TQP9109-PCB2140 [QORVO]
1/2 W 2-stage Linear Amplifier;型号: | TQP9109-PCB2140 |
厂家: | Qorvo |
描述: | 1/2 W 2-stage Linear Amplifier |
文件: | 总11页 (文件大小:712K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TQP9109
1/2 W 2-stage Linear Amplifier
®
Product Description
The TQP9109 is a high efficiency two-stage driver
amplifier in a low-cost surface-mount package. The
amplifier is able to achieve high performance with +46 dBm
OIP3 and +27.5 dBm P1dB while only consuming 245 mA
current. The linear amplifier integrates two high
performance amplifier stages onto a module to allow for a
compact system design. The input is internally matched
and the amplifier only requires minimal external
components for operation. The integrated interstage match
minimizes performance variation that would otherwise be
attributed to external matching component value and
placement tolerances.
4x4 mm Leadless SMT Package
Key Features
• 1.7ꢀ–ꢀ2.7 GHz Frequency Range
• 30.5 dB gain
The output stage amplifier is bias adjustable allowing the
amplifier’s power consumption to be reduced for occasions
when the high power performance is not required. The
output stage can also be turned off when not being used for
power savings. The output match is tunable externally to
allow the amplifier to be optimized for high power or high
linearity applications. Up to 46 dBm OIP3 can be achieved
when optimized for linearity. The TQP9109 is available in
a RoHS-compliant 20-pin 4x4mm surface mount package.
• +27.5 dBm P1dB
• +46 dBm Output IP3
• Input Internally Matched
• Integrated interstage matching
• Power down functionality for second stage amp
• Bias Adjustable
Functional Block Diagram
Applications
Pin 1
Reference Mark
Package Topside
• Wireless Infrastructure
• Repeaters, Boosters, DAS
• High Power Amplifiers
NC
RFin
RFin
RFin
NC
NC
1
2
3
4
5
15
14
13
12
11
• Pico and Macro Basestations
RFout
RFout
RFout
NC
Exposed
Backside Pad
GND
Ordering Information
Part No.
Description
Top View
TQP9109
2,500 pieces on a 13” reel (standard)
1.8 − 2.2 GHz Evaluation Board
2.3 − 2.7 GHz Evaluation Board
TQP9109-PCB2140
TQP9109-PCB2600
Datasheet, January 30, 2018 | Subject to change without notice
- 1 of 11 -
www.qorvo.com
TQP9109
1/2 W 2-stage Linear Amplifier
®
Absolute Maximum Ratings
Recommended Operating Conditions
Parameter
Rating
−50 to +150ꢀ°C
+8 dBm
Parameter
Min
+4.75
−40
Typ
Max Units
Storage Temperature
RF Input Power, CW, 50Ω, T=+25ꢀ°C
Supply Voltage (VCC1, VCC2
)
+5
+5.25
+105
+170
V
TCASE
°C
°C
Tj for >106 hours MTTF
Supply Voltage (VCC1, VCC2
)
+6 V
Exceeding any one or a combination of the Absolute Maximum Rating
conditions may cause permanent damage to the device. Extended
application of Absolute Maximum Rating conditions to the device may
reduce device reliability.
Electrical specifications are measured at specified test conditions.
Specifications are not guaranteed over all recommended operating
conditions.
Electrical Specifications
Test conditions unless otherwise noted: Supply Voltage =+5ꢀV, ICQ = 237 mA, IREF = 8 mA, TCASE = +25ꢀ°C
Parameter
Frequency Range
Test Frequency
Gain
Conditions
Min
1700
Typ
Max
2700
Units
MHz
MHz
dB
2140
29.9
11
27.5
32.5
Input Return Loss
Output Return Loss
Output P1dB
dB
14
dB
+25.0
+41.0
+27.9
+45.8
3.5
dBm
dBm
dB
Output IP3
Pout= +11 dBm/tone, Δf=1 MHz
Noise Figure
Total Current
Current, ICQ1
ICQ1 + ICQ2 + IREF
210
239
89
280
mA
mA
Current, ICQ2
150
8
mA
Current, IREF
mA
Thermal Resistance, θjc
Module (junction to case)
36.2
°C/W
Datasheet, January 30, 2018 | Subject to change without notice
- 2 of 11 -
www.qorvo.com
TQP9109
1/2 W 2-stage Linear Amplifier
®
Evaluation Board – TQP9109-PCB2140
J3
C7
Vcc
10 uF
C1
R1
B1
0
0
0.1 uF
C5
0.1uF
C2
C15
0.1uF
L1
L2
1000 pF
10 nH
18 nH
1
2
3
4
5
15
14
13
12
11
C11
C3
J2
C9
J1
RF
Input
RF
10
10 pF
100 pF
Output
Z4
Z1
0.5 pF
2.2 pF
L3
0
C13
0.1uF
R7
316
J4
Vpd
C7
J3
C15
L1
C5
C2
L2
J1
C11
C9
C3
J2
U1
J4
J6
C13
Bill of Material – TQP9109-PCB2140
Ref Des
U1
Value Description
Manuf.
