EL1526IRE-T13 [RENESAS]

EL1526IRE-T13;
EL1526IRE-T13
型号: EL1526IRE-T13
厂家: RENESAS TECHNOLOGY CORP    RENESAS TECHNOLOGY CORP
描述:

EL1526IRE-T13

文件: 总2页 (文件大小:27K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
EL1526  
®
Data Sheet  
October 15, 2003  
FN7405  
Dual Channel Differential DSL Line Driver  
for Centillium Maximus CO Chipsets  
Features  
• 450mA output drive capability  
• 44.1V differential output drive into 100  
The EL1526 is to be used with  
Centillium's Maximus CO chipset for  
very high performance ADSL  
P-P  
• -85dBc THD @ 1MHz 2V  
P-P  
applications. The line driver supports use of ADSL  
downstream spectrum up to 3.75MHz, beyond traditional  
1.1MHz range. For the extended spectrum, payload rates up  
to 50Mbps is achievable in conjunction of High-Bit-Loading  
(HBL) feature of Maximus CO chipset. This feature allows  
DMT tones to carry higher than 15 bits per tone, resulting in  
higher performance ADSL services.  
• High slew rate of 500V/µs  
• Bandwidth - 46MHz  
• Current control pins  
• Channel separation  
- 80dB @ 500kHz  
- 75dB @ 1MHz  
The EL1526 is an integral part of the signal chain for HBL.  
The driver has been optimized for flat gain response and  
reduced harmonic distortion and noise in the bands of  
interest to improve the overall signal to noise in the system.  
A unique internal compensation circuit eliminates the need  
for external common mode snubber filters in active  
termination applications.  
Applications  
• ADSL line drivers for Centillium Maximus CO chipsets  
Ordering Information  
PART  
NUMBER  
TAPE &  
REEL  
PACKAGE  
24-Pin QFN  
PKG. DWG. #  
MDP0046  
MDP0046  
MDP0046  
MDP0048  
MDP0048  
MDP0048  
These drivers achieve a total harmonic distortion (THD)  
measurement of typically -64dB @ 2.2MHz, while  
consuming typically 5mA per DSL channel of total supply  
current. This supply current can be set using a resistor on  
EL1526IL  
-
EL1526IL-T7  
EL1526IL-T13  
EL1526IRE  
24-Pin QFN  
7”  
24-Pin QFN  
13”  
-
the I  
pin. Two other pins (C & C ) can also be used to  
0 1  
ADJ  
adjust supply current to one of four pre-set modes (full-I ,  
20-Pin HTSSOP  
20-Pin HTSSOP  
S
EL1526IRE-T7  
7”  
3/4-I , 1/2-I , and full power-down). The EL1526 operates  
S
S
on ±5V to ±12V supplies and retains its bandwidth and  
linearity over the complete supply range.  
EL1526IRE-T13 20-Pin HTSSOP  
13”  
The device is supplied in the small footprint (4x5mm) 24-pin  
QFN package and is specified for operation over the full  
-40°C to +85°C temperature range.  
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.  
1
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.  
Copyright © Intersil Americas Inc. 2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.  
All other trademarks mentioned are the property of their respective owners.  
EL1526  
Pinouts  
EL1526  
(24-PIN QFN)  
TOP VIEW  
EL1526  
(20-PIN HTSSOP)  
TOP VIEW  
C0AB  
C1AB  
VINA+  
VINB+  
GND  
VS-  
20  
1
2
VOUTA  
VINA-  
VINB-  
VOUTB  
VOUTC  
VINC-  
VIND-  
VOUTD  
VS+  
19  
18  
17  
16  
15  
14  
13  
12  
11  
VINA+  
VINB+  
GND  
1
2
3
4
5
6
7
19 VINA-  
18 VINB-  
17 VOUTB  
16 VOUTC  
15 VINC-  
14 VIND-  
13 VOUTD  
3
4
5
THERMAL  
PAD  
THERMAL  
PAD  
IADJ  
IADJ  
6
NC  
VINC+  
VIND+  
C1CD  
C0CD  
7
VINC+  
VIND+  
8
9
10  
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.  
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality  
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without  
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and  
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result  
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.  
For information regarding Intersil Corporation and its products, see www.intersil.com  
2

相关型号:

EL1526_05

Dual Channel Differential DSL Line Driver for Centillium Maximus CO Chipsets
INTERSIL

EL1527

Dual Channel Medium Power Differential Line Driver
INTERSIL

EL1527CRE

Dual Channel Medium Power Differential Line Driver
INTERSIL

EL1527CRE-T13

Dual Channel Medium Power Differential Line Driver
INTERSIL

EL1527CRE-T7

Dual Channel Medium Power Differential Line Driver
INTERSIL

EL1527CREZ

Dual Channel Medium Power Differential Line Driver
INTERSIL

EL1527CREZ-T7

Dual Channel Medium Power Differential Line Driver
INTERSIL

EL1527CREZT13

Dual Channel Medium Power Differential Line Driver
INTERSIL

EL1528

Dual Channel Differential DSL Line Driver
INTERSIL

EL1528CL

Dual Channel Differential DSL Line Driver
INTERSIL

EL1528CL

EL1528CL
RENESAS

EL1528CL-T13

Dual Channel Differential DSL Line Driver
INTERSIL