QPA9942EVB-01 [QORVO]
3300 - 3800 MHz 4 W High-Efficiency Amplifier;
| 型号： | QPA9942EVB-01 |
| 厂家： | 
Qorvo |
| 描述： | 3300 - 3800 MHz 4 W High-Efficiency Amplifier |
| 文件： | 总14页 (文件大小：1655K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
QPA9942
®
3300 - 3800 MHz 4 W High-Efficiency Amplifier
Product Overview
The QPA9942 is a high-efficiency, linearizable power
amplifier targeting Band 42 small-cell wireless
infrastructure
systems. Using InGaP/GaAs
HBT
technology, the product delivers high efficiency of 25.6% at
+28dBm average output power while providing excellent
DPD linearized ACPR of -50dBc for wide band 5G signals.
16 Pad 5 xꢀ5ꢀmm Package
The QPA9942 is housed in a 5x5mm SMT package. It is
pin-to-pin compatible to QPA9901, QPA9903 and
QPA9908 (high-efficiency small cell PA).
Key Features
• 3300ꢁ–ꢁ3800ꢁMHz
• 31 dB gain typical cross the band
• Over 35.3 dBm P3dB
• 25.6% PAE at +28 dBm power output
• <-50 dBc ACPR DPD linearized at +28 dBm Pout
• 1.8V logic compatible PA ON/OFF control
• On chip ESD protection
• 5ꢁxꢁ5ꢁmm Package
Functional Block Diagram
Applications
• 4G/5G Small-cell BTS
• 5G M-MIMO
• Repeaters / DAS
• Mobile Infrastructure
• General Purpose Wireless
Ordering Information
Part No.
Description
Top View
QPA9942TR13
QPA9942EVB-01
2500 pcs on a 13” reel
3300-3800 MHz EVB
Datasheet, Aug. 6th, 2021 | Subject to change without notice.
1 of 14
www.qorvo.com
QPA9942
®
3300 - 3800 MHz 4 W High-Efficiency Amplifier
Absolute Maximum Ratings
Recommended Operating Conditions
Parameter
Rating
-55 to +125 °C
+10 dBm
Parameter
Device Voltage (VCC
TCASE
Min
+4.75
-40
Typ
Max Units
)
+5
+5.25
+105
+175
V
Storage Temperature
RF Input Power, Pulsed CW, 50 Ω(1)
°C
°C
Tj for > 106 hours MTTF
Device Voltage (VCC
)
+5.5 V
Exceeding any one or a combination of the Absolute Maximum Rating
conditions may cause permanent damage to the device. Extended
application of Absolute Maximum Rating conditions to the device may
reduce device reliability.
Electrical specifications are measured at specified test conditions.
Specifications are not guaranteed over all recommended operating
conditions.
Note:
1. 3300-3800 MHz, Pulsed CW, 10% duty cycle, 100us period
Electrical Specifications
Parameter
Conditions (1)
Min
Typ
Max
Units
MHz
MHz
dB
Operational Frequency Range
3300
3800
Test Frequency
Gain (2)
3500
31
At +28dBm Pout and room temperature
28
Input Return Loss
-12
-7
dB
Output Return Loss
Output P3dB
dB
10 μs pulse width, 10% duty cycle
Poutꢁ=ꢁ+28ꢁdBm
34
23
35.3
25.6
-30
-27
-50
84.3
492
20.3
1.8
0
dBm
%
Power Added Efficiency (2)
ACPR (Uncorrected) (2)
ACPR (Uncorrected)ꢁ(3)
ACPR (Corrected)ꢁ(3)
Quiescent Current, ICQ
Total Operating Current
Poutꢁ=ꢁ+28ꢁdBm
-23
dBc
dBc
dBc
mA
Poutꢁ=ꢁ+28ꢁdBm
Poutꢁ=ꢁ+28ꢁdBm
Pin 12, 14 and 16
Pin 5, 12, 14 and 16, Pout = +28 dBm
Junction to case
mA
oC/W
Thermal Resistance, θjc
VEN High
1.17
0
VCC
V
VEN Low
0.63
V
2nd Harmonic
3rd Harmonic
Notes:
Poutꢁ=ꢁ+28ꢁdBm
Poutꢁ=ꢁ+28ꢁdBm
-41
-48
dBc
dBc
1. Test conditions unless otherwise noted: All VCC & VBIAS = +5.0 V, VEN = +1.8V, Temp = +25 °C, 50 Ω system.
2. LTE, 20 MHz E-UTRA Test Model 1.1 or 3.1, PAR = 8.5 dB at 0.01% Probability.
3. NR, 1x100 MHz E-UTRA Test Model 3.1, PAR = 8.5 dB at 0.01% Probability.
Power Amplifier Enable Logic Table
Parameter
High
Low
Power Amplifier OFF
VEN
Power Amplifier On
Datasheet, Aug. 6th, 2021 | Subject to change without notice.
