QPB7400-4000(B) [QORVO]
CATV 75 Adjustable Low Gain (9â11dB) RF Amplifier;型号: | QPB7400-4000(B) |
厂家: | Qorvo |
描述: | CATV 75 Adjustable Low Gain (9â11dB) RF Amplifier 有线电视 |
文件: | 总13页 (文件大小:962K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
QPB7400
®
CATV 75Ω Adjustable Low Gain (9–11dB) RF Amplifier
Product Overview
The QPB7400 is a low-cost RF amplifier designed for
applications from 47 to 1218ꢀMHz. The balance of low
noise and distortion provides an ideal solution for a wide
range of broadband amplifiers used in cable television
applications such as optical receivers and low noise
front ends.
3-pin SOT-89 Package
The QPB7400 has features allowing a great deal of
design-in flexibility. Gain and return loss are adjustable
with an external feedback resistor. An internal bias
circuit mitigates the effect of temperature and process
variation and an external resistor may be used to adjust
the bias current to optimize distortion or noise
performance.
Key Features
• Gain, return loss, and bias externally adjustable
• 47–1218ꢀMHz bandwidth (DOCSIS 3.1 Compatible)
• CCNꢀ–ꢀ65ꢀdBc, CSO–70ꢀdBc, and CTB–77ꢀdBc for
33ꢀdBmVꢀ/ꢀch at output (-6ꢀdB for QAM), 80 NTSC + 108
QAM, flat loading
The QPB7400 is fabricated using 6-inch GaAs pHEMT
technology to optimize performance and cost. It
provides excellent gain and return loss consistency
inherent to the pHEMT process.
• +5ꢀV Biasing, 105ꢀmA Current Consumption
• On-chip active bias for consistent bias current and
repeatable performance over temperature
• Low Noise: 3.5ꢀdB to 1218ꢀMHz
• +41ꢀdBm typical OIP3
• +60ꢀdBm typical OIP2
Functional Block Diagram
• pHEMT device technology
Applications
• Single-ended and Push-Pull Optical Receivers
• Low-noise Drop Amplifiers
• Distribution Amplifiers
• Multi-Dwelling Units
• Single-ended Gain Block
Top View
Ordering Information
Part No.
Description
QPB7400SQ
QPB7400SR
QPB7400TR13
QPB7400PCK
Sample bag with 25 pieces
7” reel with 100 pieces
13” reel with 2500 pieces
PCBA with 5 piece sample bag
Data Sheet –Rev E, April 6, 2018 | Subject to change without notice
- 1 of 13 -
www.qorvo.com
QPB7400
®
CATV 75Ω Adjustable Low Gain (9–11dB) RF Amplifier
Absolute Maximum Ratings
Recommended Operating Conditions
Parameter
Rating
+7ꢀV
Parameter
Min
Typ
Max Units
Supply Voltage (VDD)
Supply Current ( IDD)
Maximum Input Level
Operating Temperature Range
Tj for>106 hours MTTF
Storage Temperature
Supply Voltage (VDD)
Supply Current ( IDD)
+4.5
+5.5
V
130mA
105
mA
60dBmV
-40 to +100°C
+165ꢀ°C
Electrical specifications are measured at specified test
conditions. Specifications are not guaranteed over all
recommended operating conditions.
-65 to +150ꢀ°C
Operation of this device outside the parameter ranges given
above may cause permanent damage.
