716
6F16
7716
7F16
Fig. 25 M35076-001SP character pattern for page 1 (2)
40
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
8016
8816
9016
9816
A016
A816
B016
B816
8116
8916
9116
9916
A116
A916
B116
B916
8216
8A16
9216
9A16
A216
AA16
B216
BA16
8316
8B16
9316
9B16
A316
AB16
B316
BB16
8416
8C16
9416
9C16
A416
AC16
B416
BC16
8516
8D16
9516
9D16
A516
AD16
B516
BD16
8616
8E16
9616
9E16
A616
AE16
B616
BE16
8716
8F16
9716
9F16
A716
AF16
B716
BF16
Fig. 26 M35076-001SP character pattern for page 1 (3)
41
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
C016
C816
D016
D816
E016
E816
F016
F816
C116
C916
D116
D916
E116
E916
F116
F916
C216
CA16
D216
DA16
E216
EA16
F216
FA16
C316
CB16
D316
DB16
E316
EB16
F316
FB16
C416
CC16
D416
DC16
E416
EC16
F416
FC16
C516
CD16
D516
DD16
E516
ED16
F516
FD16
C616
CE16
D616
DE16
E616
EE16
F616
FE16
C716
CF16
D716
DF16
E716
EF16
F716
FF16 blank
Fig. 27 M35076-001SP character pattern for page 1 (4)
42
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
PACKAGE OUTLINE
43
MITSUBISHI MICROCOMPUTERS
M35076-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
Keep safety first in your circuit designs!
•
Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of non-flammable
material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
•
•
•
These materials are intended as a reference to assist our customers in the selection of the Mitsubishi semiconductor product best suited to the customer’s application; they do not convey any license under any intellectual property
rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third party.
Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples
contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by
Mitsubishi Electric Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product
distributor for the latest product information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Mitsubishi Electric Corporation by various means, including the Mitsubishi Semiconductor home page (http://www.mitsubishichips.com).
When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision
on the applicability of the information and products. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein.
Mitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Mitsubishi Electric
Corporation or an authorized Mitsubishi Semiconductor product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical,
aerospace, nuclear, or undersea repeater use.
•
•
•
•
The prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in whole or in part these materials.
If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved
destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
•
Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for further details on these materials or the products contained therein.
© 2002 MITSUBISHI ELECTRIC CORP.
New publication, effective MAR. 2002.
Specifications subject to change without notice.
M35076-XXXSP Data Sheet
REVISION DESCRIPTION LIST
Rev.
Rev.
date
Revision Description
No.
1.0 First Edition
0203
(1/1)
相关型号:
M35076-001SP
24X12 CHARACTERS CRT CHAR DSPL CTLR, PDIP20, 0.300 INCH, 1.78 MM PITCH, PLASTIC, SDIP-20
RENESAS
M35080-BN3
1KX8 SPI BUS SERIAL EEPROM, PDIP8, 0.25 MM LEAD FRAME, SKINNY, PLASTIC, DIP-8
STMICROELECTR
M35080-BN6
1KX8 SPI BUS SERIAL EEPROM, PDIP8, 0.25 MM LEAD FRAME, SKINNY, PLASTIC, DIP-8
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明