HD74CBT3257TELL-E [RENESAS]
CBT/FST/QS/5C/B SERIES, QUAD 1 LINE TO 2 LINE MULTIPLEXER AND DEMUX/DECODER, TRUE OUTPUT, PDSO16, LEAD FREE, TSSOP-16;![HD74CBT3257TELL-E](http://pdffile.icpdf.com/pdf1/p00157/img/icpdf/HD74C_872378_icpdf.jpg)
型号: | HD74CBT3257TELL-E |
厂家: | ![]() |
描述: | CBT/FST/QS/5C/B SERIES, QUAD 1 LINE TO 2 LINE MULTIPLEXER AND DEMUX/DECODER, TRUE OUTPUT, PDSO16, LEAD FREE, TSSOP-16 解复用器 逻辑集成电路 光电二极管 |
文件: | 总13页 (文件大小:230K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
To all our customers
Regarding the change of names mentioned in the document, such as Hitachi
Electric and Hitachi XX, to Renesas Technology Corp.
The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas
Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog
and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.)
Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors, and other Hitachi brand
names are mentioned in the document, these names have in fact all been changed to Renesas
Technology Corp. Thank you for your understanding. Except for oporate trademark, logo and
corporate statement, no changes whatsoever have been made to of the document, and
these changes do not constitute any alteration to the contenelf.
Renesas Technology Home Pcom
Renesas Technology Corp.
Customer Support Dept.
April 1, 2003
Cautions
Keep safety first in your circuit designs!
1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better
and more reliable, but there is always the possibility that trouble may occur with them. Trouble with
semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate
measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or
(iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas
Technology Corporation product best suited to the customer's application; they do not convey any
license under any intellectual property rights, or any other rights, belonginto Renesas Technology
Corporation or a third party.
2. Renesas Technology Corporation assumes no responsibility for any ringement of any
third-party's rights, originating in the use of any product data, dims, algorithms, or
circuit application examples contained in these materials.
3. All information contained in these materials, including programs and
algorithms represents information on products at the tirials, and are
subject to change by Renesas Technology Corporatct improvements or
other reasons. It is therefore recommended thachnology Corporation
or an authorized Renesas Technology Corporlatest product information
before purchasing a product listed herein.
The information described here may coypographical errors.
Renesas Technology Corporation assdamage, liability, or other loss
rising from these inaccuracies or
Please also pay attention to infTechnology Corporation by various
means, including the Renesmiconductor home page
(http://www.renesas.com
4. When using any or aln these materials, including product data, diagrams,
charts, programs, o evaluate all information as a total system before
making a final the information and products. Renesas Technology
Corporation ny damage, liability or other loss resulting from the
information
5. Renesas Technmiconductors are not designed or manufactured for use in a device
or system that is umstances in which human life is potentially at stake. Please contact
Renesas Technology on or an authorized Renesas Technology Corporation product distributor
when considering the usa product contained herein for any specific purposes, such as apparatus or
systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in
whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be
exported under a license from the Japanese government and cannot be imported into a country other
than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the
country of destination is prohibited.
8. Please contact Renesas Technology Corporation for further details on these materials or the products
contained therein.
HD74CBT3257
4-bit 1-of-2 FET Multiplexer / Demultiplexer
ADE-205-624B (Z)
Rev. 2
Nov. 2001
Description
The HD74CBT3257 is a 4-bit 1-of-2 high-speed TTL-compatible emultiplexer. The
low on-state resistance of the switch allows connections to be mn delay.
Output enable (OE) and select control (S) inputs select thuts for the A-input
data.
Features
•
•
•
•
Minimal propagation delay through the
5 Ω switch connection between two
TTL-compatible input levels.
Ultra low quiescent power.
-Ideally suited for noteb
Package type
•
Product code exa
Package type
Package suffix
Taping code
TSSOP-16pin
T
ELL(2000pcs / Reel)
Notes: 1. As for the is attached the “V” to the end of package code.
