QPQ1060 [QORVO]
L1 Low Loss GPS SAW Filter;型号: | QPQ1060 |
厂家: | Qorvo |
描述: | L1 Low Loss GPS SAW Filter 全球定位系统 |
文件: | 总7页 (文件大小:479K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
QPQ1060
L1 Low Loss GPS SAW Filter
®
General Description
QPQ1060 is a L1 GPS Band Pass Filter in a compact size
for use in any GPS application. Designed for rejection of
unwanted GPS signals, this SAW filter also has excellent
power handling capability for low power transmitters.
Housed in a 1.4 x 1.2 mm laminate with over mold
package, this device allows for a compact and cost-
effective diplexer solution for GPS applications.
No matching components are required, making the PCB
design and implementation easy.
1.4 X 1.2 X 0.84 mm
Product Features
•
Usable bandwidth 31 MHz
•
•
•
•
•
No matching required for operation at 50Ω
Excellent rejection for GPS operation
Functional Block Diagram
High Isolation
High Rejection
Laminate with Over Mold Surface Mount Package
(SMP)
•
Small Size: 1.4 x 1.2 x 0.84mm
Performance is typical across frequency. Please
reference electrical specification table and data plots
for more details.
Applications
• General purpose GPS
Top View
• Communication Systems
Pin Configuration - Single Ended
Pin No. Label
1
Antenna Input (¹)
2, 3, 5
Ground
4
L1 Output (¹)
Ordering Information
( )
¹ Blocking capacitors are required on any ports where a DC
voltage may be present.
Part No.
Description
QPQ1060TR7
7” Taped Reel with 2500 pieces
QPQ1060EVB
Evaluation board
Data Sheet Rev F, Jan. 10, 2022 | Subject to change without notice
1 of 7
www.qorvo.com
QPQ1060
L1 Low Loss GPS SAW Filter
®
Absolute Maximum Ratings
Minimum Lifetime Ratings
Parameter
Rating
Conditions
Rating
Storage Temperature
-40 to 125°C
RF Input Power (¹),
@ Pin 1 (Antenna Port),
@ Pin 4 (L1 Port)
>10 years @ +95C
Operation Temperature
-55 to 105°C
>5 years @ +105C
RF Input Power (¹) - Test conditions:
PW = 200ms; DC = 50% @ +25ꢀ°C
33 dBm
( )
¹ Input Power: CW, 25 dBm
Exceeding any one or a combination of the Absolute Maximum
Rating conditions may cause permanent damage to the device.
Extended application of Absolute Maximum Rating conditions to
the device may reduce device reliability.
( )
¹ Input Power for both Input & Output ports
Electrical Specifications (1,2)
L1 Band GPS
Conditions
Parameter (3)
Min
Typical (4)
Max Units
Center Frequency
1559.92 - 1590.92 MHz
1559.92 - 1590.92 MHz
1563.42 - 1587.42 MHz
1565.42 - 1585.42 MHz
1559.92 - 1590.92 MHz
1563.42 - 1587.42 MHz
1565.42 - 1585.42 MHz
1559.92 - 1590.92 MHz
1563.42 - 1587.42 MHz
1565.42 - 1585.42 MHz
10 - 1505.42 MHz
-
-
1575.42
1.4
1.3
1.2
0.4
0.3
0.2
19
-
MHz
2.0
Maximum Insertion Loss
Amplitude Variation
-
-
-
-
-
-
-
-
40
44
10
-
-
10
-
-
dB
-
0.7
-
-
dB
33
-
-
-
-
15
14
42
46
15
15
15
14
Group Delay Variation
ns
dB
dB
Absolute Attenuation
(Relative to 0 dB)
1645.42ꢁ-ꢁ2500 MHz
1559.92 - 1590.92 MHz
1563.42 - 1587.42 MHz
1565.42 - 1585.42 MHz
1559.92 - 1590.92 MHz
1563.42 - 1587.42 MHz
1565.42 - 1585.42 MHz
Single Ended
-
-
Input Return Loss
-
-
dB
Output Return Loss
14
14
50
-
-
-
-
Nominal Impedance (5)
-
Ohm
Notes:
1. All specifications are based on the Qorvo schematics for the reference designs shown on page 3.
2. In production, devices will be tested at room temperature to a guard banded specification to ensure electrical compliance
over temperature.
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacture
tolerances.
4. Typical values are based on average measurements at room temperature on pcb. (25ꢁ°C ±5ꢁ°C)
5. Optimum impedance to achieve the performance shown.
Data Sheet Rev F, Jan. 10, 2022 | Subject to change without notice
2 of 7
www.qorvo.com
QPQ1060
L1 Low Loss GPS SAW Filter
®
Evaluation Board – QPQ1060-EVB
Notes: Blocking capacitors are required on any RF ports where a DC voltage may be present.
Bill of Material – QPQ1060-EVB
Reference Des.
Value
Description
Manuf.
Qorvo
Part Number
DUT
SMA
PCB
-
-
-
L1 Low Loss GPS SAW Filter
SMA connector
QPQ1060
Various
Various
Printed Circuit Board
Data Sheet Rev F, Jan. 10, 2022 | Subject to change without notice
3 of 7
www.qorvo.com
QPQ1060
L1 Low Loss GPS SAW Filter
®
Typical Performances
Test conditions unless otherwise noted: Tempꢁ=ꢁ+25ꢁ°C, 50ꢁΩ system
Data Sheet Rev F, Jan. 10, 2022 | Subject to change without notice
4 of 7
www.qorvo.com
QPQ1060
L1 Low Loss GPS SAW Filter
®
Package Marking and Dimensions
Marking: Qorvo Logo
Part Number – 1060
Trace Code –ꢁAssigned by subcontractor
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012
PCB Mounting Pattern
Notes:
1. All dimensions are in millimeters. Angles are in degrees. .
Data Sheet Rev F, Jan. 10, 2022 | Subject to change without notice
5 of 7
www.qorvo.com
QPQ1060
L1 Low Loss GPS SAW Filter
®
Assembly Notes
1. Compatible with both Lead-free solder (260°C peak reflow temperature) and tin/lead (245°C peak reflow temp.)
soldering processes.
2. Contact plating: ENEPIG
Recommended Soldering Profile
Data Sheet Rev F, Jan. 10, 2022 | Subject to change without notice
6 of 7
www.qorvo.com
QPQ1060
L1 Low Loss GPS SAW Filter
®
Handling Precautions
Parameter
Rating
Class 3A ESDAꢀ/ꢀJEDEC JS-001
ESDꢁ–ꢁCharged Device Model (CDM) Class C3 ESDAꢀ/ꢀJEDEC JS-002
Standard
ESDꢁ–ꢁHuman Body Model (HBM)
Caution!
ESD-Sensitive Device
MSLꢁ–ꢁMoisture Sensitivity Level
Level 3 IPC/JEDEC J-STD-020
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• SVHC Free
• PFOS Free
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information
contained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All
information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant
information before placing orders for Qorvo products. The information contained herein, or any use of such information does
not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether
with regard to such information itself or anything described by such information. THIS INFORMATION DOES NOT
CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY
DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED
BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical
components in medical, lifesaving, or life-sustaining applications, or other applications where a failure would reasonably be
expected to cause severe personal injury or death.
Copyright 2022 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Data Sheet Rev F, Jan. 10, 2022 | Subject to change without notice
7 of 7
www.qorvo.com
相关型号:
©2020 ICPDF网 联系我们和版权申明