Qorvo
Part Number
TQP9109
AMP, 4x4mm SMT Module, 2-stage, Linear
CAP, 0603,10%, 50V, X7R
CAP, 0603, 5%, 50V, NPO
CAP, 0603, 5%, 50V, NPO
CAP, 0402, +/-0.1pF, 50V, NPO/COG
RES, 0603, 1%, 1/16W, Chip
CAP, 0402, +/- 0.1pF. 50V, NPO
CAP, 6032, 20%, 50V, Tantalum
CAP, 0603, +/-1%, 200V, NPO/COG
RES, 0603
C1, C5, C13, C15
0.1 uF
1000 pF
100 pF
0.5 pF
10 Ω
various
various
various
AVX
C2
C3
Z1
04025A0R5BAT2A
04025U2R2BAT2A
06032U100FAT2A
C9
various
AVX
Z4
2.2 pF
10 uF
C7
various
AVX
C11
R7
10 pF
316 Ω
0 Ω
various
various
Coilcraft
Coilcraft
B1, L3, R1
L1
RES, 0603, 5%, 1/16W, Chip
IND, 1008, 5%, Ceramic
10 nH
18 nH
1008CS-100XJL
0805CS-180XJL
L2
IND, 0805, 5%, Ceramic
Datasheet, January 30, 2018 | Subject to change without notice
- 3 of 11 -
www.qorvo.com
TQP9109
1/2 W 2-stage Linear Amplifier
®
Typical Performance – TQP9109−PCB2140
Test conditions unless otherwise noted: VCCꢀ=ꢀ+5ꢀV, ITOTALꢀ=ꢀ245ꢀmA (typ.), Vpd = +5 V, Temp.ꢀ=ꢀ+25ꢀ°C
Units
MHz
dB
Parameter
Frequency
Conditions
Typical Value
1800
30.4
12
1960
31.0
12
2140
30.5
12
Gain
Input Return Loss
Output Return Loss
dB
16
20
14
dB
Output P1dB
OIP3
+28.5
+42
3.5
+28.2
+42.5
3.5
+27.5
+46
3.5
dBm
dBm
dB
Pout= +11 dBm/tone, Δf=1 MHz
Noise Figure
Performance Plots – TQP9109-PCB2140
Test conditions unless otherwise noted: VCCꢀ=ꢀ+5ꢀV, ITOTALꢀ=ꢀ245ꢀmA (typ.), Temp.ꢀ=ꢀ+25ꢀ°C
Gain vs. Frequency
Input Return Loss vs. Frequency
Output Return Loss vs. Frequency
33
31
29
27
0
-5
0
-5
+105°C
+85°C
+25°C
−40°C
+105°C
+85°C
+25°C
−40°C
-10
-15
-20
-25
-10
-15
-20
+105°C
+85°C
+25°C
−40°C
1800
1900
2000
2100
2200
1800
1900
2000
2100
2200
1800
1900
2000
2100
2200
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Output P1dB vs. Frequency
OIP3 vs. Pout
30
28
26
24
50
45
40
35
30
Temp.=+25°C
+105°C
+85°C
+25°C
−40°C
F = 1800 MHz
F = 1900 MHz
F = 2000 MHz
F = 2100 MHz
F = 2200 MHz
1800
1900
2000
2100
2200
8
9
10
11
12
13
14
15
Frequency (MHz)
Pout (dBm/tone)
Noise Figure vs. Frequency
ACLR vs. Pout
5
4
3
2
1
0
-40
-45
-50
-55
-60
-65
-70
-75
Temp.=+25°C
Signal : LTE 20MHz, PAR = 8.5dB
Channel BW E-UTRA, IBW = 18.02MHz
2140 MHz
1960 MHz
1840 MHz
+105°C
+85°C
+25°C
−40°C
1800
1900
2000
2100
2200
0
2
4
6
8
10
12
14
16
18
20
Frequency (MHz)
Pout (dBm)
Datasheet, January 30, 2018 | Subject to change without notice
- 4 of 11 -
www.qorvo.com
TQP9109
1/2 W 2-stage Linear Amplifier
®
Evaluation Board – TQP9109-PCB2600
J3
C7
Vcc
10 uF
C1
R1
B1
0
0
0.1 uF
C5
0.1uF
C2
C15
0.1uF
L1
L2
1000 pF
10 nH
18 nH
1
15
14
13
12
11
2
C11
C3
Z3
C9
Z5
J1
J2
3
4
5
1.0 nH
RF
Input
RF
0
15
8.2 pF