2. As for the Pct is attached the “–E” to the end of product code.
HD74CBT3257
Function Table
Inputs
OE
L
S
L
Function
A port = B1 port
A port = B2 port
Disconnect
L
H
X
H
H:
L:
High level
Low level
Immaterial
X:
Pin Arrangement
1
2
3
4
4
13
12
11
10
9
S
1B1
1B2
1A
4B1
4B2
4A
2B
3B1
3B2
3A
(Top view)
Rev.2, Nov. 2001, page 2 of 11
HD74CBT3257
Absolute Maximum Ratings
Item
Symbol
Ratings
−0.5 to 7.0
−0.5 to 7.0
−50
Unit
V
Conditions
Supply voltage range
Input voltage range *1
Input clamp current
Continuous output current
Continuous current through
VCC
VI
V
IIK
mA
mA
mA
VI < 0
IO
128
VO = 0 to VCC
ICC or IGND
100
VCC or GND
Maximum power dissipation
PT
500
mW
TSSOP
at Ta = 25°C (in still air) *2
Storage temperature
Tstg
−65 to 150
Notes:
The absolute maximum ratings are values which must not iceeded, and
furthermore, no two of which may be realized at the sam
1. The input and output voltage ratings may be exceedet clamp-current
ratings are observed.
2. The maximum package power dissipation was perature of 150°C.
Recommended Operating Conditions
Item
Sym
.5
5.5
5
Unit
V
Conditions
Supply voltage range
Input voltage range
Output voltage range
Input transition rise or fall
Operating free-air tem
V
V
ns / V
°C
VCC = 4.5 to 5.5 V
−40
85
Note: Unused or h or low.
Rev.2, Nov. 2001, page 3 of 11
HD74CBT3257
Block Diagram
2
4
1A
1B1
3
5
1B2
2B1
7
2A
6
2B2
3B1
11
9
3A
10
14
3B2
4B1
12
4A
13
4B2
1
S
15
OE
Rev.2, Nov. 2001, page 4 of 11
HD74CBT3257
DC Electrical Characteristics
(Ta = −40 to 85°C)
Item
Symbol
VCC (V)
Min
Typ*1
Max
−1.2
Unit
V
Test conditions
Clamp diode voltage VIK
4.5
IIN = −18 mA
Input voltage
VIH
VIL
4.0 to 5.5 2.0
V
4.0 to 5.5
4.0
0.8
20
On-state switch
resistance *2
RON
14
Ω
VIN = 2.4 V,
IIN = 15 mA
Typ at VCC = 4.0 V
4.5
4.5
4.5
5
7
VIN = 0 V,
IIN = 64 mA
5
7
= 0 V,
30 mA
10
4 V,
mA
Input current
IIN
0 to 5.5
5.5
= 5.5 V or GND
Off-state leakage
current
IOZ
0 ≤ A, B ≤ VCC
Quiescent supply
current
ICC
5.5
5.5
A
VIN = VCC or GND,
IO = 0 mA
Increase in ICC
per input *3
∆ICC
mA
One input at 3.4 V,
other inputs at VCC or
GND
Notes:
For condition shown riate values under recommended operating
conditions.
1. All typical valuerwise noted), Ta = 25°C.
2. Measured e A and B terminals at the indicated current through the
switch. ed by the lower voltage of the two (A or B) terminals.
3. This t for each input that is at the specified TTL voltage level
rat
Capacitance
(Ta = 25°C)
Item
Symbol VCC (V)
Min
Typ
Max
Unit
Test conditions
Control input
capacitance
CIN
5.0
3.5
pF
VIN = 0 or 3 V
Input / output
capacitance
A port CI/O (OFF)
B port
5.0
5.0
9
5
pF
VO = 0 or 3 V
OE = VCC
Note: This parameter is determined by device characterization is not production tested.