2 of 14
www.qorvo.com
QPA9942
®
3300 - 3800 MHz 4 W High-Efficiency Amplifier
3300–3800 MHz Evaluation Board
Notes:
1. See Evaluation Board PCB Information for material and stack up.
Bill of Materials – QPA9942EVB-01
Reference Des.
U1
Value
-
Description
Amplifier, QPA9942 3300-3800 MHz, High-Efficiency
CAP,100 pF, 0603, 5%, 50V, C0G
Manufacturer
Qorvo
Part Number
QPA9942
C1, C2
100pF
various
C5, C9, C13, C17, C19
C4, C8, C12, C18, C20
C3, C7, C14
L1, L2
1000 pF CAP,1000 pF, 0603, 5%, 50V, C0G
various
0.1 µF
CAP,0.1 µF, 0603, 10%, 50V, X7R
CAP, 10 µF, 1206, 25V
various
10 µF
various
0 Ω
RES 0 Ω, 0603, 1/16W, Chip
CONN. RF. SMA. F. STRT. Edge Mount
Connector, 5 Pin
various
J1, J2
various
-
-
J3, J4
various
Datasheet, Aug. 6th, 2021 | Subject to change without notice.
3 of 14
www.qorvo.com
QPA9942
®
3300 - 3800 MHz 4 W High-Efficiency Amplifier
Performance Plots - LTE
Test conditions unless otherwise noted: VBIASꢁ=ꢁ5ꢁV, VCC1,2,3ꢁ=ꢁ5ꢁV, VENꢁ=ꢁ1.8ꢁV, T = +25°C, tested using a single-carrier, 20 MHz LTE
signal with 8.5 dB PAR at 0.01% CCDF on a reference design fixture.
Datasheet, Aug. 6th, 2021 | Subject to change without notice.
4 of 14
www.qorvo.com
QPA9942
®
3300 - 3800 MHz 4 W High-Efficiency Amplifier
Performance Plots - LTE
Test conditions unless otherwise noted: VBIASꢁ=ꢁ5ꢁV, VCC1,2,3ꢁ=ꢁ5ꢁV, VENꢁ=ꢁ1.8ꢁV, tested at 3500 MHz using a single-carrier, 20 MHz LTE
signal with 8.5 dB PAR at 0.01% CCDF on a reference design fixture.
Datasheet, Aug. 6th, 2021 | Subject to change without notice.
5 of 14
www.qorvo.com
QPA9942
®
3300 - 3800 MHz 4 W High-Efficiency Amplifier
Performance Plots - Pulse
Test conditions unless otherwise noted: VBIASꢁ=ꢁ5ꢁV, VCC1,2,3ꢁ=ꢁ5ꢁV, VENꢁ=ꢁ1.8ꢁV, T = +25°C, tested using a pulse signal, 10% duty cycle.
Test conditions unless otherwise noted: VBIASꢁ=ꢁ5ꢁV, VCC1,2,3ꢁ=ꢁ5ꢁV, VENꢁ=ꢁ1.8ꢁV, tested at 3500 MHz using a pulse signal, 10% duty cycle.
Datasheet, Aug. 6th, 2021 | Subject to change without notice.
6 of 14
www.qorvo.com
QPA9942
®
3300 - 3800 MHz 4 W High-Efficiency Amplifier
Performance Plots – S-parameters
Test conditions unless otherwise noted: VBIASꢁ=ꢁ5ꢁV, VCC1,2,3ꢁ=ꢁ5ꢁV, VENꢁ=ꢁ1.8ꢁV.
Datasheet, Aug. 6th, 2021 | Subject to change without notice.
7 of 14
www.qorvo.com
QPA9942
®
3300 - 3800 MHz 4 W High-Efficiency Amplifier
Pad Configuration and Description
Top View
Pad No.
Label
Description
1, 3, 4, 7, 8, 10, 11, GND
13, 15
Ground connection.
2
5
6
9
RFIN
VBIAS
VEN
RF input, internally matched to 50Ω.
Bias circuit supply voltage
Amplifier enable voltage (regulated internally)
RFOUT
RF output, internally matched to 50Ω. It has low impedance at DC. An external series capacitor is
required if high impedance is needed at DC.
12
VCC3
VCC2
VCC1
GND
Supply voltage for the various amplifier stages
Supply voltage for the various amplifier stages
Driver stage supply voltage
14
16
Backside Paddle
Ground connection. The back side of the package should be connected to the ground plan though
as short of a connection as possible. PCB via holes under the device are recommended.
Datasheet, Aug. 6th, 2021 | Subject to change without notice.