100 pF
Output
Z1
Z2
2.2 pF
Z4
0.5 pF
1.0 pF
L3
0
C13
0.1uF
R7
316
J4
Vpd
C7
J3
C15
L1
C5
C2
L2
J1
C11
C9
Z5
Z3
C3
J2
U1
J4
J6
C13
Bill of Material – TQP9109-PCB2600
Ref Des
Value Description
Manuf.
Qorvo
various
various
various
AVX
various
AVX
TOKO
various
AVX
Part Number
U1
AMP, 4x4mm SMT Module, 2-stage, Linear
CAP, 0603,10%, 50V, X7R
CAP, 0603, 5%, 50V, NPO
TQP9109
C1, C5, C13, C15
C2
C3
Z1
Z5
Z2
Z3
C7
Z4
C11
R7
B1, L3, R1, C9
L1
L2
0.1 uF
1000 pF
100 pF
0.5 pF
15 Ω
CAP, 0603, 5%, 50V, NPO
CAP, 0402, +/-0.1pF, 50V, NPO/COG
RES, 0402, 5%, 1/16W, Chip
CAP, 0402, +/- 0.1pF, 50V, NPO
IND, 0402, +/-0.3 nH
04025A0R5BAT2A
2.2 pF
1 nH
04025U2R2BAT2A
LL1005-FHL1NOS
10 uF
1 pF
8.2 pF
316 Ω
0 Ω
CAP, 6032, 20%, 50V, Tantalum
CAP, 0402, +/- 0.1pF, 50V, NPO/COG
CAP, 0603, +/-0.1pF, 200V, NPO/COG
RES, 0603
RES, 0603, 5%, 1/16W, Chip
IND, 1008, 5%, Ceramic
04025A1R0BAT2A
06032U8R2BAT2A
AVX
various
various
Coilcraft
Coilcraft
10 nH
18 nH
1008CS-100XJL
0805CS-180XJL
IND, 0805, 5%, Ceramic
Datasheet, January 30, 2018 | Subject to change without notice
- 5 of 11 -
www.qorvo.com
TQP9109
1/2 W 2-stage Linear Amplifier
®
Typical Performance – TQP9109−PCB2600
Test conditions unless otherwise noted: VCCꢀ=ꢀ+5ꢀV, ITOTALꢀ=ꢀ245ꢀmA (typ.), Vpd = +5 V, Temp.ꢀ=ꢀ+25ꢀ°C
Units
MHz
dB
Parameter
Frequency
Conditions
Typical Value
2300
30.3
11
2500
29.9
17
2700
30.0
14
Gain
Input Return Loss
Output Return Loss
Output P1dB
OIP3
dB
18
12
5.7
dB
+28.0
+44
4.0
+27.6
+42.5
4.0
+27.3
+44
4.1
dBm
dBm
dB
Pout= +11 dBm/tone, Δf=1 MHz
Noise Figure
Performance Plots – TQP9109-PCB2600
Test conditions unless otherwise noted: VCCꢀ=ꢀ+5ꢀV, ICQꢀ=ꢀ245ꢀmA (typ.), Temp.ꢀ=ꢀ+25ꢀ°C
Gain vs. Frequency
Input Return Loss vs. Frequency
Output Return Loss vs. Frequency
32
30
28
26
0
-5
0
-5
+105°C
+85°C
+25°C
−40°C
+105°C
+85°C
+25°C
−40°C
-10
-15
-20
-10
-15
-20
+105°C
+85°C
+25°C
−40°C
2300
2400
2500
2600
2700
2300
2400
2500
2600
2700
2300
2400
2500
2600
2700
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Output P1dB vs. Frequency
OIP3 vs. Pout
Noise Figure vs. Frequency
30
28
26
24
22
50
45
40
35
30
6
5
4
3
2
1
0
Temp.=+25°C
+105°C
+85°C
+25°C
−40°C
+105°
+85°C
+25°C
−40°C
F = 2300 MHz
F = 2400 MHz
F = 2500 MHz
F = 2600 MHz
F = 2700 MHz
2300
2400
2500
2600
2700
8
9
10
11
12
13
14
15
2300
2400
2500
2600
2700
Frequency (MHz)
Pout (dBm/tone)
Frequency (MHz)
ACLR vs. Pout
-40
-45
-50
-55
-60
-65
-70
-75
Temp.=+25°C
Signal : LTE 20MHz, PAR = 8.5dB
Channel BW E-UTRA, IBW = 18.02MHz
2700 MHz
2600 MHz
2500 MHz
0
2
4
6
8
10
12
14
16
18
20
Pout (dBm)