Electrical Specifications
Parameter
Frequency Range
Gain
Conditionꢀ(1)
Min
Typ
Max
Unit
MHz
dB
47
1218
+10.5
−0.5
+3.5
+18
Gain Slope
dB
Noise Figure
Input Return Loss
Output Return Loss
Output P1dB
Output IP2
dB
dB
+18
dB
+17
dBm
dBm
dBm
f1ꢀ=ꢀ225ꢀMHz, f2ꢀ=ꢀ325ꢀMHz, Poutꢀ= +5ꢀdBmꢀ/ꢀtone
f1ꢀ=ꢀ225ꢀMHz, f2ꢀ=ꢀ325ꢀMHz, Poutꢀ= +5ꢀdBmꢀ/ꢀtone
+60
Output IP3
+41
CSO
CTB
CCN
−70
−80
33ꢀdBmVꢀ/ꢀch at output, flat loading (−6ꢀdB for QAM), 80ꢀch
NTSC + 108 QAM to 1218ꢀMHz
dBc
−65
Thermal Resistance
Notes:
Junction to case
+42
°Cꢁ/ꢁW
1. Typical performance at these conditions: Temp. = +25ꢀ°C, VDD = +5ꢀV, 75ꢀΩ system
Data Sheet –Rev E, April 6, 2018 | Subject to change without notice
- 2 of 13 -
www.qorvo.com
QPB7400
®
CATV 75Ω Adjustable Low Gain (9–11dB) RF Amplifier
Evaluation Board Schematic
Data Sheet –Rev E, April 6, 2018 | Subject to change without notice
- 3 of 13 -
www.qorvo.com
QPB7400
®
CATV 75Ω Adjustable Low Gain (9–11dB) RF Amplifier
Bill of Materials (BOM)
Description
QPB7400 Low Gain GP CATV Amplifier U1
Designator Manufacturer
Qorvo
Part Number
QPB7400SB
PCB, QPB7400
Viasystems Technologies Corp., L.L. QPB7400-4000(B)
CAP, 1000ꢀpF, 10ꢀ%, 50ꢀV, 0402
CAP, 1ꢀpF ±0.10ꢀpF, 50ꢀV, 0402
C1, C3
C4
Murata Electronics
AVX/Kyocera Asia, Ltd
Murata Electronics
Murata Electronics
GRM155R71H102KA01D
04025A1R0BAT2A
CAP, 10000ꢀpF, 10ꢀ%, 50ꢀV, X7R, 0402 C5
GRM155R71H103KA88D
IND, 3.9ꢀnH,5%, Ceramic, Lead-free,
L1
LL1005-FHL3N9S
0402
IND, 5.6ꢀnH, +/-.5, LF Ceramic, 0402
Ferrite Bead, 1.8ꢀKꢀΩ, 200ꢀmA, 0402
Ferrite Bead, 470ꢀΩ, 200ꢀmA, 0402
Solder Turret
L3
Murata Electronics
LL1005-FHL5N6S
B1
Murata Electronics
BLM15HD182SN1D
BLM15GG471SN1D
2533-0-00-44-00-00-07-0
LTI-FSF55NT-P
L2
Murata Electronics
J3, J4
J1, J2
C2, R1
Mill-Max Manufacturing
Lighthorse Technologies
Connector 75ꢀΩ, Edge Launch F
Not Populated
Data Sheet –Rev E, April 6, 2018 | Subject to change without notice
- 4 of 13 -
www.qorvo.com
QPB7400
®
CATV 75Ω Adjustable Low Gain (9–11dB) RF Amplifier
Evaluation Board Assembly Drawing
Data Sheet –Rev E, April 6, 2018 | Subject to change without notice
- 5 of 13 -
www.qorvo.com
QPB7400
®
CATV 75Ω Adjustable Low Gain (9–11dB) RF Amplifier
Typical Application Schematic, 47MHz – 1218MHz
Notes:
1. L1/L2 tunes input return loss (L2 helps tune low frequencies).
2. C1 and C3 are for DC blocking
3. L3/C4 tunes output return loss.
4. B1 is a broadband impedance choke for DC bias.
5. R1 and C2 are optional feedback that can be added to reduce to gain to as low as 7.5dB (typ. gain of 10.5dB with no feedback)