8 of 14
www.qorvo.com
QPA9942
®
3300 - 3800 MHz 4 W High-Efficiency Amplifier
Package Marking and Dimensions
Marking: Pin 1 Indicator and Qorvo Logo
Part Number – QPA9942
Trace Codeꢁ–ꢁXXXXXX Up to 8 Characters to be Assigned by sub-Contractor
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.
3. Contact plating: ENEPIG (Electroless Nickel Electroless Palladium Immersion Gold)
PCB Mounting Pattern
Datasheet, Aug. 6th, 2021 | Subject to change without notice.
9 of 14
www.qorvo.com
QPA9942
®
3300 - 3800 MHz 4 W High-Efficiency Amplifier
Evaluation Board PCB Information
PC Board Layout
PCB Material (stackup)
Layer
Name
Material
Thickness
Constant
3.5
1
2
3
4
5
Top Overlay
Top Solder
Top Layer
Dielectric1
Bottom Layer
Solder Resist
Copper
RO4350
Copper
0.40 mil
1.40 mil
20.00 mil
1.40 mil
3.48
Total thickness: 23.2mill
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Use 1 oz. copper minimum for top and bottom layer metal.
3. Via holes are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We recommend a 0.35mm
(#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.10”).
4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance.
Datasheet, Aug. 6th, 2021 | Subject to change without notice.
10 of 14
www.qorvo.com
QPA9942
®
3300 - 3800 MHz 4 W High-Efficiency Amplifier
Tape and Reel Information – Carrier and Cover Tape Dimensions
Tape and reel specifications for this part are also available on the Qorvo website.
Standard T/R size = 2500 pieces on a 13” reel.
Feature
Measure
Symbol
Size (in)
0.209
0.209
0.051
0.315
0.079
0.217
0.362
0.472
Size (mm)
Length
A0
B0
K0
P1
P2
F
5.3
5.3
1.3
8.0
2.0
5.5
9.2
12
Width
Cavity
Depth
Pitch
Cavity to Perforation - Length Direction
Centerline Distance
Cavity to Perforation - Width Direction
Cover Tape
Carrier Tape
Width
Width
C
W
Datasheet, Aug. 6th, 2021 | Subject to change without notice.
11 of 14
www.qorvo.com
QPA9942
®
3300 - 3800 MHz 4 W High-Efficiency Amplifier
Tape and Reel Information – Reel Dimensions
Packaging reels are used to prevent damage to devices during shipping and storage, loaded carrier tape is typically wound onto a plastic
take-up reel. The reel size is 13" diameter. The reels are made from high-impact injection-molded polystyrene (HIPS), which offers
mechanical and ESD protection to packaged devices.
Feature
Measure
Symbol
Size (in)
12.992
0.717
Size (mm)
330.00
18.20
Diameter
A
W2
W1
N
Flange
Thickness
Space Between Flange
Outer Diameter
Arbor Hole Diameter
Key Slit Width
Key Slit Diameter
0.504
12.80
4.016
102.00
13.00
C
0.512
Hub
B
0.079
2.00
D
0.795
20.20
Tape and Reel Information – Tape Length and Label Placement
Notes:
1. Empty part cavities at the trailing and leading ends are sealed with cover tape. See EIA 481.
2. Labels are placed on the flange opposite the sprockets in the carrier tape.
Datasheet, Aug. 6th, 2021 | Subject to change without notice.
12 of 14
www.qorvo.com
QPA9942
®
3300 - 3800 MHz 4 W High-Efficiency Amplifier
Recommended Solder Temperature Profile
Datasheet, Aug. 6th, 2021 | Subject to change without notice.
13 of 14
www.qorvo.com
QPA9942
®
3300 - 3800 MHz 4 W High-Efficiency Amplifier
Handling Precautions
Parameter
Rating
Standard
ESDꢁ–ꢁHuman Body Model (HBM)
Class 1C
ESDAꢀ/ꢀJEDEC JS-001-2012
JEDEC JESD22-C101F
IPC/JEDEC J-STD-020
Caution!
ESD-Sensitive Device
ESDꢁ–ꢁCharged Device Model (CDM) Class C3
MSLꢁ–ꢁMoisture Sensitivity Level
Level 3
Solderability
Compatible with both lead-free (260°C max. reflow temp.) and tin/lead (245°C max. reflow temp.) soldering processes.
Solder profiles available upon request.
Contact plating: ENEPIG (Electroless Nickel Electroless Palladium Immersion Gold)
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
• Product uses RoHS Exemption 7c-I to meet RoHS Compliance requirements.
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• PFOS Free
• SVHC Free
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
For technical questions and application information:
Email: appsupport@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2021 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Datasheet, Aug. 6th, 2021 | Subject to change without notice.
14 of 14
www.qorvo.com
相关型号：
©2020 ICPDF网 联系我们和版权申明