QPL7433TR7 [QORVO]
50 17.5 dB MMIC Gain Block 50 â 3300 MHz;型号: | QPL7433TR7 |
厂家: | Qorvo |
描述: | 50 17.5 dB MMIC Gain Block 50 â 3300 MHz |
文件: | 总13页 (文件大小:2353K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
QPL7433
50ꢀΩ 17.5ꢀdB MMIC Gain Block 50 – 3300ꢀMHz
Classification | UNRESTRICTED
Product Overview
The QPL7433 is a low noise, high gain, wide
bandwidth MMIC pHEMT single ended RF amplifier
IC featuring 17.5dB of flat gain. This IC is designed to
support CPE Front End, Cable, Satellite and
Terrestrial TV, Home Gateways, and Cable Modems
from 50 to 3300ꢀMHz using a single 5ꢀV supply.
QPL7433 offers low noise and distortion plus high
gain in a 2x2 8pin DFN package.
2X2 DFN 8pin Package
Key Features
50ꢀMHz to 3300ꢀMHz Operation
Low Power Consumption 5ꢀV, 90mA
Gain: 17.5ꢀdB over the entire BW
Noise Figure: 1.5ꢀdB Typical
P1dB: 20dBm
Functional Block Diagram
OIP3: +34dBm
Adjustable Bias Using External Resistors
Convenient 2x2, 8pin, DFN Package
RoHS Compliant
Applications
Cable, Terrestrial and Satellite
Extended Spectrum DOCSIS
CATV Node & Amplifiers
Optical Node
Top View
Satellite Low Noise Amplifier
Cable Modem and Set Top Box
Single Ended Gain Block
Ordering Information
Part Number
QPL7433SB
QPL7433SR
QPL7433TR7
Description
Sample bag with 5 pieces
7" Reel with 100 pieces
7" Reel with 2500 pieces
QPL7433PCK-01 50ꢀ–ꢀ3300ꢀMHz PCBA
Data Sheet – Rev D Mar 3, 2021| Subject to change without notice
- 1 of 13 -
© 2021 Qorvo US, Inc.
www.qorvo.com
QPL7433
50ꢀΩ 17.5ꢀdB MMIC Gain Block 50 – 3300ꢀMHz
Classification | UNRESTRICTED
Absolute Maximum Ratings
Parameter
Supply Voltage (VDD
Rating
+10ꢀV
)
Supply Current (IDD
)
120ꢀmA
Maximum Input Level
20 dBm
Operating Temperature Range
Storage Temperature Range
Maximum Junction Temperature
-40 to +85ꢀ°C
−65 to +150ꢀ°C
+150ꢀ°C
Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute Maximum Rating conditions to the device may
reduce device reliability.
Electrical Specifications – 5ꢀV
Parameter
Condition (1)
Min
Typ
5
Max
Unit
V
Supply Voltage (VDD
)
Supply Current (IDD
Frequency Range
Gain
)
90
mA
50
3300
MHz
dB
17.5
20
Reverse Isolation
Input Return Loss
dB
15
dB
Output Return Loss
Noise Figure
OIP2L
15
dB
1.5
57
dB
5ꢀdBmꢀ/ꢀtone output, 50-870 MHz
5ꢀdBmꢀ/ꢀtone output, 1050 MHz
5ꢀdBmꢀ/ꢀtone output, 2550 MHz
5ꢀdBmꢀ/ꢀtone output, 50-870 MHz
5ꢀdBmꢀ/ꢀtone output, 870-2000 MHz
5ꢀdBmꢀ/ꢀtone output, 2000-3000 MHz
50-2000 MHz
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
˚C/W
OIP2H
47
OIP2L
55
OIP3
35
OIP3
33
OIP3
29
OP1dB
19.5
18.5
62
OP1dB
2000-3000 MHz
Thermal Resistance
ΘJC
Notes:
1. Typical performance at these conditions: Temp = +25ꢀ°C, VDD = +5ꢀV, 50ꢀΩ system, Full band unless otherwise noted
Data Sheet – Rev D Mar 3, 2021| Subject to change without notice
- 2 of 13 -
www.qorvo.com
© 2021 Qorvo US, Inc.
QPL7433
50ꢀΩ 17.5ꢀdB MMIC Gain Block 50 – 3300ꢀMHz
Classification | UNRESTRICTED
Evaluation Board Schematic 50ꢀMHz – 3300ꢀMHz____________________________
Notes:
1. L1, C7 tunes input return loss.
2. L2ꢀ, C6 tune output return loss.
3. D1, D2 provide the bias path with RF isolation from the RF output path.
4. C4, C5 provide DC block.
5. R1, R2 and C3 are options that may be added from the input to VDD or to ground to increase
linearity or shed power, trading off degraded noise figure and return loss. Device current can only
be adjusted strictly through R1 and R2.