6. R2 is an optional pullup that can be added to adjust the bias current to trade off distortion for noise performance.
7. Typical performance reperesented is with no feedback or pullup/pulldown.
Data Sheet –Rev E, April 6, 2018 | Subject to change without notice
- 6 of 13 -
www.qorvo.com
QPB7400
®
CATV 75Ω Adjustable Low Gain (9–11dB) RF Amplifier
Performance Data – 5V
Notes:
(1) OIP3: Pout = +5dBm/tone
Data Sheet –Rev E, April 6, 2018 | Subject to change without notice
- 7 of 13 -
www.qorvo.com
QPB7400
®
CATV 75Ω Adjustable Low Gain (9–11dB) RF Amplifier
Performance Data – 5V
Notes:
(1) OIP2: Poutꢀ= +5ꢀdBmꢀ/ꢀtone
(2) 33ꢀdBmVꢀ/ꢀch at output, flat loading (−6ꢀdB for QAM), 80ꢀch NTSC + 108 QAM to 1218ꢀMHz
Data Sheet –Rev E, April 6, 2018 | Subject to change without notice
- 8 of 13 -
www.qorvo.com
QPB7400
®
CATV 75Ω Adjustable Low Gain (9–11dB) RF Amplifier
Pin Configuration and Description
Pin Number
Label
Description
1
RF IN
RF Inputꢀ–ꢀDC blocking capacitor required
2
3
GND
GNDꢀ–ꢀꢀDC, RF, and Thermal
RF OUT/VDD
RF Outputꢀ–ꢀVDD bias choke required
Data Sheet –Rev E, April 6, 2018 | Subject to change without notice
- 9 of 13 -
www.qorvo.com
QPB7400
®
CATV 75Ω Adjustable Low Gain (9–11dB) RF Amplifier
Package Marking
Data Sheet –Rev E, April 6, 2018 | Subject to change without notice
- 10 of 13 -
www.qorvo.com
QPB7400
®
CATV 75Ω Adjustable Low Gain (9–11dB) RF Amplifier
Package Outline
Notes:
1. Dimensions in millimeters
Data Sheet –Rev E, April 6, 2018 | Subject to change without notice
- 11 of 13 -
www.qorvo.com
QPB7400
®
CATV 75Ω Adjustable Low Gain (9–11dB) RF Amplifier
PCB Mounting Pattern
Notes:
1. Ground/thermal vias are critical for the proper performance of this device. Vias should use a .35ꢀmm (#80ꢀ/.0135’) diameter drill
and have a final, plated thru diameter of 0.25ꢀmm (0.010”).
2. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance.
3. RF trace width depends upon the PC board material and construction.
4. All dimensions are in millimeters (inches). Angles are in degrees.
Data Sheet –Rev E, April 6, 2018 | Subject to change without notice
- 12 of 13 -
www.qorvo.com
QPB7400
®
CATV 75Ω Adjustable Low Gain (9–11dB) RF Amplifier
Handling Precautions
Parameter
Rating
Standard
ESDAꢁ/ꢁJEDEC JS-001-
2014
ESDꢀ–ꢀHuman Body Model (HBM)
Class 1B (500-1000V)
Caution!
ESD-Sensitive Device
ESDꢀ–ꢀCharged Device Model (CDM) Class C3 (>1000V)
JEDEC JESD22-C101F
IPC/JEDEC J-STD-020
MSL1–ꢀMoisture Sensitivity Level
Level 1
Solderability
Compatible with both lead-free (260ꢀ°C max. reflow temp.) and tin/lead (245ꢀ°C max. reflow temp.) soldering processes.
Solder profiles available upon request.
Contact plating: NiPdAu
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive.
This product also has the following attributes:
• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• PFOS Free
• SVHC Free
Pb
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Tel: 1-844-890-8163
Web: www.qorvo.com
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2018 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Data Sheet –Rev E, April 6, 2018 | Subject to change without notice
- 13 of 13 -
www.qorvo.com
相关型号:
©2020 ICPDF网 联系我们和版权申明