Rev.2, Nov. 2001, page 5 of 11
HD74CBT3257
Switching Characteristics
(Ta = −40 to 85°C)
•
VCC = 4.0 V
Test
conditions
FROM
(Input)
TO
(Output)
Item
Symbol
Min
Max
Unit
Propagation delay
time *1
tPLH
tPHL
0.35
ns
CL = 50 pF
RL = 500 Ω
A or B
B or A
Propagation delay
time
tPLH
tPHL
5.5
ns
ns
CL = 50 pF
RL = 500 Ω
S
A
Enable time
tZH
tZL
5.7
5.6
5.2
5.5
5.2
6.4
CL = 50
RL =
S
B
E
A or B
B
Disable time
tHZ
ns
A or B
B
tLZ
A or B
•
VCC = 5.0 0.5 V
ditions
FROM
(Input)
TO
(Output)
Item
Symbol
Min
Propagation delay
time *1
tPLH
tPHL
CL = 50 pF
RL = 500 Ω
A or B
B or A
Propagation delay
time
tPLH
tPH
ns
CL = 50 pF
RL = 500 Ω
S
A
Enable time
2.2
5.0
5.5
5.0
6.8
CL = 50 pF
RL = 500 Ω
S
B
OE
S
A or B
B
Disable time
ns
CL = 50 pF
RL = 500 Ω
OE
S
A or B
B
OE
A or B
Note: 1. The propagation lay is the calculated RC time constant of the typical on-state resistance of the
switch and the specified load capacitance, when driven by an ideal voltage source (zero output
impedance).
Rev.2, Nov. 2001, page 6 of 11
HD74CBT3257
Test Circuit
See under table
OPEN
GND
S1
500 Ω
*1
CL = 50 pF
500 Ω
Load circuit for outputs
Symbol
tPLH/ tPHL
tZH / tHZ
tZL / tL
S1
OP
Note: 1. CL ince.
Rev.2, Nov. 2001, page 7 of 11
HD74CBT3257
Waveforms – 1
tr
tf
3 V
90 %
1.5 V
90 %
1.5 V
Input
10 %
10 %
tPHL
GND
VOH
tPLH
1.5 V
Output
VOL
Waveforms – 2
tf
3 V
90 %
1.5 V
Output
Control
10
GND
3.5 V
tLZ
Waveform - A
Waveform - B
VOL + 0.3 V
VOH - 0.3 V
VOL
VOH
tHZ
1.5 V
GND
Notes: 1. All input pulses are supplied by generators having the following characteristics :
PRR ≤ 10 MHz, ZO = 50 Ω, tr ≤ 2.5 ns, tf ≤ 2.5 ns.
2. Waveform - A is for an output with internal conditions such that the output is low except
when disabled by the output control.
3. Waveform - B is for an output with internal conditions such that the output is high except
when disabled by the output control.
4. The output are measured one at a time with one transition per measurement.
Rev.2, Nov. 2001, page 8 of 11
HD74CBT3257
Package Dimensions
As of July, 2001
Unit: mm
5.00
5.30 Max
16
9
1
8
0.65
0.13 M
0.65 Max
1.0
+ 0.08
– 0.07
*0.ꢀꢀ
0.ꢀ0 0.06
6.40 0.ꢀ0
0.10
TTP-16DA
—
ference value)
—
0.05 g
*Dimension including the plating thickness
Base material dimension
Rev.2, Nov. 2001, page 9 of 11
HD74CBT3257
As of July, 2001
Unit: mm
5.00
5.30 Max
16
9
1
8
0.65
0.13 M
0.65 Max
1.0
*
0.20 0.05
6.40 0.20
0˚ –
0
0.10
TP-16DAV
—
—
*Pd plating
ue)
0.05 g
Rev.2, Nov. 2001, page 10 of 11
HD74CBT3257
Disclaimer
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,
copyright, trademark, or other intellectual property rights for information contained in this document.