Datasheet, January 30, 2018 | Subject to change without notice
- 6 of 11 -
www.qorvo.com
TQP9109
1/2 W 2-stage Linear Amplifier
®
Evaluation Board – TQP9109 – 1700 to 2700 MHz
J3
C7
Vcc
10 uF
C1
R1
B1
0
0
0.1 uF
C5
0.1uF
C2
C15
0.1uF
L1
L2
1000 pF
10 nH
18 nH
1
2
3
4
5
15
14
13
12
11
C11
C3
Z3
C9
Z5
J1
J2
1.0 nH
RF
Input
RF
0
15
27 pF
100 pF
Output
Z1
Z2
2.2 pF
Z4
0.3 pF
1.0 pF
L3
0
C13
0.1uF
R7
316
J4
Vpd
C7
C15
J3
L1
C5
C2
L2
J1
C11
C9
Z5
Z3
C3
J2
U1
J4
J6
C13
Bill of Material – TQP9109 – 1700 to 2700 MHz
Ref Des
Value Description
Manuf.
Qorvo
Part Number
U1
AMP, 4x4mm SMT Module, 2-stage, Linear
CAP, 0603,10%, 50V, X7R
TQP9109
C1, C5, C13, C15
C2
C3
Z1
Z5
Z2
Z3
0.1 uF
1000 pF
100 pF
0.3 pF
15 Ω
various
various
various
various
various
AVX
CAP, 0603, 5%, 50V, NPO
CAP, 0603, 5%, 50V, NPO
CAP, 0402, +/-0.1PF. 50V. NPO/COG
RES, 0402, 5PCT. 1/16W. CHIP.
CAP, 0402, +/- 0.1PF. 50V. NPO
IND, 0402, chip, +/-0.3 nH
2.2 pF
1 nH
04025U2R2BAT2A
LL1005-FHL1NOS
TOKO
C7
Z4
C11
R7
B1, L3, R1, C9
L1
L2
10 uF
1 pF
27 pF
316 Ω
0 Ω
CAP, 6032, 20%, 50V, Tantalum
CAP, 0402, +/- 0.1PF. 50V. NPO/COG
CAP, 0603, +/-0.1PF. 200V. NPO/COG
RES, 0603
RES, 0603, 5%, 1/16W, Chip
IND, 1008, 5%, Ceramic
various
AVX
04025A1R0BAT2A
various
various
various
Coilcraft
Coilcraft
10 nH
18 nH
1008CS-100XJL
0805CS-180XJL
IND, 0805, 5%, Ceramic
Datasheet, January 30, 2018 | Subject to change without notice
- 7 of 11 -
www.qorvo.com
TQP9109
1/2 W 2-stage Linear Amplifier
®
Typical Performance – TQP9109 – 1700 to 2700 MHz
Test conditions unless otherwise noted: VCCꢀ=ꢀ+5ꢀV, ITOTALꢀ=ꢀ245ꢀmA (typ.), Vpd = +5 V, Temp.ꢀ=ꢀ+25ꢀ°C
Units
MHz
dB
Parameter
Frequency
Conditions
Typical Value
1700
28.0
16
2200
29.7
11
2700
29.6
16
Gain
Input Return Loss
Output Return Loss
Output P1dB
OIP3
dB
11
15
7.3
dB
+30.2
+40
+29.9
+40.5
+27.9
+41.6
dBm
dBm
Pout= +16 dBm/tone, Δf=1 MHz
Performance Plots – TQP9109 – 1700 to 2700 MHz
Test conditions unless otherwise noted: VCCꢀ=ꢀ+5ꢀV, ICQꢀ=ꢀ245ꢀmA (typ.), Temp.ꢀ=ꢀ+25ꢀ°C
Gain vs. Frequency
Input Return Loss vs. Frequency
Output Return Loss vs. Frequency
31
29
27
25
23
0
-5
0
-5
Temp.=+25°C
Temp.=+25°C
Temp.=+25°C
-10
-15
-20
-10
-15
-20
1700
1900
2100
2300
2500
2700
1700
1900
2100
2300
2500
2700
1700
1900
2100
2300
2500
2700
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
OIP3 vs Frequency
P1dB vs Frequency
50
45
40
35
30
31
30
29
28
27
26
Temp.=+25°C
Temp.=+25°C
1700
1900
2100
2300
2500
2700
1700
1900
2100
2300
2500
2700
Frequency (MHz)
Frequency (MHz)
Datasheet, January 30, 2018 | Subject to change without notice
- 8 of 11 -
