SM4007-T [RECTRON]
Rectifier Diode, 1 Element, 1A, 1000V V(RRM), Silicon, ROHS COMPLIANT, PLASTIC, MELF-2;
| 型号： | SM4007-T |
| 厂家： | 
RECTRON SEMICONDUCTOR |
| 描述： | Rectifier Diode, 1 Element, 1A, 1000V V(RRM), Silicon, ROHS COMPLIANT, PLASTIC, MELF-2 二极管 |
| 文件： | 总4页 (文件大小：299K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SM4001
THRU
SM4007
SURFACE MOUNT
GLASS PASSIVATED SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
FEATURES
* Glass passivated device
* Ideal for surface mounted applications
* Low leakage current
* Metallurgically bonded construction
* Mounting position: Any
* Weight: 0.015 gram
MELF
MECHANICAL DATA
* Epoxy : Device has UL flammability classification 94V-0
.205 ( 5.2 )
.190 ( 4.8 )
SOLDERABLE
ENDS
DISCONTINUED-
"This series is replaced by the FM400X series that meets to the same
fit and function parameters and share the same solder pad layout.
The FM400X series is preferred for error-free vacuum pick-up and
PCB assembly."
.024 ( 0.6 )
.016 ( 0.4 )
.106 ( 2.7 )
.095 ( 2.4 )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25OC ambient temperature unless otherwise specfied.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
O
MAXIMUM RATINGS (@ T
A
=25 C unless otherwise noted)
SYMBOL
SM4001
50
SM4002
100
SM4003
200
SM4004
400
SM4005
600
SM4006
800
SM4007 UNITS
RATINGS
VRRM
VRMS
VDC
1000
700
Volts
Volts
Volts
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
35
70
140
280
420
560
50
100
200
400
600
Maximum DC Blocking Voltage
800
1000
Maximum Average Forward Rectified Current
at Ambient Temperature
IO
1.0
30
Amps
Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
Typical Thermal Resistance (Note 1)
Typical Thermal Resistance (Note 1)
Typical Junction Capacitance (Note 2)
Operating Temperature Range
R
R
50
20
0C/W
0C/W
pF
θ
θ
J A
J C
CJ
TJ
15
0 C
150
Storage Temperature Range
TSTG
-55 to + 150
0 C
O
ELECTRICAL CHARACTERISTICS(@T
A
=25 C unless otherwise noted)
CHARACTERISTICS
SYMBOL
VF
SM4001
SM4002
SM4003
SM4004
1.1
SM4005
SM4006
SM4007 UNITS
Maximum Instantaneous Forward Voltage at 1.0A DC
Volts
uA
@TA = 25oC
Maximum Average Reverse Current
5.0
IR
at Rated DC Blocking Voltage
@TA = 100oC
100
uA
2007-3
NOTES : 1. Thermal Resistance :Mounted on PCB.
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
3. "Fully ROHS compliant","100% Sn plating (Pb-free)".
RATING AND CHARACTERISTICS CURVES ( SM4001 THRU SM4007 )
1000
100
10
2.0
1.5
1.0
T
= 100 OC
A
T
= 75 OC
A
T
= 25 OC
A
1.0
Single Phase Half Wave 60Hz
Resistive or Inductive Load
0.375" (9.5mm) Lead Length
0.5
0
0.1
0.01
0
20
40
60
80
100
120
140
0
25
50
75
100
125
150
175
AMBIENT TEMPERATURE, (OC)
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
FIG.2 TYPICAL REVERSE
FIG.1 TYPICAL FORWARD CURRENT
DERATING CURVE
CHARACTERISTICS
20
10
40
20
T
= 25 OC
J
10
8
6
1.0
0.1
4
T
= 25 OC
2
1
J
Pulse width=300
1% Duty Cycle
S
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0 4.5
5.0
0.1
0.4
1.0
4
10
40 80
INSTANTANEOUS FORWARD VOLTAGE, (V)
REVERSE VOLTAGE, (V)
FIG.3 TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
FIG.4 TYPICAL JUNCTION CAPACITANCE
30
8.3mS Single Half Sine-Wave
JEDEC Method
25
20
15
10
0
1
2
4
6
8
10
20
40
80 100
NUMBER OF CYCLES AT 60Hz
FIG.5 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
Mounting Pad Layout
F-SLOT WIDTH
OPTIMUM PAD SIZE
.100 (2.54)
.100 (2.54)
.100 (2.54)
.200 (5.08)
.300 (7.62)
Dimensions in inches and (millimeters)
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
相关型号：
©2020 ICPDF网 联系我们和版权申明