6. Pin5 is an internal gate voltage adjust and can be left floating at VDD=5V.
Typical Application Schematic, 50ꢀMHz – 3300ꢀMHz_________________________
Data Sheet – Rev D Mar 3, 2021| Subject to change without notice
- 3 of 13 -
www.qorvo.com
© 2021 Qorvo US, Inc.
QPL7433
50ꢀΩ 17.5ꢀdB MMIC Gain Block 50 – 3300ꢀMHz
Classification | UNRESTRICTED
Evaluation Board Bill of Materials________________________________________
Designator
Description
Manufacturer
TTM Technology INC
Qorvo
Part Number
PCB
U1
QPL7433-4000 EVB
QPL7433-4000(A)
QPL7433
QPL7433SB
D1, D2
C6
FER, BEAD, 1.8K, 5%, 200mA, 0402
CAP, 0.5pF, +/-0.1pF, 50V, 0402
TDK
MMZ1005A182ET000
GJM1555C1HR50BB01D
Murata Electronics
C1, C4, C5, C10
CAP, 0.01uF, 10%, 50V, X8L, 0402
IND, 1.3nH, +/-0.1nH, 0402
IND, 1.6nH, +/-0.1nH, 0402
862000-422 CONN, SMA F, 50 Ohm
862000-055 TERM. SOLDER TURRET
Not Populated
Murata Electronics
GCM155L81E103KA37D
LQG15HS1N3B02
LQG15HS1N6B02
142-0701-851
L1
Murata Electronics
L2
Murata Electronics
J3, J4, J6, J7
Cinch Connectivity Solutions
Mouser Electronics, Inc
J1, J2, J5
2533-0-00-44-00-00-07-0
C2, C3, C7, C11, C12, R1, R2, R3, R4
Evaluation Board Assembly Drawing_____________________________________
EVB PCB Material and
Stack-up
Board Material: Rogers
4350B, 4450F, 62mil total
thickness.
ε r = 3.66
Plating: 1.0 oz Copper
Board Dimension: 0.810" x
1.450"
Data Sheet – Rev D Mar 3, 2021| Subject to change without notice
- 4 of 13 -
www.qorvo.com
© 2021 Qorvo US, Inc.
QPL7433
50ꢀΩ 17.5ꢀdB MMIC Gain Block 50 – 3300ꢀMHz
Classification | UNRESTRICTED
Performance Data at 5ꢀV_______________________________________________
Input Return Loss vs Temp
Output Return Loss vs Temp
0
-5
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-10
-15
-20
-25
-30
-35
-40
-45
-40degC
85degC
25degC
100degC
-40degC
85degC
25degC
100degC
0
1000
2000
Freq (MHz)
3000
4000
0
1000
2000
3000
4000
Freq (MHz)
Gain vs Temp
Reverse Isolation vs Temp
20
19
18
17
16
15
14
0
-5
-10
-15
-20
-25
-30
-40degC
85degC
25degC
100degC
-40degC
85degC
25degC
100degC
0
1000
2000
Freq (MHz)
3000
4000
Freq (MHz)
2000
0
1000
3000
4000
OP1dB vs Freq
OIP3 vs Freq
21
20
19
18
17
16
15
14
38
36
34
32
30
28
26
-40degC
25degC
85degC
100degC
-40degC
25degC
85degC
100degC
0
500
1000
1500
Freq (MHz)
2000
2500
3000
0
500
1000
1500
Freq (MHz)
2000
2500
3000
Data Sheet – Rev D Mar 3, 2021| Subject to change without notice
- 5 of 13 -
© 2021 Qorvo US, Inc.
www.qorvo.com
QPL7433
50ꢀΩ 17.5ꢀdB MMIC Gain Block 50 – 3300ꢀMHz
Classification | UNRESTRICTED
Performance Data at 5ꢀV (cont’d)________________________________________
OIP2L vs Freq
OIP2H vs Freq
65
60
55
50
45
40
35
75
70
65
60
55
50
45
-40degC
85degC
25degC
-40degC
85degC
25degC
100degC
100degC
0
500
1000
1500
2000
2500
3000
0
500
1000
1500
2000
2500
3000
Freq (MHz)
Freq (MHz)
Noise Figure vs Temp
Supply Current vs Temp at 5V
100
98
96
94
92
90
88
86
84
82
4
-40degC
85degC
25degC
3.5
100degC
3
2.5
2
1.5
1
0.5
0
-40
-20
0
20
40
60
80
100
50
600
1150
1700
2250
2800
3350
Temp degC
Freq (MHz)
Notes:
1.VDD = +5ꢀV, 50ꢀΩ system
2.OIP3: +5ꢀdBmꢀ/ꢀtone output, 5MHz spacing
3.OIP2: 5ꢀdBmꢀ/ꢀtone output, 53MHz spacing
Data Sheet – Rev D Mar 3, 2021| Subject to change without notice
- 6 of 13 -
© 2021 Qorvo US, Inc.