www.qorvo.com
TQP9109
1/2 W 2-stage Linear Amplifier
®
Pin Configuration and Description
Pin 1
Reference Mark
Package Topside
NC
RFin
RFin
RFin
NC
NC
1
2
3
4
5
15
14
13
12
11
RFout
RFout
RFout
NC
Exposed
Backside Pad
GND
Top View
RF Input pins. Requires DC blocking.
Pin No.
2, 3, 4
Label
RF Input
IREF
Description
8
Sets the bias current for Amp2. Also can be used to power down.
RF output pins. Require DC blocking and RF match for optimal performance.
2nd Stage DC voltage supply connection.
12, 13, 14
RF Output
VCC2
18
20
VCC1
1st Stage DC voltage supply connection.
1, 5, 6, 7, 9, 10, 11,
15, 16, 17, 19
N/C
No internal connection. Provide grounded land pads for PCB mounting integrity.
RF/DC ground. Use recommended via hole pattern to minimize inductance and
thermal resistance; see PCB Mounting Pattern for suggested footprint.
Backside Pad
GND
Datasheet, January 30, 2018 | Subject to change without notice
- 9 of 11 -
www.qorvo.com
TQP9109
1/2 W 2-stage Linear Amplifier
®
Package Marking and Dimensions
Marking: Part number – TQP9109
Date - YYWW
Lot code – AaXXXX
TQP9109
YYWW
AaXXXX
TOP
VIEW
SIDE
VIEW
(1X) shape
0.10
C A B
BOTTOM
VIEW
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Dimension and tolerance formats conform to ASME Y14.4M-1994.
3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.
Datasheet, January 30, 2018 | Subject to change without notice
- 10 of 11 -
www.qorvo.com
TQP9109
1/2 W 2-stage Linear Amplifier
®
Handling Precautions
Parameter
Rating
Standard
ESDꢁ–ꢁHuman Body Model (HBM)
Class 1B
ESDAꢀ/ꢀJEDEC JS-001-2012
JEDEC JESD22-C101F
IPC/JEDEC J-STD-020
Caution!
ESD-Sensitive Device
ESDꢁ–ꢁCharged Device Model (CDM) Class C3
MSLꢁ–ꢁMoisture Sensitivity Level
Level 3
Solderability
Compatible with both lead-free (260°C max. reflow temp.) and tin/lead (245°C max. reflow temp.) soldering processes.
Solder profiles available upon request.
Contact plating: Electrolytic plated Au over Ni
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU. This product also has the following attributes:
• Product uses RoHS Exemption 7c-I to meet RoHS Compliance requirements
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• PFOS Free
• SVHC Free
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
For technical questions and application information:
Email: appsupport@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2018 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Datasheet, January 30, 2018 | Subject to change without notice
- 11 of 11 -
www.qorvo.com
相关型号:
©2020 ICPDF网 联系我们和版权申明