R-78HB-W [RECOM]
0.5 AMP SIP3 Wired Single Output;![R-78HB-W](http://pdffile.icpdf.com/pdf2/p00333/img/icpdf/R-78HB-W_2051232_icpdf.jpg)
型号: | R-78HB-W |
厂家: | ![]() |
描述: | 0.5 AMP SIP3 Wired Single Output |
文件: | 总4页 (文件大小:470K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
• Efficiency up to 93%, no need for heatsinks
• High voltage input range, up to 50V
• Short Circuit Protection, Thermal Shutdown
• All-in-one solution, no external components
required
Features
DC/DC Converter
Switching
Regulator
R-78HB/W
0.5 AMP
SIP3 Wired
Description
The R-78HBxx/W-Series high efficiency, high input voltage switching regulators are ideally suited to
replace 78xx linear regulators. The efficiency of up to 93% means that very little energy is wasted as
heat so there is no need for any heat sinks with their additional space and mounting costs. A wide
input voltage range allows the full stored energy utilization of standard 12, 24 and 36V batteries as
well as COB LED drivers. No external components are required to make a complete regulated, short-
circuit protected supply. A built-in protection diode allows high capacitive loads. Typical applications
include Auxiliary fan CV power supplies powered from CC LED drivers, industrial, aerospace and battery
powered applications.
Single Output
Selection Guide
Part
Number
Input
Voltage Range(2)
(VDC)
Output
Voltage
(VDC)
5.0
Output
Current
(A)
0.5
0.5
Efficiency
typ @ min Vin.
Max. Capacitive
Load (1)
(%)
86
93
(µF)
100/6800
100/6800
R-78HB5.0-0.5/W
R-78HB12-0.5/W
9-72
17-72
12
Notes:
Note1:
with normal start-up time an no external components = 100µF
with <1S start-up time = 6800µF
Specifications (measured at T = 25°C, full load, nominal input voltage and after warm-up)
A
BASIC CHARACTERISTICS
Parameter
Condition
Min.
Typ.
Max.
5Vout
12Vout
9VDC
17VDC
48VDC
48VDC
72VDC
72VDC
Input Voltage Range(2)
Short Circuit Input Current
Quiescent Current
15mA
25mA
5mA
Vin = 48VDC, 10% load
full load
1mA
120kHz
10mA
Internal Power Dissipation
Operating Frequency Range
Efficiency
0.65W
800kHz
IEC60950-1 Certified
EN60950-1 Certified
EN55022 Certified
see Selection Guide
Minimum Load (3)
20mVp-p 60mVp-p
Output Ripple and Noise
Typical Application Circuit
+VIN
R-78HBxx-0.5/W
+VOUT
3.3µF/100V
required if
VIN= >50V
-VIN
-VOUT
Notes:
Note2: The converter has built in soft start circuit. Rapidly changing the input voltage from VINmin to VIN
can bypass this circuit and damage the converter.
max
Note3: Operation under no load will not damage the devices, however they may not meet all specifications.
A minimum load of 10mA is recommended.
continued on next page
www.recom-power.com
REV.: 1/2016
I-1
R-78HB/W
DC/DC Converter
Series
Specifications (measured at T = 25°C, full load, nominal input voltage and after warm-up)
A
Efficiency vs. Load
R-78HB5.0-0.5/W
R-78HB12-0.5/W
100
96
92
88
84
100
96
92
88
84
24Vin
36Vin
48Vin
12Vin
24Vin
36Vin
48Vin
0
0.1
0.2
0.3
0.4
0.5
0.6
0
0.1
0.2
0.3
0.4
0.5
0.6
Output Current (A)
Output Current (A)
REGULATIONS
Parameter
Condition
Value
Output Voltage Accuracy
Line Voltage Regulation
Load Voltage Regulation
Dynamic Load Stability
100% load
2% typ. / 3% max.
0.4% typ. / 1% max.
0.3% typ. / 0.6% max.
Vin= min. to max., full load
10% to 100% load
with 100µF output Capacitor, 100% <-> 50% load
75mV typ. / 100mV max.
PROTECTIONS
Parameter
Internal Input Filter
Short Circuit Protection (SCP)
Condition
internal structure
Controller
Value
1µF Cpacaitor
continuous, automatic recovery
Optional Protection Circuit
+VIN
GND
+VOUT
GND
I-2
REV.: 1/2016
www.recom-power.com
R-78HB/W
DC/DC Converter
Series
Specifications (measured at T = 25°C, full load, nominal input voltage and after warm-up)
A
ENVIRONMENTAL
Parameter
Condition
with derating (see graph)
Value
-40°C to +85°C
+100°C
Operating Temperature Range
Maximum Case Temperature
Case Thermal Impedance
55°C/W
MIL-HDBK 217F, +25°C
MIL-HDBK 217F, +71°C
7395 x 103 hours
1242 x 10³ hours
MTBF
Derating Graph
100
80
60
40
20
0
-40 -20
0
20
40 60
80 100
Ambient Temperature7(1°C8)5
SAFETY AND CERTIFICATIONS
Certificate Type
Report / File Number
Standard
IEC/EN General Safety
SPCLVD1407030-1
IEC/EN-60950-1, 2nd Edition
EMI Compliance
EMC Conducted and Radiated
ESD
Condition
Standard / Criterion
EN55022, Class B
EN61000-4-2, Criteria A
DIMENSION and PHYSICAL CHARACTERISTICS
Parameter
Type
Value
non-conductive black plastic (UL94V-0)
epoxy (UL94V-0)
Case Material
Potting Material
Package Dimension (LxWxH)
Package Weight
12.1 x 9.7 x 24.0mm
4.5g
continued on next page
REV.: 1/2016
www.recom-power.com
I-3
R-78HB/W
DC/DC Converter
Series
Specifications (measured at T = 25°C, full load, nominal input voltage and after warm-up)
A
Dimension Drawing (mm)
12.1
embossed logo
Top View
9.7
R-78HB/W
Connection
Wired Color
1, red
2, black
Type
Wire Composition Function
Marking
UL-1430, AWG22
UL-1430, AWG22
UL-1430, AWG22
17/0.16
17/0.16
17/0.16
+Vin
GND
+Vout
3, brown
xxxx
1 2 3
Tolerance: xx.x=
0.5mm
0.51
xx.xx= 0.35mm
Wire Composition
insulation
Ø1.56
Bottom View
wire
Ø0.76
APPLICATION
Standard Application
18V
LED Driver
Ιout
ΙLED
1050mA
980mA
Constan Current
AC
DC
ΙR-78
70mA
12V/100mA
ΙFAN
R-78HB12/W
FAN
Constan Voltage
PACKAGING INFORMATION
Packaging Dimension (LxWxH)
Packaging Quantity
cardboard box
140.0 x 130.0 x 65.0mm
25pcs
Storage Termperature Range
Storage Humidity
-55°C to +125°C
95%, RH max.
non-condensing
The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written
consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer
shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.
I-4
REV.: 1/2016
www.recom-power.com
相关型号:
©2020 ICPDF网 联系我们和版权申明