www.qorvo.com
QPL7433
50ꢀΩ 17.5ꢀdB MMIC Gain Block 50 – 3300ꢀMHz
Classification | UNRESTRICTED
Additional Applications – Bias Resistor Options_____________________________
Pullup or pulldown resistors may be used to change the bias current (IDD ) for a given bias voltage (VDD). Refer to the EVB
schematic on Page 3. IDD must not exceed 120mA and the junction temperature can not exceed 150ꢀ°C at the maximum
ambient operating temperature. Note that for some cases, return loss may need to be reoptimized by adjusting L1, L2, C7
and C6.
4V
5V
6V
7V
8V
IDD (mA)
R1
R2
DNP
R1
R2
R1
R2
R1
R2
R1
R2
100
90
80
70
60
45
121.0K
220.0K
590.0K
DNP
390.0K
DNP
DNP
DNP
DNP
DNP
DNP
DNP
DNP
DNP
DNP
DNP
DNP
100K
47.0K
28.0K
22.0K
16.2K
11.0K
DNP
DNP
DNP
DNP
DNP
DNP
36.5K
24.3K
18.2K
15.0K
12.0K
8.66K
DNP
DNP
DNP
DNP
DNP
DNP
24.3K
16.9K
13.7K
11.0K
9.90K
6.98K
DNP
DNP
DNP
60.4K
40.2K
28.0K
16.9K
220.0K
68.0K
27.4K
DNP
DNP
Gain vs Frequency at 5V
Reverse Isolation vs Frequency at 5V
-10
-12
-14
-16
-18
-20
-22
-24
-26
-28
-30
20
18
16
14
12
10
8
6
45mA
70mA
90mA
60mA
80mA
100mA
45mA
70mA
90mA
60mA
4
80mA
2
100mA
0
0
0
500
1000 1500 2000 2500 3000 3500 4000
Frequency (MHz)
500
1000 1500 2000 2500 3000 3500 4000
Frequency (MHz)
Input Return Loss vs Frequency at 5V
Output Return Loss vs Frequency at 5V
0
-5
0
-5
-10
-15
-20
-25
-30
-35
-40
-10
-15
-20
-25
-30
-35
-40
-45
45mA
70mA
90mA
60mA
80mA
100mA
45mA
70mA
90mA
60mA
80mA
100mA
-45
0
0
1000
2000
3000
4000
1000
2000
3000
4000
Frequency (MHz)
Frequency (MHz)
Notes:
(1) VDD = +5ꢀV, 50ꢀΩ system
Data Sheet – Rev D Mar 3, 2021| Subject to change without notice
- 7 of 13 -
© 2021 Qorvo US, Inc.
www.qorvo.com
QPL7433
50ꢀΩ 17.5ꢀdB MMIC Gain Block 50 – 3300ꢀMHz
Classification | UNRESTRICTED
Additional Applications, cont’d – Bias Resistor Options____________________
OP1dB vs Frequency at 5V
OP1dB vs Frequency at 90mA
25
20
15
10
5
25
20
15
10
5
45mA
70mA
90mA
60mA
80mA
100mA
4V
7V
5V
8V
6V
0
0
0
1000
2000
Frequency (MHz)
3000
4000
0
1000
2000
Frequency (MHz)
3000
4000
OIP3 vs Frequency at 5V
OIP3 vs Frequency at 90mA
40
40
35
30
25
20
15
10
5
35
30
25
20
15
10
5
45mA
70mA
90mA
60mA
80mA
100mA
4V
7V
5V
8V
6V
0
0
0
1000
2000
3000
4000
0
1000
2000
Frequency (MHz)
3000
4000
Frequency (MHz)
Notes:
(1) VDD = +5ꢀV, 50ꢀΩ system
(2) OIP3: +5ꢀdBmꢀ/ꢀtone output, 5MHz spacing
Data Sheet – Rev D Mar 3, 2021| Subject to change without notice
- 8 of 13 -
© 2021 Qorvo US, Inc.
www.qorvo.com
QPL7433
50ꢀΩ 17.5ꢀdB MMIC Gain Block 50 – 3300ꢀMHz
Classification | UNRESTRICTED
Additional Applications, cont’d – Bias Resistor Options______________________
OIP2 Lower vs Frequency at 90mA
OIP2 Lower vs Frequency at 5V
70
60
50
40
30
20
10
0
80
70
60
50
40
30
20
10
0
4V
7V
5V
8V
6V
45mA
70mA
90mA
60mA
80mA
100mA
0
1000
2000
Frequency (MHz)
3000
4000
0
1000
2000
3000
4000
Frequency (MHz)
OIP2 Upper vs Frequency at 5V
OIP2 Upper vs Frequency at 90mA
70
60
50
40
30
20
10
0
70
60
50
40
30
20
10
0
45mA
60mA
80mA
100mA
4V
7V
5V
8V
6V
70mA
90mA
0
1000
2000
Frequency (MHz)
3000
4000
0
1000
2000
Frequency (MHz)
3000
4000
Notes:
(1) VDD = +5ꢀV, 50ꢀΩ system
(2) OIP2: +5ꢀdBmꢀ/ꢀtone output, 53MHz spacing
Data Sheet – Rev D Mar 3, 2021| Subject to change without notice
- 9 of 13 -
www.qorvo.com
© 2021 Qorvo US, Inc.