Hitachi bears no responsibility for problems that may arise with third party’s rights, including
intellectual property rights, in connection with use of the information contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you have
received the latest product standards or specifications before final design, purchase or use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,
contact Hitachi’s sales office before using the product in an application that demands especially high
quality and reliability or where its failure or malfunction may directly threaten human life or cause risk
of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,
traffic, safety equipment or medical equipment for life support.
4. Design your application so that the product is used within the ranges by Hitachi particularly
for maximum rating, operating supply voltage range, heat radiationstallation
conditions and other characteristics. Hitachi bears no responsige when used
beyond the guaranteed ranges. Even within the guaranteed seeable
failure rates or failure modes in semiconductor devices auch as fail-
safes, so that the equipment incorporating Hitachi prory, fire or other
consequential damage due to operation of the Hita
5. This product is not designed to be radiation resi
6. No one is permitted to reproduce or duplicart of this document without
written approval from Hitachi.
7. Contact Hitachi’s sales office for any ent or Hitachi semiconductor
products.
Sales Offices
Hitachi, Ltd.
Semiconductor &
Nippon Bldg., 2-6-2, 0-0004, Japan
Tel: (03) 3270-2111 F
URL
http://www.hior.com/
For further information writ
Hitachi Semiconductor
(America) Inc.
Hitachi EuropLtd.
Hitachi Asia Ltd.
Hitachi Asia (Hong Kong) Ltd.
Group III (Electronic Components)
7/F., North Tower
Electronic Components Group
Hitachi Tower
179 East Tasman Drive Whitebrook Park
16 Collyer Quay #20-00
Singapore 049318
Tel : <65>-538-6533/538-8577
Fax : <65>-538-6933/538-3877
URL : http://semiconductor.hitachi.com.sg
San Jose,CA 95134
Lower Cookham Road
World Finance Centre,
Tel: <1> (408) 433-1990 Maidenhead
Fax: <1>(408) 433-0223 Berkshire SL6 8YA, United Kingdom
Tel: <44> (1628) 585000
Harbour City, Canton Road
Tsim Sha Tsui, Kowloon Hong Kong
Tel : <852>-(2)-735-9218
Fax : <852>-(2)-730-0281
URL : http://semiconductor.hitachi.com.hk
Fax: <44> (1628) 585200
Hitachi Asia Ltd.
(Taipei Branch Office)
4/F, No. 167, Tun Hwa North Road
Hung-Kuo Building
Taipei (105), Taiwan
Tel : <886>-(2)-2718-3666
Fax : <886>-(2)-2718-8180
Telex : 23222 HAS-TP
URL : http://www.hitachi.com.tw
Hitachi Europe GmbH
Electronic Components Group
Dornacher Straße 3
D-85622 Feldkirchen
Postfach 201, D-85619 Feldkirchen
Germany
Tel: <49> (89) 9 9180-0
Fax: <49> (89) 9 29 30 00
Copyright © Hitachi, Ltd., 2001. All rights reserved. Printed in Japan.
Colophon 5.0
Rev.2, Nov. 2001, page 11 of 11
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00295/img/page/HD74CBTS1621_1786709_files/HD74CBTS1621_1786709_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00295/img/page/HD74CBTS1621_1786709_files/HD74CBTS1621_1786709_2.jpg)
HD74CBTS16212AT
Bus Exchanger, CBT/FST/QS/5C/B Series, 1-Func, 24-Bit, True Output, CMOS, PDSO56, TSSOP-56
HITACHI
![](http://pdffile.icpdf.com/pdf2/p00266/img/page/HD74CDC2509B_1602626_files/HD74CDC2509B_1602626_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00266/img/page/HD74CDC2509B_1602626_files/HD74CDC2509B_1602626_2.jpg)
HD74CDC2509BT
PLL Based Clock Driver, CDC Series, 9 True Output(s), 0 Inverted Output(s), PDSO24, TTP-24DB
HITACHI
©2020 ICPDF网 联系我们和版权申明