QPL7433
50ꢀΩ 17.5ꢀdB MMIC Gain Block 50 – 3300ꢀMHz
Classification | UNRESTRICTED
PinConfiguration and Description________________________________________
Top View
Pin Number
Label
RF IN
GND
Description
2
RF Input, DC blocking capacitor required
Internally Not Connected
1,3,4,6,8
7
5
RF OUT / VDD RF Output – VDD bias Ferrite Bead required
VG2
Gate Voltage adjust. Leave as no connect.
Ground. Use recommended via pattern to minimize inductance and thermal resistance. See PCB
Mounting Pattern for suggested footprint.
Backside Paddle
GND
Data Sheet – Rev D Mar 3, 2021| Subject to change without notice
- 10 of 13 -
www.qorvo.com
© 2021 Qorvo US, Inc.
QPL7433
50ꢀΩ 17.5ꢀdB MMIC Gain Block 50 – 3300ꢀMHz
Classification | UNRESTRICTED
Package Marking Dimensions____________________________________________
Package Outline______________________________________________________
Notes:
1. All dimensions in millimeters. Angles are in degrees.
2. Except where noted, this part outline confroms to JEDEC standard MO-220, Isse E ( Variation VGGC ) for thermally enhanced
Plastic very thin fine pitch dual flat no lead package ( DFN )
3. Dimension and tolerance formats conform to ASME Y14.4M-1994.
4. The termianl #1 identifier and termianl numbering conforms to JESD 95-1 SPP-012.
Data Sheet – Rev D Mar 3, 2021| Subject to change without notice
- 11 of 13 -
www.qorvo.com
© 2021 Qorvo US, Inc.
QPL7433
50ꢀΩ 17.5ꢀdB MMIC Gain Block 50 – 3300ꢀMHz
Classification | UNRESTRICTED
Recommended Mounting Pattern
Notes:
1. All dimensions are in millimeters (inches). Angles are in degrees.
2. Use 1 oz copper minimum for top and bottom layer.
3. Via holes are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We recommend a
0.35mm diameter bit for drilling via holes and a final plated thru diameter of 0.25mm.
4. All dimensions are in millimeters (inches). Angles are in degrees.
Data Sheet – Rev D Mar 3, 2021| Subject to change without notice
- 12 of 13 -
www.qorvo.com
© 2021 Qorvo US, Inc.
QPL7433
50ꢀΩ 17.5ꢀdB MMIC Gain Block 50 – 3300ꢀMHz
Classification | UNRESTRICTED
Handling Precautions_________________________________________________
Parameter
ESDꢀ–ꢀHuman Body Model (HBM)
Rating
Standard
1B (500V) ANSI / ESDAꢁ/ꢁJEDEC JS-001
Caution!
ESD-Sensitive Device
ESDꢀ–ꢀCharged Device Model (CDM) C3 (1000V) ANSI / ESDAꢁ/ꢁJEDEC JS-002
MSLꢀ–ꢀMoisture Sensitivity Level MSL3 IPC / JEDEC J-STD-020
Solderability________________________________________________________
Compatible with both lead-free (260ꢀ°C max. reflow temp.) and tinꢀ/ꢀlead (245ꢀ°C max. reflow temp.) soldering processes.
Solder profiles available upon request.
Contact plating: NiPdAu
RoHS Compliance____________________________________________________
This part is compliant with 2011ꢀ/ꢀ65ꢀ/ꢀEU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015ꢀ/ꢀ863ꢀ/ꢀEU.
This product also has the following attributes:
Lead Free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
Pb
SVHC Free
Contact Information__________________________________________________
For the latest specifications, additional product information, worldwide sales and distribution locations:
Tel: 1-844-890-8163
Web: www.qorvo.com
Email: customer.support@qorvo.com
Important Notice_____________________________________________________
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party
any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described
by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS
DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS
WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR
OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in
medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe
personal injury or death.
Copyright 2020 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Data Sheet – Rev D Mar 3, 2021| Subject to change without notice
- 13 of 13 -
www.qorvo.com
© 2021 Qorvo US, Inc.
相关型号:
©2020 ICPDF网 联系我们和版权申明